CD-R has static/distortion

I burned a CD-R in iTunes v.10.1 but there is static/distortion toward the end of the CD-R. This is a first. Any suggestions as to what went wrong? Thanks so much.

n m u wrote:
Thanks so much. After posting my question I found a Forum suggestion to undo any iTunes Equalizer settings, so I did; and also lower the burn speed, so I burned a new CD-R at 6x. It seems to have worked.
Glad it worked.
If I use iTunes and iVolume to adjust the volume levels before I burn a Playlist, would listening with headphones be the best way to make sure I am satisfied with the volume of each song in that particular Playlist?
If the choice is computer speakers or high quality headphones, you will hear better over the headphones. iVolume is quite good at equalizing, but for best quality you should listen and evaluate.

Similar Messages

Firewire Audio Static/Distorted

In the middle of a project today, during playback, audio through Firewire deck became static, distorted, too loud. Audio meters in FCP are fine, but meters on firewire deck are pegged. Tried other projects and they have same problem. Swapped firewire cable to no avail. Switched over to my MacbookPro but rest of my regular peripherals and played the same project without the problem... so it must be something in my MacPro Tower. If I set FCP to playback audio through computer, not firewire, it plays fine.
Ideas?

I've seen this issue on several IntelMac edit stations when FCP 6 was first released on through v6.0.2. Just to compare, the problem I've witnessed is that the Firewire audio out will suddenly be nothing but digital garbage; distorted, garbled, scratchy noise. Changing the audio routing to the internal speakers results in normal audio, but as soon as you change it back to Firewire (or Audio Follows Video), nothing but garbage again.
AFAIK, trashing preferences has always worked ... keep us informed on what you find out.
-DH

A non-solution to the static distortion problem

I don't know if there's any chance of the following "solution" having value to anyone else but I'll submit it to be filed in the "For What It's Worth" folder.
First, by way of preamble, I've upgraded iTunes a number of times now (going back to v. 4.6.0.15) and this is the first time I have had any sort of issue - the static/distortion problem that is presently being much-discussed in these forums.
Following the leads in the early threads on this topic, I played a handful of song files with QuickTime and confirmed that everything sounded fine with that player.
I went back to iTunes and the problem remained, although it struck me that it wasn't as severe as it had been.
I continued playing songs, hoping for some sort of insight into what had gone wrong when it slowly dawned on me that the static/distortion had ended ... and I hadn't done anything - changed settings or anything else - except simply play songs.
iTunes has been playing for a couple of hours now with no further sign of the problem.
One final point of information, I'm guessing it was after having played in the area of 10-15 songs when the problem seems to have solved itself.

I'll also add that I've since re-enabled the options I originally changed to "fix" my problem. I'm no longer getting the distortion, even with the options I changed.
I'm not sure what's going on.. I guess I'm just glad my music is back to normal and that I can browse the Internet AND listen to music!

RfcAdapter: receiver channel has static errors: can not instantiate RfcPool

HI,
While transferring the project from SAP system to PRIMVERA (third party system) system, iam getting the following error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=192.168.215.138 SYSNR=02 GWHOST=192.168.215.138 GWSERV=sapgw02 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '192.168.215.138apgw02' not reached TIME Sun May 01 06:10:03 2011 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3133 DETAIL NiPConnect2: 192.168.215.138:3302 SYSTEM CALL connect ERRNO 10060 ERRNO TEXT WSAETIMEDOUT: Connection timed out COUNTER
experts, kindly help me out in resolving this issue.
Regards,
Sai

partner '192.168.215.138apgw02' not reached
Well if you ask me, theres something seriuosly wrong with above "partner", review the config of the RFC/JCO,
also you could add more details as above info on its own is not enough to give you and objective answer
Regards
Juan

Video audio has static

I just recorded a 6 minute song at a concert last night and it has static sound throughout. I never had this problem before. Any suggestions?

Hi roygbiv28,
You will typically get static when the sound or music you are recording is too loud. The BlackBerry® smartphone's microphone, as with all microphones, have limitations on decibel levels.
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

HT4623 My I pad has sound distortion any ideas what is the problem?

My iPad has sound distortion what can be the problem and solution. I have the latest version of the Software.

iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180http://support.apple.com/kb/ts5180
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

MuVo N200: Static/distorted so

Hey- I have had my MuVo micro N200 for few months now (and enjoying it!!!)...and like I have read about some others on this site, it appears the sound has become distorted. I tried different headphones then formatted but neither worked.
I read a number of messages that said to download the latest firmware. I am not very computer savy...should I download the .5 version, or the .2 (Audio) version, or BOTH?
Thanks! I REALLY miss my tunes

Try the .2.0 version first to see if that cures your problem as it is easier to install than .5.0 (you don't need recovery mode).
For a lot of problems it is that act of reloading the firmware and not which firmware you use that cures the problem.
PB

Static Distortion in HS-1000 headphones

I recently purchased a HS-1000 headset, and after the cd failed to install anything for some reason, I simply downloaded the necessary drivers for the headset. The first time I used it, it sounded great. However, the next time I used the headset it had a constant static-like sound distortion. I tried reinstalling the drivers, getting the necessary firmware updates (I have vista 32-bit), and even downloaded the update for the creative entertainment console. Initially, the first time after updating the firmware the headphones worked fine. But then the second I used them after updating it went right back to having distortion again. I even tried disabling my wireless card, but that did nothing.
Any help/ideas would be greatly appreciated, as I really like this headset and would love to make it work.

I have also been following that thread having problem with my headset as well. Just so sad that creative has not responded to help us who have problems with this product. Customer service is also the same. Hopefully in time they will respond.

ITunes 12.1 has static-y music, the 64 bit iTunes for old video drivers did NOT fix

Playing music on my iTunes has all of a sudden become static-y as of the 12.1 update, I looked for a while and found the "64 bit iTunes for older video drivers" and found that it fixed the problem for most people, I installed it and tried playing music, it's still static-y, I've changed my audio bitrate playback and bits per sample and nothing has changed, does anyone have a fix?

Did you see if changing the Play Audio Using select in Edit > Preferences > Playback to "Direct Sound" resolves the issue? Otherwise you may want to consider rolling back to 12.0 and waiting until a future release is shown to resolve the playback issues in 12.1. See Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

My iPad 3 has mechanical distortion from the speakers

Apple replaced my first iPad 3 due to mechanical distortion issues with the internal speaker. Now my new one is doing the same thing. I don't play anything loud or usual I mostly listen to news and podcasts. But within a couple weeks the new iPad began having gate same problem. I've reset and reinstalled the OS.
Is anyone at one else having this issue or does anyone know a solution to it other than having the tablet replaced again.

Hey Scott,
I went to apple store today for the same problem, warranty expired, the guy from genius bar sounded more like a salesman. Without even checking my iPad told me it may need to be replaced (same Generation) and that would be $300.00. ...or getting the iPad mini for the same price. That make me upset since my iPad has retina display, cell antenna and 64GB. Bought less than 2 years ago. I wonder if you paid the same for your replacement, or was less or more.
Thank you for your reply

VLC sound has static

Recently, I think after the most recent kernel upgrade, VLC has had audio static in all the videos I play. These same video files will not have the static if they are played with MPlayer. Running VLC from the terminal shows no errors. Any suggestions on how to fix this, or any others with a similar problem?
Last edited by justin (2007-12-13 05:44:23)

Allan wrote:
justin wrote:Xvid.
Surely thats the video...
Ya, that was dumb. Mpga is the audio codec.

Intermittant audio static/distortion when streaming video

New member seeking solution to an annoying problem. When
streaming video sites such as Youtube, MSN videos, and other video
sites, the audio has intermittent static, much like a radio station
that isn't fully tuned in. I have a laptop with an external sound
card, and it does it through it hooked to a small stereo system, as
well as the laptop's built-in soundcard and speakers. I have
updated the Flash player, and tried completely uninstalling and
reinstalling the sound drivers. Next thing, I am going to totally
uninstall Adobe Flash and try reinstalling it to see if it takes
care of the problem. By the way, it does it with both Internet
Exploder and Firefox. Any suggestions are welcome.
Sincerely,
John

The same thinks happens to me,
Thank you.

Left speaker has static sound

the left speaker in my hp pavilion m6-1045dx laptop has a static sound and the right works perfectly. When I put on my headphones I can hear the static sound clearly and it's really annoying. If anything I know it's not the headphones because I tested two headphones and they both had that static sound in the left ear, while the right worked fine.

No but is covered by iPhone 12 month warranty
If still in warranty take to an Apple store

Since last update, my iPad has a distorted sound is this normal, and can it be fixed. It sounds like my speakers are busted

Has anyone else had problems with the sound coming out of their iPad since the last up date? Very annoying and distorted.

Other have had issues. They've reported some success by going into the settings and 'reset all settings'

HP ENVY m6 has static colourful lines on screen

My HP laptop has recently started to go fuzzy and colourful, you can still see windows 8 in the background however it is distorted and cannot be used as you cannot read what is on the screen and the right side is not visible as the laptop has blow up the image cutting of that part of the screen.
My laptop is a HP ENVY m6, any help is appreciated.
Thanks.

Hello Joelanden,
Welcome to the HP Forums!
understand your computer display is experiencing issues display issues. I will do my best to assist you! To troubleshoot the issue, please refer to the relevant sections of this HP document: Display Quality Issues
The sections I would like you to refer to are "several colored vertical lines in the display", "screen is discolored" and "general troubleshooting tips for display quality issues". Please try all of the troubleshooting and let me know the results.
Thanks again for posting on the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

CD-R has static/distortion

Similar Messages

Maybe you are looking for