Can't import javafx projext with NB 6.7.1

In a javafx project importing and other javafx project as a librairy doesn't work, we cannot import anything from the lib project.
Any suggestion?

I've had the same problem since 6.5 and javafx 1.1.......
really bizarre...(I was trying to use the jfxtras library).
The only solution I came up with was to add the source to jfxtras to my project and build it that way.
I can't believe this issue hasn't come up more often?

Similar Messages

I am having problems importing some CDs into iTunes on a laptop with Windows 8. Most CDs import without problem. The ones I can't import can be imported into iTunes with Windows 7. Does anybody know why this problem is occurring?

I am having problems importing some CDs into iTunes on a laptop with Windows 8. Most CDs import without problem. The ones I can't import can be imported into iTunes with Windows 7. Does anybody know why this problem is occurring?

First-off, this seems to be a general problem with 10.4 (across all the operating systems of which I am aware). Unfortunately, I cannot provide a permanent solution but, if you need a quick fix, this will (hopefully) work for you.
For some inexplicable reason, iTunes no longer recognises standard Windows paths. For example:
Y:\Music\Buddy Holly\Buddy Holly - Rave On.mp3
The end result is that it will import a playlist with no content.
It will, however, recognise the equivalent Apple paths which look like this:
file://localhost/Y:/Buddy Holly/Buddy Holly - Rave On.mp3
It is possible to convert your existing playlists using a few basic replace commands in something like Notepad. In my case, I made some code changes in my music manager and now generate two sets of playslists (one standard and one to accommodate iTunes).
Forgive me foir stating the obvious but please remember to make sure that the disk / path containing your music is accessible when doing the import otherwise you will probably get a blank result. Note that you can do a bulk import by selecting all the (revised) playlists and dragging them onto the iTunes sidebar.
I am sorry that this is not a "clean" solution but it will work if you are in a bind. The only alternative of which I am aware is to wait for Apple to fix the problem.

Premiere CS5 import avi clips without sound. How can I import avi clips with sound without convert?

Dear Adobe Forum,
I have the following problem, please help:
I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
Thank you in advance
Leonardo

Now I show you details of 2 files:
the first video clip which you can import with sound (works):
Video:
1280 x 720
data rate: 4259 kBit/s
total bitrate: 4387 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 63.5 MiB
Duration                         : 2mn 1s
Overall bit rate                 : 4 388 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 1s
Bit rate mode                    : Variable
Bit rate                         : 4 248 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 61.4 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 1s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 1.85 MiB (3%)
Alignment                        : Aligned on interleaves
Interleave, duration             : 21 ms (0.64 video frame)
the second video clip which you can import without sound (doesn't work with sound):
Video:
1280 x 720
data rate: 4278 kBit/s
total bitrate: 4406 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 69.3 MiB
Duration                         : 2mn 11s
Overall bit rate                 : 4 407 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 11s
Bit rate mode                    : Variable
Bit rate                         : 4 267 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 67.1 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 11s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 2.01 MiB (3%)
Alignment                        : Split accross interleaves
Interleave, duration             : 21 ms (0.64 video frame)
Consequently, as you can see, they have both nearly the same information
Both video clips have the following audio codec:
AAC
In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work.

Iphoto can't import .CR2 shot with manual lenses on intel imac

I'm shooting with a Peleng 8mm on my Canon REBEL Xt, it is a manual lens and my problem is that all the pictures shot with regular EF lenses can be imported in iPhoto, but the ones shot with the Peleng freeze the import process. I got this problem on 2 different intel iMacs, never on the PPC ones. and only with CR2 (raw) pics. JPEGs are imported, whatever the lens I shot with.
My idea is that manual lenses do not feed information to the camera. (regular EF lenses inform the camera of their aperture and approx. focus distance). Consequently, the EXIF in the CR2 file has no values for the aperture and focus distance. I think the problem comes from that, but I was wondering if nobody knows a workaround. I did file bug reports, twice.
if someone want to give it a try :
http://homepage.mac.com/karimc/iphoto_bugreport.zip
CAUTION: when you try to import the above file, iphoto hangs, you have to force-quit it and delete the contents of the "Import" folder in the iPhoto Library. Only for the strong.

Try converting the files to DNG and import that format. It should work.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Can't import AppleWorks spreadsheet with Japanese

I can't import an AppleWorks spreadsheet with Japanese writing into Numbers. The fonts are all just like this.
Å@Å@â∫ãLÇÃÇ∆Ç®ÇËå©êœÇËÇ¢ÇΩÇµÇ‹Ç∑ÅB
In AppleWorks, the fonts are fine.

How do I get AppleWorks to export to TAB delimited?
Save As… text in the File Format drop-down menu. You will need to add the .txt extension to the file name. AppleWorks won't do it for you & Numbers may not recognize the file as one it can open without the extension.

Can we import to imovie with usb connection rather than firewire??

Dear Friends,
I am considering purchasing a new movie camera JVC EVERIO GZ-MG50E - PAL system.
Unfortunately it has only a usb connection and not a firewire one.
I have been importing until now into imovie with firewire.
Will I be able to import to imovie with usb?
Will this require special software?
Hope you can help.
Thank you.

Hi Robert:
Consider not purchasing that camera for imovie use. You will need to convert the MPEG files to DV which imovie uses...kind of a pain actually.
http://www.danslagle.com/mac/iMovie/tips_tricks/6018.shtml
Sue

OWB Can't Import Existing Package with Collection Data Type as Arguments

I created a package and compiled it successfully as the follows:
+++++++++++++++++++++++++++++
CREATE OR REPLACE PACKAGE PACKAGE_TEST AS
TYPE Num_LIST IS TABLE of NUMBER INDEX BY BINARY_INTEGER;
FUNCTION TEST_FUNCTION1 ( arg1 NUMBER, arg2 NUMBER) RETURN NUMBER;
FUNCTION TEST_FUNCTION2 ( args NUM_LIST) RETURN NUMBER;
END PACKAGE_TEST;
CREATE OR REPLACE PACKAGE BODY PACKAGE_TEST AS
FUNCTION TEST_FUNCTION1 ( arg1 NUMBER, arg2 NUMBER) RETURN NUMBER IS
ln_sum NUMBER;
BEGIN
ln_sum := arg1 + arg2;
     RETURN ln_sum;
EXCEPTION
WHEN OTHERS THEN
RETURN -10000;
END TEST_FUNCTION1;
FUNCTION TEST_FUNCTION2 ( args NUM_LIST) RETURN NUMBER IS
     ln_sum NUMBER;
BEGIN
ln_sum :=0;
     FOR i IN 1.. args.COUNT LOOP
     ln_sum := ln_sum + args( i );
     END LOOP;
     RETURN ln_sum;
EXCEPTION
WHEN OTHERS THEN
RETURN -10000;
END TEST_FUNCTION2;
END PACKAGE_TEST;
++++++++++++++++++++++++++++++++++++++++
Then I tried to import the package into OWB (9.2). The problem came: all the package body and
the specification of TEST_FUNCTION1 were imported, but the package specification of
TEST_FUNCTION2 couldn't be imported. The IMPORT FILTER gave an error message:
"TEST_FUNCTION2: Argument Data type is not supported".
How to resolve this problem? It is very import for our project, since we have to import some
packages with user_defined collection data types as arguments.
Thank you.
Lushu

Hi Lushu,
Unfortunately this is indeed not supported and I would not know how to work around this one. The only way I guess that this would work is to not import it, and then use Expressions to call the function with inputs.
Jean-Pierre

V18 : can't import multiple articles with sidecar.xml ?

Hello,
I have successfully upgraged to v18 (tools and folio panel).
Now, I can't import multiple articles if there's a sidecar.xml file.
If I remove the sidecar, it works.
Do you experiment this problem ?
Thanks

Here's an example of a faulty sidecar.xml
<?xml version="1.0" encoding="UTF-8" standalone="true" ?>
<sidecar>
          
          
          <entry>
                    <folderName>couv</folderName>
                    <articleTitle>Couverture</articleTitle>
                    <author></author>
                    <kicker></kicker>
                    <description></description>
                    <tags></tags>
                    <isAd>false</isAd>
                    <smoothScrolling>never</smoothScrolling>
                    <isFlattenedStack>false</isFlattenedStack>
          </entry>
          
          <entry>
                    <folderName>intro</folderName>
                    <articleTitle>Introduction</articleTitle>
                    <author></author>
                    <kicker></kicker>
                    <description></description>
                    <tags></tags>
                    <isAd>false</isAd>
                    <smoothScrolling>never</smoothScrolling>
                    <isFlattenedStack>false</isFlattenedStack>
          </entry>
          
          <entry>
                    <folderName>sommaire</folderName>
                    <articleTitle>Sommaire</articleTitle>
                    <author></author>
                    <kicker></kicker>
                    <description></description>
                    <tags></tags>
                    <isAd>false</isAd>
                    <smoothScrolling>never</smoothScrolling>
                    <isFlattenedStack>false</isFlattenedStack>
          </entry>
          
          <entry>
                    <folderName>pubTV</folderName>
                    <articleTitle>Pub:TV</articleTitle>
                    <author></author>
                    <kicker></kicker>
                    <description></description>
                    <tags></tags>
                    <isAd>false</isAd>
                    <smoothScrolling>never</smoothScrolling>
                    <isFlattenedStack>false</isFlattenedStack>
          </entry>
</sidecar>

How can I import CD's with differing custom settings? IWhen I want to change settings the AAC encoder window does not appear because Itunes has adopted the first custom settings as default.

I imported a CD with custom settings for stereo bit rate, sample rate and channels. When I tried to import a second CD with different settings I could not get to the AAc encoder window that gave the settings options. The custom settings I had chosen for the first CD had become the default "custom" settings.

Hi there,
please take a look at my suggestion under message #19227279
regards,
Markus

Can't Import ICS Calendars with 10.2.1.2941

Hi all,
in the last couple of days, I tried import ICS calendars on my Z10 running 10.2.1.2941, and each time, the Calendar app only imports one of the events in the calendar.
The first time, I created a calendar for the 2014 World Cup using iCalendar on OS X 10.9.3, put it in an e-mail, downloaded it from the e-mail on my Z10 and tapped on the file in the list of downloads. At that point, I simply got the Calendar app's New Event screen for only one of the events and an option to save or cancel.
The 2nd time, I tried loading the calendar from http://bclions.com/schedule/importSchedule?year=2014&team=1&timezone=America/Vancouver , which worked perfectly on my Macbook Pro, but on my Z10, I got the Calendar app's New Event screen for only one of the events.
This looks like a bug in BB10's Calendar app. Is there a workaround, other than synching with my laptop or Google Calendar ?
One more thing, on my Z10, I have one local calendar, two Google calendars and a Facebook calendar. Syncing with the Google and FB calendars work perfectly.
Thanks.

My O/S is windows 7 home edition, the error is :
Please make sure that write privileges are enabled or that disk is not full.
How to give grant write privilege ? coz I have granted connect, resource, all privileges to REP_OWNER, REP_USER, OWBSYS .. but still can't.
Thanks for advance.

Can't import XML schema with ref to external namespace

In TopLink 10.1.3 Dev Preview 3 (build 041116), I have 2 simple schema files. One defines an element as a ref to an element in the other schema, so the ref points to an element in an external namespace. TopLink won't import this schema.
First schema, imports fine:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema
   xmlns:xs="http://www.w3.org/2001/XMLSchema"
   targetNamespace="http://www.oracle.com/employee"
   xmlns="http://www.oracle.com/employee"
   elementFormDefault="qualified"
   attributeFormDefault="unqualified">
     <xs:element name="employee">
       <xs:complexType>
         <xs:sequence>
                <xs:element name="name" type="xs:string"/>
         </xs:sequence>
       </xs:complexType>
     </xs:element>
</xs:schema>
Second schema, fails import with "ERROR: null. Please check to ensure the document conforms to the XML Schema specification and try again":
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema
   xmlns:xs="http://www.w3.org/2001/XMLSchema"
   targetNamespace="http://www.oracle.com/department"
   xmlns="http://www.oracle.com/department"
   xmlns:employee="http://www.oracle.com/employee"
   elementFormDefault="qualified"
   attributeFormDefault="unqualified">
   <xs:import
     namespace="http://www.oracle.com/employee"
         schemaLocation="employee.xsd"/>
   <xs:element name="department">
     <xs:complexType>
       <xs:sequence>
         <xs:element ref="employee:employee"         maxOccurs="unbounded"/>
       </xs:sequence>
     </xs:complexType>
   </xs:element>
</xs:schema>
Both schemas are valid according to the W3C schema validation checker at http://www.w3.org/2001/03/webdata/xsv.
I can work around the issue by putting the employee definitions into the department schema file so that all elements are in the same namespace. But I would like the schemas to be in separate files for better modularity and maintainability.
Am I doing something wrong? I would really like to be able to use references to external namespaces in my element definitions.
Thanks,
Dave

Hello David,
Apologies, but this is a bug in DP3 with respect to references to elements in imported namespaces. This has been fixed in current code, but until you get that, there are a couple ways to work around it:
==========================================================
1) Use an include rather than an import.
department.xsd
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema
    targetNamespace="http://www.oracle.com/department"
    xmlns="http://www.oracle.com/department"
    xmlns:xs="http://www.w3.org/2001/XMLSchema"
    elementFormDefault="qualified"
    attributeFormDefault="unqualified">
   <xs:include schemaLocation="employee.xsd"/>
   <xs:element name="department">
      <xs:complexType>
         <xs:sequence>
            <xs:element ref="employee" maxOccurs="unbounded"/>
         </xs:sequence>
      </xs:complexType>
   </xs:element>
</xs:schema>employee.xsd
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema
    xmlns:xs="http://www.w3.org/2001/XMLSchema"
    targetNamespace="http://www.oracle.com/department"
    xmlns="http://www.oracle.com/department"
    elementFormDefault="qualified"
    attributeFormDefault="unqualified">
   <xs:element name="employee">
      <xs:complexType>
         <xs:sequence>
            <xs:element name="name" type="xs:string"/>
         </xs:sequence>
      </xs:complexType>
   </xs:element>
</xs:schema>You should only have to import the parent schema (i.e. department.xsd), as the included document will automatically be built in. Note that this works for imports as well, provided that there aren't nasty bugs blocking the process.
==========================================================
2. Build everything into the same document
department.xsd
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema
    targetNamespace="http://www.oracle.com/department"
    xmlns="http://www.oracle.com/department"
    xmlns:xs="http://www.w3.org/2001/XMLSchema"
    elementFormDefault="qualified"
    attributeFormDefault="unqualified">
   <xs:element name="department">
      <xs:complexType>
         <xs:sequence>
            <xs:element ref="employee" maxOccurs="unbounded"/>
         </xs:sequence>
      </xs:complexType>
   </xs:element>
   <xs:element name="employee">
      <xs:complexType>
         <xs:sequence>
            <xs:element name="name" type="xs:string"/>
         </xs:sequence>
      </xs:complexType>
   </xs:element>
</xs:schema>Obviously, this one won't work quite as well in some cases.
==========================================================
Until you can get to the latest code, I hope this helps some.
- Paul

Can't import from camcorder with iMove '08

I'm no longer able to import my movies from my Sony camcorder. I was able to do so in July so I'm assuming there's a problem with the latest software. The camcorder is connected via USB (it show its connected) but iMovie does not come up with the import prompt it used to, nor can I select from Import (it only shows the built-in camera). I have more then enough space, I've tried multiple USB cables, even disconnected everything else, re-booted, powered down the camcorder--everything. Please help, this is very frustrating!

You don't say which camcorder you're using.
Many Canon camcorders will NOT work properly with anything else, e.g; an external disc, on the FireWire circuit. Sorry. For those, you'd need to import to the internal disc and then copy to the external, and continue editing with the external drive.
"..Could it be my firewire drive is too slow to record the video?.." No: all modern external FW drives are perfectly fast enough, and a 320gb is certainly a modern drive.
"..formatted Mac OS extended (journaled).." ..are you absolutely CERTAIN..? ..It needs to be, otherwise it'll do just as you describe. And even discs bought for Macs or from Mac stores generally come formatted as "PC Exchange", i.e; MS-DOS formatted. Check it again by right-clicking or Ctrl-clicking it and use 'Get Info'. If it really says "Mac OS Extended" you're OK. If not, you'll need to use Applications>Utilities>Disk Utility, select the name of the disc and click the 'Erase' tab (after you've moved off the disc anything which you might want to keep) and then select 'Mac OS Extended'. CAUTION: be sure that you've selected the external drive: don't accidentally reformat and wipe your internal drive!
"..Are there any settings I can adjust or other things to try?.." No. However..
Some camcorders are not properly recognised by iMovie at first. It pays to open a project which already has some footage in it, play that and then attach the camcorder and try importing. Playing back some existing DV footage often - in my experience, anyway - 'kick starts' the program into accepting more footage from the attached device.
But that only works if (a) the drive DEFINITELY is formatted as Mac OS Extended, and (b) you're NOT using a Canon with an external disc..

How can I "import" Facetime Camera with external USB microphone?

In Final Cut Pro, there's an option to "import" the FaceTime Camera. BUT, it only works with the built in mic on my laptop.
I also found a window for recording audio voiceovers That one lets me pic the mic, but doesn't have an option for video.
Is there a way to do this (in FCPX 10.1.1)
Thanks!
- Jack

I don't think you can do it with FCPX (I don't have a FaceTime camera and my webcam doesn't seem to work). But you can import with QuickTime Player X. Just open the app and select File->New Movie Recording.
Once you have a recording window open, you'll see a downpointing arrow in the controls box (see red circle in attached image. In that menu you can select the camera and audio input separately.

How can I import photos edited with Photos on iPad to iPhoto on Mac, including all edits??

During a long vakantion trip, I took many pictures and imported them in Photos on my iPad. And during the trip I edited many photos: croppig, changing colors and brightness, etc.
Now back home, I would like to import all these photos into iPhoto on my Mac, including all the edits of course.
I imported a few hundred and saw at once that the edits were not imported completely and not correctly (probably most is not imported).
Can anyone please advise how this should be done.
Thank you very much,
Frans

Making a trip, I import, select and edit pictures, as I have the time to do so. So, when I come back home, I expect importing to the Mac and reviewing only.
You are caught in the transit. If you still had iOS 7, that would have been no problem. Your edits in iPhoto on the iPad would have transferred to the Mac, and you would even have been able to undo the Camera filters. Unfortunately, iOS 8 is ahead of the photo applications on the Mac. The sidecar files with the edits transfer to the mac, but no software that I know of can read them. It will be better in a few month.
Do you know of any other application which can be used on both, iOS and OS X, to edit photos??
Right now, the only app I know is Pixelmator.
Pixelmator on the iPad can save and open files on iCloud Drive. But you would need to upgrade your Mac to Yosemite to use the new Pixelmator for Mac and to be able to access iCloud Drive from the Mac.

Can't import CD's with windows vista

I seem to be having the issue with windows media player to so i don't think it's an issue with Itunes but maybe someone can offer some advice on settings
I am using a plextor px810-sa on my over pc and when i put a cd in itunes see's it, then when i click to import it it starts the process but does not do anything, just kind of freezes and crashes after a while.
samething with windows media player

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Can't import javafx projext with NB 6.7.1

Similar Messages

Maybe you are looking for