Change description general ledger master data not possible for some languag
Hi all,
We have a lot of language translation on tab Key word/translation for all G/L accounts. English is our log in language. When we want to change the description in Finnish, Norwegian and Danish this is not possible (this lines are grey, only display mode). We can´t remove these lines and we can´t change them. It is possible for all other languages except this languages and English. Does anyone have a clue why this is not possible?
Thanks in advance!
BR L
Hi Lisa,
I was asking if you can maintain a new description (for an account number where no description in one of the mentioned languages is entered) so the message "Description already exists in language XX" should not appear in that case...
In general, account descriptions are stored (for chart of accounts / language key) in table SKAT thus you can check the entries already available.
Did you contact the user-authorization responsible which authorization objects are assigned? FS00 contains authorization objects for account auth. group (F_SKA1-BES), company code (F_SKA1_BUK) and the whole chart of accounts (F_SKA1_KTP), maybe some change authorization (activity 02) is missing?
Best regards, Christian
Edited by: Christian Ortner on Nov 22, 2010 1:06 PM
Similar Messages
-
Changes in Retroactive account time date not possible error
Hi
This employee is joined on date 20.01.1969 after that this employee prejoin on 09/04/2009 and we are trying to change the join date by using transaction code PA41. i am getting the below error message.
'Change in earliest retroactive accounting date time not possible!.'.
I checked the table (T569R) and i changed the value in Time evaluation fields like 01.01.1900 through table level after that I am not getting error message I am able to create the employee but I want to do the configuration level for that
Please provide me the step by step procedures do to the configuration.
before changes in table T569R
01 01 01.01.1990 Incentive wages
01 02 01.01.1990 Time evaluation
01 03 01.01.1990 Time statement
01 04 01.01.1990 Pair formation
after changes in table T569R
01 01 01.01.1990 Incentive wages
01 02 01.01.1900 Time evaluation
01 03 01.01.1990 Time statement
01 04 01.01.1990 Pair formation
Please help me to resolve the above issue.This error comes due to 2 dates set in the system
1> Employee level restriction - PU03
2> Payroll Level restriction - PA03
Since you are not going too retro (4/9/2009) so most likely it would be employee level.
Check his IT0003 and edit the dates using tcode PU03 or PA30 -> Utilities -> Change payroll status.
Also when you are trying to change the infotype, make sure you give the correct date as start date (04/09/2009)
Regards,
SC. -
How make master data object available for ACR
Hi,
I remember that there is a program to run so that we can make the master data object available for ACR.
i am not getting the program name. Please advice.
Thanks,
DevHi........
If a master data is schedule for some changes...ie InfoObjects and hierarchies that are planned for structural change are selected by default.........If u go to RSA1 >> Administrator Workbench >> Tools >> Hierarchy/Attribute Changes from the menu...........If u click on Infoobject List or Hierachy List.........u will find that those infoobjects r already selected.....
If u want to run ACR for some infoobjects manually.............either u can do it in RSA1..........by only selecting those infoobjects for which u want to run the ACR..........or u can also use the prog : RSDDS_AGGREGATES_MAINTAIN.........
If that Particular infoobject is not there in the Infoobject or Hierarchy List in RSA1..............that means no structurak changes r required...........no need to run ACR..........
Regards,
Debjani......... -
Item descriptions update on Master Data
Hi there,
Item descriptions update on master data does not get read into existing sales orders and subsequently when delivery dockets and invoice are generated, they are all not updated. Could the SAP programmer analysts please fix this bug? thanks.
Similarly if item's GL account is set by item group and the item group is changed after an item is processed on sales order, the change in GL posting is not reflected when invoice is subsequently processed. Please also fix this bug, thanks.Hi Amy,
for both issue nothing to do from SAP MDM side, You need to take help of SAP Technical Consultant(Programmer) which analyst the problem and fix it for e.g. SAP Notes updation for program or assign/change SAP standard program for message type etc.
Thanks,
Jignesh Patel -
How to change the general Ledger of a purchase order in mass
Hi,
In our company, we change the General Ledgers, then, and we have plenty of purchases orders take the old general ledger, we want to change this general ledger by the new in each purchase order in mass.
I found in BAPI, customizing, in user exit, I tray with the transaction MEMASSPO not solution.
Can you help us for change the General Ledger in the purchase order in mass?Hi,
You ask ABAPer to write a program in that program you give one text file as input with old GL and new GL corresponding to that old GL so that the program will replace it with new GLs.
firat extract all POs which you want and give those PO numbers and GL text file as input in this program and execute -
Transporting General ledger master record to QA server-urgent
Dear all,
Can anyone say how to transport General ledger master record to QA server?
I will award good points.
Thanks in advance.
Regards,
ArHi
Using TCODE : BD18
Use the Message type GLCORE / GLMAST to upload
you can transport the GL master data - - - this is through the ALE set up. ABAPer has to set up the ALE set up
As a testing part before setting up the client you just try this in the sending server you will get created with IDoc for the above Messge type
VVR -
All Master data not displaying
Hi all;
I am tring to create Hierarchy for some values for one master data object.
Here is the issue:
If I go to the RSD1 > 0costcenter > maintain master data > If I execute with maxm hits I get let's say 200 records for that master data But If I enter some value which is there in the master data instead of the execution it's not displaying anything.
Same thing I am trying to create Hier for those cost centers but in the hier maintaince window when I enter that costcenter it does not display anything...and I check in Maintain Master data for 0costcenter those value are there when i execute all but don't see again if I give that particular value and execute.
Any reason...
Thanks.Hi simon;
I checked that table and all the entries are version 'A' and I also saw there the ones that are not coming while creating hier are active as well. I also checked tcode RSATTR and there is nothing left for change run., this is production env,. and we do change run every night after the process chain.
Thank you for you reply do you think anything else because those some master data not populating...on selection? -
Updating license data not possible [Maintenance Package]
Hi,
I want to activate Automatic Maintenance Certificate Renewal via solution manager system as per SNOTE: 1280660.
SOL MAN: ST400 SP 18
SCM : ST-PI 2008_1_700 SP 01
when i run Maintenance package in my managed (satellite) system i got the log as below.
Updating license data not possible [Maintenance Package]
No active master Solution Manager destination maintained. [Maintenance Package]
Updating license data completed from destination [Maintenance Package]
Maintenance Package completed
when i run Maintenance package in my Solution Manager system i got the log as below.
Refresh sessions from destination SM_KSMCLNT000_BACK started [Maintenance Package]
> error reading function module interface DSWP_API_SESSIONLIST_GET from SM_KSMCLNT000_BACK
> Logon not possible (error in license check)
> Sessions cannot be refreshed from destination SM_KSMCLNT000_BACK ( KSM , 0020472195 )
Refresh sessions from destination SM_KSMCLNT000_BACK finished [Maintenance Package]
Refresh sessions from destination SM_KSMCLNT001_BACK started [Maintenance Package]
> error reading function module interface DSWP_API_SESSIONLIST_GET from SM_KSMCLNT001_BACK
> Logon not possible (error in license check)
> Sessions cannot be refreshed from destination SM_KSMCLNT001_BACK ( KSM , 0020472195 )
Please anyone facing the same or related issue, give me a suggestion..
Thanks,
Manikandan BHello Manikandan
The error indicates that there is an issue with the *_back RFC destination
itself.
Have you done an authorisation check within SM59?
Utilities > Authorisation check?
You can also do so by testing the connection in SDCCN.
Goto > Taskspecific settings > RFC destination > Backdestination
This problem is often caused by the user in the RFC connection
being locked in the Solution Manager.
Make sure the RFC user account is a communication user so the password does not expire. Sometimes the password expires and the RFC user locks the account as the old expired password is provided too many times.
The message also indicated "No active master Solution Manager destination maintained"
Please make sure the relevent Solution Manager system has been marked as Master in SDCCN Goto > Taskspecific settings > RFC destination >
These are things you will want to check.
I hope this information helps you resolve this problem.
Regards,
Paul -
No view of the changes of Customer /Vendor master data
Hi Experts,
I have a problem, when I run the standard report to view the changes of customer/vendor master data, I don't find the change relative to a bank account .
I found in the report the technical field that the user has changed, but I haven't found the text of the data in the tab "bank account".
Can you help me, please?
Thanks in advance.
Best regards
GiampaoloDear Ram,
thank you for your answer , but my problem is still present. If I want to see the modify of the Customer/Vendor Master Data for the Payment transaction Data details, I don't try this information in the TCODE FD04.
Do you know a different report or TCODE that I can use?
Thank you in advance.
Best Regards
Giampaolo -
After Successfull Load ETL for General Ledger No data showing in Warehouse
After Successfull Load ETL for General Ledger No data showing in Warehouse Tables
DB Version # 11.2.0.1.0 and OS of Warehouse Microsoft Windows Server
2003 R2 Enterprise Edition Service Pack 2, v.4922
1. BI Apps version
Release 7.9.6.3
2. BI Apps module
Financials
3. Source system and version
EBS R12.1.2
Please help me out .......Hope you have done finance config as per the link
http://docs.oracle.com/cd/E20490_01/bia.7963/e19039/toc.htm
List out the tables with row count=0, get the sql override query and execute in source to see # records for tables ending DS or FS where row count=0
do the same for tables ending with _D using warehouse db.
If fact tables are getting 0 records check the w_day_d table.
let me know updates.
If helps pls mark. -
BW Master Data archiving - possible?
Dear Experts!
I have a question, regarding SAP BW archiving. Is master data archiving possible in SAP BW 7.02? If it's possible, what is the solution for that?
Tkanks in advance!Hi,
I am thinking about creating a "twin" object of the one that you want to archive (identical).
Once create, refresh the new object with the information that you want to keep, and dont refresh any more.
But if you are interested in doing several archives and keep the data within that object, you can create a new field within the new Twin Characteristic as "key field" to store the date of when you do the archiving.
I hope that it helps! -
Material ledger mixed invoices not possible
Hey Masters !
I'm a vendor and I have been getting the below error's message every time that I try to submit/upload an invoice via the customer's supplier portal :
" material ledger mixed invoices not possible "
Actually , for every purchased item in a PO/Service Order there a SES # (Service Entry Sheet) is generated .So, would anyone kindly advise ?! .
Respects,
FaresHello,
I have got solution.
While performing MIRO, I had taken items in PO belonging to 2 different plant. For one plant material ledger was activated, and for another plant it was not activated. I have posted 2 different invoices to solve this.
Thanks
Ram -
Sales order change allows shipping point | plant combination - not possible
A sales order was created and all lines defaulted to the correct shipping point for the plants.
Subsequently, one line's shipping point was changed to a shipping point not possible for the plant, i.e, no assignment exists for the shipping point and plant. There were no checks to validate the change. Thus, the sales order was saved with the bad shipping point for the plant (non-WM).
The delivery was created with two lines for plant (WM) and one line for plant (non-WM).
The solution was to manually delete the non-WM plant line from the delivery and. Next, correct the plant (non-WM) to the WM managed plant and create a new delivery.
Why did SAP allow the order to save with bad shipping point - plant combination.
Thank you in advance for your assistance.
lotjjonWhy did SAP allow the order to save with bad shipping point - plant combination
Definitely, standard SAP won't allow you to change the shipping point unless, it is assigned in OVL2 as already pointed out. Check whether this issue is there for all plants / shippint points or only in that document, this issue has happened.
G. Lakshmipathi -
General ledger transactional data extraction
Hello all,
My client has a need to extract all the general ledger transactional data from SAP system to an external system ( to a hard disk or to a DVD) for future audit purpose, how can we achieve this,
Please give your valid inputstables BKPF & BSEG cover everything.
might be better to use reports RFBELJ10 or RFHABU00
depends what they want to see -
Posting is not possible for the specified company code.
Hi SRM Gurus,
We have a four company codes in our org.structure and if we try to post manual invoice for a particular company code with its currency, we are getting this error :
"Posting is not possible for the specified company code "
We have all company codes defined and inherited for the particular user in BUK and we get all the company codes in the F4 help of this user in BBPIV02 -->Basic data.
Any suggestions pl.
I doubt this particular Cocode is deactivated for invoice posting in backend. Is it possible ?
Kindly suggest.
Reg.,
Sridhar.Hi
Which SRM version are you using ?
Are you getting this error for a praticular company code only or for all the comapny codes ?
<b>Please read this -></b>
Since you are trying to create Invoice with PO did you check the Vendor Root there is a attribute for company code. Please maintain the same, if not maintained.
Refer the link below for details.
Re: Company code for system missing in user attributes
<u>Other related links -></u>
Try to change the chart of acct info in OBY6 for a company code that was copied from SAP template, there is no Financial posting or any other posting in this company code.
Re: Posting Period Error in Confirmation
Hope this will help.
Regards
- Atul
Maybe you are looking for
-
Copying Files to Server is Slow/Saving Corrupts the file
I am running 4 computers in this system. 1 G4 Tower Running OS X Server 10.4.11 There are 2 drives in this computer. 1 is the system drive, the other the file drive. 1 Mac Mini Running OS X 10.4.11 1 G5 Tower Running OS X 10.5.2 1 PC Running Windows
-
I try to log into my Apple ID and it says that it has sent an E-Mail to my Apple ID to vertify that it is me, I understand that but what I don't get is that I can't get onto my account to click open the E-Mail to vertify myself. Any Help? This is on
-
Workflow: Camera - Aperture - iPhoto
Hi there, some questions regarding the workflow that I use. Like everything, it has its ups and its downs. What I´m trying to do - of course - is to eliminate the downs. Please feel free to comment. 1 - Shooting in RAW I use a Nikon D200 for photogra
-
With SSMS Can a user with VIEW DEFINITION permissions on a procedure, see its source?
Is there a way directly within the GUI itself to see the definition of a procedure if a user has VIEW DEFINITION permissions (as well as EXECUTE), or will they need to use sp_helptext?
-
Field Export Order to Spreadsheet
My form has a middle section that at times is hidden and sometimes is visible depending on what selections the users make at the top of the form. When exporting the data, Acrobat puts the data from the lower section of the form in the middle of the s