Cancel Posted Excise invoice

Hi friends,
How to cancel posted excise invoice(GR is completed) ?
Regards,
Chetan

Hi friends,
I have already tried it in quality system.
1.After cancellation of GR.I tried to post excise invoice but system showing the messege that No Part I exists for availing credit in excise invoice TEST 1 2007
2.J1IH reverse the entry but system is not showing these entries in excise invoice.
so due to this while entering Vendor invoice in miro system showing tax amount from excise invoice.if reduce tax amount then system showing balance in transaction currency.please suggest me whst to do ?
Regards,
Chetan.

Similar Messages

Cancellation of posted excise invoice

Dear All,
How to cancel posted incoming excise invoice without cancelling the GRN.
User had posted the excise invoice wrogly so now they want to cancel that. For this we have to first reverse GRN but stock also get consumed meanwhile so system is not allowing to reverse GRN. How to resolve this?
Manoj

Dear All,
We can cancel the posted excise invoice for purchase also.
But for that we have to first revers the GRN.
Now in out case it is not possible to revers the GRN.
How to solve this?
Manoj

Not able to cancel the Excise invoice for STO process

Hi All,
In STO process, we need to cancel the excise invoice due to some business requirement. When we tried to do the same in J1IH, it is not allowing us to do the same with the error "No item information transferred into Accounting". Tried the same through J1IS with the internal Doc No. Here the error is document is complete.
Please guide how to cancel the same.

Hi,
STO has been created either through MM route or through SD-MM route.
In MM route, the process is as below,
You create PO, followed by MB1B (Transfer posting) , then followed by J1IS (Excise Invoice).
In SD-MM route the process is as below,
You create PO, followed by VL10B , then VF01, then followed by J1IIN (Excise Invoice from Factory).
Normally, when you create Excise Invoice through J1IIN, it is automatically released to Accounting.
In your case, I feel it has not yet been released to accounting and I hope, Excise Invoice has been created through J1IS.
In MM route, you need to release the Excise doc to Accounting.
In that case, you need to go for J1IV and release the same to accounting.
Find out the Internal document number from the Excise Invoice and with the reference of this Internal document number release it to Accounting through t.code J1IV.
Now, once it is released to accounting, you should be able to cancel it through J1IH or J1IS.
Please let me know if any further problem you are facing.
Regards
Pradyumna

Cancellation of excise invoice for depot

Is there any way out to cancel or reverse the excise invoice for depot??

Hi,
Which transaction you are using for posting excise invoice for depot? If it is J1IG, then it is difficult to cancel.
If it is J1IS, then you can select option Cancel & post the invoice
Regards,
Prashant Kolhatkar

Reverse the material document before cancelling the excise invoice.

Dear Experts,
While cancelling the exice invoice thru J1iex , system is giving me an error message "Reverse the material document before cancelling the excise invoice" .......I checked PO history where all the material documents are already cancelled with MIGO cancellation (movement 106 )
But in J1iex , if I select the cancel option and put this invoice number , it is showing me one document with status "IN PROCESS" and if I select that doc and try to save it. System prompted me the message "Reverse the material document before cancelling the excise invoice ,but if I am trying to post this document system is issuing me a message "All Part I entries have been canceled for excise invoice ...........xx.Exicse table J_1IGRXREF and J_1IPART1 alrady update with both documents.kindly any one suggest me positive.
MINI

Hello
follow the below steps
1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
Thus the excise postings are reversed.
3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
above the procedure right. you will get this updation excise registers also
Laxman

Cancellation of Excise invoice after MIRO

Hi Everybody,
How do i cancel the Excise Invoice after MIRO.my scenario is Net Inclusive of Excise duty. the procedures which i followed as follows,
1.PO with Zero Tax code > J1iex(captured the Excise Invoice)>GR which refers EI>Posted EI.
After posting EI i found thats wrongly captured then i did canceled the EI as follows
2. GR Cancellation>Posted EI against canceled GR>Canceled the EI.
Now my RG23A got cleared.then i did again step 1 as well as MIRO.After did miro again i found that captured EI is Wrong. I have to followed below procedure to Cancel the EI,
3.Cancell the MIRO document in MR8M>GR Cancellation>Posted EI against canceled GR>Canceled the EI.
When i tried to POST EI one pop up message is coming i.e status of EI one is for INPROCESS another one one is for Posted .I chose Inprocess and entered i was getting following Error
No Part I exists for availing credit in excise invoice 364 2008
Message no. 4F112
If i Chose POSTED i was getting following error,
Excise invoice 364 2008 has already been posted for vendor 103769
Message no. 4F107.
Can anybody tell me where i'm wrong what procedure i need to follow
Regards
Govindaraj

hi
plz check the document year for inprocess and posted doc
now steps for excise invoice cancellation will be as follows
1 cancel MIRO document with MR8M
2 cancel MIGO document in MIGO
3 goto J1IEX choose post here give the excise invoice no of the document (u will get this no from table J_1IEXCDTL and field DOCNO)
4 now in misclinious tab give the rejection code and simulate u will find all the duties are reversed (compare with previous posting)
5 now ur invoice is cancelled and u can go for new GR and new postings
regards
kunal

Reversal of posted Excise invoice ??

Hii
Some body explain the steps involved in reversal of excise invoice posted..??
Like i have created Po, GR done , uring GR i have captured and posted excise invoice .
Now i wanted to reverse the availed CENVAT credit and reversal of excise invoice posted .
Thanks

Hi,
01. Reverse the goods receipt.
The system:
Creates a reversal document to cancel the goods receipt
Creates additional entries in Part I of the appropriate excise register to reverse the original entries
Changes the excise invoice document status to In process.
Reversing Goods Receipts
From the SAP Easy Access screen, choose Logistics --> Materials Management --> Inventory Management --> Goods Movement --> Goods Movement (MIGO).
In the top line:
Select Cancellation.
Select Material document.
Enter the number of the goods receipt that you want to cancel
Choose .
Flag all of the line items as OK.
Save the reversal document.
02.. Reverse the CENVAT posting on the excise invoice.
The system:
Creates an accounting document to reverse the CENVAT postings
Creates a corresponding entry in Part II of the appropriate excise register
Reversing CENVAT Postings
From the SAP Easy Access screen, choose Indirect Taxes --> Procurement --> Excise Invoice --> Incoming Excise Invoices --> Individual Processing --> Change/Display/Post/Cancel.
In the top line:
Select Post CENVAT.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Choose Simulate CENVAT.
A dialog box appears, showing which postings the system will make to reverse the CENVAT.
To close the dialog box, choose .
Choose Post CENVAT.
03. Cancel the excise invoice.
The system changes the excise invoice status to Canceled.
Canceling Excise Invoices
From the SAP Easy Access screen, choose Indirect Taxes --> Procurement --> Excise Invoice --> Incoming Excise Invoices --> Individual Processing --> Change/Display/Post/Cancel.
In the top line:
Select Cancel.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Save the excise invoice.
Regards
KK

J1IEX, error while posting Excise Invoice

Dera Gurus,
While posting the excise invoice for the invoice which has already been captured at the time of MIGO, I am getting the error message " All Part I entries have been canceled for excise invoice 5810 2009"
I have checked the PO history and found that the GR has also not been canceled and moreover the entries are being posted in RG23A Part 1 table. The movemet type 101 has also been maintained for the updation of RG23A part 1
The only thing that I have found suspicious is while displaying the Excise invoice is that Quantity available for CENVAT credit is Zero. I think this field needs to populated. How does this this field gets populated.
Regards
Prabhjot Singh
Edited by: Prabhjot Singh Nayyar on Jun 15, 2009 10:11 AM

Dear All,
I have already checked the table for the Part 1 entry, the Part 1 register is getting updated but it is now allowing me to post the Excise Invoice. As soon as I try to post the Excise Invoice, it gives me the error message " All Part I entries have been canceled for excise invoice 5810 2008 "
Regards
Prabhjot Singh

Problem in Capturing & Posting Excise Invoice

Dear Experts,
As my client is facing problem to post Excise Invoice.
User has done Import PO, Invoice Verification for custom duties(BOE) and GRN. When i am going to capture excise invoice reference with Material Document i found that Part I entry is already created but Internal Number and Year showing Zero i.e.not generated.
User already dispatched material so we cant cancel GRN and update RG23A Part I entry through J1I5. Now i need to Post excise invoice but i dont have Vendor Excise Invoice and Internal Excise Invoice Number. Please tell me procedure that how to Update RG23A Part II entry.
Immediate reply appreciated.
Sac

hi,
there seems to be some problem at the time of GR.
Since Part1 has been created , its a bit difficult to take part1 because as u told internal no. & year is bank.
How ever you can folow one of the paths below to serve your purpose of cenvat credit availament.
1. Capture against GRN -J1IEX and save. Check whether part1 link is available with the ID.
If not take the credit through J1IH->additional Excise & give ID no. as reference doc no there.
2. If Part1 tab is present after creation of ID but credit available is zero, try changing the material type & saving the ID which will trigger A part1 cancellation so that correct part1 can be done later & credit can be availed through j1iex itself.
These steps may involve a solution other possibility which is always open is debug but thats not suggested.

User Exist or BADI to restrict cancellation of Excise Invoice..!!!!!

Hi,
After Creation of Commercial Invoice or MIGO the excise invoice should not be canceled , We are using following doc flow for creation of excise invoice
Delivery - - > Proforma Invoice - - > Excise Invoice - - > Commercial Invoice.
So what should we use ( User Exist or BADI ) to restrict cancellation of Excise Invoice ???
T-code : J1IIN
Ankesh

I think you are very much aware of forum rules and still posting
duplicate threads.
Do you want to be a guest of julius ?

Cancellation of excise invoice part II entry

can anybody help me about cancellation of excise part II entry
how it is done
i did transaction J1ih for cancellation of excise invoice but it shows error
excise and modvat accout not defined for CEIV transaction and excise group

Dear Sujitkumar Borse,
Pls follow the steps for Cancellation of Excise invoice part II:
Canceling Excise Invoices
T.code:J1ILN
Path:
From the
SAP Easy Access screen, choose
Indirect Taxes - Procurement -Excise Invoice - Incoming Excise Invoices - Individual Processing - Change/Display/Post/Cancel.
In the top line:
1. Select Cancel.
2. Select Vendor Excise Invoice.
3. Enter the excise invoice number.
4. Choose .
5. Save the excise invoice.
With regards,
B.Ravindranath

Cancel the excise invoice through J1IEX

Hi
1) My client has captured the excise through J1IEX
2) The excise has been captured
3) Necessary Accounting entries has been captured in the RG23A registered
4) Now my client wants to cancel the doc
5) the tried to cancel through J1IEX
6) but the system has through the error message as Excise invoice 550A 2008 has already been posted for vendor C500B
how to cancel the excise doc plz help
Raghuram

Hi Raghuram,
If you want to cancel the posted Excise Invoice, pls follow the below steps..
1)Lets assume you hav posted Ecx inv(for ex: xyz) in J1IEX .then done MIGO
2) cancelled GR using 122 or 102 mov type.
3)Fine now to cancel Exc Inv again go to J1IEX select POST & Vendor Exc Inv (same xyz) & save it.
4)Again go to J1IEX select Cancel option for same xyz & save it.
5)You can check the status in display mode of J1IEX.
Hope its clear.
Regds

Cancel J1IS Excise Invoice

Dear All,
I have created an outgoing Excise Invoice through J1IS and also POsted it..
But due to some reason, i have to Cancel the Excise Invoice Document that was created..
So i went to J1IS and Cancelled the Excise INvoice.
The Excise Invoice shows CANCELLED... But the Reversal Accounting Document is not generated for the same.
Kindly suggest how do we do.. Is this is the right way for cancelling?
Regards,
Jyotsna Loomba

hi,
i guess the accounting documents should be cancelled by FI guys...
once they cancel these documents then u can go for further process

All Part1 entries have been cancelled for excise invoice 943 2010

Dear Experts,
User made mistake in MIGO,but we have already captured excise for the material.The PO is created for Project stock
internal order(300425).User canceled MIGO and try to Post excise invoice,but system is giving the message all part1 entries
have been canceled.But,when i checked J_1iPART1 .i can able to find the part1 entries against the material document.please guide me.
Regards,
Varun

Hi,
It seems that GR /Part I is cancelled, & for the same your are trying to capture/post the excise invoice using J1IEX .
You need to GR with Excise details then only you can able to Post the Excise invoice.
Check the Invoice status in J1IEX display against vendor invoice no.
Rg

J1iex - All part 1 entries have been cancelled for excise invoice

Dear Gurus,
Please help me to resolve the issue, I have captured part 1 excise invoice at the time of MIGO, internal excise invoice no generated. With the reference of internal excise invoice, I am trying to post part2 excise invoice through j1iex. At that time am getting the below error.
All part 1 entries have been cancelled for excise invoice 80000 2011
Message no. 4F113
In j_1ipart1 am seeing two line items for single material document which has a goods movement direction with R & I. Would this is being cause any issue. Please advise.
Thanks & Regards,
mohdsams.

Because of account assignment, system consumes the goods automatically. Hence the issue is resolved.

Cancel Posted Excise invoice

Similar Messages

Maybe you are looking for