Budget planning in Netweaver ECC 6.x

We had registered sales & manufacturing plans (yearly forecast) into logistics transactions (like MC86), also into the ECC exists the sales price lists, boms and manufacturing costs.
What we need is, identify the transactions in ECC 6.0 let us calculate and link the budget amounts based on forecast units registered on logistics transactions to G/L accounts. And also the best practice for this process.
Thanks in advance,

Spoke to Keith Harmon who explained that the functionality has been removed. The manual work around is to copy and paste the figure from the unreleased column.
Edited by: Paul Abrahamson on Apr 9, 2008 1:04 PM

Similar Messages

  • Manual Budget Planning with Budget Control System

    Hi Friends,
    The below scenario i have found in Periodic/Closing Operations:                                        
    What is the purpose of Manual Budget Planning with Budget Control System
    Can anybody provide the link or document with configuration for above scenario
    Thanks
    Venkat
    Edited by: venkata raju khottari on Feb 14, 2009 2:52 PM

    Dear venkata raju khottari,
    Budget control is one part of Project System.  Normally we have two types of Budgets one Budget for CAPEX and Budget for Over Head expnes.  Max companies PS will take care by the Budgets.  If u need any information let me know.
    thanqu
    raj

  • SNP Planned Orders to ECC Process Orders - no PPDS

    Hello Gurus,
    Is there a way to covert an SNP Planned orders to ECC Prod. orders? Can one switch off the PPDS in APO and still get the MRP/ MPS planning in APO and  and convert those SNP planned orders into ECC orders in ECC
    Thanks.

    Hi Abhi,
    When you CIF SNP and PPDS planned orders to ECC system there is no diffrenciation between both of them (Because component specific details for the orders are not captured in ECC). So in ECC system you can convert Planned orders to Process or production orders by switching PPDS off in APO.
    In APO system, SNP itself can plan for all the levels (RM,PM,FG,SFG) so no need of doing MRP.So you can switch off PPDS.
    MPS functionality is available in ECC and not in APO system.
    Thanks and regards
    Sravan maturu

  • Need Resource planning tool in ECC 6.0

    Hi
    i need to findout Resource Planning Tool in ECC 6.0,Can anybody help me how to findout RPT tool in ECC6.0.
    Thanks & regards
    Vikram Gopal

    Hello,
    Resource Planning
    Use
    Resource planning is a planning aid. If you only know the quantities of consumed resources (see also: Resources) you can use resource planning to plan activity-dependent or activity-independent primary costs or revenues by quantity. You can carry out detailed planning of a cost element by subdividing the cost element on the basis of the resources. The system valuates the given resource consumption with a price, which you can store separately in the system.
    You can also link resources to a material or to a base planning object. This means that a resource or a base planning object has been entered in the resource master record. For the valuation of resource consumption during planning, the system uses the price of the material, regardless of whether you have defined a price for the resource during pricing (see also: Pricing).
    http://help.sap.com/erp2005_ehp_02/helpdata/en/17/316cc3b43011d19296c8d204c10000/frameset.htm
    Regards,
    Sourabh

  • Budget / Planning Process

    Hi,
    My company would like to use the budget process in SAP to keep track of actual vs budget / Panning.
    Can some one provide me the full configuration setup for the budget / planning process ?
    Like creating budget version or plan version, entering of planned values, any need to create additional accts or used of secondary accts ?
    Thanks.
    Angel.

    Dear,
    If you are using Funds Management then you can have the budgeting funcitonality at very deep level.
    If you are not using FM then use Internal Order functionality to meet your requirement. Do following to get this done...
    1. Create Order type with category 01. (Tcode - KOT2)
    2. Create Budget Profit and insert this into order type created in step1. (Tcode - OKOB)
    3. Define tolerance for an Internal Order type which is located in SPRO>CONTROLLING>INTERNAL ORDER
    4. Create internal order.
    5. Assgn budget to internal order.
    Regards,
    Chintan Joshi

  • Budgeting/Planning Applications

    We may be looking at Budgeting/Planning applications at some point in the future. I am familiar with Hyperion Planning. Are there others that work with Essbase that may be worth looking at?

    Clarity Systems seems to be more flexible than Hyperion Planning. We've been using Planning now for 2 years and are considering transitioning to Clarity Systems. Clarity hooks up to Essbase cubes in the background just as Planning does but offers more features and less limitations than Planning. Hope this is helpful. Cameron

  • Budget Planning for Plant Maintenance

    Explain functions for Budget planning through SAP BW-BPS (SAP Business Information
              Warehouse)

    SAP has the MCB functionlity for this.
    With maintenance cost budgeting (MCB) functionality, SAP offers a product life cycle management cross-application component supplying a solution for planning a maintenance cost budget. A MCB in general is a budget for all costs for maintenance, inspection, and repair of technical assets. In the stricter sense of SAP R/3 software, a MCB is a budget for PM order costs.
    MCB provides the following planning scenarios with pre-configured standard entries:
    - The history-based scenario is history-based and the budget categories are combined in one overall planning scenario. This scenario can create records with budget categories “preventive”, “planned” or “unplanned.”
    - The ad-hoc (hist) scenario
    - The maintenance plan scenario is zero-based and can only create records with budget use “preventive.”
    - The task list scenario is zero-based and can only create records with budget use “planned.”
    - The ad-hoc (plan) scenario is zero-based and can create records with budget categories “planned” or “unplanned.”
    The benefits of an appropriate budgeting tool include:
    - Tool to drive down maintenance costs
    - Better data integrity than spreadsheet-based budgeting
    - Access to your plan data from everywhere with a user-friendly front end (Web interfaces)
    - Ability to reflect changes in near future
    - Flexible and accurate reporting
    - Integration with other enterprise systems
    - Data extracted automatically from back-end system
    - Reduction of the budget preparation time
    - Continuous planning with standardized, automated budget processes
    - Better transparency of the budget planning process
    - Support of planning as a company-wide effort, with a great number of managers and employees contributing
    - Not just a tool but analytical applications
    Regards,
    Paul

  • Wrong production version picked for planned order in ecc after CIF

    Dear experts,
    I am new to apo and was working on Cif of transactional data to ecc after planning run in Apo.
    we have active integration model and all the master data cifed in apo.
    we are cifing ppds ppm which is converted into snp ppm.
    The scenario is:
    We have a product FG100 at Loc1. For this product we have five alternate PPM's in APO.
    When we do SNP planning run, for some planned order it picked alternate 4 or 5 as source of supply. Which is alright.
    The problem is when we see the same planned order in ECC it shows source of supply as alternate 1. i.e. planned order in apo with alternate 4 and planned order in ecc with alternate 1.
    Is this the expected behaviour, or there is some configuration setting for this. We want that it shows the same source of supply in ecc as in SNP planned order.
    Best regards,
    AKS

    Hi Vikas/Nandkumar,
    thanks for the response, in my case the issue is that I have got two production versions in ECC. One production version is used for planning in CTM while the other version should not be considered in APO CTM for planning.
    The productionj version which I am not using for planning, I can manually attach the version in ECC to the planned order and the planned order should get CIFed to APO with the source of supply and resource details.
    Vikas after executing the report also the source of supply is not getting displayed in the planned order.
    Is their a solution by which i can achieve the above results.
    Thanks,
    Sanjog

  • Automated Budget Plan preparation & Consolidaton

    Hi,
    I have a requirement for automated budget plan preparation and its consolidation in Funds Management, the process is :
    1. Preparation and sharing budget templates to cost centers
    2. Gather final approved budget from cost centers by gl wise
    3. Consolidate all the budget
    4. Upload the consolidated budget
    The above steps are to be processed automatically in system.
    I explored the solution from Funds Management, but could not able to reach.
    Please suggest
    Regards
    Sam

    Thanks for the Referral Minghong Ji;-)
    CA Sam,
    If you want the individual cost centers to enter their plans into CO Planning and then copy the plans to FM, as Eli mentioned, there is a tool. The transaction code is FMCYCOPI_CO. I have used the previous version of this tool but not the latest.
    Thanks
    Shyam

  • Stopping Planned orders to ECC

    Hi All,
    I am facing an issue in which the planned orders created in the simulation version are getting transferred to ECC. As per our scenario we dont want to move any Planned orders to ECC. Please advise me the way how can i stop the transfer of orders to ECC.
    Regards,
    Manjit

    Hi Kenneth,
    Thanks for your reply,
    I had already stopped it Transfer of SNP orders to OLTP system. I have selected No Transfer in SNP Tab. But i have not tried selecting No SNP Planned Orders as i thought No Transfer itself means No order should be transfered. Is there any other way to stop orders from the active version.
    Regards,
    Manjit

  • Scenario on Procurement Budget planning, Fund management

    Dear all,
    Can any one put a light on this.
    We have a scenario on " Procurement Budget planning " Fund management. We need to plan annual spend plan with respect to procurement.
    Could any body suggest what settings need to be carried out with respect to MM module ? what are the responsiblities of MM ?
    Does it carried by MM or FI ?
    Any related material related to MM?
    please suggest your valuable inputs.
    Best Regards
    Javeed

    Hi,
    Is your question technical or functional; that is are you asking who should be responsible for the content of the budget planning or how it's technically to do it in SAP?
    If the first is correct, then it's for your budget officer to clarify it. There is nothing to be done by MM consultant, as MM is automatically integrated within FM framework for budgetary aspects. It's up to your FM consultant to set up the budget and take of relevant derivation rules.
    Regards,
    Eli

  • COPA vs IP for budget planning

    hi gurus...
    i m involved in a bi project about budget planning, and all the time i got the question from the users: why do I use BI instead of COPA for budget planning?
    I know BI but dont know copa, so what r the advantages of IP over COPA?
    regards
    joker

    I've not got any reply on post yet, I'm wondering have i Posted  a question in wrong sections, If so please let me know correct group in which i can post this question.

  • Budgeting/Planning on group of Projects

    Hi,
    IN SAP PS we can not budget /Plan on group of Projects...
    Is there any work around through which we can acheive this?
    Many thanks

    Hi Ahmed,
    i think ,what you are suggesting is whatever plan cost i have on project level that we can transfer and make it budget for the projects but that is not something which i required
    basically the requirement is like that we need to control the budget on group of project not on particular project.
    Say i have 5 project P1 to P5, Can we budget for P2-P4 combinely  suppose 100GBP.so if 100 GBP is booked for P2. i should not be able to book any cost on P4.
    I know that is something which SAP PS does not provide, but still if you can suggest some work around that will be very helpful
    Many thanks

  • Budgeting/Planning/Forecasting products

    I am currently researching new internet based applications for
    budgeting/planning/forecasting (rolling forecast). I am looking
    at a product from Adaytum called eplanning. What Oracle
    product(s) would be equivalent in functionalities and
    capabilities to eplanning from Adaytum?
    Is eplanning from Adaytum better than Oracle products for
    Budgeting? Planning? Forecasting?
    Where would I find an article that compare/rate them?
    Thanks

    Clarity Systems seems to be more flexible than Hyperion Planning. We've been using Planning now for 2 years and are considering transitioning to Clarity Systems. Clarity hooks up to Essbase cubes in the background just as Planning does but offers more features and less limitations than Planning. Hope this is helpful. Cameron

  • Budget custom report in ECC 6 Upgrade

    hi
    my company has just upgraded to ecc 6 on monday.
    i have ran a budget report (Custom) and the actual amounts column is not being updated, everything else is.
    can anyone help me please.

    Hi,
    Could you please give me the phase in which you encounter the error and what doyou mean by after completing SPDD and After SAP Downtime please elobrate.
    Regards,
    Iqbal

Maybe you are looking for

  • Two apple ID's, one has purchased additional storage

    I have two apple ID's--one on my iPhone and one on my iPad. I only want ONE. I realize they can't be combined. I have bought storage on my iPad that NOTHING has been synced to, it needs to be purchased on my iPhone instead. I want to have just ONE ap

  • SAP-R/3- In which table, numeric values stored in  equipment characteristis

    SAP-R/3- In which table, numeric values stored in  equipment characteristis are captured. In AUSP table Char values in equipment characteristics are captured against object number.But this table does not cappture numeric characteristics. Are these nu

  • Can I stream ''TV Catchup to my tv via Apple TV from my ipad air ?

    As above can i stream ''TV Catchup''  to my tv via airplay from my ipad using Apple TV ?  Cheers

  • Display problem in BEx Query

    Hi All, i am having a strange problem when i execute a query in the BEx. i am having a Master data infoobject C_PARTNR2  and it is having a compounding Char. C_ATTRIB.  Also it has some attributes like 0STREET60 and  C_LINKO and several other charact

  • Goods movement button not visible in CO11N

    Hi, i am not able to see goods movement button CO11N transaction as shown below in one if my IDES server.... what settings we need to do for this so that goods movement button is visible like below... Thanks Kumar