Cannot explain missing topics?

In DOC/PDF ouput generated with 'Printed Documentation' wizard 2 topics are missing. I'm NOT using any conditional build tags here, and the topics are also included in topics dialog in 'Printed Documentation' wizard (2nd dialog in the wizard).
I have removed and re-added both topics, but this doesn't change a thing.
I only discovered this when creating a new single source layout for printed ouput from scratch, using the exact same settings as in above 'Printed Documentation' layout.
Maybe a file is corrupt or so? Any suggestions.
Best regards,
Herman

I now know why the topics were missing.
I checked the 'Output View' log and found following error:
Missing topic '!SSL!\Printed_Documentation\!doc_tmp_folder_0\Special_matters\Valuation_of_inventory_wit h_standard_cost_price_system\D._Valuation_of_inventory_with_standard_cost_price_system.htm '.
Failed to process 'D. Valuation of inventory with standard cost price system'...
After some trial and error, it turns out that the output file path is too long (my guess is that the length is limited to 256 characters) .
When updating this filepath in the layout created from scratch that worked OK, the topics also were not included.
Kind of sloppy.
Best regards,
Herman

Similar Messages

Missing Topics

I have 9 topics in a sub-folder. After I generate the
project, all of the topics appear in the output folders. 3 of the 9
topics cannot be found when I search through the RoboHelp interface
and they appear as Page Not Found for my context sensistive help.
Any suggestions?
Other clues:
None of the 9 topics are accessible through the TOC - this is
intentional by design.
I'm using RoboHelp 5.0.2.
WebHelp Pro output

Hi - thank you for your reply.
I have not noticed any difference between the files.
I did try one experiment - I created a new topic and then
copied and pasted all of the HTML code into the new topic. Not sure
why, but this fixed the problem with that single file. I'd rather
not have to do this for every missing topic....(I suspect there are
probably many more than just the 3 I found so far).

I have Photoshop 7 on a laptop with windows 8.1. When I try to open Photoshop 7 I get the error message "cannot open missing personalization information". What is this and how can I fix it?

I have Photoshop 7.0. This is on a laptop running windows 8.1. When I try to open it I get the errro message: " cannot open missing personalization information".
what is this and how can I fix it.

Run it in compatibility mode and input the credentials.
Mylenium

Missing topics in pdf-document

Hello,
I am using RH 7 and creating WebHelp. I am also trying to create a pdf-document with the same content as the WebHelp. For some reason, the contents I specify for the pdf-document are only partly included in the pdf-document.
I use the TOC from the project where I have a some books without links (all the associated topics are included in the pdf-document all right), and one book with a link - these topics are not incuded in the pdf. All topics are included in the WebHelp without any problems.
So I am wondering if there is something that could prevent a topic from being included in a pdf-document? Does anybody know? And last, but not least, does anybody know how to solve this problem? I have compared the topics that are inclucded in the pdf with the ones that aren't, but I can't see any difference.
Thanks in advance for your reply!
Regards, Hanne
P.S. I have been through Printed Output on www.grainge.org without being able to find a solution.

Hi Peter,
Thanks for your suggestions, I am afraid I have not found a solution yet. Outputting to Word gave the same problem.
The TOC in the output is in fact different from the TOC in the TOC editor in the sense that missing topics are missing from both the TOC and the "body" of the output. Sorry if I did not make that clear in my first post.
I have a feeling that I must be doing somthing wrong in the Chapter Layout part of the wizard for printed documentation. I have tried creating the books from scratch (by creating and renamingnthem) to see if that would help but it did not. My topics are not imported from Word; they have, however, at some point been imported as htm-files from another project as far as I remember.
The real mystery about it is that my pdf output worked all right in an earlier version of the project. My current project is a copy of that project. I am not aware of having changed anything in the pdf settings, and they look exactly the same (I have compared the settings field by field).
Do you have any suggestions for a way of "resetting" all pdf settings, or should I perhaps try to import the .hhc file from my previous project where they pdf is correct?
Thanks in advance!
Regards, Hanne

Missing Topics in Topics box

As you can see there is a lot of missing subtopics under the Main Menu Overview topic in the left hand Topics Box. These topics all show up in the ,.chm file. Can anyone tell me how to correct this. I can't add the missing topics to the printed doc. If they do not show up in the Topics Box.
I am using RoboHelp HTML version 7.03
Lee

Hi Lee
Sorry, the site belongs to fellow Adobe Community Expert Peter Grainge, not me.
Secondly, I think what Peter points out in the page I linked to was that the first time you create Printed Documentation and move through the dialogs, the TOC used *AT THAT TIME* determines the topics. So if you come back later after having added additional topics to the project, you need to take some special steps in order to see those topics reflected in the dialog. That was my thought as to why you weren't seeing them.
I suppose a valid test here would be to right-click the Single Source Layouts pod and create a fresh layout for Printed Documentation. If you try that, do the topics finally appear?
Additionally, do you have more than one TOC defined for the project? If so, have you ensured you pointed to the correct or desired TOC?
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Cannot locate missing media

I cannot locate missing media. When I try to locate it, and browse my computer I cannot find it

Have you deleted or renamed any directories on your computer, and you've checked the recycle bin/trash can in case they are in there ?
If it's not on your computer then do you have a backup of your library that you can copy the missing items back from, or do you have them on an iOS device to copy them from ? You can copy iTunes purchases back from a device via File > Devices > Transfer Purchases, or you might be able to redownload them via the Purchased section of your account (whether you can redownload them depends upon your country, the type of item, if they are still in the store, and if you've moved countries since buying them) - on the current version of iTunes (iTunes 12) click on your id towards the top right of the iTunes screen and then click Purchased on the popup :
For both copying back from a device and redownloading you will need to delete the entries from your iTunes library (where you are getting the 'unable to locate' message) for iTunes to allow you to do copy/redownload them.
To copy back from a device media that wasn't bought from iTunes you will need a third-party program on your computer to copy them back : Recover your iTunes library from your iPod or iOS device
Missing items : iTunes: Finding lost media and downloads - Apple Support

Illustrator cc cannot open, missing font verdana

illustrator cc cannot open, missing font verdana
I have .ttf Verdana file installed in my mac, and activated, however, illustrator cc just cannot recoginized it? anyone help?

This forum is actually about the Cloud, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/illustrator

Itunes cannot open, missing msvcr80.dll, Help??

went to go download the new itunes today and even during the download it gives me a hard time in regards to "Apple Mobile Device" but even if it goes through it givves me a error saying missing MSVCR80.DLL
CDoes anyone know a solution or has apple released anything to help?

Good morning,
I had a couple questions about your iTunes install problem.
1. What version of Windows are you running?
2. What version of iTunes did you upgrade from? i.e. what was the previous version of iTunes before you tried to install iTunes 11.1.4?
3. What are your UAC settings? (Windows control panels -> User Accounts -> Change User Account Control Settings. It should be a slider with 4 settings.)
(If you haven't noticed the other threads on this topic, other users are saying go to the Programs and Features control panel and uninstall all the Apple pieces -- iTunes, Apple Mobile Device Support, Apple Application Support -- and then run the installer again. This will not affect your library or your playlists or your music. But I'd like to understand the root cause of this.)
Toonz

Missing topics in printed documentation

I am using RoboHelp V7 and WebHelp as my Primary Layout. My project has approximately 100 topics.
The project is basically an A-Z with various topics saved into 26 folders (A-Z). The printed documentation prints perfectly except that the H1 headings for all the 'A' topics are missing from the resulting Word document.
The table of contents in the Word document is correct, with "A" listed but none of the topics are listed in the TOC. The topics appear in their correction location in the word document except the H1 headings is missing. The heading "A" appears in the correct location in the Word document.
In each topic the H1 is in the header and draws its text from the name of the topic.
All the 'A' topics were created manually and the rest 'B-Z' were imported from an Word Document. This appears to be the only difference between the topics!!
All the topics (A-Z) are connected to the same template and access the same CSS file.
On the final screen of the Print Documentation Wizard (Print Document Appearance - Pninted Documentation) I have tried connecting to different templates from the drop down list under MS Word Template. I have also created my own *.dot file out of a resulting document (i.e. stripping all the text and saving as *.dot). But no luck.
Any thoughts?
Many thanks in anticipation.

The HMTL for the two types of pages looks identical
An 'A' page
<div placeholder id=header style="width: 100%; position: relative;">
<h1><variable name=title x-format=default x-value="Air conditioning">Air conditioning</variable></h1>
</div>
A 'D' page
<div placeholder id=header style="width: 100%; position: relative;">
<h1><variable name=title x-format=default x-value="dress code">dress code</variable></h1>
</div>
The only obvious difference in the HTML for the two types of pages is that the pages imported from Word have the following line in their metadata:
<meta name=OriginalFile content="Orientation Guide - Draft Wording_V2.doc">
And both types of pages are clearly connected to the same style sheets.
Stumped?

Missing Topics in TOC

When I generate webhelp the TOC comes out fine. When I
generate either a word or .pdf file the first two topics/books are
missing. They are listed in the Chapter Layout. The headings are
the same as the other topics that are printing in the TOC. Any
suggestions?

Just noodling here a little . . .
1. Which heading style(s) are you using for topic titles? Are
they consistently applied for all topics, looking at the html view?
Are there any stray spaces or html code immediately before the
<begin heading> tags?
2. Are you generating print doc with the project's style
mapping dot, or some other?
3. Did you select "Maintain HTML heading levels"?
In points 2 and 3, I don't know whether these settings (or
which option) may be causing the problem; just suggesting that you
change one at a time to test print output.
Harvey

Cannot resolve "missing return statement error"

Hi,
I have a small code where the following message is received when I am trying to compile it:
61: missing return statement
^
1 error
I cannot figure out what is the source of the error. I appreciate any help in advance. Thanks
THE FULL CODE:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class BuildSquare extends JApplet
implements ActionListener {
JLabel number1Label, resultLabel;
JTextField number1Field, resultField;
public void init()
Container container = getContentPane();
container.setLayout( new FlowLayout() );
number1Label = new JLabel("Enter an integer to represent the side of square" );
container.add(number1Label);
number1Field = new JTextField( 10 );
container.add( number1Field );
number1Field.addActionListener( this );
resultLabel = new JLabel ("The final square is: ");
container.add( resultLabel );
resultField = new JTextField( 15);
resultField.setEditable( false );
container.add( resultField);
public void actionPerformed( ActionEvent e )
     int a;
String Result;
     a = Integer.parseInt(number1Field.getText());
     showStatus("Calculating...");
     Result = DisplaySquare( a );
     showStatus( "Done");
     resultField.setText( Result );
public String DisplaySquare( int a )
String output = "";
for (int row = 1; row <= a; row ++) {
for (int column = 1; column <= a; column++ ) {
output += output + "* ";
output += "\n";
return output;
}

public String DisplaySquare( int a )
   String output = "";
    for (int row = 1; row <= a; row ++)
       for (int column = 1; column <= a; column++ )
           output += output + "* ";
        } // end of "for clumn"
        output += "\n";
        return output;
    } //end of "for   row"
    //mising return...............
} //end of public String DisplaySquare
} //end of public class BuildSquare

Skin shows/ missing topic in main frame

Due to a Robo > host server incompatibility problem, the
Publish feature does not currently work. As a workaround., I'm
trying to ftp all my files from my desktop WebHelp folder to the
host server. Will this method work?
When I check the site with my browser, I see the desired
skin, nav bar, and TOC. However the "home" topic is missing from
the main frame. How do I preserve links (between TOC and pages,
start page and skin, etc.)? Also, do I have to redesignate an Index
page?
Thanks in advance for any help you can provide.

Wow, I've got the EXACT same problem with our SRM system. TWPURLSVR seems to have the URL's defined properly for our logical system. Please post back if you indeed solve the problem with help posted. Also, I wonder if there is a way to check that the URL I put in is maintained properly. I just cut and pasted the URL that gets me to bbpstart between the first set of //.../
Thanks

WinHelp to HTML Help - missed topics

I'm creating HTML Help projects using RoboHTML version X5.0.2
by importing a WinHelp project created in RoboHelp for Word version
X5.0.1 - Microsoft Word 2000, Windows XP operating system (either
via the HLP or HPJ file).
After the process is complete, certain topics are not coming
over. I thought perhaps it was due to long tables, but some topics
with long tables came over. So, I'm not sure why these particular
topics are being missed. I checked to see if there's anything
unique about these topics (such as unnecessary non-scrolling
regions, etc.) but nothing is different.
Has anyone else experienced this problem?

ellenu,
I am having the exact same issue, I'm also in the process of
creating HTML Help projects by importing a WinHelp project. When I
import my .HPJ (Winhelp project file) into RoboHelp for Word all of
the topics get loaded, and I am able to successfully re-compile
using any of the WinHelp layouts, all of the topics are included.
However, if I choose the Microsoft HTML Help layout only the first
19 topics get converted to HTML.
Also, If I try to import the .HPJ (Winhelp project file) into
RoboHelp HTML, the same problem occurs. The first 19 topics are
loaded and the rest go missing! I have even tried deleting what
would be topic 20, to see if it was an issue with that topic. No
go....
I would be most appreciative if anyone has any insight into
this issue.
Details:
Windows XP
WinHelp compiled using HCW.EXE version 4.03.0002
RoboHTML version X5.0.2 Build 801
RoboHelp for Word version X5.0.1 Build 606
Microsoft Word 2002
Deana

Cannot rename HTML topic files

Running RoboHelp 6 on XP, trying to rename the HTML topic
file names in Project Manager pane per Help. I edit name and press
Enter and the error comes up. Name cannot be changed. What
gives?

Hi robo_rob and welcome to our community
Take a look at the following link. Pay attention to snippet
number 73.
Click
here
Cheers... Rick

TX - VersaMail cannot launch - "missing localization information"

Some time ago, I'd been having problems with VersaMail resetting my TX every time I tried to launch it, but I followed the directions in Knowledge Base Article #36541 (Parts One and Two) and it solved the problem beautifully. However, after several weeks, the problem returned this morning, so I followed those same instructions again (or at least I thought I did!), but now whenever I try to launch VersaMail on my TX, I get the following "Launch Error" message:
"The application cannot be launched because it is missing localization information."
I've tried restoring the deleted files from my Desktop's Palm User folder and re-synching, but still get the error. If anybody can help me get this resolved quickly, I'd really appreciate it.
Thanks.
Post relates to: Palm TX

Thanks for the reassurance about NVBackup 1.22b9. I'll probably try to install it sometime soon when I get the time.
As to NVB's copying itself to the card, I had indeed checked the box in Preferences to have it do that; that wasn't my problem. My problem was that after backing up to the card and doing a hard reset, NVB was no longer on my TX and I couldn't figure a way to access NVB on my card to do a Restore. As a result, I used Palm Desktop to reload NVB to the TX by means of a HotSync, but when I tested my VersaMail after the HotSync it worked perfectly, so there was no need to do a Restore from the card.
My remaining question: In an event such as this, where I've done a hard reset and NVB no longer exists on the TX, but is resident on the card, is there any way I can access the NVB on the card to initiate the Restore - without having to reload NVB first - or do I have to reload NVB first by means of the Desktop, then do a HotSync, and only then do a Restore? Put another way, can the NVB on the card only be accessed when NVB is resident on the TX (which wouldn't make sense, as why then would anyone ever bother to put NVB on the card in the first place?), or can it somehow be accessed on the card even when NVB is absent on the TX, as it is after a hard reset?
In short, if there's any way to access the NVB on the card directly after a hard reset without having to first reload NVB to the TX, I'd appreciate knowing how to do it.
Thanks again for all your help.
Post relates to: Palm TX

Cannot explain missing topics?

Similar Messages

Maybe you are looking for