Can't connect to my company's wireless network after 10.6

I was connected when I upgraded, but as soon as it restarted I can't re-connect, or I do get connected and it says "No IP Address".
The network is a WPA network. I've removed it from the list of saved networks, deleted the com.apple.airport pref file and rebooted but it is not picking up the settings for the network correctly. When I change them to what I think are correct it still doesn't work.
Also, while in the Network pref pane It added the network as a 802.1x network, but when I click connect it just hangs.
A couple times it has connected but about 10 sec later an "!" appears over the indicator and then it keeps disconnecting/reconnecting.
Any ideas?

Yup, I am having the same problem, I just assume go back to regular Leapord but that means a clean install and I don't really care to do that. The solutions seem rediculous, just wait and meaybe it will work after an hour? Really? Or restart my router, tried that and nothing. Changed the security to nothing and I still couldn't connect. This is redicuolous, Thanks Apple for your attempts to be like Microsoft and put out a crap product. To me, this is unacceptable. Beta testing should have identified the problem and they should have fixed it before release. Now, apparently, there are a bunch of users who have airport issues. If anyone has a real solution, please provide it, otherwise, Apple needs to get their, you-know-what together and fix the problem asap.

Similar Messages

I can't make my iphone 4 forget the hpsetup network which keeps showing up at work. My phone won't automatically connect to my company's wireless network.

I can't make my iphone 4 forget the hpsetup network which keeps showing up at work. My phone won't automatically connect to my company's wireless network. I have to reselect it everytime I come to work.

Settings/General/Reset - Reset network settings will "forget" all WiFi networks so you can select them again.
If the problem with your company network is not solved by doing this, are there multiple sites that have the same network name for the company network? Or is it the default network name for the router type (e.g., DLINK, LINKSYS, etc)? If so, this is what is causing the problem and there is no solution other than convincing IT that it is a bad idea to have duplicate network names.

Can I connect a Macbook to a wireless network for PCs?

I would like to purchase a Macbook but I would like to figure out the extra costs before buying. I currently have a Dell Inspiron 600m notebook that connects to the linksys network in our house, can I connect a Macbook to the same network or is there another package I need to buy?

The other users may know more about this than I and dispute with me, but I can tell you from personal experience that sometimes there are problems. At this very moment, for example, I am at a buddy's house who has a wireless router hooked to his pc and my apple FIRST displayed one internet page and then flaked out on me. SECOND showed an airport signal but could not connect to any sites. THIRD showed no airport signal at all.
The solution is to plug directly to the router with an ethernet cable and it always works.
The other solution is to unplug the router for 30 seconds to reset it everytime you switch between a pc and a mac. The cable company gave me this handy solution which they claim is a constant necessity. BUT I have found it is in fact rarely needed at home where both pc and macs are running. But still sometimes I have to do it.
So if there is some pattern to all of this I cannot find it. But there is no "extra" hardware required, just some occasional software failures.

Can't Connect Photosmart 7510 Printer to Wireless Network

This printer isn't new, but it's new for me (my mother gave it to me). However, I'm trying to set it up, and I can't get it to connect to a wireless network. When I go into the Wireless Network Setup on the printer, no networks are listed (even though several should be listed, mainly our home network). I tried entering the network information (name & password) manually, and it still didn't work. I've downloaded drivers and all, but I can't complete anything because while the printer is powered on, it's offline. I don't know if the drivers just don't work because I upgraded to Yosemite within the past few weeks (and the drivers are for the OS prior to that one), or what. I can't even begin printing because I'm dealing with this nonsense...

Did everything you said to do, and still had the same issue. The Wireless Network Test results say the following: WirelessWireless Working - FAILSignal Quality - Not Run ConnectivityConnected - Not RunDisconnect count total - 0Disconnect count (last hour) - 0Disconnect count (last 24 hours) - 0 NetworkNetwork Name (SSID) Found - Not RunOther networks detected matching your network name (SSID) - NoWireless Networks Detected - 0 SettingsPrinter Settings Consistent with Wireless Router Settings - Not RunNo Filtering - Not RunChannel - Not RunSecurity - Not Run

Can i connect the printer to a wireless network and a usb computer conneconnection at the same time

Can I connect my Officejet Pro 8600 by Usb and wireless at the same time, I have a very slow Network at this time.

Hello gilldenc
To answer you question yes. You can have one computer attached via USB and to a wireless router at the same time. What router are you using? Is it your internet connection that is slow? Usually your internal home network is much faster than your internet speed.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Can't Connect OfficeJet 7410 to new wireless network - used to work on old one

Hi, I'm on a Mac OS. I just upgraded my wireless network to use an airport extreme. I have a verizon fios router - same as I had when it used to connect. The only change was adding the airport extreme. Now, the officejet 7410 all-in-one will not connect to the wireless connect. It SEES the name of the network, and asks me for a WEP Key, which it didn't used to do. It used to ask me for the network password. I found the WEP key on the router and it acts like it is trying to connect but takes a long time and then gives me an error. One time it never gave me an error and seemed like it had worked, but was not connected. It just gave up.
My configuration page indicates offline with no active connection and wireless status disconnected.
I restarted everything with no change. I don't know why it would be asking me for a WEP key this time and then not accept it but that was the first indication that something was different when it didn't ask me for the network password.
Also, as a separate issue but related. In trying to fix this, I deleted my drivers to reinstall and see if I started over that it would work. That created another problem in that now it seems that HP no longer supports a driver for this printer. Is that even possible? It's not that old. It says it does not exist on the software update. Please help!

Hi YSJA,
I'm sorry to hear you've had problems accessing your Officejet 7410 since adding the AirPort Extreme to your home network.
I have included a link to HP's Wireless Printing Center troubleshooting section. It has section, "Was anything changed or updated on your router recently?" that has detailed steps to help you resolve the issue.
Wireless Printing Center Troubleshooting
http://www.hp.com/global/us/en/wireless/troubleshooting.html
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

IOS 5 can't connect to WPA/WPA2 Enterprise Wireless Network

After upgrading multiple iPhone 4 (CDMA versions) to IOS 5.0, I have not been able to get them to connect to our WPA/WPA2 Enterprise wirless network. We use a Cisco Wireless LAN Controller. The wireless network is capable of doing WPA or WPA2 Enterprise with PEAP. These phones all connected to this network fine before the upgrade.
When connecteding to the network, it prompts me for the username and password and when I tap join it sits for about 10-15 seconds then says "Unable to join the network" with a Dismiss button.
It connects to non-Enterprise networks just fine. I have tested it on WPA Personal and WPA2 Personal networks and it has worked on several without issue.
I have tried "forget this network" with no success.
Is anyone else having this problem? I know of at least three Verizon iPhone 4's that have this exact same problem. I haven't seen one working with this configuration yet.

I have the same problem:
Cisco WLC's -> WPA2 Enterprise AES + EAP-PEAP 802.1x with CCKM
Pre 5.0 - all worked fine
Post 5.0 - it tries to connect and after few moments i get error - couldn't connect.
Info from controller:
10/17/2011 12:16:37 CEST           INFO           172.16.16.X           Sending EAP request to client from radius server. 6.f. ..l
10/17/2011 12:16:38 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:39 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           Authentication failed for client as EAP ID request from AP reached maxmium retransmissions. 5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           De-authentication sent to client. 5.oP ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           EAPOL-key is invalid, scheduling client for deletion. 5.yp ..l
On the Radius server i don't see any activity regarding this device.
I had this network configured on my iPhone - after upgrade and restore it remembered it. Every time i was in vicinity of my Enterprise WLAN it tried to connect - resulting int express battery drain - 6-7 hrs and battery was empty from 100%

WRT110 Can't connect MAC and PC to wireless network at the same time.

I installed a WRT110 router on my son-in-law's MAC sometime back and at the time configured it to have the MAC connected via Ethernet. My PC laptop worked fine with it in the wireless mode. Recently we changed the MAC to wireless newtworking and removed the Ehthernet connection. Now if the MAC connects to the wireless network first and then I attempt to connect with my PC laptop the PC cannot find the network and the MAC loses connection. If I shut my PC down the MAC will not find the network until it is put to sleep and reawakened. If the MAC is put to sleep my PC wil immediately find the network. If I first connect my PC and then awaken the MAC both work fine. I've checked all of the router's setup settings and they seem to be OK. I am not MAC savvy and my son-in-law is a neophyte at computers so we are really helpless when something doesn't work. Help will be appreciated.

I tried this setup change after reading another similar post. It didn't help. One thing I had wrong in the first post is that neither computer will connect to the wireless net after we experience the wireless failures until both are turned off, at least that is what happened after making the suggested changes. Is this a WRT110 issue? Seems there are quite a few posts similar to mine.
Bo2

Can't connect Airport Express to existing wireless network!

I just got my new A Express. i try to wirelessly join an my existing network but when it restarts it doesn't see the device. It's i'm trying to set it up so that I can use it as a wireless printer connection for my two macbooks, but all i end up with is the flashing amber light. I've tried a hard reset and that's clearly not solving the problem.
i'd welcome some help as well.

for some reason i had a problem with my airport in my laptop and it couldnt find networks that are hidden.. so that might be the problem the encryption.

Can't Connect AirPort Express to existing WPA network

I just bought an AirPort Express and I can't connect it to my existing Wireless network where I use WPA based security.
I've both tried to use the Configuration guide and done it manually with the Admin tool but it just will not connect to my Wireless network.
Less of changing form WPA-PSk to WEP128 I think I have tried "everything".
Any ideas?

Can you changed your router to use WPA:TKIP as opposed to WPA:AES?
When I changed my router to WPA:TKIP, my airport express connected, but with AES it doesn't!
This is not good, since according to Wikipedia, AES is superior and considered part of WPA2, which Apple claim they support (and yes I am using firmware V6.3)!
Hope this helps!

WRT110 can't connect message & dsl company doesn't see router :(

WRT 110 Cannot get on internet wirelessly -wireless light is on-- on computer & DLS company can't see my wireless computer router ,I get message cannot connect and a red x . I'm on with ethrnet now but need to get router going again has worked fine for 6 months. In bed with disability and have to have wireless. Thanks

I think you need to check and change the Wireless Settings on your router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Wireless MAC Filter
If you have Enable the Wireless MAC Filter on your Router, you need to Disable it and click on Save Settings.
Click on Advanced Wireless Settings
Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Once you are done with all the settings on your Router, on your computer click on Start - Control Panel - Network Connections - Right click on your Wireless Network Connections and click on Properties and then click on "Wireless Network" tab and under Preferred Networks you need to remove all the Network Names from the List and click OK...
Now you can try to connect to your Wireless Network.

How can I connect my iPad to my wireless Hp Officejet Pro 8500 A909g ?

How can I connect my iPad to my wireless Hp Officejet 8500 A909g ?

Are you trying to connect the iPad directly to the HP or using your wifi network?
HP published this page that may help:
http://www8.hp.com/us/en/ads/mobility/overview.html?jumpid=va_r11400_eprint
A909 does not show as an AirPrint capable printer:
http://support.hp.com/us-en/document/c02623193
About AirPrint - Apple Support
You may wish to search the AppStore for an app that could help you.

HELP! Can't connect on 2 or more wireless connection

I have WRT110 Linksys wireless router. I also have the latest firmware. fw 1.0.04. I have no problems connecting wired connections(2 PCs) and 1 wireless connection. However, when i tried connecting 2 or more wireless connections(3 laptops). All computers gets disconnected. I need to turn off the router again and my computers to get connected but only 2 PCs and 1 wireless laptop... Any help please! I already talked to tech support and no help! We tried to power cycle, reset for 30 secs, remove adapter, cables, etc. and didn't help! Same results! Can't connect on 2 or more wireless connections. We edited the basic wireless setting to WEP/WPA personal, band, channels, still no luck too! Im getting frustrated with this router. PLEASE HELP! I have Time Warner Road Runner cable internet. Thanks in advance!
Message Edited by rhenzhen on 10-02-2008 05:18 AM

Try these settings on Advanced Wireless
settings>>Change the Beacon Interval to 75 >>Change the Fragmentation
Threshold to 2304 Change the RTS Threshold to 2304. and Upload the same firmware on the router once again.

How can i connect iphone 5 with izon wireless camera?

Hi
How can i connect Iphone 5 with izon wireless camera.I have tryed everything.I try to restart this camera,but iphone can not find this izon.
What is wrong??????????

I would check if they have some info here
http://steminnovation.com/support
and then I would test it with other phones or a computer to verify that it's not broken

Can't connect to 802.1x wireless network after upgrading

I have a year-old iPod Touch that I recently upgraded to iOS 6. I have no problems connecting to my home network, but since upgrading, I haven't been able to connect to the 802.1x wireless network at my job. When I try to connect, I get a spinning circle, but no actual connection. If I do nothing, it never times out, just keeps spinning.
I've tried resetting the network settings. I am able to login and accept the certificate, but I never get an IP address. I have access to the logs, so I checked and I'm authenticating successfully. I had no problems whatsoever prior to upgrading to 6.01, and I have no trouble accessing the network with other devices, including my MacBook Pro and MacBook Air.

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Can't connect to my company's wireless network after 10.6

Similar Messages

Maybe you are looking for