Cannot get Message_ID in process

Hi all
In the process
I create a Transformation to get the message_id with
the code:
<b>
java.util.Map map = container.getTransformationParameters();
String msgid = (String) map.get ( StreamTransformationConstants.MESSAGE_ID);
return msgid;
</b>
the transformation has exception on this code
<b>
but it does not work
Somebody help me
Thanks a lot
</b>
and i have checked the links on Message_ID:
Re: Message id in BPM
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
Michal'blog
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm

hi,
just do exactly per my weblog:)
>>>>Your blogs and FAQ are excellent
thanks )
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

  • Cannot get the batch processing to work in PSD CS4

    Hoping someone can help me in PSD CS4.  I took 3000 photos of parts and now the customer wants me to add a watermark.  I created a watermark in record actions where I copied and pasted the watermark from an open document into an open part photo, then reduced opacity of watermark now inside the photo to 25%, then flattened image, then saved it as JPG.  You can see the recorded actions below:
    Next, I went to batch and set everything up there:
    ...but as you'll see I keep getting that "specify the extension" but i thought i already did by adding .jpg in the field and also the recorded action was a save as jpg, so I'm not sure why it isn't working.
    One other thing - I must keep the newly watermarked image the same name as the original.  For example if the original is K-100-01.jpg then the new one must be the same.  However, if I need to add a number to it like K-100-01-0000.jpg that's fine too.
    Any help is appreciated.  Thank you.

    Hi angelofromshelter island heights,
    I'm not sure where the purchasing from iPhoto is not working but please see if there's a relevant section in this article.
    iPhoto for Mac: Troubleshooting ordering prints and projects from Apple - Apple Support
    Take care,
    Nubz

  • I have recently started syncing to iCloud on my laptop and iPad.  It starts to sync and then stops and I get the message:  you do not have permission to sync this folder.  I do what it asks but cannot get past that folder?  Help!

    I have recently started using iCloud on my laptop syncing it with my iPad.  When the syncing process starts it stops and gives me a message something like:  You do not have permission to sync this folder.  Then it wants me to unlock and gives other suggestions.  I have done them all and still cannot get the syncing process past this folder.  I is a folder in my documents.  Anyone have any solutions?

    If you think this is a bug, you can report it here:
    Apple - Mac OS X - Feedback

  • I am trying to restore my calendar from my Time Machine backup. I can get through the process, but at the end I get a message that Calendars cannot be amended as it is required by OS 10. There is no facility to authorise a change. How do I get round this

    I am trying to restore my Calendar from my Time Machine back up. I can get through the process but at the end I get a message that Calendars cannot be removed or amended as it is required by OS10, there does not appear to be any option to authorise the backup or change. How can I get round this roadblock?

    I am trying to restore my Calendar from my Time Machine back up. I can get through the process but at the end I get a message that Calendars cannot be removed or amended as it is required by OS10, there does not appear to be any option to authorise the backup or change. How can I get round this roadblock?

  • Getting Error Msg  "usdsop cannot create a new process" in Log File

    Hi All,
    I have installed r12 in my personal LapTop.
    Every thing looks fine..
    For testing purpose, I have created a Shell Script and registered concurrent program.
    While i am running this program, program is getting error out with below message.
    D:\oracle\VIS\apps\apps_st\appl\po\12.0.0\bin\TEST_CONVERT.exe
    usdsop cannot create a new process
    Cause: usdsop encountered an error creating a new process. [Reason].
    Action: Check that your system had enough resources to start a new process. Contact your system administrator to obtain more resou (RE
    Executing request completion options...
    Please help me in resolving this issue.
    Thanks
    Sandeep

    What is your OS?
    Did you complete the steps in these docs?
    How to Register a Host Concurrent Program in Applications [ID 156636.1]
    How To Create A Custom Concurrent Program With Host Method and Pass Parameters To The Shell Script [ID 266268.1]
    How Do You Run A Unix Host Script From Concurrent Managers On MS Windows Platform? [ID 412392.1]
    How To Setup A Custom Concurrent Host Program [ID 147455.1]
    Thanks,
    Hussein

  • My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct.I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

    My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

    Have you tried resetting your iPad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

  • Cannot get Membership Provider with name RoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.

    I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
    Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
    Has anyone come across this error before?

    There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
    "Cannot get Membership Provider with name CustomRoleProvider.
    ", indicating that you may have used role provider name in Membership provider text box or in web.config.
    Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
    Please refer  -
    Forms Based Authentication (FBA) in SharePoint 2013
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • Hi, i have lost my iPhone's iCloud password and i cannot get an access to it now because i have activated " Find my Phone " , and i couldn't remember neither the emil or password, please help me if there is anyway to bypass this process please!!

    Hi, i have lost my iPhone's iCloud password and i cannot get an access to it now because i have activated " Find my Phone " , and i couldn't remember neither the emil or password, please help me if there is anyway to bypass this process please!!

    Start here: https://iforgot.apple.com/password/verify/appleid

  • HT1725 I currently have 57 songs listed under downloads and all have been in the processing stage. I have already been charged but cannot get the song to finish. Any suggestions?

    I currently have 57 songs listed under downloads and all have been in the processing stage. I have already been charged but cannot get the song to finish. Any suggestions?

    Hi Little Orchard,
    Welcome to the Support Communities!
    Are you downloading to a computer or an iPhone, iPad or iPod Touch?  I would first suggest signing out of the iTunes Store and restarting your computer or device.  Then log in and look for your purchases again.  If you are still not able to access your content the article below will get you connected with the iTunes Store Support. 
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    - Judy

  • I cannot get backup assistant to work on my Cosmos 2. It keeps saying that I entered an invalid pin (but I've been entering the pin that it tells me to enter). I'm in the process of transferring phones.

    I cannot get backup assistant to work on my Cosmos 2. It keeps saying that I entered an invalid pin (but I've been entering the pin that it tells me to enter). I'm in the process of transferring phones.

    JWensley,
    Sorry to hear about the trouble with the PIN! Let's get you past that so you can complete the transfer process. Are you receiving that PIN by pressing the # key as outlined here: http://vz.to/1zINyY8 . Is this the initial backup on the old device?
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • I cannot get .arw or jpeg files from my Sony A6000 to be taken into my Lightroom 4.4 via the normal "synchronise" process.  I have updated my Pc to Adobe RAW/DNG 8.4 with no improvement.  Can you help please?

    I cannot get .arw or jpeg files from my Sony A6000 to be taken into my Lightroom 4.4 via the normal "synchronise" process.  I have updated my Pc to Adobe RAW/DNG 8.4 with no improvement.  Can you help please?

    With regards to your .arw files:
    You need to either purchase and install Lightroom 5.4 -- OR -- download and install and use the FREE Adobe DNG Converter version 8.4, did you actually launch and use the DNG Converter?
    There should be no problem importing JPG files into Lightroom from your camera, what happens when you try? Is there an error message?

  • I cannot get the updates for ipad to download. when it gets ready to process the file an error message pops up saying the software was unable to download and the network timed out. any suggestions...

    i am trying to update the software on my ipad from 4.2 to 4.3.3 but i cannot get it to download. I get an error message that says the software was unable to download because the network timed out.  I have tried to download it 7 or 8 different times and still get the same message.  I cannot restore the factory settings either.  The same thing happens.  Does anyone have any suggestions?  It did this when trying to update to 4.2.  I don't remember how we were able to get the software to update.  Thanks.

    Thank you King_Penguin!  It worked beautifully.  I had turned the firewalls off but not the antivirus.  You are great!  I am new to this apple community thing so it looks like I cannot mark your reply as "correct answers", but it was.  Thanks a ton!

  • I cannot get my time capsule to back up...each time i go through the process...i have to start all over and still get the dreaded amber blinking light

    i cannot get my mouse and wireless keyboard to work anymore....also...my bluetooth icon is not at the top of the screen like it once was...and a note says that i must have the bluetooth module installed...it was working fine two hours ago.

    So you have never actually used the airport utility.. you were almost there.
    You posted this picture.
    Screen+Shot+2013-03-15+at+13.20.55.png
    Click edit button on that page.
    Voila.. airport utility in all its manual setting glory.
    Or install a decent utility.. 5.6.
    This is not required but to my eyes.. it is much easier to understand and has more useful tool items than later versions.. which are made iOS pretty picture like.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0

  • I use a Mac, new to lightroom, I purchased the software, and now I cannot get into my develop module because it is telling me that I need to renew my membership ?  Lost !!!  lost in a dark cold cave of lightroom someone please help me !!

    I cannot get into my develop module on lightroom, it is telling me to "please renew my membershipto reactivate the develop module"  I do not understand.  I bought the software must I pay a membership as well ?  Also I do not want to use lightroom mobile and it is trying to sync my photos.  I use a MAC

    Did you purchased the Full Perpetual License from Adobe for $149.00?, if so then what has happened is that you probably downloaded the Creative Cloud trial version which has now expired.
    The license key for the perpetual version will not be accepted to activate the CC version.
    Uninstall the existing Lightroom and then download the one available from the link below. The uninstall process will not affect your Catalog, Preferences or personal files but will just remove the application. Install the new download and you license key will be accepted.
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.6
    If this is not the situation you face then provide some more details.

  • Cannot get MacPro to allow me to boot to an alternative boot disk. Can choose in control panel but will not use the disk to boot. Also won't boot using disk selected using option key

    My primary boot disk is encrypted as is a secondary boot disk (backup) but I cannot boot using any other disk. System 10.8.5, MacPro 4.1.
    All disks mount using primary boot disk. All disks check out as OK and I have repaired permissions.
    When I choose in the control panel the Mac boots but will always use my original boot disk.
    When I select the disk using the option key at startup, the boot process stalls with a grey screen and a spinning cursor.
    Thanks,
    Dave

    Still trying to figure this out. I erased the drive, did a format using disk util and then re-installed the system but I still cannot get the disk used as a startup drive. I also tried an external firewire drive and it won't allow me to boot from it either.
    I can choose it starting up with the option key but it just gives me a blue screen and the spinning cursor.
    If I select it in the startup pref pane it boots into my other startup drive only.
    DaveLon

Maybe you are looking for