Cannot publish app via GUI but can via Powershell

Hi
I'm currently looking at an environment whereby applications can be published as a RemoteAPP via the New-RDRemoteApp command but when using the gui i'm confronted with the following:
And within the RdmsUI-trace.log
No firewalls between the servers, WMI running.
Any suggestions or pointers would be great.
Thanks

Hi,
Have you try to restart the server and check the result?
Is there any other RemoteApp working?
Do you have this environment under Microsoft Azure?
From the error description it seems the RDSH server is not getting recognized properly as might there is no proper connection. Please check whether you can find the respective server as added in GUI mode. Can you see the server under collections?
Do you face this issue on Server 2012 R2, if yes then found one related thread causing the issue. You can refer the last answer by “Adam” and see whether it can resolve your case.
Server 2012 cannot publish remote app programs
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Macbook can't connect via L2TP but can via PPTP. iPhone can connect to both

So I've been banging my head up against the wall for the better part of this morning trying to figure this out. Just as a note, I'm 3000 miles from my house and server, but I do have access to it for the time being via PPTP.
Before I left, I verified that I could connect with L2TP on my iphone's 3G network. I was also able to connect at the airport on my Macbook using L2TP. Sometime overnight something changed, and I can't figure out what. I noticed that my phone dropped it's VPN connection saying something like "the connection to the server dropped unexpectedly" or such. After that, I was unable to connect over L2TP on my macbook or iphone. On a whim I tried connecting over PPTP which worked! But only on my macbook. Again on a whim I tried to connect via L2TP on my iphone, and it worked?! I rinsed, lathered and repeated that process over and over again and confirmed that I could only connect over L2TP on my iPhone after connecting on my macbook over PPTP. Also, on my iphone, if I stored the password it wouldn't authenticate (probably not related).
As of this moment I am connected using L2TP on my iphone for the last hour, using it to successfully stream Pandora across US borders, but can't sustain a PPTP connection on my macbook for longer than 10 mins. And I still can't connect over L2TP. So that said here are the client and server logs (ips, domains and usernames masked....) Server and clients are in different timezones:
*Macbook when trying to connect via L2TP:*
Mon Dec 21 12:30:32 2009 : L2TP connecting to server 'nnn.nnn.nnn' (xxx.xxx.xxx.xxx)...
Mon Dec 21 12:30:32 2009 : IPSec connection started
Mon Dec 21 12:30:32 2009 : IPSec phase 1 client started
Mon Dec 21 12:30:42 2009 : IPSec connection failed
*Server Log for the above transaction:*
NO RECORD
*Macbook when trying to connect via PPTP:*
Mon Dec 21 12:49:44 2009 : PPTP connecting to server 'nnn.nnn.nnn' (xxx.xxx.xxx.xxx)...
Mon Dec 21 12:49:44 2009 : PPTP connection established.
Mon Dec 21 12:49:45 2009 : Using interface ppp0
Mon Dec 21 12:49:45 2009 : Connect: ppp0 <--> socket[34:17]
Mon Dec 21 12:49:48 2009 : MPPE 128-bit stateless compression enabled
Mon Dec 21 12:49:49 2009 : route_interface: write routing socket failed, File exists. (address xxx.xxx.xxx.0, mask 255.255.255.0, interface ppp0, host 0).
Mon Dec 21 12:49:49 2009 : local IP address xxx.xxx.xxx.233
Mon Dec 21 12:49:49 2009 : remote IP address xxx.xxx.xxx.109
Mon Dec 21 12:49:49 2009 : primary DNS address xxx.xxx.xxx.109
Mon Dec 21 12:49:49 2009 : secondary DNS address xxx.xxx.xxx.109
Mon Dec 21 12:49:49 2009 : pptpwaitinput: Address added. previous interface setting (name: en1, address: xxx.xxx.xxx.6), current interface setting (name: ppp0, family: PPP, address: xxx.xxx.xxx.233, subnet: 255.255.255.0, destination: xxx.xxx.xxx.109).
*Server Log for the above transaction:*
2009-12-21 09:49:44 PST Incoming call... Address given to client = xxx.xxx.xxx.233
Mon Dec 21 09:49:44 2009 : Directory Services Authentication plugin initialized
Mon Dec 21 09:49:44 2009 : Directory Services Authorization plugin initialized
Mon Dec 21 09:49:44 2009 : PPTP incoming call in progress from 'xxx.xxx.xxx.xxx'…
Mon Dec 21 09:49:44 2009 : PPTP connection established.
Mon Dec 21 09:49:44 2009 : using link 1
Mon Dec 21 09:49:44 2009 : Using interface ppp1
Mon Dec 21 09:49:44 2009 : Connect: ppp1 <--> socket[34:17]
Mon Dec 21 09:49:44 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x206a2bb5> <pcomp> <accomp>]
Mon Dec 21 09:49:45 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4b8d229c> <pcomp> <accomp>]
Mon Dec 21 09:49:45 2009 : lcp_reqci: returning CONFACK.
Mon Dec 21 09:49:45 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4b8d229c> <pcomp> <accomp>]
Mon Dec 21 09:49:47 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x206a2bb5> <pcomp> <accomp>]
Mon Dec 21 09:49:48 2009 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x206a2bb5> <pcomp> <accomp>]
Mon Dec 21 09:49:48 2009 : sent [LCP EchoReq id=0x0 magic=0x206a2bb5]
Mon Dec 21 09:49:48 2009 : sent [CHAP Challenge id=0x7f <3b77645a35056d6f176a3d4302524136>, name = "OSXServer.kimnet"]
Mon Dec 21 09:49:48 2009 : rcvd [LCP EchoReq id=0x0 magic=0x4b8d229c]
Mon Dec 21 09:49:48 2009 : sent [LCP EchoRep id=0x0 magic=0x206a2bb5]
Mon Dec 21 09:49:48 2009 : rcvd [LCP EchoRep id=0x0 magic=0x4b8d229c]
Mon Dec 21 09:49:48 2009 : rcvd [CHAP Response id=0x7f <51f69894a74fc550cf12b270ceb43da90000000000000000d7a8e304c6080e5d0315a47e9783a4 8ce2ae8fdb00671adc00>, name = "nnnnnnnn"]
Mon Dec 21 09:49:48 2009 : sent [CHAP Success id=0x7f "S=09A448E00B717E032D200EAEFA793E57AF9B9676 M=Access granted"]
Mon Dec 21 09:49:48 2009 : CHAP peer authentication succeeded for nnnnnnnn
Mon Dec 21 09:49:48 2009 : DSAccessControl plugin: User 'nnnnnnnn' authorized for access
Mon Dec 21 09:49:48 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : rcvd [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : MPPE 128-bit stateless compression enabled
Mon Dec 21 09:49:48 2009 : sent [IPCP ConfReq id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:49:48 2009 : sent [ACSCP ConfReq id=0x1]
Mon Dec 21 09:49:49 2009 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Mon Dec 21 09:49:49 2009 : ipcp: returning Configure-NAK
Mon Dec 21 09:49:49 2009 : sent [IPCP ConfNak id=0x1 <addr xxx.xxx.xxx.233> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::0217:f2ff:fec8:ef86>]
Mon Dec 21 09:49:49 2009 : Unsupported protocol 0x8057 received
Mon Dec 21 09:49:49 2009 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 17 f2 ff fe c8 ef 86]
Mon Dec 21 09:49:49 2009 : rcvd [IPCP ConfAck id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
Mon Dec 21 09:49:49 2009 : rcvd [IPCP ConfReq id=0x2 <addr xxx.xxx.xxx.233> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : ipcp: returning Configure-ACK
Mon Dec 21 09:49:49 2009 : sent [IPCP ConfAck id=0x2 <addr xxx.xxx.xxx.233> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : ipcp: up
Mon Dec 21 09:49:49 2009 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp1, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.233).
Mon Dec 21 09:49:49 2009 : found interface en0 for proxy arp
Mon Dec 21 09:49:49 2009 : local IP address xxx.xxx.xxx.109
Mon Dec 21 09:49:49 2009 : remote IP address xxx.xxx.xxx.233
Mon Dec 21 09:49:49 2009 : pptpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp1, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.233).
Mon Dec 21 09:49:49 2009 : rcvd [IP data <src addr xxx.xxx.xxx.233> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
Mon Dec 21 09:49:49 2009 : sent [IP data <src addr xxx.xxx.xxx.109> <dst addr xxx.xxx.xxx.233> <BOOTP Reply> <type ACK> <server id 0xc0a8016d> <domain name "nnn.nnn.nnn">]
*Server Log for iPhone L2TP login:*
2009-12-21 09:52:38 PST Incoming call... Address given to client = xxx.xxx.xxx.202
Mon Dec 21 09:52:38 2009 : Directory Services Authentication plugin initialized
Mon Dec 21 09:52:38 2009 : Directory Services Authorization plugin initialized
Mon Dec 21 09:52:38 2009 : L2TP incoming call in progress from 'xxx.xxx.xxx.xxx'...
Mon Dec 21 09:52:38 2009 : L2TP received SCCRQ
Mon Dec 21 09:52:38 2009 : L2TP sent SCCRP
Mon Dec 21 09:52:38 2009 : L2TP received SCCCN
Mon Dec 21 09:52:38 2009 : L2TP received ICRQ
Mon Dec 21 09:52:38 2009 : L2TP sent ICRP
Mon Dec 21 09:52:38 2009 : L2TP received ICCN
Mon Dec 21 09:52:38 2009 : L2TP connection established.
Mon Dec 21 09:52:38 2009 : using link 0
Mon Dec 21 09:52:38 2009 : Using interface ppp0
Mon Dec 21 09:52:38 2009 : Connect: ppp0 <--> socket[34:18]
Mon Dec 21 09:52:38 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x6b3541df> <pcomp> <accomp>]
Mon Dec 21 09:52:38 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x24ff54dc> <pcomp> <accomp>]
Mon Dec 21 09:52:38 2009 : lcp_reqci: returning CONFACK.
Mon Dec 21 09:52:38 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x24ff54dc> <pcomp> <accomp>]
Mon Dec 21 09:52:39 2009 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x6b3541df> <pcomp> <accomp>]
Mon Dec 21 09:52:39 2009 : sent [LCP EchoReq id=0x0 magic=0x6b3541df]
Mon Dec 21 09:52:39 2009 : sent [CHAP Challenge id=0x6d <4322331b3d22406914173d5e0d176c29>, name = "nnn.nnn.nnn"]
Mon Dec 21 09:52:39 2009 : rcvd [LCP EchoReq id=0x0 magic=0x24ff54dc]
Mon Dec 21 09:52:39 2009 : sent [LCP EchoRep id=0x0 magic=0x6b3541df]
Mon Dec 21 09:52:39 2009 : rcvd [LCP EchoRep id=0x0 magic=0x24ff54dc]
Mon Dec 21 09:52:39 2009 : rcvd [CHAP Response id=0x6d <f46ecd855c624eef611f02096c87d7650000000000000000f7430743bc328cbca68540408d0103 2e0a60fb95fcc2b83600>, name = "xxxxxxx"]
Mon Dec 21 09:52:39 2009 : sent [CHAP Success id=0x6d "S=0A046B9F1C59085076A8F2B736929E19391BDC4B M=Access granted"]
Mon Dec 21 09:52:39 2009 : CHAP peer authentication succeeded for xxxxxxx
Mon Dec 21 09:52:39 2009 : DSAccessControl plugin: User 'xxxxxx' authorized for access
Mon Dec 21 09:52:39 2009 : sent [IPCP ConfReq id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:52:39 2009 : sent [ACSCP ConfReq id=0x1]
Mon Dec 21 09:52:40 2009 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Mon Dec 21 09:52:40 2009 : ipcp: returning Configure-NAK
Mon Dec 21 09:52:40 2009 : sent [IPCP ConfNak id=0x1 <addr xxx.xxx.xxx.202> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::8948:cf2a:8334:7077>]
Mon Dec 21 09:52:40 2009 : Unsupported protocol 0x8057 received
Mon Dec 21 09:52:40 2009 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 89 48 cf 2a 83 34 70 77]
Mon Dec 21 09:52:40 2009 : rcvd [IPCP ConfAck id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
Mon Dec 21 09:52:40 2009 : rcvd [IPCP ConfReq id=0x2 <addr xxx.xxx.xxx.202> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : ipcp: returning Configure-ACK
Mon Dec 21 09:52:40 2009 : sent [IPCP ConfAck id=0x2 <addr xxx.xxx.xxx.202> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : ipcp: up
Mon Dec 21 09:52:40 2009 : pptpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp0, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.202).
Mon Dec 21 09:52:40 2009 : found interface en0 for proxy arp
Mon Dec 21 09:52:40 2009 : local IP address xxx.xxx.xxx.109
Mon Dec 21 09:52:40 2009 : remote IP address xxx.xxx.xxx.202
Mon Dec 21 09:52:40 2009 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp0, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.202).

I'm having similar issues but not much luck getting any answers. I made a similar post here - maybe something in there will help you.
One thing I have been able to pinpoint is that the MobileMe Back To My Mac service was causing quite a few issues with being able to connect to the VPN. Once I turn off the service, connection seems to work fine. Although, once I'm connected, I cannot access file sharing. Still waiting for some answers on that.

Cannot connect via c# but can via server management studio

When I try to connect to my sql server 2005, from a asp.net web application (asp.net development server) using...
Database=Prism_Project_db; Server=(local); Integrated Security=SSPI; MultipleActiveResultSets=True
... as the connection string, i get:
Cannot open database "Prism_Project_db" requested by the login. The login failed.
Login failed for user 'R-LAPTOP\Ryan Holdren'.Yet I can connect using sql server management studio, no problem:
Server Type: Database Engine
Server: R-Laptop
Authentication: Windows Authentication
which connects as "R-LAPTOP\Ryan Holdren".
I do not understand how the login could work for one application and not for another. Can anyone help me get this working?
Ryan

Qest,
Is this still an issue?
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Can't connect to Internet via Airport but CAN via Ethernet

Yeah so I have tried TWO different of my AX's and can not connect to the internet via EITHER even though Network Status says "you are connected to the internet via Airport". But, if I hook the ethernet cable directly to the computer from the modem it connects to the internet fine. What am I missing. Oh yeah, and on one of the AX's the "music" tab does not appear next to the "WDS" tab thus not allowing AirTunes on that AX, any ideas on that too? PLEASE HELP!!

CONNECTED!! After resetting the modem, llike you suggested, I am able to get the wireless network back up and running, BUT...I am still having problems with one base station not showing the "music" tab and thus not letting me stream music to it. When I hit "configure" the tab shows for a quick second then disappears. Any idea?

Can't SaveAs to My Favorites via IIS, but can via Tomcat

We've got BOE XI 3.1 installed on Windows Server 2003 SP2, with both IIS and Tomcat instances.
When a non-Admin user uses InfoView via IIS to view a report on a public folder that they don't have rights to save to, they can't save the report to their My Favorites folder. The same user can view and then save the same report to a public folder that they do have rights to save to, can copy and paste the same report to the My Favorites folder, and can view and then save the same report from the same folder to My Favorites using InfoView via Tomcat. The default Administrator can save to My Favorites on either web server.
One other curious detail is that when the user can't save to My Favorites, in the saveas dialog they don't see the default ~Webintelligence folder or any other sub-folders under My Favorites even tho they see them in the Documents List view.
Here's the pop-up error:
Save <-- pop-up window title
Internal Error: the value of parameter folderId is invalid. (Error: INF )
Does anyone have any ideas about the cause and resolution?
Thanks,
Bill Fuchs

Eugene,
I opened a case with BO and the support rep believes it is a bug in the .NET version of InfoView. He has opened a ticket with the technical team who are still investigating and haven't gotten back to me yet. If you open another case it might help to get the issue resolved sooner
For your reference, my case is 422057 / 2009 and the technical escalation id is 5000098788.
Regards,
Bill

We have an ipod touch, 3rd generation, 8GB. we lost the unlock code. we now try recovery via itunes, but can't connect to the ipod software update server. any suggestions?

We have an ipod touch, 3rd generation, 8GB. we lost the unlock code. we now try recovery via itunes, but can't connect to the ipod software update server. any suggestions?

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV

Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV. Whenever I try to put my info in it says to try later. When I test network it says network time has not been set. It has worked previously.

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

I cannot see my wifi network but can see others

i cannot see my wifi network but can see other networks
anybody knows the soln

Your wifi network is not working. Restart it. Delete your wifi settings for this network via System Preferences, Network, WiFi, Advanced. Reconfigure and try again.

Why do headings turn Chinese when I access my email via Firefox but not via Internet Explorer?

Why do headings turn Chinese when I access my email via Firefox but not via Internet Explorer?

hello, this is a displaying flaw caused the mcafee site advisor extension - please try to disable or remove that in case you have it present until there is an update by mcafee that can fix the problem.
http://service.mcafee.com/faqdocument.aspx?id=TS100162
https://community.mcafee.com/thread/76071

A website will open via wifi but not via 3G. Is this a setting on the iPad?

A website will open via wifi but not via 3G. Is this a setting on the iPad?

Probably not. How's your 3G connection? I ask because I've had issues when the 3G connection isn't strong. Same with WiFi too, actually.

I cannot log in my account but can as a guest even after removing the password

i cannot log in my account but can as a guest even after removing the password

Hi Kabiru,
Thanks for visiting Apple Support Communities.
You may want to use the steps in this article to reset your user account password:
OS X: Changing or resetting an account password
http://support.apple.com/kb/HT1274
Best,
Jeremy

TS3899 recently changed ISP, now cannot send emails on iPad but can receive them, help

recently changed ISP, now cannot send emails on iPad but can receive them

Make sure that your username and password are set in the outgoing mail servers setting.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Cannot send mails via IMAP but can receive mails

HI All
Having Exchange 2010 SP2 on standalone box on W2K8R2-std sp1
We enabled IMAP and POP3 for our user base who do not have Outlook or are facing issues with active sync.
mailbox gets configured however none of mails are sent via IMAP they remain stuck in user outbox only.
They can receive mails but can't send. we tried configuring same users on Outlook and activesync and it worked.
We were surprised with some mis-configuration at IMAP end but could't get to root of it. Any idea what could be an issue????
for imap testing we tried Zimbra 7.2.3 on windows 7 pro, Windows Mail app in windows 8.1. IMAP in windows phone 8
Have enabled IMAP and pop3 logging but couldn't interpret it.
Cheers VP

Hi vp89,
Based on my knowledge, POP3 and IMAP cannot be used to send messages.
E-mail applications that use POP3 and IMAP4 to send messages rely on the SMTP protocol to send messages.
The connector for receiving e-mail submissions from client applications that use POP3 or IMAP4 is created automatically on every Hub Transport server.
We need a Send Connector.
More details in the following articles:
Understanding POP3 and IMAP4
http://technet.microsoft.com/en-us/library/bb124107(v=exchg.141).aspx
Create an SMTP Send Connector
http://technet.microsoft.com/en-us/library/aa997285(v=exchg.141).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Suddenly on my iPad I cannot access web links via emails but can on my iphone

Suddenly I Cannot access web links via emails on my iPad but can on my iPhone. Is there something in my settings I need to change?

Restart
https://www.apple.com/support/iphone/assistant/phone/#section_1

Other PC can access internet via cable but not via wireless.

Hi, I am new here. But I have a question hopefully someone can help to answer. I juts got myself signed up for one of those portable USB modem that you can use anywhere and you use a phone sim card to access the internet. I connect the usb device to my desktop computer and use a linksys wireless router to connect to other pc in the house. My problem is that the internet can be access by other pc's if I connect the other pc's via a network cable but no internet all if I connect via wireless. Any reason why it work via cable and not via WIFI? Is it the setting inside the router that is not set correctly. I pretty much left the setting on factory default except for the wireless network name. Any help to explain why this is happening is much appreciated. Thanks. Alex

Follow these steps to upgrade the firmware on the device: - Open
an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin
Click on the 'Administration' tab- Then click on
the 'Firmware Upgrade' sub tab- Here click on 'Browse' to select the
extracted/uncompressed .img or .bin file and click on "Upgrade"-Wait for few seconds ....
It shows that "Upgrade successful" After
the firmware upgrade, click on "Reboot" and you will be returned back
to the same page OR it will say "Page cannot be displayed".
Reset the router for few seconds ....
Reconfigure it ....

Cannot publish app via GUI but can via Powershell

Similar Messages

Maybe you are looking for