Captivate 6 not picking up NeoSpeech voices

I followed the instrctions to download Neospeech voices and performed the install and it reported success but Captivate only shows Microsoft Anna.
I can see voices Bridget, Chloe, Julie, Kate and Paul are in folder C:\Program Files (x86)\Adobe\Adobe Captivate 6 (32 Bit)\VT so how do I get Captivate to link them?
Thanks

Hi Vikram,
Thanks for this and yes that worked.
Thanks,
Jim
Date: Thu, 20 Sep 2012 08:10:28 -0600
From: [email protected]
To: [email protected]
Subject: Captivate 6 not picking up NeoSpeech voices
    Re: Captivate 6 not picking up NeoSpeech voices
    created by VikramGaur in Adobe Captivate - View the full discussion
Hello, Welcome to Adobe Forums. As per you notes, it seems you have Windows 7 If you don't have any specfiic settings or Configuration for you projects, then follow these steps : 1) Close Adobe Captivate 62) Go to this location : C:\Users\user_name\AppData\Local\Adobe3) Rename "Captivate 6.0" folder to "1234"4) Launch Adobe Captivate 6 and check do you see all the voices under Speech Management. Thanks,Vikram
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4713452#4713452
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4713452#4713452
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4713452#4713452. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Captivate by email or at Adobe Community
  For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

  • Skype 7.0 is not picking up my voice after a black...

    So basically what happened was I was skyping with my friend fine and suddenly PC got shut off due to a blackout. After a restart, my Skype (7.0) won't pick up my voice anymore. Only Skype won't pick up my voice. Steam, GTalk, Windows Setting all can pick up my voice. Tried to switch to front audiojack panel and it seems to work fine but quality is kinda bad (Skype 7.0 is not picking up my voice if my mic is plugged into the rear audiojack panel).
    Things I've tried:
    Reinstalling audio driver
    Reset Skype settings
    Clean reinstallation of Skype (Using Revo Uninstaller to uninstall)
    Reinstalled Windows (Full Format) 
    I'm currently using Skype 6.14 which apparently is able to pick up my voice. Adviced needed :/

    Please,  run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Captivate 8 not picking up System Audio

    Good morning,
    My partner and I are both using Captivate 8.  We are trying to use a Lync meeting to capture audio.  It works fine on my computer but not on my partners.  It seems all her settings are the same as mine.  She used to be able to pick up the system audio but it has stopped working for some reason.  I have had her re-boot twice.  Anything else we should be checking?

    Hi Lasers Edge,
    It turned out that the problem was not actually in Captivate but in Lync.  The Lync setting default was not using the Logitech Headset but something else that Captivate did not pick up as part of system audio.  Had to click on the Speaker icon in my tray at the bottom of my window (application agnostic).  Then click on Mixer.  There are then choices for Speakers, System Audio, Lync, etc....  Only Speakers has a drop-down arrow.  Select your headset instead of the HP or Realtech or what ever is there.  This should fix the problem.
    PS -- For us, why it was working for several weeks and then stopped turned out to be a Blue Jeans Conferencing upgrade.  Each member of the team had the issue on different days over a two week span and it turned out to be the same day we updated Blue Jeans.  Hope that helps. 

  • TS4079 Siri is not picking up my voice and Siri is not talking back after ios7 upgrade. .?

    I have tried to use Siri after upgrading to ios7 and now the ring just spins with suggestions of what to ask , but Siri does not pick up my voice and Siri does not speak back.
    I have internet connection , I have done a phone reset etc etc , it was working fine before the upgrade , any ideas please.?
    Also have the language set to uk english ..
    Upgrade to iPad 4 worked fine , just the phone. (Iphone5)

    ok, got the same problem! here is what i tried and found out:
    ok, now i tried again a factory reset and it didn't help...
    Also tried a reset with restoring from an icloud backup! Didn't help...
    Switching Siri off an on, didn't help
    Switching off Siri and reseting the iPhone (holding down the power- and the homebutton till Apple logo) and then switching back on, didn't help...
    Using Siri with the headset, working!
    Using raise to speak option working also! So only the Homebutton activation does not work!
    Called the support, the answer is: Buy a 35 € protection plan or help yourself...

  • Mic not picking up my voice

    So my issue is that whenever I am on Skype, the person on the other end can hear all of my laptop's sounds (e.g. music, videos, etc) and doesn't pick up my voice or external sounds at all. Does anyone know how to fix this issue? Thank you!

    Hi,
    I would suggest some further simple tests. It could indicate to us where the root cause may come from.
    1) Have you tried to use the external audio device with another app? For instance try to record your voice with a windows recorder. it can indicate whether your external device has a driver problem or if it is a problem related with Skype.
    2) Try another external device (or your build-in mic/speaker device) with Skype. Check if the problem remains or not.
    Report the outcomes of these tests and then we will proceed.
    Good luck and thanks for reporting us this problem.
    Regards,
    Sebastien

  • How do I get my microphone to pick up my voice?

    The microphone on my 4S isn't working. It will not pick up my voice on regular calls, it will only pick it up on speakerphone. I have reset my phone. Still doesn't work. Is there someway for me to fix it or do I need to go into Apple?

    You can't.

  • Linking NeoSpeech Voices and Captivate 6...

    Hello,
      I recently installed Captivate 6 and NeoSpeech Voices 6 on my home computer. I can open and work with Captivate 6, and I get the message that the Neo Voices was also correctly installed.  Unfortunately, when I go under Speech Management, Microsoft Anna is the only voice available to me. It also says at the bottom of Speech Management that I have not downloaded and installed NeoSpeech Voices, although I have. I actually used that link to do so. 
    Do I have to do something to "link" the two programs so that the additional voices are available to me?

    Hi Vish,
    I don’t have an AppData folder after my user name. I uninstalled Captivate last night including preferences so, if possible, can you give me the installation and setup steps from scratch.
    Thank you,
    Rebecca Baraconi
    Instructional Developer
    Mobile: 510.402.3534
    rebecca.baraconi.workday (Skype)
    [email protected]
      <http://www.workday.com/signature

  • NeoSpeech Voice 6 not installing

    Can anyone help me? I've been trying to install the neospeech voices for Captivate 6, but I keep getting the error "Update Failed. Updates could not be applied. Please contact you Administrator, if you wish to apply updaes on you machine. Updates have been suppressed by the Administrator."
    This is weird since I have Aministrator rights. I right clicked on the installer an ran it in Administrator mode. Still no luck. I had our IT team log on to my machine as administrator and try to install it, still no luck. Can anyone help?
    I have Windows 7 32 bit. I am installing NeoSpeech 6 32 bit.
    Thanks

    Hi Everyone 
    Close Captivate 6
    Open the location mentioned below (Win XP)
    C:\Program Files\Common Files\Adobe\AAMUpdaterInventory\1.0
    There will be a AdobeUpdaterAdminPrefs.dat. Open this .dat file in notepad and then change the value from 1 to 0. Save
    Then run the Installer (VoiceInstaller.exe) once again. You will be good to go
    Thanks
    VJ

  • NeoSpeech voices in Captivate - need help installing

    I have recently purchased Captivate 7. I have downloaded each of the items on the downloads page and 'extracted' them as indicated by the prompts. I have tried to install the NeoSpeech voices again and again, without success. These are all the folders and files I now have:
    Adobe Captivate 7
    Adobe eLearning Assets
    Cp7_win_assets_installer
    Cp7_win64_voices_installer
    NeoSpeech Voices (64 Bit)
    Captivate_7_x64_Neo_Content_LS21.7z (and 'application' by the same file name)
    Please tell me what I need to do to to be able to use the NeoSpeech voices. At the moment, only a Microsoft voice is available in the TTS function.

    Hi doralsuncoast
    Captivate 7 works the same way. However, if you are on 64-bit system and use NeoSpeech user dictionary, you should be aware of one bug.
    When you run UserDicEng_<VoiceArtist>, it crashes with an error message. The workaround for that can be found in:
    http://forums.adobe.com/message/5651747#5651747
    To the best of my knowledge, Captivate 7 doesn't support any other voices other than NeoSpeech.
    Sreekanth

  • I am trying to create a package for Captivate 8 that includes NeoSpeech voices

    I am packaging Captivate 8 using Creative Cloud packager.  I need to add the NeoSpeech voices to the package.  I run the packager to build the package with the msi using our enterprise license which gives me the applications along with patches.  There is nothing for NeoSpeech though and I need to include NeoSpeech with the msi. 

    Hi There,
    In order to create msi package of Neo Speech Voices of Captivate 8,  you have to use Adobe Application Manager Enterprise Edition 3.1 ( AAMEE 3.1 ).
    You can download AAMEE 3.1 by visiting the link :- http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html
    Regards,
    Ajit

  • How do I install Neospeech voices for Captivate trial version?

    I tried using the link in the text to speech window, nothing happens when I click on it.

    Hi There,
    Please find the download link for Captivate 8 Neo Speech Voices :-
    http://download.macromedia.com/captivate/cp8/Captivate_8_Voices.zip  ( For 32 bit )
    http://download.macromedia.com/captivate/cp8/Captivate_8_Voices_x64.zip  ( For 64 bit )
    Save the zip file and then extract it.  Run the setup file from extracted folder and it will install Neospeech voices.
    Regards,
    Ajit

  • My speaker does not pick up sound when i video with my iphone or use the speaker,  yet the voice recorder works?

    my speaker does not pick up sound when i video with my iphone or use the speaker,  yet the voice recorder works? any ideas why? thanks

    Speakers have never picked up sound.
    Microphones record sound.

  • Installing NeoSpeech voices.  Error

    Captivate 6 -  Version 6.0.1.240.  I am unable to install NeoSpeech voices.  Error:  "Adobe Application Manager may be damaged...etc.  I have downloaded a new copy of Adobe Application Manager 7.0, but continue to get error.

    You're not trying to download NeoSpeech voices for Cp7 and install them on Cp6 are you?

  • Do I need to permission to publish with neospeech voices?

    Do I need permission to publish captivate material with the neospeech voices?  I work for an educational establishment.  The material will be published on an intranet only.  There will be no commercial gain.

    As far as I know, no problem. It is included in the CP-software. And this question has already been asked on this forum, no Adobe law specialist popped in to proclaim that you could not publish with those voices.
    Lilybiri

  • Skype Voicemail Not Picking Up

    When people call my Skype number and I am not here to answer, it just rings and rings and never goes to Voicemail.   
    I have tried a number of things - logging out, logging in, turning off voicemail, turning on voicemail, turning off call forwarding, turning on call forwarding - and it still doesn't work.
    I have temporarily solved the problem by having the number forwarded to Google Voice, which works just great.  But, the problem here is my phone (using a GE phone with DECT 6.0) won't ring when forwarded, so I am not "live" to receive calls.
    At any rate, is there is solution for voicemail not  picking up?

    Dear Readers,
    Does anyone from Skype respond to the support questions and help resolve the issues?
    Yes, we are fortunate many Skype staff participate on the Community.  That said, our Community Guidelines do remind us this Community is primarily Skype users offering assistance to other Skype users.
    I have flagged this topic for follow-up by those to whom I report.  You may also report problems with voice mail to Skype Customer Service: Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
    Here are a few extra notes to guide you along the way ...
    You will need to proceed through each step, one at a time. Sign on to the Skype website as requested. Choose the subject and topic which most closely matches the item you need assistance with. Then, continue past Step 2 of the instruction where several articles from the FAQ library will appear for you to review, and proceed to Step 3, Continue Support Request (the blue "button" appears at the lower right corner of the website page). You may also skip through Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started. When you complete the web-form and click Submit, your information is relayed to Skype and you will receive a reply via e-mail unless you are transferred to start an instant message chat session with a Customer Service agent.
    If you experience difficulty reaching Skype Customer Service, try again using a different web browser. Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also impede reaching an agent.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Maybe you are looking for

  • How to call new window and text element without changing print program

    Hi Friends,    I have requirement like this . i have a standard print prog and custom form. i want add 2 to 3 extra windows in the form and i have to print some data. but how can v do this with out changing the print program. i know that to pick new

  • BACKGROUND  SCHEDULING  based on a event

    Hi,     I need to execute my program in background ..  based on an event..for example.. here i want to execute   RBDMIDOC program  based on  when ever i change the master data ..   i created a varient in SE38.. and i enetred into SM37  and  here  wha

  • Encryption problem in message mapping

    Hi Experts, I have done a file to mail scenario, in which the file adapter picks the file from the folder, where some reports(Flat Files) getting generated. Mail adapter send an email to the receipient with the sender payload as an attachement. when

  • SAP Management Console : Error MMC cannot open the file "C:\WINDOWS\sapmmc.

    Hi Experts, We are installing the xmii system on a server, it was not installed completely. Now we have deleted the xMII folders from Add and Remove in Control Panel. After deleting these folders, when we are opening SAP Management Console, it is giv

  • Multiple PageHeader section does not get exported to ExcelRecord format

    Hi, We are using Crystal Reports for VS 2005 in the web application that we are developing.  We found that when are exporting the report to ExcelRecord, if the report has multiple PageHeader sections then only the content of the last section will get