CFLayout - Jumping in IE -BUG?-

Simpe bit of code within a cflayoutarea.
In Firefox it displays fine; in IE7 it will jump after
loading from looking fine to leaving a gap between the tab to the
table this grap grows as the table gets bigger! it does not appear
until the table is about twice the size of the tab.
Anyway of fixing this; as my application is getting used more
and more often this bug is going to make the current design
useless.
HELP!!!
See code below.

Seems the layout tag hated the table been set to
Align=Center">
Remove that and it is fine... oh well need to tweak the
layout.

Similar Messages

Constant Power Transition Sudden Jump in Levels Bug

Sorry if the discussion's title is confusing – that's honestly the best way I could think of to explain what I'm experiencing. Here's a video screen grab with audio to illustrate further the possible bug I've run into: Premiere CC 2014 Audio Transition Bug - YouTube Do you hear that little jump in volume right as the playhead plays through the transition? It almost sounds as if it's doing the precise opposite of what the fade should be doing.
I'm just trying to add some small, two-frame, Constant Power transitions to some audio tracks to smooth out a cut – one of the oldest tricks in the book. I see this in many different kinds of projects, regardless of size, creation date, types/formats of media used, timeline settings, etc. It mostly just seems random to be honest.
This specific project is very minimal with all 1080p ProRes media being used. No .MTS, .MP4, or anything of the like. The project is all cuts, and no fancy VFX, titles, color grading, dynamic linked clips, etc. It's all quite simple.
Does anyone have any ideas on how to fix this problem? Thanks in advance for your help!

I see you have a stereo track. When I panned my tracks 100 I would get pops and glitches, when I panned them 99 the pops and glitches went away. Adobe support also told me that Constant Gain is the least buggy of all the transitions, while Constant Power is the most buggy.

The cursor jumps to wherever the pointer is while typing in text boxes.

While typing in a text box, the blinking cursor will jump to wherever the mouse pointer is and begin inserting the typing there. It happens both on external mouse and on touchpad. It's only on Firefox, I've tested IE and it's fine. Sometimes it is the ' that causes it (I read up on the "jump to find" bug), but it seems to be mostly the spacebar that sets it off. I've had it happen on various websites, blogs, emails, internal site mailboxes, seems to be everywhere. Sometimes a FF restart helps, sometimes a computer restart helps, sometimes nothing helps.
I've also had site pages jump "back" in the middle of typing in a text box as well. At first I thought I was hitting the touchpad while typing by mistake but it happens with the external mouse as well. I have the touchpad disabled while ext. mouse is used.
FF is Version 3.6.10, and I'm on laptop.
Plleeeeezzze don't tell me I have to go back to IE. ewwwww

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Issues with art jumping when duplicate boards created

I'm attempting to create an interactive pdf file (starting in AI CS6 16.2.1) with my MPB. When I duplicate an artboard and hold shift to drag it (with content inside) the original board contents move randomly off by 3-4 pixels. Sometimes the original board has certain elements that jump and others don't. It's quite random, and very frustrating as both boards need to be identical. I've checked that align to pixel grid, snap to grid, and snap to point were all turned off. is this a known glitch or what's going on?

The SHIFT-OPT-DRAG 'jumping' is a bug — see the following:
http://forums.adobe.com/thread/1218843
The flyout/duplicate works fine — the issue is the speed at which the cursor moves when duplicating a new artboard.

What's the one thing you hate about Gnu/Linux?

Hello everyone, this is my first post.
What's the one thing you hate about Gnu/Linux or any other FOSS OS?
I would say Xorg. Mainly because it asynchronous and that cause windows tears.
Try resizing a window. See how it kind of jumps. It bugs me
I only wish something would replace Xorg soon.

brebs wrote:
the one thing you hate
Backwards-compatibility is cheerfully broken, about a hundred times too often.
,..not to mention regression.
Linux is free, because people wouldn't want to pay a company in return for such treatment.
Agreed.
People (and especially companies) actually prefer to pay for operating systems; it transfers responsibility and reprehensibility onto an external entity when something goes wrong.

Service Requests remain In Progress when all Activities are Completed

Hello Experts, we're periodically finding Service Requests remain In Progress, when all Activities within the SR are Completed.
Specifically this is happening when a RB Activity within the SR template has generated an Incident and attached it to the SR, and all of the Activities within the SR are Completed prior to the Incident being Closed.
Has anyone run into this situation?
Even if we had means to easily find this scenario in our system that would ease our pain -- is it possible to use PowerShell to return all Service Request's which are In Progress but have all child Activities marked as Completed?
Thanks!

I've run into a couple of Service Request status issues. I'm convinced the SR status workflows are not as well designed as the other out of the box work item workflows. I've recently run into a problem with Service Requests failing to start (i.e. stuck forever
in New status) depending on how they were created, and Here's a similar script i used to address the SR's jumping to completed bug from early in 2012.
import-module smlets
#Variable Setups
$SRCompleted = Get-SCSMEnumeration ServiceRequestStatusEnum.Completed$
$SRCompletedID = $SRCompleted.id
$SRInProgress = Get-SCSMEnumeration ServiceRequestStatusEnum.InProgress
$ACCompleted = Get-SCSMEnumeration ActivityStatusEnum.Completed$
$ACSkipped = Get-SCSMEnumeration ActivityStatusEnum.Skipped$
$SRClass = Get-ScsmClass System.WorkItem.ServiceRequest$
$ContainsActivity = get-scsmrelationshipclass System.WorkItemContainsActivity$
$SRReset = $False
#Get SR in question (from workflow params)
$SR = get-scsmobject -class $SRClass -filter "id -eq $ID"
#Get all children relations.
$ChildREls = Get-SCSMRelationshipObject -BySource $SR | ? {$_.relationshipid -eq $ContainsActivity.id -and $_.IsDeleted -eq $False}
#if there are children (don't reset SRs that don't have activities)
if ($ChildRELs) {
foreach ($childREL in $ChildRELs ){
#Get Activity from child relation.
$ChildAC = (get-scsmobject -Id $childREL.TargetObject.id)
if (!($ChildAC.Status -eq $ACCompleted -or $ChildAC.Status -eq $ACSkipped -or $ChildAC.Skip -eq $True)) {
$SRReset = $True
if ($SRReset) { Set-SCSMObject $sr -Property Status -Value $SRInProgress }
the important part of that script is the bit where i'm walking each child and checking it's status. you could adapt this to your situation with some framing adjustments.

IPod Touch skips (jumps to the end of) the first track. Bug?

Hello,
I'm experiencing the following problem with my iPod Touch and was unable to find any information about similar cases in different forums:
I have several Audible.de audiobooks on my iPod that are by default listed under "audiobooks". Recently I noticed that sometimes my Touch would jump over the first track of a music album when I would start playing the first song, directly jumping to the end of the track and starting to play the second (while the status dot stays at the end of track 1 for a while). It looks as if I had fast forwarded to the very end of the first track - and it happens with the first track only.
I've removed all the music and books from my Touch and moved it back using iTunes, but this didn't help for long. If I completely turn off the Touch and turn it back on, the problem is solved for a moment. I kept asking myself why the problem would reoccur and it seems to me that it has to do with the audiobooks I'm listening to often. I tried the following:
1. Switched off and on. Listened to music without any title jumping problem.
2. Opened an audiobook and listened to it for a few seconds.
3. Went back to music (any album) - the Touch jumps over the first track.
This leads me to believe that listening to audiobooks (maybe just audible audiobooks) creates this problem.
I also found out that after starting to play the first track (which gets immediately jumped over or, more exactly, to its very end), I can "heal" the Touch (until I listen to an audiobook again) by pressing Pause, then the back arrow twice so that I jump to the beginning of the first track, then back to the album cover and track list. After that, I can listen to music as long as I want to without any skipping or jumping, as long as I don't play an audiobook.
To me, this sounds like a bug, but I can't tell if Audible or Apple is to blame. Besides, I don't see an easy way to contact Apple about a bug that might be related to their OS, which I find upsetting (they hide their contact adresses so well that you can't tell them about bugs in their own software, or you have to pay for expensive calls?).
Maybe someone knows what to do or has already heard about a similar problem. I try to circumvent a complete reset of my iPod, as I have lots of apps that are arranged into many different groups. I'd prefer not to sort all of them again, but if resetting the iPod seems to be the only possible solution, I would try that of course. Of course I'd appreciate if someone could tell me how to fix this or whom to contact about it.
Thanks (also for reading this long description),
Alex
Message was edited by: alexhager

Hi MikeSpike,
Thanks for your comment! Have you tried everything to resolve it, like resetting the iPod as a new device after deleting the IPSW from your computer first? Does the error still occur?
In fact, I cannot reproduce the problem using podcasts (they work fine for me, as far as I can tell there's no effect between podcast and music on my device), but it may very well be that the error is the same or a similar one (this would be for Apple to investigate, I'll forward parts of your comment to the Apple Advisor taking care of my case, if you agree).
Yes, it is the first track. Although I had one rare occasion where only track 2 was skipped and another one where tracks it happened to tracks 1 and 2 (no shuffle, no remember position activated), the highly reproducible issue touches track # 1 only.
Thanks for precising that you're using a BT headset. Could you please tell me which one, in case that matters? Has your iPod sometimes reacted weirdly when you used your BT headset to remote control the iPod, for instance skipping more titles than you wanted when you pressed "forward"? This is kind of what happened to me on my iPad and since then I've noticed the error appear on the iPad too.
Regarding your other issues, I cannot confirm the podcast problem where a podcast starts at some random point. Podcast seem to work fine in my case, but maybe all of this is caused by one and the same error. Let's hope Apple will find it all and fix it in an update asap.
Also, I don't have the artwork problem where an album displays artwork from a different album. I have had a case where a few tracks of one specific album (and just that one) were not displaying the artwork at all, although everything was properly tagged using the software MP3Tag. If you haven't reset your iPod (as a new device, not from the backup), maybe this would at least resolve some of your problems?
While my problem is just annoying for people like me who simply want their new device to work without any errors (even if there's an easy temporary fix or workaround to these errors so that I could live with it), your errors sum up to a nuisance that makes it hard to enjoy using the device. Having wrong artwork displayed with albums (or none at all) and podcasts being played at random positions is certainly not what you'd expect from such an expensive device.
Have you thought of contacting Apple about it? Not only might they have a solution for your specific problems, but it might also be more convincing if more people would independently report the first-track-skipping-issue we're all experiencing! What they need to know is that the bug is global, not just a corner case, and that it seems to be somehow related to their iOS. They couldn't afford ignoring it if several people would complain about this, especially now that a new iOS beta is already out!
Maybe some other users who read this thread have made similar experiences without paying attention to it? To all other forum users: would you please try if you notice anything weird like first tracks being skipped, either music or podcast? Maybe related to audiobook listening, maybe related to BT headset use? I'd be happy to forward any observation to Apple (to the existing issue case number) in order to better convince Apple to investigate this - asap.
Thanks again, MikeSpike, of course I will keep you all updated if I hear back from Apple!

LR 5.x crop tool bug: selection jumping on activation

Hi,
I did not see this reported, but I'd be rather surprised if nobody had noticed the issue before.
I'm seeing this behavior since I upgraded from LR 4 to LR 5. I think I did the upgrade with 5.3, but at 5.6 I still have the following problem:
After setting a cropping rectangle (usually with rotation), then change some settings (e.g. exposure, shadows, blacks, etc.) and then activate the cropping tool again, the displayed image jumps to the original frame size for half a second and then back to the previously set crop.
Since I usually go back to cropping only for small changes in rotation, this is especially annoying, because it irritates the eye in a way that I'm sometimes not even sure if I'm seeing my previous setting again. And then I have forgotten how I actually wanted to adjust the setting
This seems to me like a bug introduced in LR5. I'm using Lightroom since version 2 and never had this behavior until the upgrade to LR5.
I'm using Windows 7 Pro 64-bit, nvidia Graphics.
Steps to reproduce:
1) Open an image in the development module (I'm using Canon CR2 raws)
2) Set a cropping window
3) change some image settings, e.g. exposure
4) activate the cropping tool
Please fix this behavior.
Thanks,
Karsten

Thanks for the clarification. Too bad that the fix did not make it into LR 5.6.
I'm new here, so please apologize my beginners question: Is there a place where I can find bug reports that were accepted as known bugs? I tried the community search on cropping tool and did not find any related bugs.
Thanks,
Karsten

N81 BUG: date jumps to nearest event entry(date) i...

Hello folks,
I have the following issue:
After firmware update to 21.0.010 I found a weired bug: In may case I have a Calendar entry for 18 September of type "Anniversary" with alarm turned on for the same day (time 13:00) and I have noticed in the last few days (few days before and till 18 Sept) that my clock (date) start to jumps from current day (lets say that current day was 14 Sept) always and directly to 18 September any time I watch my phone in the morning (maybe there is something to do with the fact that I setup my phone every day to wake me up for the work and I also turn my phone off every night, so nobody bothers me till the morning when the phone turns on by itself and wakes me up).
This behavior wasn't there in firmware v20.x.xx, because the phone never behaved like this before for the other events.
Btw Network operator time (Clock's settings) is turned off, but I've also tried to turn on, but the behavior stayed the same.
I hope someone from Nokia team will see it.
V 21.0.010
My phone: RM-223
Nokia N81 (05.01)
Prod code: 0550138

Try to tap and hold for a couple of seconds in the day view, until you see a Green block appear. Once you see just let go anf you will see that you have an option to edit your event.

Lightroom 6 photo jumping bug

So I'm trying LR6 and I have this really strange and quite annoying bug. Whenever I make some action in Development module. A previous photo momentarily shows up, then screen jumps back to proper. See the video... any clues as to what this may be???

Please ask in the Lightroom forum. Look the forum up in the forums directory.

My iPhone 4S can't support camera 360 apps.Once I open the apps 3 sec it will auto jump out to the home page.Look likes the apps crashed.Isn't my iPhone problem or the apps got bug?Please help me.TQ

My iPhone 4S can't support camera 360 apps.Once I open the apps 3 sec it will auto jump out to the home page.Look likes the apps crashed.Isn't my iPhone problem or the apps got bug?Please help me.TQ

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Library indirect jump bug?

I wanted to get oratcl running and experienced "core dumps" all
the time. A bit of investigation indicated that the small code
snippets that essentially do jumps to the real code via
jumptables (in the client object libraries) will be relocated
with an incorrect offset into the jump tables (one off).
I patched the library binaries to handle this, and now it works
very well.
If this is a problem for other people, I do think that the Oracle
maintainers will easily find and fix the problem, based on this
info.
I am deliberately a bit unspecific about the details of my fixes,
in this mail, since the code is Oracle's, so I will not send
copies of my patched libraries to anyone, i.e: please don't ask
(unless you are Oracle Inc, of course...)
Bjorn Ekwall <[email protected]>
null

Sorry for following up on myself, but I just saw that there
already is a patch available (patch-2).
My only excuse is that I was in China when I discovered (and
fixed) the bug. Since I had some trouble connecting to Internet
from P.R.C. I missed the patch, and was too overcome by jet lag
to search carefully enough on this site, now that I'm back in
Sweden...
Bjorn Ekwall <[email protected]>
null

Flash 8 display 'jumping text' Bug after Blur filter

I think I found a display bug/glitch with blur effect in
Flash 8.
(I'm using the MC TWEEN actionscript method.)
I need to apply a blur filter to a Movieclip with dynamic
text.
When scrolling this Movieclip the text 'jumps' about causing
visual glitch
and a slow down...
I have tweened the blur filter back to 0 and I have also set
Movieclip.filters=[];
Has anyone else experienced this problem? Is there a fix?
Thanks,
David

mtaylor wrote:
> I see what's happening. It appears to be a width issue.
The underlines had
> been set to "hairline" but when they converted over to
Flash 8, the width value
> disappeared. Once I manually re-added the width value,
everything worked.
> Strange.
If this problem is reproducible, than submit to a bug list at
www.adobe.com/go/wish
Perhaps could be eliminated in future release.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Isolating / finding bug in CF and cflayout

Ok, I give up.
So soon?
So I am using cflayout, cflayoutarea stuff. And in my code I have a bug. But I can't find it. Why? Because CF10 is not showing it to me. It is hidden. Normally when outside a cflayout (or sometimes in one) instead of getting the huge usual error listing all over your screen, instead I get a sort of pop up window ...
Error retriving markup for element "element name": and the element name is the tab ... I am using nested cflayouts.
enable debugging by adding cfdebug to the URL. When I do that all I get is a red line telling me nothing else.
How does one determine what the problem is under such a scenario?

I'm also no (good) JS programmer. I use it when I have to. For mundane things.
That's not really an adequate situation to be in if you're a web developer these days. Especially if it means you need to use things like <cflayout> etc to do your work for you. You might have been able to get away with not knowing JS ten years ago, but not now. I recommend you do the courses here: http://www.codecademy.com/tracks/javascript and here: http://www.codeschool.com/paths/javascript.
What do you mean by "mark-up"?
htMl
they do make it easy with cflayout, yet I have also found so many annoying things it does! Like you cannot put a JS function call within one; has to be outside it or in another template. Yuck.
Precisely. Which is why you should get yourself skilled-up sufficiently to not need them.
Transferable skills?
Well put it this way: being adept at <cflayout> is not going to help you get your next job, even if it's a CF one (indeed you daren't mention it, IMO). However JS is pretty much an essential skill to have in the web market these days. You don't need to be a guru, but you need to be confident with it.
Adam

Software bug: iPod 5G jumps a menu

Hey!
I discovered the following bug:
From some artists I have one album plus a few songs which have no album name in their ID3-tag. If that's the case and you navigate through the menus "Music" > "Artists" > "(the artists's name)", it jumps right to the album's songs and you can't access the few other songs.
However, if say two of these few other songs have a album name in their ID3-tag, you can navigate again through the menus "Music" > "Artists" > "(the artists's name)" and then get to a menu listing all the album names there are from this artist plus the menu "All" where you can find all songs including those with no album name in their ID3-tag.
The Problem is, in the first case some songs remain lost if you haven't them in a playlist!
I guess only Apple can fix that with an update, right?
Is there any functioning way to tell Apple?
Looking forward to your comments
Greetings from Germany
Thorte
No Name Windows XP Pentium IV

Yes, this is a known problem.
The Problem is, in the first case some songs remain lost if you haven't them in a playlist!
You can go to Menu - Music -> Songs to view/play them.
A fix is to give them an Album name such as No Album Name.
Is there any functioning way to tell Apple?
http://www.apple.com/feedback/ipod.html

CFLayout - Jumping in IE -BUG?-

Similar Messages

Maybe you are looking for