Cancellation of PR release after RFQ

We are able to cancel the release via ME54N after RFQ, but getting error while attempting to do the same via BAPI_REQUISITION_RESET_RELEASE. I was checking to see if there is any OSS note for this, but I could not find anything on this subject.
I had seen that ME54 has the similar behaviour.. Does it mean we should not use BAPI_REQUISITION_RESET_RELEASE for cancel ling the release?

OSS Note 686022 - ME54N: error messages ME109 and ME110 not processed.
explains:
ME54N allows the user to unrelease a purchase requisition linked to a purchase order or a request for quotation. This is correct behaviour and constitutes a new design.
so the question left is: is the BAPI older than this new design?
I guess yes.
this BAPI calls Funtion module ME_RESET_RELEASE, and there SAP checks if the new release indicator allows RFQ creation. if not, then error ME109 is raised.

Similar Messages

When will the File menuitem on OS X be released after having opened and cancelled out of the Import window with Fx 4 beta 12?

This [http://img638.imageshack.us/img638/4186/screenshot20110226at124.png (Image)File menuitem not released after closing Import window.]
It has been there since early Firefox 4 betas. With 3.6 and 3.5 of Firefox it happened with the Tools and Bookmarks menuitem, also on Leopard and Snow Leopard the same way like the screenshot above. It happens more often that I would like. I'm not in the File menu at all and yet it's highlighted. I've closed the Firefox window and reopened a new window but the File menu remains active until I actively press it again or any other menu in the Firefox 4 menubar.
You can try it by choosing the File menu -> Import and then simply close the Import window and return to Firefox 4 for a browsing session. Does the File menuitem remain active? Happens each time now that I figured out the correct trigger that I mentioned with the Import window.

Hi Rick & Todd
thanks for testing & responding
@ Rick - ProRes cannot be fixed with color management. At all. It is a problem that adobe has setting a correct quicktime gamma flag.
I am color-tight if re-importing encoded file back in to AE or any other adobe app. When exporting to PR or Quicktime in General, something is going terribly wrong.
@ Todd - This whole thing did not leave me alone and I have figured out what the problem is (aside from the Quicktime issue)
If AE's Audio Hardware Preferences is set to anything else than built-in audio this problem occurs. Setting it to Built-in Audio all the issues are remedied.
@ Todd - I have Crash Reporter Enabled.. but AE never crashes ;-)
@ Todd - I spent the better half of this year beta testing PT 11 for AVID along with another dedicated set of folks... The reason we test so long prior to release is to get rid of all the small issues that should never surface in a commercial software. Of Course you cannot get all of them but such as testing the audio hardware capabilites of AE prior to a major release should have been cought by the beta crew.. If any.
The quicktime issues are long standing - how about opening contact with Apple ( you are a developer and entitled to Apple Support) and tell them about the problem. And have them help you.
I mean, you offer Speedgrade which is a fantastic app, PPRO, AE & PS (All great) but what good is greatness if neihter is able to deliver. The quicktime file is being displayed with a .8955 gamma offset (What one would have to offset the quicktime file by) when viewed in any other app than adobe's That is a lot.

Cancelation of PR release

Hello All,
We have made a release strategy for PR. in that release status mainatined was X- Blocked and 2 for release for RFQ/PO. Then in configuration release indicator was cheanged from X to 1.
We have activated version management for PR document.
Then we tried to unrelease the earlier PR documents cleared with this release strategy before making this configuration change but system is not allowing to change the old PR document which were released before applying this change and it gives message ME 108, " No new release indicator can be determined"
Hence we changed the release status from 1 to X but still the system gives the same message.
System is not giving any message for the new documents which are generated after making this change.
Please help.
Thanks.

Hello Sanjay,
Most of this kind of problem, error message ME 108, was due to the deletion or change of some release code by customer, which existed earlier. This can lead to the inconsistency and hence now if you try to cancel the release you get the error.
I would suggest you to recreate the release code that you had earlier for the related release strategy in order to cancel the release.
Please note that deletion of release strategy should be done very carefully.
For details, please review note 365604.
I hope this information helps.
Best Regards,
Gabriela Prass

Paper won't release after printing

I don't know if it happened after a techie at HP suggested a different driver to access the e-print functions on my HP Envy printer, but some times the paper won't be released after printing. I have to give it another function, then cancel the function, to get the printout.

Hi
I see.
Have you by chance set the Docked icon to Keep In Dock, found by clicking and holding down on the docked icon?
Furthermore you say the printer icon stays open showing a green arrow, so is that both the printer utility and the printer both showing in the dock?
i think normally, there should only be the printer utility, a green open printer symbol doesn't ring a bell, so to speak.
roam

Problem in cancel the PO release

Hi,
I changed the PO release level after that I am not able to cancel the already released POu2019s. How I solve this problem.
Karthick.

Hello,
You can send purchase order via e-mail in SAP system, there are some configurations and pre-requisites to do as follow:
1. You must maintain an e-mail address in the address in the vendor master.
2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
Note that it is not possible to change the e-mail address of the vendor via the SAP purchase order transaction (ME21N, ME22N, and so on). The system only uses the e-mail address of the vendor that is maintained in the vendor master!
3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
5. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
For more details, check out the OSS note :191470
Hope this will help.
Regards,
Abdul

Memory does not get released after encrypting/ decrypting files.

I am using javax.crypto package to encypt/decrypt files but the problem is that once a big file (around 100- 700 mb) is encrypted there is spike in memory of 70 Mb (first time) and whole of this memory is not released after execution is finished. I have kept my application run for days but this memory do not come down.
Interesting thing is if I encrpyt/ decrypt the same file again and again the memory do not rise by 70 Mb, but for first 3-4 iterations 5-8 Mb of memory is released in each iteration and after that memory starts increasing again in chunk of 2-5 Mb and after few iteration some memory get released but in all the memory always increases. The code to encrypt file is simple
Cipher c = Cipher.getInstance("AES/CBC/PKCS5Padding");
byte[] salt = generateRandomBytes(16);
Rfc2898DeriveBytes rfc = new Rfc2898DeriveBytes("123456", salt, 1000);
SecretKey key = new SecretKeySpec(rfc.getBytes(32), "AES");
c.init(Cipher.ENCRYPT_MODE, key );
FileOutputStream fos = new FileOutputStream(encryptedFile);
CipherOutputStream cos = new CipherOutputStream(fos);
FileInputStream fis = new FileInputStream(largeInputFile);
int len = 0;
byte[] buf = new byte[1024 * 128];
while((len = fis.read(buf)) != -1) {
cos.write(buf, 0, len);
cos.close();
fis.close();
This is simple observation I have seen in my program:
I am using Windows 7 64 bit with 16 GB RAM Intel Core 2 Duo 3.00 GHz and file encrypted was 700 MB size
Explanation
Memory Usage (As shown in Windows Task Manager Private Working Set column)
When program starts
9924 K
After first iteration of encryption
81,180 K
Second Iteration
78,254 K
3 Iteration
74,614 K
4 Iteration
69,523 K
5 Iteration
72,256 K
6 Iteration
70,152 K
7 Iteration
83,327 K
8 Iteration
85,613 K
9 Iteration
95,124 K
10 Iteration
92,698 K
11 Iteration
94,670 K
I kept the iteration on for 2000 iteration, the same pattern was observed and at the end memory usage 184,951 K, this memory was not released after calling System.gc() also.
What could be the possible problem, is it the CipherOutputStream or Cipher class having some memory leak or I am doing something wrong here?

ash wrote:
We are using WebLogic Server 7.0 runing on Solaris 2.7.
We are experiencing a problem where the memory does not seem to be released after
the application has been shut down.What do you mean by "application has been shut down"? Is the server
process running or not? Is it a zombie?
The
Unix 'top' command reports that memory has not been reclaimed by the O/S. What exactly has it reported? If the process is gone, then I'm pretty
sure your O/S has reclaimed the memory. What exactly are you looking at
in top?
-- Rob
> Continue
restarting it will forces us to reboot the server as there will be more and more
memory lost when restarting the WebLogic.
Advice to fix the problem is much appreciated. Thanks.

Cancellation of Excise invoice after MIRO

Hi Everybody,
How do i cancel the Excise Invoice after MIRO.my scenario is Net Inclusive of Excise duty. the procedures which i followed as follows,
1.PO with Zero Tax code > J1iex(captured the Excise Invoice)>GR which refers EI>Posted EI.
After posting EI i found thats wrongly captured then i did canceled the EI as follows
2. GR Cancellation>Posted EI against canceled GR>Canceled the EI.
Now my RG23A got cleared.then i did again step 1 as well as MIRO.After did miro again i found that captured EI is Wrong. I have to followed below procedure to Cancel the EI,
3.Cancell the MIRO document in MR8M>GR Cancellation>Posted EI against canceled GR>Canceled the EI.
When i tried to POST EI one pop up message is coming i.e status of EI one is for INPROCESS another one one is for Posted .I chose Inprocess and entered i was getting following Error
No Part I exists for availing credit in excise invoice 364 2008
Message no. 4F112
If i Chose POSTED i was getting following error,
Excise invoice 364 2008 has already been posted for vendor 103769
Message no. 4F107.
Can anybody tell me where i'm wrong what procedure i need to follow
Regards
Govindaraj

hi
plz check the document year for inprocess and posted doc
now steps for excise invoice cancellation will be as follows
1 cancel MIRO document with MR8M
2 cancel MIGO document in MIGO
3 goto J1IEX choose post here give the excise invoice no of the document (u will get this no from table J_1IEXCDTL and field DOCNO)
4 now in misclinious tab give the rejection code and simulate u will find all the duties are reversed (compare with previous posting)
5 now ur invoice is cancelled and u can go for new GR and new postings
regards
kunal

HT3702 I have paid once for one month subscription for al jazeera sport live app. I just released after few months that they are automatically charging me on monthly bases. How i can stop them charging me for something i did not use and i did not authoriz

I have paid once for one month subscription for al jazeera sport live app. I just released after few months that they are automatically charging me on monthly bases. How i can stop them charging me for something i did not use and i did not authorize?

You possibly set up an auto-renewing subscription with the app - there are instructions on this page on how to manage them, including how to stop them : http://support.apple.com/kb/HT4098

How to Cancel an outgoing payment after reconcilliation

Hi guys,
I want to know whether we can cancel an outgoing Payments after Reconciling the Outgoing payment with JE.
I tries to cancel by right clicking on the document but its showing some error message like we cant cancel the payment after automatic reconciliation.
If any body knows how to cancel the outgoing payment which has been reconcilied pls tell me..
Regards,
Vamsi

Hi Vamsi,
You need to first cancel the reconcilition before you can do this.
One of the reasons is that a counter journal will be created when cancelling the payment and that one will be autonatically reconciled with payment transaction. As this one is already reconciled it would not be logical, any one amount can only be reconciled with one other.
I hope that is clear.
Jesper

How do I cancel out of Revel after mistakenly signing into a new account?

How can I cancel out of Revel after signing into a new account?

Cancelling Revel will not impact Elements or any other product that uses the same email for the adobe id. It will, however, delete all the photos that are stored in the Revel cloud.
You mention Photoshop, I presume you mean photoshop.com? This service is being discontinued, which is why users were given the option to have their files migrated to Revel as an alternative cloud storage. By June 18, all users who wished to migrate should be migrated and the Photoshop.com sharing and storage will close.
The migration was not done without giving the customers an option. Emails were sent out to users explaining that Photoshop.com was about to be discontinued, and informing users that their files would be migrated to Revel unless they opted out. This was done as a courtesy so that users could have a means of saving all their photos (jpg) on the cloud for viewing and sharing without having to go to the effort of archiving and re-uploading. Additional emails went out closer to the time. The opt out period has ended and we are in the transition period actively migrating photos to Revel.
If you want to keep the files on Revel that are there currently, you can keep a free account and retain the storage there and share the albums if you choose. If you want to delete your account, then I can also take care of that for you. I will send you an email to confirm.
Pattie

Can we delete or cancel a Transfer order after confirmation?

Hi,
We want to delete or Cancel a Transfer order after confirmation.
We reversed PGI, cancelled shipment and trying to delete a line in the delivery, but it says "item already confirmed by TO".
Any pointers?
Thanks
Edited by: Chandru on Jun 28, 2008 3:01 AM

Hello,
Cancellation of TO - LT15.
Cancellation of TO for Storage unit - LT16.
LT0G - Return delivery to stock
Prase

Secondary mouse button automatically releases after 3 sec

*Secondary mouse button automatically releases after 3 sec even if still pressed* since upgrade to snow leopard. I have to use extra switches attached via USB being unable to move my arms.
Apart from that Airport works after adding Location, I am still not able to access internet or mail, skype and time machine backups work. Switching to my neighbours unsecured WLAN I have no problems accessing mail and internet.
A guest with a PC was also unable to use my WLAN, he was able to connect (gave him password) but could not use internet.
Any ideas? The "secondary mouse button automatically releases after 3 sec" issue seems not to be posted yet.

Hi @devitojj
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that when you power off your notebook it automatically restarts in 4 seconds.
You have tried several steps to try and resolve this but there is no change.
As it repeated the behavior with the hard drive removed, you know it is not an issue with Windows.
You have tried updating the bios and returning it to bios defaults but no change.
Here is a link from answers.microsoft.com that helped other people with this issue.
Windows 7 computer restarts automatically after shutdown
This does suggest you edit your registry which does have the potential to cause issues, so be very careful. I would also suggest backing up your registry before you attempt it, just in case.
Back up the registry from Windows.microsoft.com
If that has not helped, I would try removing the Cmos or RTC battery for 30 seconds and then replacing it.
Please let me know if this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Upcoming releases after forms 9i

Can anyone give me more info on any upcoming releases
after forms 9i?
What are new features that will be implemented?
What is the timeframe (a month, a year, several years)?
Are any statements of direction available to the public on this?
Thx

Kevin,
Forms9i will have new features in one of the upcoming patch sets,
like we did for Forms6i.
In client/server customers have been very reluctant in patching
their Forms client installation if not necessary. This was
because of the time consuming task shaking hands with each single
PC.
Now that our software runs on the server only we are planning to
add new features in one of the upcoming patch sets of Forms9i,
all of them not requiring a Forms application to recompile.
Features that get added first are focussing on performance and
security. Your application will benefit from this enhancements
without knowing and all that may be required is parameter to be
set in the Forms configuration file.
If there are enhancements that can be used within the application code
then we doc this in the release notes and or an accompanying Whitepaper
published on OTN.
Like Robin said, we are not in a hurry with a new major release
because we have a vehicle to add new features. After Forms9i, as we see
it, there still is Forms9i. There will be a next major release, no doubt
about it, but we don't know a release date.
Hope this explains why we don't have a list of new features ready to go
into the next major release. Of course we have tons of ideas, but these
are not approved and we don't wanna send fiction to this list.
regards
Frank
Ps.: So far I am hopig that you like what you get in Forms9i.

Which is the Latest version to be released after SAP MDM 7.1 version ?

Can any body give me the details about the latest version to be released after SAP MDM 7.1?
Thanks & Regards,
Krishna ..

Hi Krishna,
as far as i know MDM 7.1 general versions for user is still about to come.
but With SAP NetWeaver Master Data Management 7.1, SAP has enhanced the MDM technology foundation to build pre-packaged business scenarios and integration. This SAP NetWeaver MDM release has been in ramp-up shipment since the end of November 2008.
But for 7.1 some highlights are
Extended flexibility for data modeling and support for complex objects
Higher performance and improved inbound and outbound processing e.g. through native MDM adapter for SAP NetWeaver Process Integration
Enhanced integration into SAP NetWeaver standard administration and life-cycle components
after successful Operation with this I guess new release will mess up.
Hope it helps.
Rgds
Deepak

Purcahse document cannot be released after PO reject using ME29N

Hi gurus/experts,
is it SAP standard behaviour that once PO was rejected using ME9N, the PO document cannot be release anymore ?
if that is tha case, how can an approval reject the approval so that the release status can go back to previous release code ?
TQ

Hi,
It is possible to go back into ME29N and cancel the rejection, then the purchase order is available for approval again. The reject icon will change to a reverse rejection button after the rejection is done..
Normal process is after rejection the buyer will cancel the rejection, make any necessary changes and save. This will return the purchase order for approval. The buyers changes may reset the entire approval process if they exceed the conditions configured for resetting the approvals.
James

Cancellation of PR release after RFQ

Similar Messages

Maybe you are looking for