Capacity requirement group by week
Inside CM01, given a work center, we can get capacity requirements group by weeks.
Is there any function module to get the same answer?
I've found that table KBED seems to hold the information I need.
But don't know how to group the records into different slot of week.
Can anybody help?
Regards,
Norman.
Hi,
user588757 wrote:
Hi Frank,
Too good... it worked !!!!!!!!!!!!Thanks. If it's too good, I suppose you can always add errors.
And can we give input for END DATE...it does have only start date..Yes, you could give the end date instead of the start date.
You could allow either.
Suppose you had a form that returned user_input_date (a DATE) and a string, user_date_type, returned by a radio group, 'START' if the user indicated that the date entered was a start date, or 'END' otherwise.
WITH d AS
SELECT user_input_date - CASE
WHEN user_date_type = 'START'
THEN 0
ELSE 6
END AS input_startdate
, g AS
SELECT (creation_date - input_startdate) AS wk_num
FROM xxsirf_per_addresses_tl
CROSS JOIN d
SELECT MAX (input_startdate + (7 * wk_num)) AS wk_start
, MAX (input_startdate + (7 * wk_num) + 6) AS wk_end
, COUNT (*)
FROM g
GROUP BY wk_num
ORDER BY wk_num;Though if you were running this from a form, it would be easy to do sub-query d separately, and pass the input_startdate that it computed to the query I posted earlier.
I would discourage allowing users to input both start- and end dates, because they won't necessarily be six days apart.
Of course, you could ignore one if both were entered, but that's exactly the kind of thing that confuses end users.
Similar Messages
-
How can i use capacity reservation group
I have a set of slow moving SKU which i want to plan in a specific week every month , I know i can use PPC calendars for that but how can i use capacity reservation group in SCM 7.0 to achive this through wave heuristic
Please advise
Prasanna NBawareHi Ambrish,
PPDS capacity reservation functionality available from version SCM 5.1 onwards. for your requirement you can reserve the capacity at resource level for product.
To archive this requirement, you need to do
u2022Create Planning Object Structure (POS) with the required characteristics (Product & Location mandatory)
u2022Create a planning area assigning the planning object structure
u2022Create Characteristics Value Combination (CVC) in the POS
u2022Maintain Capacity Reservation Group (resource)
u2022In Product Master > Demand Tab> assign the consumption group
Result: . Planned order gets created for the demand based on the allocated quantity for the particular period
please let me know if you have any further question
bye
Dhaiva -
REM Planning table - Capacity requirements and Levelling.
Hi i have few queries in REM planning table.
In REM planning table MF50 my selection is based on entire plant. Here in total capacity data tab for any particular plant it will show the list of work centers which are maintained in particular plant to know the capacity details as per our requirement.
1.When i select any WC line and click on change capacity display from CRP it is giving break up with required and available capacity hours for any particular WC available time is assume 22.5 hrs per day which is given in operating time in capacity header in WC but in MF50 it is showing 23hrs.I have defined shift sequence in OP4A and assigned in capacity header grouping which have 3 shift with 30 mins break in each shift which results in 22.5 hrs working for a day so in shift sequence and operating time it is mentioned as 22.5 hrs is the time available for day but in MF50 it is showing 23 hrs available for day?
2.What is due% in MF50 total capacity data for any work center and how required time would be calculated?
Appreciate if any one has any example.
Cheers
KKHi bump for any suggestions?
i have noticed one thing the time available is a round up value actual time available as per capacity header is 22.5 but in MF50 it is showing as 23..if i change to 21.5 then it is showing 22hrs available per day is this the standard behaviour?
can anyone tell me how the required time is calculated?
Cheers
KK -
CLOSED: Resource requirements logic in weekly buckets
I have a problem with identifying resource requirements in separate weekly buckets.
Let's consider just one resource, here is an example from live application:
Bucket A: 30-07-2006 00:00:00 - 06-08-2006 23:59:59
Bucket B: 07-08-2006 00:00:00 - 13-08-2006 23:59:59
Resource availability (actual, not bucketed):
06.08.2006 22:00-00:00 (2h)
07.08.2006 00:00-00:00 (24h)
... (24h)
Resource requirement from ASCP:
Start Date: 06-08-2006 13:30:00
End Date: 07-08-2006 10:41:00
Resource hours: 15
Resource units: 1 unit
Question is how many of resource requirement hours fall in the bucket A, and how many in bucket B?
Customer needs to check resource requirement hours in each bucket for reporting purposes.
What is the logic behind? How to identify exact resource hours used in each bucket for resource requirements falling in two adjoining weekly buckets?
Thanks in advance for your help
Catalina
Message was edited by:
user447176Have a look to package MSC_CRP_HORIZONTAL_PLAN : this package computes data for resource horizontal plan. It will help you to understand how available and required capacity are computed.
We currently use this package (procedures MSC_CRP_HORIZONTAL_PLAN.query_list and MSC_CRP_HORIZONTAL_PLAN.populate_horizontal_plan) to compute data for our reports. It gives the results displayed into the workbench. -
CM02 Transaction is showing Capacity requirements in Hours
HI Guys,
I have a question in regards to CM02 transaction, Plz help me finding out what is wrong with it let me walk you through the step which I take
CM02 > Workcenter name> Plant
Click on Planning (Upper Left Corner) => Profiles > Option Profile and select SAPB023 which is Weeks (78)
Click on Standard Overview Tab (upper left Corner)
Select any one the week and hit Cap. details/Period
My problem begins here
IN Rem.proc column(Remaining capacity rqmts.for operation segment "Processing) it is showing as Minutes, however in Reqmnts (Capacity requirements) it is showing the same value as in Hour Unit with the same number for instance if the number is 30 min and Reqmnts column it shows as in hour.
Why it is showing Unit of Measure in Hours rather then Minutes and secondly, where this value is coming from.
Thanks In Advance.CM02 > Workcenter name> Plant
Click on Planning (Upper Left Corner) => Profiles > Option Profile and select SAPB023 which is Weeks (78)
Click on Standard Overview Tab (upper left Corner)
Now before you do the below step ,Go to Setting > General > Here you will geta Screen POP up for Settings: VAlue display
And here there is check box for the unit of measure for capacity
activate the check box.- and then follow the below stept. F1 details of this check box is self explanatory
and now you do the below step
Select any one the week and hit Cap. details/Period
Kinldy let me know the feedback'
reg
dsk -
Rough -cut plan with capacity requirment calculation
Hi all,
We checking SOP with rough-cut plan
We created Rough-cut profile in mc35 for our bottle neck work center with base quantity -1 and time span - 1
then we selected new work center (there is no existing cap req). and assigned base unit measure:min.
and we assigned 1min for each day and saved the profile.
Now we went to mc88 and checked the material's active version production plan. (period split- DAY)
in View -> capacity situation -> rough cut planning -> show.
System calculates some capacity requirement for our production plan.
Say for tomorrow's date i given 1000 qty - production plan.
but system showing capacity req
Work center: TESTWC3 Plant: 0001 Capacity: 001
Info structur Material Plant Order qty Unit From To Capacity reqmts Unit
S076 TESTFERT14 0001 1000.000 EA 29.01.2010 11.02.2010 9000.000 MIN
with 9000min and cap load more than 652% ( Actuallly it has to show 1000min as per rough cut plan profile)
Our available capacity of work center per day - 1380 min
We cant understand the capacity requirement calculation in MC88..
Help us out...
Thanks in advanceHi,
Rough cut planning is genrally done for the group of material say product group, group of workcentre rather than individual material or workcentre.
As standard, in resource table whatever the value you enter that corresponds to no. of days. Each column represents one day.
Pl. refer this link for clear understanding of the same.
http://help.sap.com/saphelp_47x200/helpdata/en/a5/63212e43a211d189410000e829fbbd/frameset.htm
Madhava -
Planned Order Capacity Requirement CM29
Hi All
This may be a trivial question for you guys, but I am couldnt find the problem, need your help again please:
In CM29 my planned order and process orders are visible, and I am using the standard overall profile: SAPSFCG013.
Earlier I use to see a continous red bar for length of the planned order / process order in the graph, but somehow now it just show up as a single line, irrespective of the order quantity.
Can you please let me know how to resolve this!
Thanks in advance!
-RahulHi Vivek
Here is the link for attached screen shot for CM29 with weekly and daily split:
CM29 with weekly split:
[CM29 Screenshot|https://picasaweb.google.com/110467857304221340164/CM29?authkey=Gv1sRgCNLYw_uHj8-lUA#5626401198199374018]
CM29 with daily split:
[DailySplit|https://picasaweb.google.com/110467857304221340164/Jul72011?authkey=Gv1sRgCLKtzPPn5_SARQ#5626402521518801586]
I have trie changing hte qty to 1000 and more, the capacity (detailed capacity and roughcut capacity requirement) changes as expected but the graph does not moves
Thanks in advance
Rahul -
Planned capacity Requirement of Past
Dear Experts
I Have selected the profile and displayed the report through CM02 for the past capacity planning Requiremnt.But the problem with report is that it is only showing the capacity of Released order and order status with TECO is not displaying in the report.Please guide me to get the same by selecting the suitable profile.
Actually i want to see the how much was the capacity planned in last month or week.Please tell me some suitable report to get the required output.
Thanks in advance for your valuable help.
AR
Edited by: Amit Rana on Aug 26, 2009 12:45 PM
Edited by: Amit Rana on Aug 26, 2009 12:53 PMHi Experts,
i Want to see the Planned capacity for workcentre.I mean to say what was the actual planned capacity of workcenter last week or Month.The system is only displaying order which is having released status system is not considering order status with TECO.This ineed to analyse my capacity requrement for this year Plan vs Actuall.
Please guide me
AR
Edited by: Amit Rana on Aug 26, 2009 2:52 PM -
How to calculate the Remaining capacity requirement in SAP Production Planning?
Hi SAP Guru's,
I would like to make report on Work center capacity with Remaining capacity requirement, available Capacity and Remaining available capacity requirements.
Can please let me know the Transparent tables for below Fields?
BEDAKT: Capacity Consumption Rest
OUTPUTLEN: Capacity Consumption Offer
SLIBELAS: Capacity load and
SLIDELTA: Capacity Unused.
Could you please help me accordingly
Regards
BhupalWrong space. Please move this to BW area.
-
Function Module to get a work center's capacity requirements (load) within a given period
Hi all experts,
Currently I’m doing a capacity summary report similar to CM01, but with a summarized capacity availability and loading for a period.
Selection Parameters: Work center range from and to, Period from and to
List Format: Work Center, Avail Capacity, Loaded Capacity, Free Capacity, Load %
I have found a standard function module (FM) to get work center's available capacity for a period, but still facing the challenge to find a FM to get a work center’s capacity requirements (load) in a period.
I have read through all the related threads from the web, and tested the recommended FMs, but still cannot get a right result.
Please help to provide some leads for a FM or the logic.
Best Regards
PhilipHello Philip
The following function modules should be useful:
- CY_PRIMARY_SELECTION - Function module for selection of orders for the work center
- CY_SECONDARY_SELECTION - Check for additional criteria
- CR_CAPACITY_AVAILABLE_PERIODS - Reads the available capacity from work center
- HR_PERSON_READ_TIME_INFO - Reads the available capacity from person (modification)
- CY_GET_PART_CAPACITY - used only for the first period to read backlog
- CY_LOAD_DISTRIBUTION - Distribution key
Please observe that these are simple function modules, not BAPIs, That means, they were developed to be used on the SAP internal programs and they are not supported by SAP when used in custom programs.
BR
Caetano -
Group by week between date range
Hi,
i'm having a table for documents. The documents are received from diffeent dates. I've to calculate number of documents received on weekly basis.
I need an sql to count the number of documents between two given dates grouping by weekly.
My week starts on Sunday and ends with Saturday.
I've tried group by with to_char(documentdate,'IW') , but this will take Monday to Sunday as a week & the incomlete weeks i'm not able to calculate. ie : in the below output the date range 1/28/2007 - 1/31/2007 is not a complete week . ( ie saturday to wednesday)
I need out put should be like this for Date Range: 12/31/2006 to 1/31/2007
week count of documents
12/31/2006 - 1/6/2007 10
1/7/2007 - 1/13/2007 40
1/14/2007 - 1/20/2007 30
1/21/2007 - 1/27/2007 20
1/28/2007 - 1/31/2007 10
Please help me to get this.....
(columns in documents table is documentid and documentdate)your're very close with IW. you just need to shift the data to get it to fall within the correct range. btw, you don't need julian dates. it's overkill
trunc(date+1,'IW') will push the date into the correct week range (IW will put sunday one week earlier than you want, so push it ahead a day before truncating).
then subtract 1 day from the result to get it to display with sunday's date instead of monday
trunc(mydate+1, 'IW')-1
and the week end date is simply trunc(mydate+1, 'IW')_5
select mydate, to_char(mydate,'Dy') dy,
trunc(mydate+1,'IW')-1 wk_Start,
trunc(mydate+1,'IW')+5 wk_end
from (select sysdate-rownum mydate from dual connect by level < 20)
order by 1 -
In Material Master Screen,functionally what is Requirement Group in the MRP
In Material Master Screen,functionally what is Requirement Group in the MRP Screen.Pls explain its functionality
Hi,
The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
Prerequisites
· You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
· In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
· If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
Regards,
Vijay -
Function module to calculate capacity requirements of production order
HI
Hav a requirement to calculate capacity requirement for production orders like we see in cm50... does anyone know a function module to calculate capacity requirement?Hi All,
Just to reopen this issue, even I am looking for a similar functionality.
To reinstate the requirement:
I want to find shifts and corresponding capacities for a work center. These details are obtained from CR03 and CR13 transaction.
If possible do let me know Function module or tables for the same.
Debs -
Hi,
I have a query in sql
Table employees
columns : empid,hiredate,job_id,salary
I want to count(empid) and group data weekly with job_id , order by month.
Sample of Data like :
mon week job_id count(empid)
jan week1 sa_rep 15
jan week2 sa_rep 20
jan week3 sa_rep 35
jan week4 sa_rep 40
feb week1 sa_rep 10
feb week2 sa_rep 05
feb week3 sa_rep 12
feb week4 sa_rep 15
Help please
Thanks and Regards,
Ramesh J Cyou can
group by to_char(hiredate, 'IW'), --week of year
to_char(hiredate, 'Month')and
order by to_char(hiredate, 'Month') -
Project MRP - Requirement Grouping in PR
Dear Experts,
Please note that I am attaching two finished goods (Material Type - FERT) in the project through network activity, on two different activity. The delivery time for the two items are different. Requirement date is one month different for the two finished goods.
Requirement Grouping is done through automatic grouping.
Now when I am running MRP system generates seperate planned order for two finished goods for the same raw material as the requirement date is different. If I am keeping the requirement date is same even though it is planned on different network activity system is making only one planned order for the total number of raw material required.
Just one doubt..
Is there any work around to club the requirements of raw material for two finished goods, whose requirement date is different, in one planned order / purchase requisition.
Thanking you.
Best Regards,
Abdul.The post has been moved to SCM - PP
Re: MRP - Requirement Grouping in PR - Project Stock
Tnx.
Abdul.
Maybe you are looking for
-
Getting an error in Firefox when passing an apostrophe in the URL
When I click on a button it is passing an apostrophe in the URL and redirecting to another page but got "Oops! We are sorry, there was integrity check error with your request. Please contact support" error in the Firefox browser. And the same URL is
-
Revision: 1590 Author: [email protected] Date: 2008-05-07 08:49:22 -0700 (Wed, 07 May 2008) Log Message: Updating WebService RPC tests that previously used external endpoints at whitemesa.net to now use internal endpoints accessed through Tomcat serv
-
GRE/LE error(very urgent)
Hi, I have a problem, when assigning the organisation and payroll to assignment shows an error. appp-pay-34024: must be enter the legal employer. (version 11.5.10.2) Even i have finshed the GRE/LE in the BG level and in the income tax information i d
-
Has anyone had a problem connecting to Edge network?
Got my phone yesterday and it worked flawlessly. I drained the battery and charged it over night. So I wake up today and try to see what the weather is going to be. It says error updating, so Im like w t f? So I try to open a webpage(using edge) and
-
错误提示为: Database Connector Error: "BAPI Error #:0 Error occurred when starting the parser: timeout during allocate / CPIC-CALL" 软件版本: Crystal Reports 2008 sp2 SAP IK 3.1 在SAP NOTES 1369523中找到了相同的症状描述, 但提供的解决方案太笼统了. 顺便提一下, BW系统的结构是 数据库 与 应