Can't connect to sshd on new install

Background: I just did a fresh install of Solaris 10 downloaded straight from sun.com. It's a sol10 sparc distro on an older e420r (UltraSPARC II's).
The install went fine. In fact, it was easier to get everything up and running installing from scratch then the 2 servers we ordered with Sol10 preinstalled.
I have one problem though. I cannot SSH into the machine. I cannot even SSH into the machine from itself (ssh localhost). No matter where I'm coming from, I get:
Connection closed by ###.###.###.###I've checked the service, and it's running fine. I've tried restarting it numerous times, and nothing. Here's the service info:
# svcs -l ssh
fmri         svc:/network/ssh:default
name         SSH server
enabled      true
state        online
next_state   none
state_time   Thu Mar 02 15:23:41 2006
logfile      /var/svc/log/network-ssh:default.log
restarter    svc:/system/svc/restarter:default
contract_id 155
dependency   require_all/none svc:/system/filesystem/local (online)
dependency   optional_all/none svc:/system/filesystem/autofs (online)
dependency   require_all/none svc:/network/loopback (online)
dependency   require_all/none svc:/network/physical (online)
dependency   require_all/none svc:/system/cryptosvc (online)
dependency   require_all/none svc:/system/utmp (online)
dependency   require_all/restart file://localhost/etc/ssh/sshd_config (online)I tried it from a remote machine while running Ethereal and I see an SSH connection being made (I can see sshd reply back with "SSH-2.0-Sun_SSH_1.1"), so the port isn't being block by the firewall.
Am I missing something? Is there something like hosts.deny/host.allow (there are no hosts.allow/deny in /etc/) that I don't know about (I'm pretty green with Solaris)?

I see your error message but I'm not sure where
that's comming from. Is it comming from ssh the
client? Or is this a server error from some debug
log?
If after you try all the other tips and it is still
not working, then disable sshd on the problem host.
Manually run ssh daemon in debug mode in the
foreground.
Then on another host
ssh -v -v -v toproblemhost
Then post the full screen outputs, from both the
client and the daemon.
Cheers,
~~saI'm not sure how to run sshd in debug mode. I looked at the manifest for the service, and the program which runs the start/stop for sshd seems to only have a start and stop option. Anyway, here's the output from the client:
Sun_SSH_1.1, SSH protocols 1.5/2.0, OpenSSL 0x0090704f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to 66.255.56.166 [66.255.56.166] port 22.
debug1: Connection established.
debug1: identity file /.ssh/identity type -1
debug1: identity file /.ssh/id_rsa type -1
debug1: identity file /.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version Sun_SSH_1.1
debug1: no match: Sun_SSH_1.1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-Sun_SSH_1.1
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: en-US
debug2: kex_parse_kexinit: en-US
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible
Unknown code 0
debug1: SSH2_MSG_KEXINIT sent
debug3: kex_reset_dispatch -- should we dispatch_set(KEXINIT) here? 0 && !0
Connection closed by 66.255.56.166
debug1: Calling cleanup 0x34204(0x0)

Similar Messages

Can't Connect on localhost on new install of CM 13

Just installed CM 13 to try. Install went fine but when i run, it can't connect to localhost. I have tried replacing localhost with the computer name. Thinking it could be the port but i'm not sure how to change. Also thought it could be firewall. I'm using windows firewall. Computer is XP.
thanks

Open task manager and bring up the processes tab.
Look for 'ExpService.exe'
Is the memory usage around 350-380k?
If not, I would check the log files (expconsole.log or server.log) for any port conflict messages.
To rule out the firewall, just turn it off and restart the CM service.

How can I connect a MacBook Air (new) to a Sony Bravia TV

How can I connect a MacBook Air (new) to a Sony Bravia TV

This Mini DisplayPort to HDMI adapter will let you see and hear your Mac on your HDTV - http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5311&seq=1&format=2

TS1474 I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer. How do I resolve that so I can literally connect it to my new computer and transfer all my mus

I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer. How do I resolve that so I can literally connect it to my new computer and transfer all my music? Any help is much appreciated.

I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer.
It doesn't quite work that way. Transfer your music from the old computer to the new one. Then, sync the iPod.
iTunes: How to move your music from one computer to another:
http://support.apple.com/kb/HT4527

Can't connect to iTunes after new iOS download

Can't connect to iTunes after new iOS download

Hi,
how exactly did you do that?
I have the same problem, I tried everything (including upgrading my macbook pro to os x yosemite),
but my iPhone 4S still won´t connect.
Care to share how you resolved it?

Can't connect to Time Machine after installing Mavericks.

Both green lights on in Airport Utility but can't connect - says check IP address or contact administrator (I am the administrator), have done a hard rest and shut down but still unable to connect. Have shut down the Mac - restarted and still back up failed. Green light on the Time Maching (not flashing), green light on internet, internet via Wifi and working fine - good signal - no interruptions or drop-outs, just can't get the computer to connect to the time machine - even thought it appears to be OK in Aprpirt Utility? I'm stuck.
Can anyone help me?

I am having a similar problem - when I updated to Mavericks the install seemed to go OK until the last minute, then it literally hung for hours. I decided to re-boot the computer. From there, it seemed like the Mavericks install was a "clean" install, and it was like setting up a brand new computer. All of my programs were kept, but it lost all of my files from finder, as well as all my e-mails, etc. When I tried to backup from Time Machine, none of the buttons seem to work, and I can't get it to work. Also, before the install my 500 GB Time Machine drive was showing almost full, now it shows about 300 MB full. I also tried to migrate the files from the Time Machine drive to the iMac, still with no luck.
Good thing I had migrated my iTunes and photos to other external drives, and I was able get those back. Losing 500 MB of photos probably would have given me a heart attack.
Any suggestions?
Arrrgh!

After updating to 10.8.1 i can not connect to wifi no hardware installed , it says

When I installed the update to 10.8.1 there comes a message that there was a problem by installing.
Now i can not connect to a wifi network, when i click on the wifi at the bottom
No hardware is installed
Why is there no hardware installed?
Under 10.7 all was fine

I have MacBook unibody late 2008 with OS X Mountain Lion on board. Wifi stopped working suddenly and I spent about four terrible hours to solve a problem.
Actually, none of mentioned and googled advices helped me out to solve this issue with 'WiFi: No Hardware installed'.
Except one thing: using the wifi kext from the Snow Leopard. You may use utility and kext from here: http://rys.sommefeldt.com/2011/09/04/osx-lion-wifi.html
I hope, this can help.

Can't Connect Via Ethernet on new MacBook Pro

Hello,
I'm running into a frustrating problem and hoping someone can help.
I have a new MacBook Pro that won't connect via Ethernet. My old computer (Powerbook G4) with the same settings works flawlessly.
Details: under Network Settings I have Automatic/Using DHCP. When I click on Assist Me>Diagnostics, I get green lights all the way down (Built-In Ethernet, Network Settings, ISP, Internet, Server). The Diagnostics tool therefore proudly announces that my Internet connection is working correctly.
When I open Safari, however, it won't open any page. Using Ping I also get no responses.
When I plug the exact same ethernet cable into my Powerbook G4, everything works flawlessly. The only difference is that the IP address ends in .25 instead of .30 (I assume that's from the router assigning different IP addresses to the two computers.)
On another forum i read about someone having a problem with a long/lossy ethernet cable, but I just took my computer to the router and tried with a 2-foot ethernet cable. Same situation.
Help!
Thanks

i rebooted the firewall and it worked.

Older iphone can't connect to store, but newer one can

I cannot connect to the itunes store with my older iphone, but I can with my new one (both from in my house and on the same wireless network

Morning kecarlini,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario

Can't sync from server on new install

so i probably should have read more into this firefox sync thing....instead of trying to save a bookmark file anywhere when migrating to a fresh new install of linux, i just figured i would set up this sync account (had never used it before today), let it upload to the mozilla servers, and assume i could just load it all back up on my new install.
well here i am, now realizing that i needed a recovery key before i deleted my old install/partition.
when i try to to get a recovery key after entering my login info, it says that any previous data on the server will be erased if i am to get a new recovery key...am i hooped for trying to get all my bookmarks & logins/passwords that i thought i had securely added to the mozilla server earlier today?

The Recovery Key is used to encrypt your data as it is uploaded to the Sync server, and to decrypt your data as it is downloaded onto your devices. Without that "key" your data is useless.
The new version of Sync which is being developed for Firefox 29 does away with the Recovery Key.

Acrobat 11 can't find internet to validate new install. All other apps in my Win 8.1 x64 pc work perfectly. Where is the trouble?

The trouble started with Acrobat 8 Pro. It indicated needing an e-license extension and would not connect to the internet. So I uninstalled and purchased Acrobat 11. Now it also will not find the Internet to validate the install. Why?
In the process of this question I called Adobe Support and they instructed me to look into the Windows\system 32\drivers\etc folder. There is a file called 'hosts' that holds the key to the error. You must change the attributes of this file from Read Only and uncheck that box, close the file attributes dialog. Now you can open the file with Notepad and you should see a string of numbers followed with a comment about Adobe.com. After each number string and before the words that follow ADD the # symbol followed by a space. Save the file. It should overwrite the original. You might want to open the file once again just to be sure that the changes you made are in place. Now you can start Acrobat and the licensing/activation process will continue as it should. I have to guess that this whole problem stems from the Windows upgrade from 8 to 8.1. I've had many issues with other programs giving me mixed to frustrating results. I've found a work around for all of them so far but what a pain Microsoft is this time.
The Adobe Support people were superb in their help. Very patient and able to direct me to the fix. It helps that I have a bit of computer knowledge so I was able to discover the attribute problem when I could not initially write a new file after my changes.
Once again Adobe proves to be mighty in their product support.
Rick Nathan

Confirmed. I even tried this trick, but this did not work for me
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/VeriFace-with-XP-Domain-Accounts-Upside-dow...

IPod can't connect with iTunes-keep getting install 64 bit iTune message

When I connect my iPod Touch to the computer and try to sync with iTunes, I keep getting the message that I have to uninstall the 32 bit iTunes and install the 64 bit iTunes. We've already done this and it won't recognize either the iPod or the iPad. HELP, please!!!

honestly on a Windows I do not know how, there are programs that you can download that will tell you, and there are unix scripts that can tell you. to find out how, you might want to talk to somebody who owns a windows and is proficient in using it.

OBIEE11 Can not connect to VM server after install sucessefully

Hi All:
Another question about OBIEE 11. For now, I have installed OBIEE11 sucessefully at customer's server (which is a VM) and it run normally.
But I can't access it via my own computer using the same HTTP address. Is there any possibility for this issue?
Thanks very much for your help.
Sunny

Have to checked to make sure you can connect to the servers IP (ping) and also if there is no firewall blocking the ports?

Can 't connect old iMac to new Mac Mini

I'm trying to connect an older iMac (450MHz, cherry red OS 9.2.1) to a new Mac Mini (OS X 10.4.3).
I don't have a Frewire cable, so I'm trying to do it with an ethernet router. I seem to be doing it incorrectly. File Sharing is turned on for the iMac. I have set TCP/IP to configure with DHCP, but when I try doing Connect to Server from the Mini, it can't see the iMac. What could be wrong?
After I tried DCHP, I tried configuring manually. I input the router's IP address, the correct subnet mask, and an invented IP for the iMac, making it one integer larger than the Mini. Still no luck.
Now what?

I don't think you even need a router for those Macs… someone please confirm or correct me, and I think the Mini has an autosensing socket that will let you talk directly to another ethernet device, in this case the iMac…
That aside, when you're not using DHCP please specify exactly what you've put in IP Address, Subnet Mask, Router, DNS Servers and Search Domains on both Macs, and do they both have AppleTalk on?
"the router's IP address, the correct subnet mask, and an invented IP for the iMac, making it one integer larger than the Mini…" is only two IP addresses and this needs one each for the Macs and a third for the router… The router probably has a factory default of either 10.0.0.2 or 192.168.1.2, yes? In that case the Macs want to be x.x.x.3 and x.x.x.4
Then, did you literally mean "Connect to Server from the Mini, it can't see the iMac…" It won't, unless you either enter the iMac's Server Address or manually Browse…

Can't connect to/sync using new Server setup

Hi all,
I have set up a new Server and cannot seem to use it to sync, which is its purpose -- requests time out. I also cannot "Connect to server" from the Mac it resides on (suggested troubleshooting step someone gave me). Here's the background:
I'm a brand-new didn't-wannabe server administrator with OK but rather rusty technical knowledge.
I've set up Server in order to provide a local (non-Cloud-based) WebDAV sync server for OmniFocus as Apple in Yosemite (as I understand) removed the ability of 3rd party developers to use the OS's built-in WebDAV server to sync. So Apple stopped supporting the developer, the developer stopped supporting me, and here I am, doing the best I can, but I'm in over my head at the moment.
Here's my system:
MBA, mid-2011 / 4GB / 250 GB
HD with only 6GB free but I've gotten rid of the alert
Mac OS X 10.10.2
OS X Server 4.0.3
OmniFocus for Mac 1.10.6
iOS 6.1.6
OmniFocus for iPhone 1.15.1
I changed defaults for both the long and the short names of the server, edited them in the server overview window (the changed short name didn't take!). In the Settings tab of same, nothing is checked, which I wonder about. In Access, at the moment out of desperation I'm allowing all users and all networks, and still no dice.
In File Sharing, I turned file sharing on, set up my sync folder and shared it (again, out of desperation) with all users and all networks.
In the log, besides a lot of (to my eyes) gobbledygook, I see something like the following lines which seem significant, every time I try to sync from OmniFocus, either on the Mac itself or on my iPhone:
Apr 6 12:44:35 [servername].local OmniFocus[1642]: SecOSStatusWith error:[-34018] The operation couldn\u2019t be completed. (OSStatus error -34018 - Remote error : The operation couldn\u201a\304\364t be completed. (OSStatus error -34018 - client has neither application-identifier nor keychain-access-groups entitlements))
I can't find any documentation on the error codes.
Omni Group staff advised me to try connecting right from my Mac to the server also on the same Mac through Finder > Go > Connect to Server. If entering the server address (https://[servername].local), it times out in about 10 minutes in the same way OmniFocus does. In the same dialog, if I choose browse instead, I find that within the Server folder are aliases to both [servername] and [servername.local], and they both behave as if they were opening the very top level of my HD.
I'm at a loss for what to try next now, so would appreciate any sage advice.
Thanks!

I'm also wondering, from somewhat similar problems I've read, if permanent IP addresses might make a difference?
At the moment our household router gets its IP via DHCP from our telco provider, and I believe it in turn provides DHCP IPs to the devices on our home network. As this is working fine at the moment and I remember the old "if it ain't broke" adage, I don't intend to try changing this setup unless someone with some experience tells me I ought to. But I thought I'd throw it out there.
All "Connect to Server" and sync attempts are still timing out and this is a work-critical application I need to get running, so any info that could point me in the right direction is appreciated. Even if it's some piece of documentation I need to read. Thanks.

Can't connect to sshd on new install

Similar Messages

Maybe you are looking for