CCM and R/3 integration scenario through XI

hello People,
We need to take the material master data from R/3 to CCM.
IS there any XI scenario available for this?
If Yes...where can i find it?
IF No...How much time will it take to develop such a scenario?
Regards
Abhishek.

Hi,
I have emailed this to you.
The senario you want in MasterDataInclusionInCaralogOnWAS700 (or 640 dependant).
Once the material have been replicated from R3 you run transaction BP_CCM_TRANSFER to transfer these to CCM. This then goes through XI into your CCM catalog, and in need you can publish these automatically.
Regards
Rob

Similar Messages

  • ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

    Hi,
    we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
    Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
    My question is:
    We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
    It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
    Best regards,
    Steven

    Hi Abhishek,
      This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna  maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
    Thanks in advance.
    Regards,
    Arunmozhi.

  • Mix B2B and A2A in integration scenario

    Hello XI experts,
    I'm trying to build an integration scenario in the repository that I want to import later on into the directory for automatic configuration.
    The scenario is HTTP -> XI -> RFC. On the sender side I would like to use a business service, so I selected 'External party with B2B communication' for the sending application component. On the receiver side I would like to use a SAP business system, so I didn't select that option there.
    Now, if I import into the directory, this doesn't work as expected. I can select my business service for the sender side, this works. However, for the receiver side I always have to specify a virtual receiver service and my receiver determination and interface determination are created with a virtual receiver service in it.
    Is there any way to avoid the virtual receiver? Any help is appreciated!
    Best regards,
    Matthias

    Hello Aamir,
    you are right, I don't need virtual receivers for my scenaro and I also don't want to use them.
    However, when modelling my scenario with an integration scenario in the design, I'm forced to do this and I would like to know whether there is any way to avoid this.
    In order to be able to use a business service on the sender side, it seems I have to select the checkbox 'External party with B2B communication' in my integration scenario. When importing & configuring the scenario in the directory, I am then able to select by business service for the sender side. However, for the receiver side I have to specify a virtual receiver, otherwise I cannot finish the config wizard.
    Any more ideas?
    Best regards,
    Matthias

  • BI7.0 and MDM(sp06) Integration

    Hi,
    I am working on BI7 and MDM(sp06) integration scenario through ABAP APIs. For this scenario which support packs and API's need to install in BI server and where can I found complete information about integration..... plzz provide some documentation and some links which can guide me..
    Thanx in Advance.
    Rgds,
    Ram

    Hi Reddy,
    Go to [http://service.sap.com/swdc] --> Support packages and patches --> Entry by application group --> SAP NetWeaver --> SAP MDM
    You will get JAVA APIs and Portal Content there.
    go through this link...
    [How to define portal system to access MDM server;
    For a pretty good introduction to MDM workflow, see the following article: [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9180cbaf-0801-0010-f882-f2af6dc975d0.]
    [MDM Workflow - Please help a student!;
    regards,
    NR

  • SCENARIO CREATION IN INTEGRATION SCENARIO

    hi
    I have one sender and two receivers. I am creating integration scenario in repository. in integration scenario creation i have to create three swim lanes or
    two swim lanes? can i add both receivers in one swim lane? and how will i made
    connection between sender and both receivers?
    can any one please help me?
    thanks&regards
    venkat

    Hi Venky,
    I guess you will be sending the same data to both receivers.
    So you do not have to use 3 swim lanes. Create only 2 swim lane.
    1. One for Sender
    2. Second one for Receiver (no need to think here for 2 receivers, think it when you do receiver determination)
    Now, Making a connection will be very easy, just select the ACTION of Sender and Receiver and right click and say create connections.
    For creating and working with integration scenario just go through the below link:
    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
    /people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
    /people/shailesh.mane/blog/2006/06/27/b2b-configuration-part-i--creating-an-integration-scenario
    /people/shailesh.mane/blog/2006/06/29/b2b-configuration-part-ii--creating-the-configuration-using-the-automated-configuration-tool
    If need more help, just reply back.
    Regards,
    Sarvesh
    ****Reward Points if it helped you.
    Message was edited by:
            Sarvesh Singh

  • Error while invoking a scenario from another scenario through ODIStartScen

    hi,
    my requirement is to call a scenario from another scenario. the main scenario contains an interface to get data from jms que and put that in DB and then invoke the inner scenario through ODIStartScen and am executing the scenario through an agent which is on another machine. when am trying to execute the main scenario then i get following error while invoking inner scenario in ODIStartScen step ....
    ERROR:::::
    oracle.odi.runtime.agent.invocation.InvocationException: HTTP/1.1 500 Internal Server Error
         at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:271)
         at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartScenario(InternalRemoteRuntimeAgentInvoker.java:149)
         at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java:266)
         at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java:155)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:3185)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:1414)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2785)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1818)
         at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:559)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
         at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:481)
         at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1040)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
         at java.lang.Thread.run(Thread.java:662)
    the error that is in ODI server log is:
    Root cause of ServletException.
    org.springframework.jdbc.CannotGetJdbcConnectionException: Create DwgConnectConnection to master repository failed; nested exception is java.sql.SQLException: Pool connect failed : java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
         at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:93)
         at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:49)
         at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:58)
         at oracle.odi.core.security.SecurityManager.doODIInternalAuthentication(SecurityManager.java:348)
         at oracle.odi.core.security.SecurityManager.createAuthentication(SecurityManager.java:331)
         at oracle.odi.runtime.agent.servlet.AgentServlet.processRequest(AgentServlet.java:494)
         at oracle.odi.runtime.agent.servlet.AgentServlet.doPost(AgentServlet.java:454)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: java.sql.SQLException: Pool connect failed : java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
         at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
         at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
         at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113)
         at com.sunopsis.sql.SnpsConnection.createConnection(SnpsConnection.java:380)
         at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java:338)
         at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:88)
         at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:49)
         at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:58)
         at oracle.odi.core.security.SecurityManager.doODIInternalAuthentication(SecurityManager.java:348)
         at oracle.odi.core.security.SecurityManager.createAuthentication(SecurityManager.java:331)
         at oracle.odi.runtime.agent.servlet.AgentServlet.processRequest(AgentServlet.java:494)
         at oracle.odi.runtime.agent.servlet.AgentServlet.doPost(AgentServlet.java:454)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: java.sql.SQLException: Pool connect failed : java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
         at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:258)
         at weblogic.jdbc.pool.Driver.connect(Driver.java:160)
         at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:652)
         at weblogic.jdbc.jts.Driver.connect(Driver.java:127)
         at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355)
         at org.springframework.jdbc.datasource.UserCredentialsDataSourceAdapter.doGetConnection(UserCredentialsDataSourceAdapter.java:162)
         at org.springframework.jdbc.datasource.UserCredentialsDataSourceAdapter.getConnection(UserCredentialsDataSourceAdapter.java:133)
         at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
         at java.lang.Thread.run(Thread.java:662)
    Caused By: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
         at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:835)
         at weblogic.security.service.IdentityUtility.authenticatedSubjectToIdentity(IdentityUtility.java:30)
         at weblogic.security.service.RoleManager.getRoles(RoleManager.java:183)
         at weblogic.security.service.AuthorizationManager.isAccessAllowed(AuthorizationManager.java:375)
         at weblogic.jdbc.common.internal.JDBCUtil.checkPermission(JDBCUtil.java:231)
         at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:357)
         at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:317)
         at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:93)
         at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:106)
         at weblogic.jdbc.pool.Driver.connect(Driver.java:149)
         at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:652)
         at weblogic.jdbc.jts.Driver.connect(Driver.java:127)
         at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355)
         at org.springframework.jdbc.datasource.UserCredentialsDataSourceAdapter.doGetConnection(UserCredentialsDataSourceAdapter.java:162)
         at org.springframework.jdbc.datasource.UserCredentialsDataSourceAdapter.getConnection(UserCredentialsDataSourceAdapter.java:133)
         at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
         at java.lang.Thread.run(Thread.java:662)
    kindly help me out.
    thanks in advance.

    In the batch File write this way
    cd E:\OraHome_ODI\oracledi\bin
    E:
    startscen EXT_DATA 002 GLOBAL In case you are providing the values (EXT_DATA 002 GLOBAL) as parameter
    then call the startscen this way
    cd E:\OraHome_ODI\oracledi\bin
    E:
    startscen %1 %2 %3

  • Problems in creating an Integration domain through Platform 9.2 Configuration Wizard.

    Hello,
    I've have installed WLS platform 9.2 (on Windows XP) and created
    an integration domain through Configuration Wizard. The DB for the
    domain I specified in the Wizard is MS SQL 2000. The domain was created
    in the end. But when I start the (Admin) server I keep getting
    errors related to the DB that the WLI would expect to be populated
    by default. Many thanks advance for any pointer to resolve these
    DB errors.
    ---Nam Nguyen
    - Part of the error log.
    Warning: [BEA][SQLServer JDBC Driver][SQLServer]Cannot drop the table
    'BT_EVENT_TYPE', because it does not exist in the system catalog.
    Executing stmt: CREATE TABLE SEQUENCER ( SEQUENCE_NAME VARCHAR(50) NOT
    NULL, CURRENT_VALUE NUMERIC(15) NOT NULL, IS_LOCKED NUMERIC(1) NOT NULL)
    Executing stmt: ALTER TABLE SEQUENCER ADD CONSTRAINT CC1_SEQUENCER
    CHECK ( IS_LOCKED BETWEEN 0 AND 1 )
    Executing stmt: ALTER TABLE SEQUENCER ADD CONSTRAINT PK_SEQUENCER
    PRIMARY KEY NONCLUSTERED ( SEQUENCE_NAME ) ON WEBLOGIC_INDEX
    java.lang.Exception: SQLException when executing file
    file:/C:/bea92/weblogic92/common/p13n/db/sql_server/seq_create_tables.sql
         at com.bea.plateng.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:182)
         at
    com.bea.plateng.wizard.domain.gui.tasks.JDBCConfigGUITask$LoadDatabaseThread$1.run(JDBCConfigGUITask.java:1663)
    Caused by: java.sql.SQLException: [BEA][SQLServer JDBC
    Driver][SQLServer]Invalid filegroup 'WEBLOGIC_INDEX' specified.
         at
    weblogic.jdbc.base.BaseExceptions.createException(Ljava.lang.String;Ljava.lang.String;I)Ljava.sql.SQLException;(Unknown
    Source)
         at
    weblogic.jdbc.base.BaseExceptions.getException(Ljava.sql.SQLException;II[Ljava.lang.String;Ljava.lang.String;I)Ljava.sql.SQLException;(Unknown
    Source)
         at weblogic.jdbc.sqlserver.tds.TDSRequest.processErrorToken()V(Unknown
    Source)
         at
    weblogic.jdbc.sqlserver.tds.TDSRequest.processReplyToken(BLweblogic.jdbc.base.BaseWarnings;)Z(Unknown
    Source)
         at
    weblogic.jdbc.sqlserver.tds.TDSRequest.processReply(ILweblogic.jdbc.base.BaseWarnings;)V(Unknown
    Source)
         at
    weblogic.jdbc.sqlserver.SQLServerImplStatement.getNextResultType()I(Unknown
    Source)
         at weblogic.jdbc.base.BaseStatement.commonTransitionToState(I)V(Unknown
    Source)
         at weblogic.jdbc.base.BaseStatement.postImplExecute(Z)V(Unknown Source)
         at weblogic.jdbc.base.BaseStatement.commonExecute()V(Unknown Source)
         at weblogic.jdbc.base.BaseStatement.executeUpdateInternal()I(Unknown
    Source)
         at
    weblogic.jdbc.base.BaseStatement.executeUpdate(Ljava.lang.String;)I(Unknown
    Source)
         at
    com.bea.plateng.domain.jdbc.JDBCDataLoader.loadData(JDBCDataLoader.java:748)
         at com.bea.plateng.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:166)
         ... 1 more
    Database Load Failed!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Bishnu Kumar wrote:
    Nam,
    By default the backend database is Pointbase.But if you want to use another database you need to run all SQL scripts which is needed for the WLI server.Also, while creating the domain you need to alter the database settings(Driver,Connection pool).
    You can find the SQL Scripts at location :in weblogic installation directory.
    weblogic81\integration\dbscripts\mssql
    Hope it works for you if work around this.
    Regards
    BishnuThanks, Bishu. The problem is actually 2-fold:
    a) this was executed by the Wizard; and I didn't have the same problem
    when using the Wizard in 8.1 sp6.
    b) I don't know the sequence of the SQL scripts I should run.
    Again, thanks for any pointer.
    ---Nam

  • Integration Scenario Configurator

    Hello!
    I want to generate the receiver determination for an integration process on XI 3.0 SP10 with the Integration Scenario Configurator.
    I have created an Integration Scenario in the Integration Repository, there are no errors when checking with F7.
    If I open it in the Integration Directory and go to Integration Scenario Configurator -> Check Configurability I get the following error message:
    "Component View /Role <my Integration Process>: Only connections with interfaces that belong to the integration process interface are permitted"
    What does the error message mean? What do I need to change to eliminate this error message?
    The connections point to interfaces I have defined in the same software component as the integration scenario and process. For the integration process I have created abstract interfaces.
    Regards, Tanja

    Hi Simon!
    I was able to solve this problem some weeks ago but thanks for your hint anyway.
    As you have mentioned the problem was that in the Integration Repository the integration scenario was not consistent with the used integration process as it  contained a wrong interface.
    After I have corrected the integration process in the Integration Repository and updated the changes in the Integration Directory the generation with the Integration Scenario Configurator worked without any problems and the status of the process changed to 0 in SXI_CACHE.
    Regards, Tanja

  • Integration Scenario

    Hi All,
    I am new to XI. I need to know about Integration Scenario. What is it? Why we are using Integration Scenario? How it differs from Integration Process? and how to use Integration Scenario? Give a simple example (like file to file using Integration Scenario).
    Thanks and Regards,
    Nithya

    Hi,
    >>>Integration Scenario,Why we are using Integration Scenario,how to use Integration Scenario
    Integration scenario is used to logically relate all XI objects for a particular scenario. It also eases the creation of configuration objects.
    You use an integration scenario to define the message exchange and message flow for collaborative processes. Normally, these are processes between different business partners that are generally coupled by the exchange of messages.
    The integration scenario provides you with a central point of access for all objects that you require for semantic and technical integration, for example interfaces, mappings, and software components.
    You can integrate an executable integration process into an integration scenario.
    Follow the blogs for more details:
    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
    /people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
    http://help.sap.com/saphelp_nw2004s/helpdata/en/88/7adb7a030b424b8ef29b99461e52a8/content.htm
    Modelling Integration Scenarios in XI
    Integration Scenario
    Integration Scenario
    >>> Integration Process
    An integration process is an executable, cross-system process for processing messages. In an integration process you define all the process steps that are to be executed and the parameters relevant for controlling the process.
    You implement integration processes when you want to define, control, and monitor complex integration processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM).
    Please refer http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
    Hope this will help you.
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • Conditional Receiver Determination Through Integration Scenario

    Hi
    My question is "Is  it possible to generate conditional receiver detrmination through integration scenario?"
    If yes then how?
    Thanks and Regards
    Sami

    Hi Biplab,
    Yes , there is lots of modification in PI 7.1. and we start using it, you will come to know. In this TechEd at banglore , i did hands on the Mapping and it was really good experience, When i started configuring ID, i came to know some powerful ways, and yes i am really looking forward to working on it. Actually, as you know when we configure everything in ID, it becomes complicated, that is rectified thr and also some additional features. Pretty faster than PI 7 we using. also configuration in some extend is automated, we doen't need to bother to configure some of the steps :).
    Also you must know that, it added a concept of ESR for IB. Just have a look on some of the PPT for PI 7.1 and you feel it :).
    Aashish

  • Integration scenario for Centralized Emergency Access and Helpdesk / CHARM

    Hi,
    Is any of you aware of a scenario doc between GRC and SOLMAN? Since Change Requests are referred in GRC, I assume there is an integrated scenario...
    Thanks in advance,
    Best regards,
    Ádá

    Can Firefighter logon using the Netweaver Business Client to launch Firefighter ID?
    - No, GRAC_SPM is the way to go.
    Is that mandate to use GRC system to launch Firefighter ID using GRAC_SPM transaction code? or can the user logon to local system as well?
    - Yes. However, the option would be nice to have a workaround in case GRC is down
    What about Portal based system Firefighting functionality? Can we have Firefighter IDs on Netweaver Java system?
    - As far as I know only for transactional SAP systems.
    Will I be able to grant a Firefighter ID to a Firefighter User on hourly basis?
    - Same as answered already  - no. 
    For initial setup , how the initial data load of Firefighter Ids Owners, Controllers and Firefighter Users can be done? Are there options like load from Excel or CSV available as part of setup toolset?
    - Same as answered already  - no.

  • Integration scenario and configuration scenario - is it madatory

    Hi,
    Integration Scenarios are not mandatory, the reason for creating them is given in the blog you mentioned:
    The advantages of defining integration scenarios in the Integration Builder (design tool) are as follows:
    · The integration scenario provides you with an overview of the process and the process flow
    · The integration scenario club together all objects like SWVC,Interface objects, mapping objects,integration processes.You can access all of these objects from the integration scenario.
    · The integration scenario gives you the design time information which is required for its configuration.
    The configurtation items are getting created.
    Regards
    Patrick

    Hi Priya,
       There are two things here.
    1) Create the Integration Scenario in the IR.
    2) Use the wizard to configure the integration scenario in ID.
    The Integration scenario created in the IR acts as a template to create the configuration objects in ID.
    The wizard will create the actual configuration objects only (not just documentation).
    But creating integration scenarios is not mandatory.
    YOu can as well create all the configuration objects manually.
    Generally, you will go for Integration scenarios if you are building a general purpose product (Product based ).
    If it is a project that you are building for a particular customer, you can chose to create the configuration objects using the configuration scenario approach.
    Regards,
    Ravi kanth talagana

  • Regarding Integration Scenario and Communication Channel Template

    Dear All,
    1.What is the purpose of creating Integration Scenario in IR?Is it compulsary to create Integration Scenario in Every Case?(I mean Scenario not using BPM and Scenario using BPM).
    2.What is the purpose of creating Communication Channel Template in IR?
    3.If we create Communication Channel Template in IR?Do we need to utilize that Communication Channel Template for creating Communication Channel in ID?
    4.IF we have created Integration Scenario in IR,and we transfered that Scenario from IR to ID,then Do we need to create Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination?or will they automatically created?
    Please clarify my doubts.Thanks in Advance.
    Regards,
    Ramana.

    Hi Ramana,
    <i>1.What is the purpose of creating Integration Scenario in IR?Is it compulsary to create Integration Scenario in Every Case?(I mean Scenario not using BPM and Scenario using BPM).</i>
    >>> For graphical overview about the sceanrio.It is not compulsary to create Integration Sceanrio.
    <i>2.What is the purpose of creating Communication Channel Template in IR?</i>
    >>> In integration scenario while creating the connection between two actions u need to specify the communication channel templates for Sender and Receiver.
    <i>3.If we create Communication Channel Template in IR?Do we need to utilize that Communication Channel Template for creating Communication Channel in ID?</i>
    >>>You can utilize these templates in ID.After completion to creating the configuration sceanrio need to modify the parameters of the channels.
    <i>4.IF we have created Integration Scenario in IR,and we transfered that Scenario from IR to ID,then Do we need to create Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination?or will they automatically created?</i>
    >>> From Tools-->Transfer Integration sceanrio from Integration Repository, From input help choose the sceanrio,Continue and click on Finish ,with the same name the configuration scenaro will create in ID.You need to follow the Confiuration steps like <b>Assign services</b> , here need to choose u r source & target business systems and <b>Configure Connections</b> in this step you can cross check the interfaces,mapping,channel templates involved in this sceanrio and <b>Generate</b>. It would automatically generates Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination. It would shown to u Generation Log, here you can check what are the objects generated and if there are any errors it would shown Number of errors.
    By setting the appropriate channel parameters, activate all objects from change list.Now u can able to test the sceanrio.
    However in latest version it is not compulsoary to create Integration sceanrio in IR and to the above things.You can use Configuration Wizard to do all these things or you can do these mauvally.
    Hope it will helps to clear u r doubts.
    Cheers
    Veera
    >>>Reward points,if it is needful.

  • Integration Scenario Configuator and Business Services (B2B)

    We use Business Services to define the services provided by our external business partners (e.g. a transport organization has defined some webservices to which we connect to).
    The reason why we use Business Services is that we don't have to define them in the SLD. And we understand from the documentation that external business systems should be defined as Business Services and not Business Systems.
    Now we want to use the Integration Scenario Configurator, but when we define a B2B service in the Integation Scenario, we cannot create the communication channels with the wizard. Futhermore the other object (receiver determination etc.) is also not created for the business service.
    When we take a look at the definition of a B2B scenario in the SAP documentation, the documentation describes a complete different use of B2B. We understand from the documentation that B2B is a cross company XI landscape where all partners have there own XI system. This also explains the behavure in the configurator since one party cannot access its own business systems.
    This leaves us with the following questions:
    1. Is B2B only possible for XI to XI scenario's?
    2. Is a service provided by a partner a business system?
    3. And do we have to include all communication end point in the SLD?
    Kind regards,
    Christiaan Schaake

    Dear Christiaan,
    I encountered the same problem. What I did was that I created a party for the external business partner and assigned a business service to it. Beside this you have to check the box (ext. party w. B2B comm) under communication type in the application component in the integration scenario.
    When you have done this you can create comm. channel with the wizard and also the other objects.
    see: http://help.sap.com/saphelp_nw2004s/helpdata/en/e6/908d3f7057eb0ce10000000a114084/content.htm
    Regarding your questions: depending on the way we think, we can come up with different answers. I don't think this is what you're looking for.
    Maybe someone else can give you a clear answer.
    Kind Regards
    Ron van Steen

  • One integration scenario Many target system and Outgoing compressed data

    I have some theoretical questions about XI usage.
    At first, I'm not quite sure about the following thing: for example we have a corporate system and a lot of mobile computers (let's name them "clients") with installed small databases. Number of clients is not constant, but integration scenario is one for all of them. Next, if we add new client we must add new technical system, business system, communication channel, configure scenario, add required receiver and interface determination, and so on and so on. If we remove client we also must do all these steps. In this case, is it possible in XI (anywhere) to automate these procedures of scenario configuration? For example create something like business system template with communication channels or have one business system and a lot of communication channels in one integration scenario (in this way I suppose that message will be delivered to target system on the message content-based routing) and quickly activate/deactivate this channels (in fact receiver determination).
    At second, we know that XI can receive and send compressed data if client initiates communication with XI. Anybody know about reverse functionality, when XI initiates communication with target system and compresses data (on the understanding that target system is able to receive and handle compressed data). If anybody know that is possible - can you navigate me to this information?
    Thank you for help,
    Best regards.

    Hi Maxim,
    You dont need to create techn and bus systems in SLD for your clients as you can use business services. Of course you have to create a comm channel for every client (receiver address is individual!). Receiver determination and interface determination can be configured dynmamicly with wild cards (*). You can find receivers by condition of payload content.
    If you want to change this conditions very quickly (with a customizing table) you can use following trick: Use a ABAP mapping which is reading that table. Unfortunately the message is first routed and then mapped. So you have to send the message over http adapter back to XI, where the changed message is now routed by a condition. Of course a quite complex scenario, the monitoring is even more complex bcoz doubled no of messages (no performance problem - http adapter is never a bottleneck).
    Regards,
    Udo

Maybe you are looking for

  • How do I lower the brightnes of my desktop environment?

    I know there is asked before about setting the brightness but I didn't find a nice answer. Maibe there is none. But if there is I'd like to know in simple steps what I'm supposed to do... I can hardly look at my screen so bright... hurts my eyes... I

  • Missing schemes in Presentation Director

    After installing Presentation Director 4.07, I was shocked to discover all the display schemes missing. I've tried adding new schemes but the program doesn't seem to recognize the notebook LCD display - I'm unable to set the resolution or color depth

  • Mac SUDDENLY reboots continuously and displays apple logo that is half blue and half gray

    I was surfing the web and my Mac goes black and reboots unexpectedly. I say OK, fine.....gray screen comes up then a Apple Logo that is half Blue and half gray appears with a graduated progress bar under the logo......it progresses half way then rebo

  • As ABAP tasks in SAP Provisioning framework

    Hi Experts, In HR provisioning , for a new hire when a new MX_PERSON is created in Identity store , User accounts need to be created in the SAP systems from IDM .For this I noticed "AS ABAP tasks " in SAP provisioning framework with create/delete use

  • Why can't I open my employer email after downloading 4.0

    After downloading 4.0, I can no longer open emails on my employers system.(lotus notes) I get a message that the Domino Web Access can't respond to my request.