Cannot connect to web site or get podcast

Around Xmas, I noticed that one of the podcasts I subscribe to through itunes had stopped updating. I then tried going to the source site with Safari, and it too wouldn't load. I chalked it up to a server being down, and tried again a couple days later. Turns out the site seems fine. I can get to it from work (on an XP machine), I can ping it from my emac just fine, but trying to get to it through Safari or Camino returns nothing. The connection doesn't time out (I let the page request run overnight once just to see what happens). I have flushed the lookupd, rebooted the router and emac. I have checked the router logs, and it doesn't appear to even log the request for the site. I can get to the site using one of the browsing anonymizer systems. Frankly I'm stumped. I hadn't made any changes at that time. I have since loaded the latest 10.4 update, and run the update permissions, reset Safari. Still nothing.
Any thoughts? The site I am referring to is www.wdwinfo.com. I posted something on one of their other sites, and got a response from another Mac user that he/she was also having this problem, but no solutions.
Any suggestions would be appreciated.
John.

Thanks for the suggestions. I tried it with another account on the same computer. I also tried your suggestion on the dns servers as well. Your suggestions also had me try something else. I have an ibook, so I pulled it up, using airport to connect to the same dsl router via wifi. I tried to connect to the site with the ibook, with the same result. No connection, it just sits and spins when I try to connect.
Could it be the router somehow?

Similar Messages

Cannot start default web site

I was being a nice husband and moving my wife to a new machine while she is in India on business. I went to join the machine using the connector and the connector install failed. During the troubleshooting of this issue I installed patches and rebooted.
I do not often patch so there were a few. Upon reboot I am unable to start the default website. I get the error This website cannot be started. Another website may be using the same port. I also did a netstat –o to see if anything was running on port 80. Can
anyone assist me?
C:\Users\Administrator>netstat -o
Active Connections
Proto Local Address Foreign Address State PID
TCP 10.0.0.114:389 whs:61103 ESTABLISHED 516
TCP 10.0.0.114:445 10.0.0.88:55375 ESTABLISHED 4
TCP 10.0.0.114:445 10.0.0.118:49169 ESTABLISHED 4
TCP 10.0.0.114:3389 10.0.0.118:54357 ESTABLISHED 3260
TCP 10.0.0.114:6602 10.0.0.88:51644 ESTABLISHED 1696
TCP 10.0.0.114:6602 10.0.0.88:51656 ESTABLISHED 1696
TCP 10.0.0.114:6602 10.0.0.118:49159 ESTABLISHED 1696
TCP 10.0.0.114:6602 10.0.0.118:49163 ESTABLISHED 1696
TCP 10.0.0.114:61103 whs:ldap ESTABLISHED 3268
TCP 127.0.0.1:49175 whs:65532 ESTABLISHED 3060
TCP 127.0.0.1:49177 whs:65532 ESTABLISHED 3060
TCP 127.0.0.1:49178 whs:65532 ESTABLISHED 3060
TCP 127.0.0.1:49179 whs:65532 ESTABLISHED 3060
TCP 127.0.0.1:49191 whs:65532 ESTABLISHED 3204
TCP 127.0.0.1:49193 whs:65532 ESTABLISHED 3204

Hi,
What's your mean of "cannot start default web site"？
If you mean that the client can't access the website, please follow the troubleshooting steps below:
Please try to ping an external IP address. If timeout occurs, this is a connectivity issue. You need to check the IP address, netmask, gateway, DNS.
Please try to run nslookup www.microsoft.com. If this website can't be resolved, this is a DNS issue. Please check the DNS settings and the firewall settings.
If all these tests passed, please try to reset your Internet Explorer.
If you mean that the server can't start the website in IIS, please check if there is any warning or error in the event viewer of the server. Besides, please try to start the IIS manually. If any error pops up, please post it here. It may give some hints.
Best regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HP Color Laserjet PRO MFP M177FW Cannot connect to web services

I bought a HP Color Laserjet PRO MFP M177FW today and I set up it. It can print and scan over wireless network. However, It cannot connect to web services correctly. I set the DNS numbers with google DNS addresses. I changed its IP address with manually. The IP address is unique. Normally It doesn't enable/remove webservices. But when I restart it, it can do for few minutes. It can take an e-mail address but It doesn't print any information sheet. When I try to print a sheet It says "Connection Problem" at first few minutes and later it says "Connecting"and it waits, there is no error message. What am I suppossed to do? Please help me.
This question was solved.
View Solution.

Hello rasitbolukcu,
Welcome to the HP Support forums. I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document. It will walk you through ensuring the printer has the latest firmware. Once you have updated the printer, please try to enable the web services again.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Safari Message: "Internet Explorer Cannot Display the Web Site" ?!?!?

Safari is running strangely on my new MacBook Pro. It has decided to NOT automatically add .com
when I type an address ..... THEN, when it can't find the website I get the message
"Internet Explorer Cannot Display the Web Site". ***.
Could the IE I am using when I'm using Windows XP (via Bootcamp) have corrupted Safari somehow?
Ideas, please! Thanks.

I found that the DNS settings in system prefs> networks > advanced had been mysteriously changed to something rather "foreign". An archive and Install solved the problem. Did your client happen to install a program called "Glim" (a Safari "enhancer"). That's our suspect.

"Configuration Manager cannot connect to the site" after site update from SP1 to R2

Our dev SCCM environment only has a single primary site with a remote SQL database. Initially, the dev primary site had SP1 Beta (5.00.7782.1000) installed but as everyone is aware there is no upgrade path available to SP1 or R2 from Beta; so, we uninstalled
the site and removed the database, re-installed SP1 non-Beta (5.00.7804.1000), then proceeded to update all devices with the latest client agent. Afterwards, we attempted to upgrade the site from SP1 non-Beta (5.00.7804.1000) to R2 (5.00.7958.1000).
All seemed well until we attempt to open the Configuration Manager console and we get the following error message:
Configuration Manager cannot connect to the site (Site Name)
The Configuration Manager Administrator console could not connect to the Configuration Manager site database. Verify the version of the console is compatible with the version of the site server you are connecting to and then try to connect again.
So we tried reinstalling the console directly from here...
"C:\Program Files\Microsoft Configuration Manager\tools\ConsoleSetup\AdminConsole.msi"
still the same error message persisted, so we tried installing it from here...
"C:\Program Files\Microsoft Configuration Manager\tools\ConsoleSetup\ConsoleSetup.exe"
still the same error message persisted, so then we tried installing it directly from the R2 (5.00.7958.1000) installation media, and afterwards the same error message persisted....
All along, we were checking the AdminConsole log from here:
"C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\AdminUILog\SmsAdminUI.log"
Here are the contents:
[4, PID:4836][04/22/2014 15:21:10] :Property: 'Features'\r\nSystem.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
[4, PID:4836][04/22/2014 15:21:10] :ReadExtraProperties: Failed to initialize extra properties
[4, PID:4836][04/22/2014 15:21:11] :Transport error; failed to connect, message: 'The Configuration Manager Administrator console could not connect to the Configuration Manager site database. Verify the version of the console is compatible with the version
of the site server you are connecting to and then try to connect again.'\r\nMicrosoft.ConfigurationManagement.ManagementProvider.SmsConnectionWithDetailException\r\nThe Configuration Manager Administrator console could not connect to the Configuration Manager
site database. Verify the version of the console is compatible with the version of the site server you are connecting to and then try to connect again.\r\n at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.ValidateConnectionParameters(ConnectionManagerBase
connection)
at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\nNo details are available for this error.\r\n
Once again, we validated we could connect to the SQL database from this box, and that the console was at the same version as the site. Any help or guidance with getting our access to the console restored after the SP1 to R2 upgrade would be greatly
appreciated.

From the Primary Site Server, I tried uninstalling the Admin Console and re-installing using:
consolesetup.exe /q TargetDir="%ProgramFiles%\Microsoft Configuration Manager" EnableSQM=0 DefaultSiteServerName=<SiteServerName>
Of course replacing <SiteServerName> with the FQDN of my Primary Site Server. Console installed successfully however the same error message persists.
Also tried installing the console on a clean Windows Server 2008 R2 installation. I tried it from the R2 (5.00.7958.1000) installation media, from the "C:\Program Files\Microsoft Configuration Manager\tools\ConsoleSetup\" both without any luck, the
same error message persists. I verified I could ping the FQDN of the site server also, and that the firewall between the two permits communication over the ports listed here: http://technet.microsoft.com/en-us/library/hh427328.aspx
Any help would be greatly appreciated.

Setting up eprint - cannot connect to Web Services

HP 7510 - new install - eprint cannot connect to Web Services

Hi,
You may have to wait and retry. The site may go down for maintenance. OR you may wat to try this:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Envy-110-Printer-Cannot-Enable-Web-Services/td...
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Firefox cannot open any web site except facebook

firefox cannot open any web site except facebook.when i browse other site except facebook, it automatically open facebook.

Does Blackberry Link install any add-ons into Firefox? You can check here:
orange Firefox button (or Tools menu) > Add-ons > Plugins category<br>
orange Firefox button (or Tools menu) > Add-ons > Extensions category
Also, does Blackberry Link create any Windows network connections? To make sure Firefox isn't randomly choosing dysfunctional networks, check your proxy setting here:
orange Firefox button (or Tools menu) > Options > Advanced > Network > "Settings" button
If you have Auto-detect, try either No Proxy or Use system proxy settings.

Laserjet Color MFP M276nw Cannot connect to Web Services, tried every suggestion on forum

I've tried every suggestion possible on the forum. I opened up all ports suggested by HP support on my Belkin wireless N600 router. Changed DMZ to IP address on printer. We even directly wired ethernet to printer, still cannot connect to Web Services. Now I have to wait till April 4 for a engineer to call me back. Everything else is working fine. I can print wirelessly from my laptop & smartphone. Just cannot access Web Services, oh & firmware is up to date on printer & router. We changed DNS settings to 8.8.8.8 & 8.8.4.4.
This question was solved.
View Solution.

It sounds like you have done everything to connect the web services. Web services will not connect if you are on a guest network but if you are connected via ethernet it should be on the right band. What is the printer's IP address? Sometimes it can be too high. Is this for a company that has a proxy on the network? How far away is the printer from the router? Are there any metal shelves, wireless devices or anything else near the printer or between the printer and the router? Check that the router is on Channel 11.
--Printer Does Not Connect To Web Services--
Have you heard back from the engineer? I am anxious to know how it went. I am happy to help if they don't, otherwise keep me posted on what happens. I possibly have one more step for you.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Since I updated my IPad software to iOS 5.0.1 from 5.0, I cannot access some web sites. Hoy can I go back?

Since I updated my IPad software to iOS 5.0.1 from 5.0, I cannot access some web sites. How can I go back?

Sorry, you cannot downgrade iOS software.
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appear. Let go of the buttons and let the iPad restart. See if that fixes your problem.

Cannot print from web sites after update to FF 7.0.1

cannot print from web sites after update to FF 7.0.1
Printing from my email account (Cox) is OK
System Windows Vista

When my wife updated Firefox to version 7.0.1 she was no longer able to print items from the web such as coupons. She can print from her email (Cox) account.
She is running Vista.
When I updated to Firefox 7.0.1, I did not have a problem. I am running Vista also.
Tried using the Firefox help page but no help so far.
I did notice that on her computer in the "Plugins" for Firefox that HP Smart Web Printing is now disabled and is not compatible with Firefox 7.0.1. She had no problems until she did the update.

C310 place to set DNS address(es)? Can print wireless but cannot connect to web services.

Wireless connection setup with no problem for printing (static IPs all around with WEP). Opened port on CA firewall but not on router(?) Can print across wireless network but cannot connect to web services. Thinking that I need to enter DNS(s) but cannot find anywhere to enter them.

Hi,
Open your browser and type in the ip adress of your printer. This will bring you to an internal page of the aio. On the networking tab you shouild be able to set your dns.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

6500A-710n cannot connect to web services

I was on web services and receiving printing apps. Suddenly, my apps stopped printing. I have tried all the other solutions, resetting to default, etc and still cannot connect to web services. It asks for a proxy. I have put the google proxy 8.8.8.8 and 8.8.4.4 but these don't work. What proxy & port can I use?
thanks for your help.
Nancy
This question was solved.
View Solution.

Hi Nancy,
I'm sorry to hear that you are having problems with your print apps not printing as scheduled.
To better assist you, would you please provide some further information:
Has there been any changes to your home network (new internet provider, new router, or new network password)?
Are you able to send to print jobs to the printer's ePrint email address?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I cannot access common web site like Paypal. I get an "Untrusted Connection" screen. I have accessed Paypal in the past. This also happens with Capital One.

Just in the past week, when I try to access many web sites, including PayPal and Capital One, I get a Untrusted Connection screen and it prevents me from entering these sites.

hello ra12rick, first please make sure that the date, time & timezone are set correctly on your system. if this doesn't solve the issue (or it is already set properly), a possible solution depends on different factors:
* what is the '''error code''' shown under ''technical details'' on the error page?
in case the error code equals ''sec_error_unknown_issuer'', please attempt to add an exception on the bottom of the error page & inspect the certificate (see the screenshot attached for instructions):
* which '''issuer information''' does the certificate contain?
thank you!

I'm connected to the internet but I keep getting the message cannot connect to web services

When I Scan to Email in my Photosmart 7520 all-in-one printer, I get the message, "Unable to connect to web services. Confirm internet access and try again."

Hello @Skrafty,
Welcome to the HP forums.
I understand that you are having a problem with the scan to email feature on your Photosmart 7520.
I would like to help.
Touch the ePrint icon on your printers display.
If you get the same server connection error, Try setting a manual DNS.
The following link is to a post by happytohelp01.
It contains instructions for setting a manual DNS.
Efax 7510 still won't work after turning off/on ePrint several times
If you do not get a server connection, then I would remove Web Services and enable again.
Warning: If you remove web services the printer will lose its custom ePrint address.
This address will be lost forever. It will also wipe out any scan to email settings.
To remove Web Services, touch the ePrint icon.
Go into settings and select Remove Web Services.
You will be brought back to the printers main menu.
Touch the ePrint icon again and enable the feature.
Once you get the printers claim code (used to customise the ePrint address) you can setup scan to email again.
If you encounter any issues or have additional questions please let me know.
Also you can call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

I cannot open my web site

I get the following message when I try to open my web site which is cherrycreekwoodcrafts.com
"An error occurred while processing your request.
Reference #97.1625eb3f.1348245432.690562e"
I'm using a MacBookPro, all software in current except iWeb. When I try to update iWeb from 1.1.2 to 2.0.3 I get the following "An eligible iWeb application was not found in the location /Applications." iWeb is, infact, in my Applications folder. Are there two applications folders? Am I looking at the wrong one? FWIW, I updated to 1.1.2 just this from 1.1.1 morning with no problems.
Any ideas or suggestions would be appreciated.
Thanks in advance

What website file are you trying to open when you open your site?
You need to open your domain.sites file located under User/Library/Application Support/iWeb/domain.sites.
Sounds like you are trying to open a published site and iWeb can't do that as it has no import facility - one way process.
Also, if you hve iWeb version 1.1.2, this is iWeb 06 contained in iLife 06 and version 2 is iWeb 08 and you cannot just update like that from iWeb 06 to iWeb 08. If you want to update your iWeb from iWeb 06 to iWeb 08, then you need to purchase the boxed set of iLife 08. Better still, upgrade and purchase the iLife 09 or iLife 11 boxed set which contains the latest and last version of iWeb which is iWeb 09.
You'll have to purchase this from Amazon though, as Apple no longer sells or supports iWeb since MobileMe ceased to exist at the end of June this year.

Cannot connect to web site or get podcast

Similar Messages

Maybe you are looking for