Cannot print to an HP Officejet 5610 anything from PSE Version 10

Help! I'm using Adobe Photoshop Elements Version 10 and I cannot print anything either directly from it, or even anything created out of it to my HP Officejet 5610 series printer. I am not having the same issue that others have reported with the Fax Window coming up, nothing prints at all. It doesn't even go into the Print Queue. I have been discussing (on a forum) with HP and they have suggested using the Deskjet 990C driver. I tried that and still nothing happens. I can print to a Canon Pixma with no issue, it's definitely something with this printer/print driver. I tried renaming the printer to make it shorter, I have tried completely deleting and reinstalling the printer (using HP Cleanup utility), I have updated drivers, tried using the 5610 as well as the 450C and 990C.
This is happening directly out of PSE as well as anything I create and save - so making it a PDF, it won't print. Making it a JPG, it won't print. I can print PDF files not created in PSE with no issue. I can print JPGs not created by PSE with no issue.
Anyone have any other suggestions on things I can try?

Hi,
Can you try some experiments please - or tell us if you have tried them.
1) Load a new image (one that hasn't been saved before) into the editor and without saving it, try printing from the editor. It is important that PSE hasn't saved it.
2) Load any image into the editor and do a Save for Web (you may have to reduce the size) in JPG format and see if you can print that JPG either from PSE or another program.
Please let us know the results.
Brian

Similar Messages

Cannot print documents after I downgraded internet explorer from version 8 back to 7.

Hello, Due to internet problems, I recently changed my internet explorer from Beta version 8 back to version 7. Everything on my PC seems to be working fine except for printing. I cannot print to my HP officejet J5780 all in one. When I try to print an error message shows up in the print queue and it says printer offline. The printer was set as default but I wonder if something was modified in the print setup when I reverted back to an older version of Explorer. If I try to deinstall/reinstall I get an error saying I could permanently damage the printer configuration. Also if I try to check HP drivers and software on the HP website it says I need to update but fails to download the necessary files. Please advise.

first thing to check is make sure it is still a default printer
and go to properties and check for the port and make
sure it say what the port your printer that it is using
like a pareled or usb or TCP\IP connections
and if the TCP\IP check for the correct IP of the printer
and you may want to set the printer to "static"
this will keep it from changing IPs
and you may have to uninstall and reinstall
the printer
download the file manually
make sure you know where it is saved at
for IE click save not run
for Fire Fox but first go to the tool
and click option and look in the main tab
in the middle of the box click the circle
"Always ask where to save the file"
and make sure you know where you put
the download at
Message Edited by rickp400 on 12-15-2008 04:24 PM
Please provide Kudos to whom has provided answers or
good points or advice..
Aslo if the questions or issues solved please check it
"Accepted"
Thanks and you are welcome _____ Rick

Cannot Print to Fax Using OfficeJet Pro 8600

Issue: Cannot print to fax on HP OfficeJet Pro 8600
Setup: Running Mac Mavericks 10.9.4
Steps Tried So Far: Installing updated driver available on support page. No firmware update needed.
What Happens:
1) Document is open
2) Select HP 8600 (Fax) from Print Menu
3) Pop Up Box Shows:
What I'm Asking For:
Step-by-step guidance on to get computer to connect to fax. Printing is working fine, as is scanning. I am also able to fax directly from the printer iteself.
Thank you

Hello Ermagherd, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues with your print drivers. I would like to help.
Are you connected USB or wireless?
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the HP Officejet Pro 8600 series Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I recently got Windows 10, and now I cannot print to my HP Officejet 6210.

I had Windows 7 and was able to print to my HP Officeje 6210 series printer, but I upgraded to Windows 10 and I cannot print now.

Hi , Thank you for visiting the HP Support Forums! I see you have recently upgraded your Operating system to Windows 10 and now you are not able to print to your HP Officejet 6210. Please go ahead and run the HP Print and Scan Doctor > www.hp.com/go/tools-- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers. What does the PSDR find? Now take a look here: Windows 10 Upgrade Guide for HP Printers Let me know the results, I will watch for your reply.

I just upgraded to Mavericks on my Macbook Pro and now i can't print anything from Outlook version 14.4.3. any suggestions?

I just upgraded to Mavericks on my Macbook Pro (2.7 GHz Intel Core i7) and now I can't print anything from Microsoft Outlook version 14.4.3. any suggestions? I can print from Word and Excel w/o any issues.

Try a reset > OS X Mavericks: Reset the printing system

Officejet 5610 where from download solution center

officejet 5610 windows 7 (64 bits).
I had to format my harddisk.
Where from can I download the solution center in order to use the scanner of HP officejet 5610.

Hi chenchen,
Welcome to the HP Forums.
Here is the link to the HP Deskjet and Officejet Full Feature Software and Drivers. The download has the Solution Center software that you are looking for.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How do I print to my hp officejet 6500A Plus from my iPad g4

How do I print to my officejet hp6500A Plus from my iPad g4?

airprint or use the hp print app: http://www.hp.com/global/us/en/eprint/mobile_printing_apps.html

HP Q6236A Wireless Print Server and HP Officejet 5610

Has anyone really successfully installed the HP Print Server successfully? I have tried everything I can think of to get it to work and cannot. I have Vista on my desktop where the officejet is installed and I have XP on my laptop. I have a wireless network installed using a D-Link router that has been working for several years. I downloaded the latest drivers for the Officejet and ensured that they were installed on both PCs. I followed the onscreen instructions for installing the Print Server adapter and the PC adapter on both PCs (actually uninstalled and reinstalled several times.
I got the PC adapter and the printer adapter to work one time on the desktop and then could not connect again. I downloaded the updated file for the USB disconnect problem with Vista and still no luck.
Does this HP Printer Adapter really work? I have 3 friends that also would like to have this feature and all have HP computers and HP printers but we can't get support from HP. What a shame! Any suggestions??
Thank you in advance.

I’ve installed it successfully and worked fine so far. I share a printer with other computers.
My wireless access point is Linksys router and configured with WPA2 PSK AES. And the printer is C4280.
The installations were tough and easier. It depends on the client computer situation.
Did you try followings?
Step1. Configure the wireless setting for Q6236.
1. Uninstall all of existed the printer driver and the related software, for make sure.
You can do it that the printer installer run again. Then it should show uninstall option instead of the installation and chose it.
2. Install Q6236 driver with the PC adapter.
3. Do the advanced setup and setup wireless connection. Please refer the manual.
4. Confirm network connection to the Q6236 by the utility.
The utility icon where it is right bottom corner of the desktop gets green mark when the connection is successful.
Step2. Install the printer device driver.
1. Remove the PC adapter from the computer. It is not needed any more. It is only for wireless configuration for Q6236 once. After that, you can store it in the attic.
2. Disconnect the Q6236 network connection by the utility. This is important.
3. Install the printer driver by the installer.
In middle of the installation, the installer should request you the USB connection to the printer. Then connect the Q6236 network connection. Do not connect it before the request.
For another PC to share the printer with the Q6236.
Both of the PC and the printer should be online. And do not put the PC adapter on the PC.
1. Uninstall all of existed the printer driver and the related software
2. Install Q6236 driver.
In the middle of the installation, Q6236 installer should find the printer itself and chose it.
The PC and the Q6236 should be on same IP sub network.
3. Confirm the network connection to the Q6236 by the utility.
4. Do above Step2-2.
If you do not get successful, please tell me which step was problem.

Cannot print wirelessly to HP Officejet 4500

I have an HP Officejet 4500 wireless printer that I have never suceeded in getting to print wirelessly. It will connect to my wireless network fine, but when I install the device driver and go through the configuration steps on my computer it always stops with this message:
Your computer is unable to communicate with your printer at 192.168.0.21. This may be caused by firewall software. If you are using firewall software, verify that UDP port 427 is unblocked for both inbound and outbound traffic.
Your PC can not communicate with your printer at address 192.168.0.21. Check all cable connections. Check that the printer, PC and router are powered on and connected to the network.
My PC is a HP ENVY Phoenix h9-1360ea Desktop with windows 8.1 (it never worked with 8.0 either). I have connected this to my network both wirelessy and via ethernet. Neither work.
So far I have tried:
Uninstalling and reinstalling the software from the HP download centre. The file I downloaded is OJ_AIO_4500_G510n-z_Full_Win_WW_140_408. I installed this as an administrator
Disabling my Norton Internet Security smart firewall. I also added the printer to the network map.
Adding a firewall rule to my Netgear DG834GT router to allow inbound and outbound traffic on UDP port 427.
Trying out all the troubleshooting suggestions on www.hp.com/global/us/en/wireless/index.html?jumpid=ex_r11400_go_wirelessprinting
I've checked online on the various forums but so far everything has lead to a dead end.
Running out of ideas now and could use some help please.
This question was solved.
View Solution.

Based on what you just expressed, the hardware may be working. However, the software/ firmware is not functioning correctly.
Mario
I worked on behalf of HP.

Cannot Print B&W on OfficeJet 6110 using Win 7/64 bit

Using OfficeJet 6110 working fine under Win XP. Upgraded to new PC using Win7/64 bit. As instructed by HP's web site, I did not install drivers from CD, but allowed Win7 to configure its drivers. Printer is connected via USB to the PC.
Printer will only print in color. When I change properties (either global properties or specific properties via application, e.g. Word) to designate print in black and white, the printer still prints in color. This happens for all applications (word, excel, etc) and all documents.
The only way I have been able to force the printer to print in black and white is to remove the color cartridge. However, if I do this, the copier functions of the printer become disabled even if I only want a B&W copy.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796736&lc=en&dlc=en&cc=us&lang=en&product=794...

Hi,
Please clarify your meaning "reinstalled" the printer - The driver for your printer already included within Windows7, any software you may use is not intended to Windows7.
May the stuck print job being printed upon restarting the PC?
If so, i would recomment you to try and disable the USB Ports power Management. It may cause connectivity issues with the LIDIL printing language being used by your printer:
Right click on Computer.
Click Manage.
Open the Device Manager from the left pane.
Locate the Universal Serial Bus Controller category, double click to expend it.
Locate the first USB Root Hub
Double click it, then click the Power Management tab.
Clear the Allow the computer to turn off this device to save power check box.
Click OK.
Repeat steps 6 through 8 for each USB Root Hub listed in the Device Manager.
Now follow and check for any improvement.
Please let me know of any progress,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do i print on my hp officejet 6500 wireless from my ipad?

When i try to print with my ipad via airprinter I get a message "No AirPrinter Printers Found" I have a HP officejet 6500 Wireless, what do I need to do?
This question was solved.
View Solution.

Hello,
Try following the instructions here.
If that does not help, let me know and I will see what I can do.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

PAPER TRAY SUCKS. CANNOT PRINT OUT PHOTOS, TRAY ONLY ACCEPTS PAPER FROM BOTTOM TRAY. GRRRR.

My BRAND NEW (One week from delivery) no longer prints out photos. It printed out photos several times but 3 days' ago it stopped.
The paper tray is malfunctioning. Each time I try to print out a photo (remember, it's been done several times until a few days' ago) THE TRAY WILL NOT ACCEPT PAPER FROM THE TOP TRAY!!
SELECTED PHOTOS PRINT OUT ON PAPER FROM BOTTOM TRAY ONLY!! MY INK AND PAPER IS BEING WASTED AND SEVERAL OTHER POSTERS ARE EXPERIENCING THE SAME ISSUES WITH THE HP 6520!
Is one of those infamous 2-hr. long marathon phone calls to Tech Support in India the ONLY way one can sensibly have an HP issue resolved?
This is ridiculous!

Hi,
Sorry to hear you are having problems printing. What device are you using to print?
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Cannot print to psc 1210v all-in-one from users

Only the administrator login is able to print to the psc 1210v, in Windows XP MCE. When regular user tries to print to the psc 1210v, the print job appears in the printer que, but shortly just disappears.

How I resolved the issue was to change other "User" account type, temporarily to "Administrator" and updated the printer driver from within Device Manager. I also changed, within Windows Group Policy Editor (gpedit.msc), the Load/Unload Device Drivers permissions (Computer Configuration > Windows Settings > Security Settings > Local Policies > User Rights Assignment) to include "Users" group rights, in hope this will resolve this problem again in the future.
I think that, because this Group Policy setting was restricted to Administrators group that it prevented the USB printer driver from installing properly in anyone's login that is part of the Users group. So, though the HP all-in-one software was installed for all users, the USB drivers were not. I found this by clicking on the printer driver "Details" from a "Users" login, from within Device Manager, which stated that no drivers were installed or found.

In ddition to printing freeszing, now will not accept anything from the keyboard.

Earlier versions of Firefox have lost the ability to allow printing of the UPS website lables and the international labels of the USPS website.
As of this last "upgrade" Firefox has now lost the ability to have an active keyboard when on the UPS website.
In other words, Firefox has become an unacceptable browser for shipping.

Davesmom, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Print Color Issues Upgrading to CS 4 from PSE 5

I am using the trial version of CS 4 Extended and have been finding that my pictures print much darker than they appear on my monitor. When I print the same image using PS Elements 5 the image comes out as expected. I played with one image and had to increase the Brightness from 50 to 100% to get a similar print result.
I am using an Acer monitor, an Epson Stylus Photo R800 printer, and have calibrated my monitor using Eye-One Match. Are there setings I need to change in CS 4 to get the print I expect?

In addition to aBrody's sage advice, take a look at these:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html
http://discussions.apple.com/thread.jspa?messageID=5757385
http://discussions.apple.com/thread.jspa?messageID=5666369
http://discussions.apple.com/thread.jspa?messageID=5646414
Bottom line. Make a bootable backup/clone to another volume, test it to ensure that boots the machine, and works like the original. That allows you to revert to the previous good state without having to reinstall anything. For some folks (including me during beta-testing), the upgrade and A&I installations on top of a Tiger build are not removing system-level components or updating their permissions, appropriately. In that case, E&I, followed by migrating, seems to fix things. If the upgrade or A&I install hosed things up, do the E&I thing, and then file a bug report with Apple.
Join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report WRT to installation problems.

Cannot print to an HP Officejet 5610 anything from PSE Version 10

Similar Messages

Maybe you are looking for