Changes in Project

Hi,
I wanted track down the changes in a Project (Project System Module). which Tcode or Report is available on the system to track all changes in the project.
Thanks & Regards
Subrato Chowdhury

Hello!
Try with transaction cn60.
Marko

Similar Messages

Is there a way to change the project timecode in FCPX?

Is there a way to change the project timecode in FCPX? So that my sequence can start at 01:00:00:00 or am I stuck
with it starting at 0?

I guess you could, but that would be an hour long gap clip before your sequence which would make for a very
unweildy sequence. Especially since this cut will be only about a minute.

How to restrict the user to change the project structure but not the documents?

Hi,
I have created one project assigning different users in Solution manger. I want to risitrict some of the users to change the project structure but simultaneously allwoing the project documents to be created, edited or deleted using solar01 under Project documentation tab. For that I have followed the steps provided in the follwoing link.
http://wiki.scn.sap.com/wiki/display/SM/Howto+Restrict+Changes+to+Project+Nodes+to+Assigned+Team+Members
I am able to restrict the users to change the project structure, but I am not able to allow access to the project documents. It gives me the message "You are not authorised to change the project". This fulfills my one of the requirements. But, Is there any way to restrict the user to change the project structure but not the documents?. Any help will be apperitiated.
Thanks,
Rutvik Uapdhyay.

Hi Rutvik,
Basically there are 2 different authorization role ...you should look for and customize as per requirement in Z* namespace.
role - SAP_SOLAR01_ALL
this take care of objects in Solar01 like tab access etc
role -SAP_SOL_KW_ALL
this takes care of entire documentation within solman
hope this helps
Regards
Prakhar

How do I change a project's name?

In the manual I followed the instructions below but it doesn't work. If I double click on a project name in the library, it just opens the project (in other words, the text of the name can not be edited). If I single click on the name of the project, it doens't do anything. The manual says I should be able to change the project name. Also, when I duplicate a project, it doesn't give me the ability to enter a new name. It just creates a new name and doesn't let me change it. Please advise. Thank you!
Rename a project
If the Project Library is not already open, click the Project Library button at the bottom-left corner of the Final Cut Pro main window.
Select a project, and click the project’s name to highlight it.
Type a new name in the project Name field, and press Return.
Depending on how you have the Project Library organized, the project’s position in the project list may change after you rename it.

Thank you.
This solved my problem.
Seems like sometimes it takes so long to render stuff in the background that you cant do much work till it is finished.

Prevent a user from changing the Project ID in P6 EPPM 8.3.7

Does anyone know if there is a Global or Project Security Profile privilege that will prevent a user from changing the Project ID on an existing Project? We are using Primavera P6 EPPM 8.3.7
Thank you,
Eric

Hi,
Below project security profile may help you,
Edit Project Details Except Costs/Financials
Determines whether the profile will enable users to edit fields in General, Dates, Defaults, Resources, and Settings tabs in Project Details. To assign a project baselines, users must also have the "Assign Project Baselines" project privilege assigned to their profile.
Regards,
Marcos

In Premiere Pro, is it possible to change the project aspect ratio once started?

In Premiere Pro, is it possible to change the project aspect ratio once started?

On a side note, 'projects' do not have as aspect ratio, sequences and footage do. And a project can contain any number of sequences or footage.

Change of Project & WBS Element Definition

Hi,
Could you please let me know is there any function module to change the Project Definition ,WBS element Definition for an already existing Project and WBS element.
Regards,
Hemu Saini.

BAPI_BUS2054_CHANGE_MULTI for WBS
BAPI_BUS2001_CHANGE for Project
Regards,
Chandra

Impact of changing a Project Name on PWA 2013

Hi Ladies and Gents
I know that if I change the project name of a current project on the Name field on the PDP it will update the Project Plan name. I also know that I need to change the project site name and I know what the workaround is to ensure that the project plan still
associates with the project site.
What I want to ask, is there any other impact to historic data if I make a change to the above
Have an awesome day
Willem

Hello Willem,
Changing a project name will be fine as the system works off the GUIDs. Test this process on a test project before so that you are satisfied this works for you.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

How can I set which projects use Proxy Media and not just change every project?

Hi there
I can see how to change ALL projects to use Proxy Media or Original/Optimised Media
in
Preferences>Playback
But I'm switching between projects a lot and I only want to use Proxy Media on one project, so how can I tell FCPX to only use Proxy Media on that ONE project?
Thanks

Perhaps if apple didn't take back prores LT this wouldn't be as much of an issue.
Pores LT was a great compromise between file size and quality. It produced a fine image for most peoples needs and was 30% smaller.
Hopefully it will be returned soon. I can't imagine why it's not already there. Unless they want to charge for it, ... again..
Have you tried capturing as full res, then change prefs back to proxy, open a new project and import the full res files?
In FCP7 the render pref was separate from the capture pref. is that gone too?
If my idea doesn't work, Surely someone will chime in with a creative work around to this.
And hopefully it'll get fixed soon in an update.
Best,
g

How to change iMovie Project from iSight to DV-NTSC?

I noticed my iMovie project says it's an iSight project, meaning everything will be converted to motion-JPEG's on export in full quality. But my project has both DV and MJPEG clips and I prefer to export my DV clips untouched, not converted to MJPEG. If the project was in DV-NTSC mode, DV clips would be exported untouched. (The MJPEG would be converted to DV but I don't care about that.)
How do I change the project type from iSight to DV-NTSC?

Yes, there is always that option. However, I want to make sure that when I export a DV clip to a DV file, it will be exported untouched. If iMovie is in MJPEG mode, I'm afraid it might convert the DV clip to MJPEG and then back to DV.
It doesn't matter now since I've figured out how to switch between iSight and DV-NTSC modes. You can't do it in the application, but you can if you edit the iMovie project file itself. Towards the end of this file look for either ISIGHT or DV-NTSC. If it's not the one you want, replace it with ISIGHT, if DV-NTSC, or DV-NTSC, if ISIGHT.
Why is it important which project type you have? I've learned that video effects like transitions and fades are done in the default format iMovie has selected for your project. So if iMovie labeled your project as iSight (MJPEG), then all of your subsequent video effects will be rendered in MJPEG. If iMovie labeled your project as DV-NTSC, video effects are rendered in DV. This is important to know because effects rendered in a clip's original format are rendered much faster and may look better than if they weren't. So if you have a DV clip you wish to apply an effect to and the project is recognized as MJPEG, rendering the effect will likely be slow and the results may look bad.
This is just another annoying quirk that I've discovered during the course of editing a project. Seems like once I've figured out all the quirks of a particular version, another comes out with a new set of quirks.

I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.' Where exactly is it located?

I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.' Where exactly is it located? Here is the link which gives the instructions but doesn't seem to say where the 'Modify Settings Button' is located: http://support.apple.com/kb/PH12526?viewlocale=en_US

You have to choose – one settigf or another.
The thing is.your HD clips will look better in an SD project than your SD clips will in an HD project.
WIthout knowing much more about your project and the kind of content, it's really hard to be specific. But generally I'd let my project settings be guided by what fraction of my timeline will be made up of HD clips and how much SD clips. If it's 75% HD, I'd probably do an HD project…and so on,
Good luck.
Russ

How do you change the project calender

How do you change the project calender without changing the individual existing activities?

Hello,
To modify an existing calendar, go to Enterprise > Calendars. Then click on the calendar to modify and hit 'Modify', and make the desired changes.
To assign a different calendar to an activity, click on that activty, go to the General tab in the Activity Details on the bottom of the screen. Under the General tab, on the right hand side, there is drop down menu for Activity Calendar. You can change the assigned calendar for that activity with this menu.
Hope this helps!

Can I update imovie without changing my projects in imovie that haven't been published?

Can I update imovie without changing my projects in imovie that haven't been published?

Jimmyalford,
I am having the same exact problem that you describe. Can't figure it out. I've got a really high speed signal, too. No luck.
GeeD, I do not have macKeeper installed. And I am running iMovie 10.0.2.
I hope someone can shed some light on this.
Thanks all....

Global Calendar Changes Affecting Project Calendars

How do you prevent Global Calendar changes from changing the Project Calendars? When Project Calendars are created, they are copied from another calendar, say Global Calendar. Now, when the Global Calendar is updated or changed it changes my Project Calendar. How do you prevent this from occurring?

If the change to the Global Calendar is valid, it IS going to impact all local schedules. The Global Calendar is the basic Enterprise assumption. It is what contracts are written around.
If the projects are using a Global Calendar they are going to forecast the calendar, but a resource's calendar can allow performing a task anytime in the operational plan. That is the nature of high level settings and local or operational variants. Project execution is not nailed to the Global Calendar, Your original schedule forecasted from the Global structure and was accepted. If experience leads you to make change in the Global Calendar, that is reality. You will forecast the added knowledge gained from experience and set in the Global Calendar. If it creates Risk in the existing projects, deal with it locally. You record dynamic adjustments in the Actuals. You forecast local results from to-date actuals and local resource calendars. Management 'is' overcoming Global problems with local resources.
Leave the Global Calendar alone for operational exceptions. Remove exceptions from the Global Calendar. The Global Calendar is for planning. That Global Calendar is still the basic assumption, despite operational problems in your schedule. If the Global Calendar has a holiday, the projects it is assigned to forecast the holiday. Simplify your Global Calendars to match basic, high-level, factual assumptions.
Let your Resource Calendars forecast the detail of operations and overcome the Global Calendar. But actualize what happens no matter what any calendar says so calculation is up to date.
Calendars are strictly for calculation, for forecasting. You can always log progress on Christmas or during Ramadan, just as you logged no progress during the hurricane. But Joe Labor Unit will not forecast performing his task in NYCNY on even a regular Monday if his calendar has him training in Borneo. Cancel Joe's trip and change his calendar. He is available in NYCNY on the date you want now. His forecast changes, the project forecast changes. Primavera is perfectly dynamic. And the project will not forecast work on Christmas or during Ramadan if the Global Calendar says these are exceptions to your usual M-F 8-5 with an hour for lunch. Global Calendars are the sub-structure that we accept in building the initial, accepted Project Schedule and that provide the framework we analyze Risk mitigation around in operations.
"We're forecasting a late finish now due to the hurricane." "Schedule the workforce to work through the Christmas holidays." (adjust, adjust, adjust) "That brought completion in." The Global Calendar assumes no hurricanes and getting Christmas off. After the hurricane, the PM sets the operational guideline. The Scheduler adjusts the resource calendars to overcome the hurricane period's lost progress. As soon as the As-built has the adjustments, the schedule calculates and forecasts completion on time. The workforce is not scheduled to work Christmas in the Global Calendar. In their Resource calendars, now they are. The schedule forecasts work at Christmas. You mitigated the hurricane risk by overriding the Global Calendar with Resource Assignments. If you make those Resource Calendar Christmas adjustments in September when the hurricane hit, you will forecast project completion on time in the next report from P6. You pull completion back to the left after operational realities pushed it out to the right.
The original schedule is Art- planning, compromise and commitment. The ongoing fine-tuning and manipulation of As-built detail makes Art a Masterpiece by giving the heartbeat of the project and implementing the vision of its manager. Or not..

How to change the project type of inprogress project

How to change the project type of in-progress project, The project type is Testing and need to change it to basic project plan.

Another way is to click on the top right button of the project center ribbon, after selecting the project. Note that this way works for one project at a time whereas toon's reply works for bulk edit.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Payment Term changes in Projects and AR

Hi,
Currently all our projects are based on single agreement. recently we had to change the payment term for a Customer. Our Receivables group made this change in AR. We were expecting all the Projects invoices would pick up this , when they are interfaced to AR. But later we realized that the Project invoices go by the payment terms within the agreements.
Again, we created a tar and Oracle suggested that we end date the current agreement and create a new one to match the payment term. But the issue is we have 20000 projects and if we want to change the payment terms in mass, then we need to create 20000 agreements and also, in the future , when accounting changes the payment term, the proejct manager may not know, the term has been changes and to change it in the agreement.
Is there a more practical solution for this issue.
- Vasu -

I will suggest another solution if you are in a version that allow you to define Forms Personnalization.
Instead of updating the transaction in AR Interface table, you can, for instance :
- enter a payment term for each of your customer at the header level (table hz_customer_profiles, condition site_use_id is null) ;
- create a Form Personnalization in the Customer Window, so that the Payment Terms is mandatory at the header level ;
- create a Form Personnalization in the Agreement Window, so that once you enter a new Agreement for a customer, the Forms Personalization retrieves automaticaly the payment terms set up for your customer accordingly
We implemented this solution and it works fine too.
Available for any question about it.
Xavier

Changes in Project

Similar Messages

Maybe you are looking for