Cast multiset help needed
I have the following sql
SELECT *
FROM (SELECT updatedby, updateddate, ROWNUM,
ent_id
FROM (SELECT hstbe.updatedby,
hstbe.updateddate,
TO_CHAR
(hstbe.entry_id
) ent_id
FROM hst_rb_booking_entry hstbe
--WHERE hstbe.entry_id = entryid
UNION
SELECT hstli.updatedby,
hstli.updateddate,
hstli.entry_id ent_id
FROM hst_rb_line_item hstli)
-- WHERE hstli.entry_id = be.booking_entry_id)
ORDER BY updateddate)
WHERE ROWNUM < 6)
I am unable to put it in cat multiset as have to retrieve these as collection in my sql of ref cursor. please help me in putting it in cast multiset.
Thenks for the reply.
I have allready encounter this page in the past.
I tryed to use "JIMI" wich is a good tool but I haven't found a function to control image resolution in it's documentation.
If you do know how to control dpi threw "JIMI" please tell me.
Similar Messages
-
Using where clause with cast multiset
version
oracle 10g
how to select values based on values in the object.
CREATE OR REPLACE TYPE init_queue AS OBJECT (
seq_num_q NUMBER,
source_system_name VARCHAR2 (50 BYTE),
milestone_id NUMBER,
milestone_date DATE,
downstream_order_number VARCHAR2 (175 BYTE),
leg_id VARCHAR2 (175 BYTE),
statuspro_captured_date DATE,
pon VARCHAR2 (26 BYTE),
milestone_source VARCHAR2 (26 BYTE),
session_id NUMBER,
reconfirmation_flag CHAR (1 BYTE),
vec_flag CHAR (1 BYTE)
CREATE OR REPLACE TYPE tab_init_queue AS TABLE OF init_queue;
SET serveroutput on;
DECLARE
v_list tab_init_queue := tab_init_queue ();
v_arr_sort tab_init_queue := tab_init_queue ();
BEGIN
SELECT init_queue (seq_num_q,
source_system_name,
milestone_id,
milestone_date,
downstream_order_number,
leg_id,
statuspro_captured_date,
pon,
milestone_source,
session_id,
reconfirmation_flag,
vec_flag
BULK COLLECT INTO v_list
FROM r_cust_status_init_queue;
SELECT CAST (MULTISET (SELECT *
FROM TABLE (v_list)
WHERE v_list.milestone_id = 11 -- * How to select values based on milestone.*
) AS tab_init_queue)
INTO v_arr_sort
FROM DUAL;
DBMS_OUTPUT.put_line (v_arr_sort.COUNT);
END;
/Edited by: new learner on Aug 23, 2010 7:35 PMnew learner wrote:
version
oracle 10g
how to select values based on values in the object.
CREATE OR REPLACE TYPE init_queue AS OBJECT (
seq_num_q NUMBER,
source_system_name VARCHAR2 (50 BYTE),
milestone_id NUMBER,
milestone_date DATE,
downstream_order_number VARCHAR2 (175 BYTE),
leg_id VARCHAR2 (175 BYTE),
statuspro_captured_date DATE,
pon VARCHAR2 (26 BYTE),
milestone_source VARCHAR2 (26 BYTE),
session_id NUMBER,
reconfirmation_flag CHAR (1 BYTE),
vec_flag CHAR (1 BYTE)
CREATE OR REPLACE TYPE tab_init_queue AS TABLE OF init_queue;
SET serveroutput on;
DECLARE
v_list tab_init_queue := tab_init_queue ();
v_arr_sort tab_init_queue := tab_init_queue ();
BEGIN
SELECT init_queue (seq_num_q,
source_system_name,
milestone_id,
milestone_date,
downstream_order_number,
leg_id,
statuspro_captured_date,
pon,
milestone_source,
session_id,
reconfirmation_flag,
vec_flag
BULK COLLECT INTO v_list
FROM r_cust_status_init_queue;
SELECT CAST (MULTISET (SELECT *
FROM TABLE (v_list)
WHERE v_list.milestone_id = 11 -- * How to select values based on milestone.*
) AS tab_init_queue)
INTO v_arr_sort
FROM DUAL;
DBMS_OUTPUT.put_line (v_arr_sort.COUNT);
END;
/Edited by: new learner on Aug 23, 2010 7:35 PMLike this.
DECLARE
v_list tab_init_queue := tab_init_queue ();
v_arr_sort tab_init_queue := tab_init_queue ();
BEGIN
v_list.extend;
v_list(v_list.count) := init_queue(1, '1', 11, sysdate, '1', '1', sysdate, '1', '1', 1, '1', '1');
8
SELECT CAST (MULTISET (SELECT *
FROM TABLE (v_list)
WHERE milestone_id = 11 -- * How to select values based on milestone.*
) AS tab_init_queue)
INTO v_arr_sort
FROM DUAL;
DBMS_OUTPUT.put_line (v_arr_sort.COUNT);
END;
1
PL/SQL procedure successfully completed.
ME_XE?ME_XE?
ME_XE?select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
5 rows selected.
ME_XE?It would have been easier if you'd made a simple example so i didn't have to type out the example record (since your original code referenced a table you didn't provide DDL and INSERTS for).
Something to keep in mind for the future (the easier you make it for us, the more likely we are to help). -
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help............... -
CAST MULTISET using a recursive UDT using REF
I am trying to create a recursive object and populate it using cast and multiset. However I keep getting the following error:
ORA-00932: inconsistent datatypes: expected UDT got CHAR
00932. 00000 - "inconsistent datatypes: expected %s got %s"
*Cause:
*Action:
Error at Line: 96 Column: 47
I have been looking on OTN, Google ... every where I can think of. I am missing somthing simple or it is not possible I have not found documentation either way. Found one reference which was close to what I am doing. However the link to the explanation was broken ( Oracle Forums link ).
I have created a simple example below.
PS. Please no comment on using system ( i know :) ) this is a scratch database.
16:53:49 SQL> CREATE OR REPLACE TYPE system.MY_TYPE;
16:54:02 2 /
Type created.
16:54:04 SQL> CREATE OR REPLACE TYPE system.MY_TYPE_LIST AS TABLE OF REF system.MY_TYPE;
16:54:11 2 /
Type created.
16:54:13 SQL> CREATE OR REPLACE TYPE system.MY_TYPE AS OBJECT
16:54:27 2 ( COLUMN1 VARCHAR2(30),
16:54:35 3 SUB_LIST system.MY_TYPE_LIST
16:54:45 4 );
16:54:52 5 /
Type created.
16:54:55 SQL>
16:54:55 SQL> select system.my_type( tc.column_name, null ) from dba_tab_columns tc where tc.owner='SYS' and tc.table_name='DBA_TABLES';
--Should be noted there are no errors occured here* 16:56:00 SQL>
16:57:57 SQL> select system.my_type(
16:59:14 2 v.view_name,
16:59:20 3 cast( multiset (
16:59:26 4 select
16:59:31 5 tc.column_name,
16:59:36 6 null
16:59:45 7 from dba_tab_columns tc
16:59:51 8 where tc.table_name=v.view_name
16:59:56 9 and tc.owner=v.owner ) as system.my_type_list ) )
17:00:01 10 from dba_views v
17:00:06 11 where v.view_name = 'DBA_TABLES';
tc.column_name,
ERROR at line 5:
ORA-00932: inconsistent datatypes: expected UDT got CHAR
17:00:14 SQL>create or replace type t_lookuprec as object
(Select columns1,2,3,....100
FROM A, B, C, D, E
WHERE ROWNUM < 1);You are correct that you need to use CREATE TYPE to use the type in SQL.
However unless I am mistaken you appear to have invented your own syntax for CREATE TYPE, suggest you refer to Oracle documentation. -
Question on using CAST, MULTISET and TABLE
Hi,
I am trying to do something that is utterly meaningless, but I am studying the use of CAST with MULTISET and TABLE.
I have created a type: a Nested Table of Number values:
create type numTable as table of number;
Now I perform the following query:
select d.dname
, ( select avg(column_value)
from table
( cast( d.salaries as numTable)
) Department_Avg_Salary
from ( select cast
( multiset
( select e.sal
from emp e
where e.deptno = d1.deptno
) as numTable
) salaries
, d1.dname
from dept d1
) d
I had expected to see each department name and the average salary within that department. Instead, I see the same Department_Avg_Salary value for each row - the average of the first department:
DNAME DEPARTMENT_AVG_SALARY
ACCOUNTING 1875
RESEARCH 1875
SALES 1875
OPERATIONS 1875
However, when I change the query to the following:
select d.dname
, d.salaries
from ( select cast
( multiset
( select e.sal
from emp e
where e.deptno = d1.deptno
) as numTable
) salaries
, d1.dname
from dept d1
) d
I get the following result - note that each department shows the correct list of salaries, not the list of the 1st department's salaries over and over.
DNAME
SALARIES
---------------------------------------------------------ACCOUNTING
NUMTABLE(2450, 1300)
RESEARCH
NUMTABLE(800, 2975, 3000, 5000, 1100, 3000)
SALES
NUMTABLE(1600, 1250, 1250, 2850, 1500, 950)
OPERATIONS
NUMTABLE()
Can someone explain why the
, ( select avg(column_value)
from table
( cast( d.salaries as numTable)
) Department_Avg_Salary
does not give an average per department but instead only the first department's average?
thanks for your help!
regards
Lucas Jellemascott@ORA92> select d.dname,
2 (select avg(column_value)
3 from table (cast (d.salaries as numTable))
4 where d.dname = dname) Department_Avg_Salary
5 from (select cast (multiset (select e.sal
6 from emp e
7 where e.deptno = d1.deptno) as numTable) salaries,
8 d1.dname
9 from dept d1) d
10 /
DNAME DEPARTMENT_AVG_SALARY
ACCOUNTING 2916.66667
RESEARCH 2175
SALES 1566.66667
OPERATIONS -
How does cast multiset work, I have a huge sql whcih is returning one value say p_opp_id ( on the basis of this i need few more coumns) , i was suggested to use cast multiset , what is cast multiset and how it works
CAST(MULTISET(subquery) AS collection_type) converts the result of a subquery into a collection.
An example I had lying around:
CREATE TABLE master (table_name PRIMARY KEY) AS
SELECT table_name
FROM user_tables;
CREATE TABLE detail AS
SELECT table_name, column_name, data_type
FROM user_tab_columns;
CREATE OR REPLACE TYPE name_strvalue_ot AS OBJECT
( name VARCHAR2(30)
, value VARCHAR2(50) );
CREATE OR REPLACE TYPE name_strvalue_tt AS TABLE OF name_strvalue_ot;
SELECT m.table_name
, CAST(
MULTISET
( SELECT name_strvalue_ot(d.column_name, d.data_type)
FROM detail d
WHERE d.table_name = m.table_name
) AS name_strvalue_tt) cols
FROM master m;
BEGIN
FOR r IN
SELECT m.table_name
, CAST(
MULTISET
( SELECT name_strvalue_ot(d.column_name, d.data_type)
FROM detail d
WHERE d.table_name = m.table_name
) AS name_strvalue_tt) cols
FROM master m
LOOP
DBMS_OUTPUT.PUT_LINE(r.table_name || ': ' || r.cols.count || ' columns');
END LOOP;
END;
/ -
Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
Error in cast multiset in collections
DECLARE
TYPE emp_dept_rec IS RECORD (
v_sal emp.sal%TYPE,
v_name emp.ename%TYPE,
v_deptname dept.DEPTNAME%type
TYPE emp_dept_tab_type IS TABLE OF emp_dept_rec;
l_emp_dept_tab emp_dept_tab_type;
type emp_tab is table of emp%rowtype;
type l_emp_tab is table of emp%rowtype;
type dept_tab is table of dept%rowtype;
type l_dept_tab is table of dept%rowtype;
cursor e1 is
select * from emp;
cursor d1 is select * from dept;
begin
OPEN e1;
FETCH e1
BULK COLLECT INTO l_emp_tab;
open d1;
FETCH d1
BULK COLLECT INTO l_dept_tab;
select cast(multiset (select em.sal,em,ename ,dep.DEPTNAME
from table(l_emp_tab) em,table(l_dept_tab) dep
where em.deptno=dep.deptno)
as emp_dept_tab_type)
into l_emp_dept_tab ;
end;
it is giving error as
ORA-06550: line 43, column 25:
PL/SQL: ORA-00923: FROM keyword not found where expected
ORA-06550: line 39, column 5:
PL/SQL: SQL Statement ignoredHere is an example.
SQL> CREATE OR REPLACE TYPE emp_rec IS OBJECT (
2 v_sal NUMBER(7,2),
3 v_name VARCHAR2(35),
4 v_empno NUMBER(4),
5 v_deptno NUMBER(2)
6 )
7 ;
8 /
Type created.
SQL> CREATE OR REPLACE TYPE emp_tab IS TABLE OF emp_rec;
2 /
Type created.
SQL> CREATE OR REPLACE TYPE dept_rec IS OBJECT (
2 v_deptno NUMBER,
3 v_dname VARCHAR2(50)
4 )
5 ;
6 /
Type created.
SQL> CREATE OR REPLACE TYPE dept_tab IS TABLE OF dept_rec;
2 /
Type created.
SQL> CREATE OR REPLACE TYPE emp_dept_rec IS
2 OBJECT (
3 v_sal NUMBER,
4 v_name VARCHAR2(35),
5 v_deptname VARCHAR2(30)
6 );
7 /
Type created.
SQL> CREATE OR REPLACE TYPE emp_dept_tab_type IS TABLE OF emp_dept_rec;
2 /
Type created.
SQL> set serverout on
SQL> DECLARE
2 l_emp_dept_tab emp_dept_tab_type; --emp_dept_tab_type declared in database
3 l_emp_tab emp_tab; --emp_tab declared in database
4 l_dept_tab dept_tab; --dept_tab declared in database
5
6 CURSOR e1 IS
7 SELECT emp_rec(sal, ename, empno, deptno) FROM emp; --Note the type casting here
8
9 CURSOR d1 IS
10 SELECT dept_rec(deptno, dname) FROM dept; --Note the type casting here
11 BEGIN
12 OPEN e1;
13
14 FETCH e1 BULK COLLECT
15 INTO l_emp_tab;
16
17 OPEN d1;
18
19 FETCH d1 BULK COLLECT
20 INTO l_dept_tab;
21
22 SELECT CAST(MULTISET (SELECT em.v_sal, em.v_name, dep.v_dname
23 FROM TABLE(l_emp_tab) em, TABLE(l_dept_tab) dep
24 WHERE em.v_deptno = dep.v_deptno) AS emp_dept_tab_type)
25 INTO l_emp_dept_tab
26 FROM DUAL;
27 FOR i IN 1 .. l_emp_dept_tab.COUNT LOOP
28 dbms_output.put_line(l_emp_dept_tab(i)
29 .v_sal || '--' || l_emp_dept_tab(i)
30 .v_name || '--' || l_emp_dept_tab(i).v_deptname);
31 END LOOP;
32
33 END;
34 /
1300--MILLER--ACCOUNTING
5000--KING--ACCOUNTING
2450--CLARK--ACCOUNTING
3000--FORD--RESEARCH
1100--ADAMS--RESEARCH
3000--SCOTT--RESEARCH
2975--JONES--RESEARCH
800--SMITH--RESEARCH
950--JAMES--SALES
1500--TURNER--SALES
2850--BLAKE--SALES
1250--MARTIN--SALES
1250--WARD--SALES
1600--ALLEN--SALES
PL/SQL procedure successfully completed.It is just for educational purpose, because the thing you have achieved by so much programming can be done easily by simple join in the table itself.
user10447332 Newbie
Handle: user10447332
Status Level: Newbie
Registered: Oct 20, 2008
Total Posts: 227
Total Questions: 153 (152 unresolved) >
What a record! and most of the time you don't care to follow/revisit the thread also!. -
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len
Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
But not sure that my lenses will work.
I have a 170mm/ 500mm APO Sigma.
A 10/20 ex Sigma HSM IF.
And a 180 APO Sigma Macro or do I have to scrap them and buy others.
ALL Help will be greatly received. Yours BRODIEIn short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide -
Help needed! Raid degraded again!
Hi!
Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
What am I doing wrong!
T: Ekku
K8N Neo4 Ultra
AMD 64 4200+
2 Gb RAM
2 x 250 Gb HDD (Maxtor)
nVidia RAID (in mb)
P.S. I wery SORRY with my poor language!I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
LPB -
HELP NEEDED WITH ADDAPTER-DVI TO VGA.
PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me. -
Hi,
Help needed .
I have an internal table having 6 .
Ex :
f1 f2 f3 f4 f5 f6
a aa 11 p1 10 10
a aa 12 p1 20 20
b aa 11 p2 30 30
b aa 12 p2 40 30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1 f2 f3 f4 f5 f6
a aa 11 p1 30 30.
b aa 11 p2 70 60.
can anyone help me.How to do this..?
ThanksHere you go
DATA:
BEGIN OF cur_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(2) TYPE c,
f6(2) TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
f1 TYPE c,
f4(2) TYPE c,
f5 TYPE p,
f6 TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(5) TYPE c,
f6(5) TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
MOVE-CORRESPONDING cur_tab TO sum_tab.
COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
f4 = sum_tab-f4.
IF sy-subrc NE 0.
WRITE:/ 'Something went very wrong'.
CONTINUE.
ENDIF.
MOVE-CORRESPONDING cur_tab TO final_tab.
MOVE-CORRESPONDING sum_tab TO final_tab.
APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
WRITE:/1 final_tab-f1,
AT 5 final_tab-f2,
AT 10 final_tab-f3,
AT 15 final_tab-f4,
AT 20 final_tab-f5,
AT 25 final_tab-f6.
ENDLOOP.
and the output
a aa 11 p1 30 30
b aa 11 p2 70 60 -
Help needed on installation of Oracle 9i on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM -
Help needed on installation of Oracle 9i EE on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM
Maybe you are looking for
-
How can I reply to only 1 person rather than the whole group
On my iPhone 5 how do I change the settings so that when I am part of a group that receives a message I can reply to only the sender without the other recipients seeing my reply?
-
Mostly websites are not open on internet explorer and other browsers in my laptop
mostly web sites are not open in internet explorer and other web browsers in my laptop.
-
Debt Extension Cost in Fixed Assets
Hi, Could someone please explain Debt Extension Cost in Fixed Assets? thanks. S.Sriram
-
Class Calendar - why does it happen??
Hi. I'm trying to compare two milliseconds values of Calendar objects. I expected to get the same milliseconds representation for the two objects. Somehow, it didn't happen: SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy"); SimpleDateFormat
-
Ignore time component when comparing dates
DB version:10gR2 In one of our codes , the client wants the dates to be compared by ignoring the time component from the date. ie they don't want MM:DD:YYYY HH:MI:SS, they just want MM:DD:YYYY, So I am modifying when ship_date > est_date_del to