Changing the Receive Handler

Is it possible to change the the FILE Receive Handler from 32 bit to 64 bit of the running application? Because I receive a File which is extremely large in size, it is taking so many days to receive the File from the receive location. I wanted to change
the FILE adapter with 64 bit receive handler, since it is production I am concerned to stop the application and change the handler. Does it affect the process.

Hello,
All components of BizTalk works on streaming concept. As per your requirement you are not using any internal feature of BizTalk for message processing. Then you have to think for other solution as you are just using custom pipeline for file transfer. If
you are planning to implement any pipeline for handling large file, it is always good to go with streaming concept rather than reading the data.
Yes you will get some performance boost by using 64 bit host, which does have a slight performance overhead. As you are using 64-bit OS and BizTalk it is advisable to use 64-bit host instances for better performance. But there can be limitations with some
adapters and components (like FTP, BAM) and only run on 32-bit, in this case you can go for 32-bit host instance.
You can test the transferring of file using passthourgh pipeline. I think so you will be able to transfer file in hr rather than few day. As you are only transferring the file BizTalk will read only chunk of data at a time. But the only drawback to
it you are going to publish message in BizTalk. And BizTalk is not built for file transfer.
http://social.technet.microsoft.com/wiki/contents/articles/30763.streaming-concept-in-biztalk-part1.aspx

Similar Messages

How do you change the Received: From in the message header to correct external address

We have trouble every so often sending a message to customers will get a bounce back. Basically it is using our local internal name (mailserver.local) instead of our External name (mail.domain.com). We have a pretty
simple setup one Server (no edge server) with and SSL certificate. I went in to the Hub Transport setting and made sure the FQDN was mail.domain.com and it was. I have read on the subject some people suggest getting your ISP to create a pointer
record for the IP to the internal name. That will not work for us, because we may be changing ISPs in the near future.
I included a bounce and current header info.
So is there a way to change the "Received: from" server name to our external name?
Bounce Message
Generating server: mailserver.local
[email protected] TUK-UTM.theirdomain.com #550 Invalid RDNS entry for 96.43.XX.XX ##
Message headers
Received: from mailserver.local ([::1]) by
mailserver.local ([::1]) with mapi id 14.01.0438.000; Fri, 9 Jan
2015 11:35:19 -0600
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: test1 <[email protected]>
To: test2 <[email protected]>
Subject: test 2
Thread-Topic: test 2
Thread-Index: AdAsMp9XJVDQap4vSC6OcUEejnFNCw==
Date: Fri, 9 Jan 2015 11:35:18 -0600
Message-ID: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-Exchange-Organization-SCL: -1
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-MS-Exchange-Organization-AuthSource: mailserver.local
X-MS-Exchange-Organization-AuthAs: Internal
X-MS-Exchange-Organization-AuthMechanism: 04
X-Originating-IP: [192.168.XX.XX]

The error message states the reverse DNS entry isn't valid. I agree with Willard that setting up an SPF record will help your overall spam score from receiving hosts, but in this case it should simply be resolved by configuring a reverse DNS.
Receiving mail hosts on the Internet usually care most about the IP that's connecting to them. One of the most common tests is the reverse DNS (since the SMTP connection comes from 96.43.X.X, the receiving host will ask itself "does 96.43.X.X really
belong to the TUK-UTM.theirdomain.com ? and will go and check for PTR records for 96.43.X.X) It's this check that's failed.
Even if you'll be changing your ISP in the future, you would still have ownership for your DNS domains, right ? It should be your company paying for this service after all.

I wana change the receiver E-mail address for security answers . How can i ?

I wana change the receiver E-mail address for security answers . How can i ?

Hi Mohammed,
You can change the Rescue email address by logging onto your Apple ID at:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Of course, if you do not know your password, and it is asking you to answer your security questions right now, then you can't do that....
Cheers,
GB

To change the receiver port name

Hi ,
I am doing a File to IDOC scenario.
We have a requirement to post IDOC flat file to the IDOC in SAP system through PI.
We have Partner Number in control record which we receive in the flat file and that has to be sent to the SAP system which we have achieved by checking the " Apply control record values from payload and take sender from payload" option in the sender communication channel.
But we are having a requirement that the PORT number should be taken from "SNDPOR" segment from the Input file. But when we process the file through PI, the port number changes as "SAP*** ".
Is there any way that i could post the value from "SNDPOR" segment as the port number to the SAP system.
Regards,
Vishal

Hi Vishal,
You can change the port details in Message mapping and use the IDocs adapter with the same option as you have now.
Regards
Suraj

Change the Error handling in DTP

Hi Gurus,
In the update tab it was 'No Update,No Reporting' and the Version was Active and green. I Chnaged it to 'valid RecirdsUpdate, No reporting (request Red)' and saved it . It is now green and active.I clicked on create Error DTPs. I am done with my issue and so want to change it back.I deleted the Error DTP.But now I can't change it back to 'No Update, No Reporting'
It is now green and active but the error Handling now shows 'Valid Records Update, No Reporting (Request Red)'. How can I change it back to 'No Update, No Reporting'? I tried to change it and save it but it is then showing Version Revised and is yellow. Please suggest.
Thanks
Prasad

Hi Prasad,
When it says "Version Revised" and is yellow it means its not in active version . Please activate the DTP again by changing it to No update no reporting . It will be fine then.
Regards
Venky

Changing the Receiver BI Client No.

Has any one tried changing the BI Client No in the Receiver when using the "initial reduction scenario".
My scenario is this
Sender BI Client 200
Receiver BI Client needs to be 300 .
I have done it with ECC and CRM but never tried for BI.
Let me know if there are any issues with this sort of setup.
Regards
AnoopKrishnan
Edited by: Anoop Raveendran on Jul 30, 2010 12:55 AM

Thanks Guys,
Here is what i did
1) Changed the client in BI through the options in the TDMS initial reduction scenario.
2) After the above mentioned client copy was complete I changed the BWMANDT column in table RSADMINA to point to the new I client created
3) Ran BDLS in the all the BI source systems (to change the BI logical client entry) which were to be connected to the New BI system
4) Ran BDLS in the BI system
a) change the logical system name for the BI system
b) change the logical system name for all the source systems connected to BI (In my case the source systems were also different than what existed in the sender BI system)
5) You might have to restore the BI system as well through RSA1. This is because when we chang the target client all the partner profiles(available in WE20 transaction) and Port Definitions (WE21) were missing in the New BI system.
6) Then Restored the all the source sytem connections through transaction RSA1.
Along with this i did the regular Post-Installation Steps of System Copy and Client Copy.

Changing the receiver cat in the settlement rule of Product cost collector

Hi,
I have created a Product cost collector using the Transaction - KKF6N. and observed that the settlement rule got created automatically with the CAT - MAT. I need help for below queries.
1. Is it possible to change the settlement rule for the Product cost collector?
2. If yes, Could you please let me know the procedure to do this?
3. If no, what is the alternate as I want to change the CAT from MAT to ORD.
Your help is very much appreciable and Thanks in advance for the help.

Hi,
Check in order type, Which settlement profile is maintained. Then Goto settlement profile maintain receive type which you want to settle.
Regards,
Sreekanth

Changing the receiving partner in idoc (Outbound SALES ORDER)

Hi All,
In my scenario Sales order (ORDERS) outbound is created and it should send to Delivering plant not to the Sold-to party. how to do this in partner profile? Is there is any coding should be written?
Thank you in advance,
Adithan S.

Hi,
Aveek is right, you only option is to use partner type 'LS'. So you need to create logical systems for these delivering plants, but since setting up 'LS' as the partner function for all the customers requires lots of illogical customizing changes and master data changes, I suggest that you use 'ALE' medium instead of 'EDI'. So that all you need to do is maintain distribution module for any one of these logical system so that output type processing can take place. Later you can use exit 'EXIT_SAPLVEDC_001' to change control record (change recipient to delivery plant).
Cheers,
Sanjeev

Changing the event handler format

Hi,
on a custom SGD web frontend that I write, I create some client-side event listeners like that:
eventsView.registerClientSideEventListener(IConstants.SESSION_EVT, "http://host/handler", "_top", "<listenerID>");
When the event is caught by the SGD client helper, a URL like this is opened in the browser:
http://host/handler?name=EmulatorSession&action=added&data=
Is there any way to customize this URL? To be precise, I want to use the hash and the hashchange event to prevent the page from reloading and "flickering". Is this possible? I mean - without using frames?
It is working when I set the handler URL to "http://host/handler#". So the event URL will be "http://host/handler#?name=...&action=...
But it would be nicer to be able to customize it. Maybe to something like that:
http://host/handler#event/EmulatorSession/added/<data>/
http://host/handler#event/EmulatorSession/removed/<data>/
Any help is appreciated!
Thanks
Danny

That happens when the stylesheet (.css file) doesn't download for some reason - or takes too long.
You can simulate it with View >Page style > No style
Try control-F5 to reload it into cache. Is is being blocked with something - like an add-on?

How to change the input language ?

Hello,
I am writing an Add-on that needs to change the input language when the user
clicks on the Item Code field ("5") in the "Item Master Data" form.
I can perform the change when I am out side of the SAP application (for example if I create a Windows Form), however I cannot control the input language of the SAP itself through code.
I even tried using Application.Sendkeys, however I was unable to send a combination of ALT+SHIFT, or at least it did not have any affect
Here is the code on how to change the input language on a Windows Form:
For Each Lng As system.Windows.Forms.InputLanguage In system.Windows.Forms.InputLanguage.InstalledInputLanguages
   sValue = Lng.Culture.DisplayName.ToUpper()
   If sValue.StartsWith("ENGLISH") Then
                    system.Windows.Forms.InputLanguage.CurrentInputLanguage = Lng
                    Exit For
    End If
Next
Any ideas ?

I am not sure I understand the problem. Anyway in B1 you change the language by
changing it from the Administration module. This raises a Application event that
is sent to all the add-ons. The event is aet_LanguageChanged and you should
then change the language handled by your add-on when you receive it.

TCP/IP Receive Handler Properties of TCP/IP Handler

I want to change the Use Blocking Sockets property of TCP Receive Handler but I am getting the following error in the screenshot:
Did anyone face the above error ?
I am using codeplex TCP/IP 2010 adapter.
Prakash

Hi Prakash,
With this adapter, this issue of error while changing the adapter handler properties is not jkust for "Use Blocking Sockets" but also to any other properties. Have just tried to update the other properties in adapter handler? I have it now and
I am getting the same error as your but while changing the values of any of the properties. Not just for the properties of Receive Handler but also for send handler. It’s for all the handler properties.
I think the issue is with the setup package. Its missing some of the dependant assemblies. One option I can suggestion is to rebuild the code and do the adapter deployment manually (or simply try by GACing all the dependant assemblies to start with)
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Extended Notifications: how to change the URL link

Hello,
We are on ECC6. We use Extended Notifications to alert users to the presence of new workitems, but when they click on the link to execute the workitem, they're presented with the login screen.
We have been able to send emails from workflow which contain a link that does not ask for a login so I know which URL to use. The problem is, how can you set the URL in Extended Notifications? How does it decide which URL to use? I've tried changing a few General Settings in SWNCONFIG, none of them made a difference.
Any hints, tips, suggestions would be appreciated.
regards
Rick Bakker
Hanabi Technology

Hi Rick,
I wrote my own notification handler to solved an link issue (wanted to point to a specific iView url). I changed the notification handler via Category and double clicking on the category:
Scenario                        WORKFLOW
Category                        ZCATEGORY
Description                    Adobe Administrator
Requested Reliability          0 Undefined
Collective Message             A Grouping with Othe
Notification Priority          5 Medium
                               Delete After Send
Category Handler               CL_SWN_CATEGORY
Notification Handler           ZCL_SWN_NOTIF_WF
Handler for User               CL_SWN_USER_STD
Have a look at some of the methods:
LOAD_INSTANCE_WA
ADD_LINKS_ACTION
ADD_LINK_ACTION_DISPLAY
ADD_LINK_ACTION_EXECUTE
ADD_LINK_ACTION_DECISION
CREATE_ACTION_ATTACHMENT
CREATE_INBOX_ATTACHMENT
Hope it helps you understand how the link is created.

How do I change the midi staff style from piano (i.e. bass and treble clef) to a drum score?

Is there a way to change the staff style in Logic Pro 9 from piano to drums?
In the score window I have tried selecting layout then staff styles... then clicking the downward arrow next to piano and changing to drums (but there is no box to select apply changes), I then back out and it still displays and uses a piano score.
Also is there some sort of setting I can apply so that Logic acts with some Logic... i.e. if I'm using a drum audio instrument then the score editor automatically changes to a drum score, similarily with bass and bass clef?

If I understand you write, you are looking for remapping of the incoming MIDI messages.
So your MIDI Drum Kit is connected to your Mac and sends MIDI messages
A few question:
What MIDI Note message is your drum kit sending when you hit the kick drum, or lets ask, what note "should" it send? Record a MIDI Region while playing your kick drum. Open the Piano Roll Editor and look up what MIDI note that is.
Can you change the assignment on your Drum Kit, i.e. set what MIDI note is send by each drum kit peice?
What MIDI Instrument are you using for the drums in GarageBand?
Do you know what MIDI note is assigned to the Snare sound (D1 ?)
A the end it is about matching the sending note (send from the kick drum) to the expected receiving note (assigned to the snare sound). Changin Cable wouldn't do anything. Either you have to change the receiving mapping (hard to do in GB), or change the sending not from the Kick Drum (should be possible).
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

BOM DTW: No field to upload the receiving warehouse in BOM

Hi,
Can we consider in future release the receiving warehouse (header data) during uploading of BOM thru DTW? This is very tedious on the partners/ customer to change the receiving warehouses after the BOM has been uploaded.
Thanks.

Hi
Note 1328706 unfortunately didn't solve my problem :(.
I want to import (add) warehouses (codes: Cl_K and Sev_Adm1) to Item with RecordKey 3
Here is an example
File oItems
RecordKey
1
2
3
File Itemwarehouseinfo
RecordKey     LineNum    WarehouseCode
3                          5               Cl_K
3                          9               Sev_Adm1
Results of Query select * from OWHS
Код склада (Warehouse code)
1   01
5 Cl_K
9 Sev_Adm1
I've tried to put 4 and 8 in Linenum due to Note 1328706 - no effect.
With regards
Maxim

How to change the speed when switching views?

I've found that for most models I use, that the default speed between view transitions is too fast. I'm trying to find a way to slow it down a little, has anyone had any luck with this?
I've looked around and think I need to write a new Camera Handler. But I've found that by using the JS included in the smooth camera rotation tutorial, this behaviour only works when interacting with the model directly, not when navigating a model's views from buttons when a button simply has this code set:
c3d = this.getAnnots3D(0)[0].context3D;
c3d.runtime.setView (0, true);
I guess what I'm trying to do is change the default speed of the camera during any interaction, whether it's from a button, from the view list or from interacting with the model directly.
Can anyone offer any help?

actually, i did just come across this post on acrobat users,
http://acrobatusers.com/forum/3d/controlling-speed-view-transitions
but is there not a way, then, to change the camera handler and then call that camera to transition to the view? similar to this post below, but without having recreate the view in JS, which I fear will be difficult for me to figure out!
http://acrobatusers.com/tutorials/can-i-add-views-using-camerarotate-javascript

Changing the Receive Handler

Similar Messages

Maybe you are looking for