Check balances of BS/PnL Report

Dear Expert,
I need the information how to check balances for Balance Sheet Report, Profit And Loss Report. I ever found forum thread that we can use the business rules of Validation. Unfortunately, It is not working perfectly. Please experts, could we share the information or the step to check balances ?
I really appreciate your information and suggestion.
Best Regards,

Hi :
Just give you some steps to check this error:
1. Valid rule actually is logic to calculate the rule and put the result number to your target Valid Account.
2. Now firstly use script or manully calculate your valid rule and check if the difference value will come.
If there really exists some difference, then run your valid rule
3. After rule, check if there is any value in your targe valid account, if there is not. There is some wrong with your setting
in your valid rule
4. perhaps you can give us more detail information about your valid rule setting.
Have a nice day
Regards,
Louis Lu

Similar Messages

Difference in GL Balances between two Standard Report fbl3n and fagll03

Hi ,
Mismatch of balances between two standard report ie.fbl3n and fagll03 . We are giving the complete example of what we are facing right now ... please go through the examples .
ENTRY NO. 1
We have posted one MIRO , Accounting Posting is as below : -
PK         Description    Amount
86         GR/IR             1000.00
31         Vendor           -800.00
50          TDS               -200.00
ENTRY NO. 2
We have Reversed the MIRO through MR8M , Accounting Posting was as below : -
PK         Description     Amount
21         Vendor             800.00
40          TDS                 200.00
96          GR/IR            -1000.00
But in Standard report FAGLL03 , .The line items of above twoi entries under GL " TDS " are showing in this way : -
Doc No.      PK      Ammount
Entry 1       50          -200.00
Entry 2       40          -200.00 -
> ?????
*OPEN ITEMS          - 400.00----
> ?????
Although in other Standard report FBL3N , the same are showing correctly as shown below
Doc No.      PK      Ammount
Entry 1       50          -200.00
Entry 2       40          +200.00
*OPEN ITEMS                0.00
PLEASE HELP
Regards
Soumitra Bhattacharya

Hi
FAGLL03 - Display/Change Items (New) - this report is related to ledger reporting purpose. this reports is available after ECC 5.0.
FBL3N - is line item display - this is only GL reports (not in ledger reporting)
if you find any difference is values please check the report variant you are using and ledger you are activated.
hope this will help you.
Regards
Ram

Diff. GL balance (FBL3N) with asset report (s_alr_87011963).

Dear Experts,
There is a certain asset class (Computer) which is not tally to the GL balance. What is the possible reason to check?
I am verifying the GL balance (FBL3N) with asset report (s_alr_87011963). please refer below table.
                           furniture
Particulars
2014
As per F.01 (BS)
           1,098,675.23
As per Report S_ALR_87011963
           1,097,045.98
Furniture
           1,098,675.23
Difference
                 (1,629.25)
Please help me to resolve this difference issue.
Thanks in Advance.

Thanks for your valuable reply,
i have found two line items in GL balance that are not showing in asset report (which is difference amt Rs. 1629).
The document Type is "AA" of below entries.
1. Vat retention @4% for Rs. 1000/-
          asset ac - Dr             1000
                Input vat capital Cr -
2. Vat retention @4% for Rs. 629/-
          asset ac - Dr             629
                Input vat capital Cr -
Report is showing all documents(entries) of Doc type "AA"

Discrepancy between Balance sheet and Aging report

HI Experts,
I have a client who run the AR Aging and Balance sheet monthly for as their month end procedures.
They have found the following:
When the Balance Sheet and Aging report is run on the same day this shows the same on the Accounts Receivable and the Aging report.
When the Aging is run a few days after the month end, and the Aging Date is selected as 05/01/2010, the Posting Date untill is also 05/01/2010, the Balance Sheet To date is 05/01/2010 I get discrepancies between the 2 amounts.
I looked for documents with later Posting/Document dates but could not find any in the aging report.
Any help would be welcome.
Marli

Hi Marli,
You may check these threads:
Re: Mismatch in Accounts Receivable Balance and A/R Aging Balance due
Re: customer aging query - show balance as of a specific date
Thanks,
Gordon

Checking balances with asset register and Trial balance

Hi ,
Need to develop a report for checking balance with asset register and Trial balance. Now asset balances and TB is not matching. We need report at Plant level. pls suggest
Regards

Hi,
In the most reports you can select current book value (you first have to select ALL SELSECTIONS)
These values are the same as on FI on your G/L accounts

My iPhone cannot check the balance and showing "CHECKING BALANCE MOBILE" but not process, what happened and what an i do?

My iPhone cannot check the balance and showing "CHECKING BALANCE MOBILE" but not process, what happened and what an i do?

If the computer iTunes is signed into the same account then contact iTunes:
How to report/refund an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase

HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating no with out name pls what is the solution

HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating number with out name pls what is the solution

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

How to display first row value returened from a query as checked as default in a report

How to display first row value returned from a query as checked as default in a report
Example
Parameter 1
Paramerter2
ABD
x(checked)
Test
DEF
JMG
Mudassar

Hi Mudassar,
The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
order to solve the issue.
If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
the specific value in Default Values dialog box.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Check box in XML Publisher report not displaying

Hi,
In my XML Publisher report , my template contains a checkbox, using forms tools i create that check box and run the report
but output of check box is not comming becoz,The XML Publisher default PDF output font does not support checkbox.
can any one give idea to solve this who face same problems;
Regards,
venkat

Hi Venkat
What version of XMLP are you using ?
Check the user guide, there is an entry in there describing how to specifiy the check box glyph to be used for checks and unchecked.
Its will either be set using the UI or thru a config file depending on your version.
Tim

"Always Use Selected Format" check box in line items report

Hi Experts,
I have an issue in ECC 6.0.
From the transaction code FBL1N (Vendor Line Items) I am trying to export the report to spreadsheet by selecting the option List> Export>Spreadsheet then I have selected "Always Use Selected Format" check box. But if I execute the same report again I am not getting this option "Always Use Selected Format". Please let me how can we retrieve that option. Is there any possibility to get that option again either functionally or technically. I would like to know all the possible ways to get this option again.
Please do the needful.

Hello,
In one my thread Mr. Frank has replied as follows. I believe he has solved this.
Hope this may be really helpful.
The problem with the spreadsheet download is at one point, users have selected their default file type.
That said, SAPGUI is working as it should. (gui710)
Question though is how do we reset the values so they get the ?Select Spreadsheet Format? popup again.
The following steps should be performed :
- Call transaction SE38, enter program SALV_BS_ADMIN_MAINTAIN, and press F8.
- Follow the parameters below :
- Select ?DELETE? on the Actions Group
- Select ?DETAILED SELECTION? on the General Data :
- On Client - your number
- User : <user name>
-Hit EXECUTE.
-Press ENTER on the POPUP
- If there is an entry in the report that will need to be deleted. Also, make sure that the entry you will delete (for the user) has a value of GUI_ALV_XML_VER on field ?Parameter? .
- Select the line and hit the DELETE icon .
- Press ?Y? to continue delete. Press ENTER on the popup.
- Then EXIT all the way out of the program.
NOTE : When you run program SALV_BS_ADMIN_MAINTAIN, make sure they are out of any program that they are using for download.
Re: "Always Use Selected Format" check box in line items report
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 15, 2009 2:31 PM

Balance Sheet , P&L Report Drill Down Reports

Hello Experts,
One of my client requires Balance Sheet, P&L Reports with drill down capability.
Ex: In standard B1, When you run a balance sheet you will see summary of accounts. Client needs to look into the details from summary report by drill down capability. Have anyone worked with same reports before? Please help.

Hi Praneeth,
On the balance sheet, on the top right corner there is a field called - Level - on which you can select 1 to 5 levels. The level 5 gives the complete picture of each account. Same for other financial report like trial balance. Hope that solves your problem.
Thanks,
Kanu

Having problem to check balance.

I am having a problem to check my balance or any other service involving *x# with my iphone 4s.
I am currently using ios 7.0.4.
I have tried everything even reset the settings but nothing worked.

FYI, not everyone knows about the check-balance codes to tap in to the phone.
In Germany, *100# checks the balance on the Congstar network. In America, the codes vary between the big 4 networks. (If they're even used at all)
What is the code you're using, and have you talked to your carrier about it?

Balance Sheet/Income Statement Report using SSRS

I am trying to create a balance sheet, income statement report using ssrs. Due to lack of experience, I am seeking some help from someone who has already built one. For the report I am trying to built, the data isn’t readily available
in a master/detail format. I need to connect to an Oracle DB, run one or more stored procedures (in Oracle) to put data in a temporary/run-time table (reporting table) and read that data to create the financial statement.
Any help or guidance would really be appreciated.

Hi Khaga,
Adding to Vishal's reply, before we can connect an Oracle data source, the system administrator must have installed the version of the .NET Data Provider for Oracle that supports retrieving data from the Oracle database. This data provider must be installed
on the same computer as Report Builder and also on the report server. To retrieve data from an Oracle database, we can use Oracle or OLE DB data source type. For more details about the connection string, please see the following document:
http://msdn.microsoft.com/en-IN/library/dd220591.aspx
Besides, we can refer to the following SSRS tutorial about create a basic report in Reporting Service:
http://msdn.microsoft.com/en-IN/library/ms167305.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to check the performance of a report

plz tell me all the ways to check the performance of a report
if u send me the step wise then it will be really helpful to me
awaiting for u r reply

I. Non Database Performance
Dead Code (Program -> Check -> Extended Prog. Check) - unused subroutines appear as warnings under PERFORM/FORM interfaces. - unused variables appear as warnings under Field attributes. Transaction code is SLIN. This will also catch literals (section III below).
When possible use MOVE instead of MOVE-CORRESPONDING (move bseg to *bseg or move t_prps[] to t_prps2[] if you want to copy entire table or t_prps to t_prps2 if you only want to copy header line.)
Code executed more than once should be placed in a form routine.
SORT and READ TABLE t_tab WITH KEY ... BINARY SEARCH when possible especially against non-buffered table (Data Dictionary -> Technical Info)
SORT tables BY fields
Avoid unnecessary moves to table header areas.
Subroutine parameters should be typed for efficiency and to help prevent coding and runtime errors.
II. Database Performanc
Avoid ORDER BY unless there is index on the columns - sort internal table instead
SELECT SINGLE when possible
SELECT fields FROM database table INTO TABLE t_tab (an internal table) - Lengthy discussion.
Views (inner join) are a fast way to access information from multiple tables. Be aware that the result set only includes rows that appear in both tables.
Use subqueries when possible.
"FOR ALL ENTRIES IN..." (outer join) are very fast but keep in the mind the special features and 3 pitfalls of using it.
(a) Duplicates are removed from the answer set as if you had specified "SELECT DISTINCT"... So unless you intend for duplicates to be deleted include the unique key of the detail line items in your select statement. In the data dictionary (SE11) the fields belonging to the unique key are marked with an "X" in the key column.
(b) If the "one" table (the table that appears in the clause FOR ALL ENTRIES IN) is empty, all rows in the "many" table (the table that appears in the SELECT INTO clause ) are selected. Therefore make sure you check that the "one" table has rows before issuing a select with the "FOR ALL ENTRIES IN..." clause.
(c) If the 'one' table (the table that appears in the clause FOR ALL ENTRIES IN) is very large there is performance degradation Steven Buttiglieri created sample code to illustrate this.
Where clause should be in order of index See example.
This is important when there are multiple indexes for a table and you want to make sure a specific index is used. This will change when we convert from a "rules based" Oracle optimizer to a "cost based" Oracle optimizer. You should be aware of a bug in Oracle, lovingly referred to as the "3rd Column Blues". Click here for more information on indexes.
Where clause should contain key fields in an appropriate db index or buffered tables. As long as we are using the Oracle Cost Based Optimizer, be aware fo the "Third Column Blues", an Oracle bug.
Avoid nested SELECTs (SELECT...ENDSELECT within another SELECT...ENDSELECT). Load data in internal tables instead. See item 3 above.
Use SQL statistical functions when possible (max, sum, ...)
Delete all rows from a table. A where clause is mandatory. Specifying the client is the most efficient way.
Put Check statements into where clause - caveat: Make sure that the index is still being used after you add the additional selection criteria. If the select statement goes from using an index to doing a db scan (reading each row in the database without going through an index) get it out of the where clause and go back to using "Check"!
III. Literals
Codes ('MD') should use contants (c_medical)
Longer text should use text elements. Sample code is a good example because it uses the text element in conjunction with the hard coded text. This documents the text element and provides for the possibility of multi-language support.
IV. Miscellaneous
Use CASE statement instead of IF...ELSEIF when possible (It is only possible in equality tests)
Nested If - encounter most likely to fail first (specific to general)
And - encounter most likely to fail first (specific to general)
OR's - encounter most likely to succeed first (general to specific)
Variables should use Like when possible
Subroutine usage - don't place decision to execute in the subroutine
If not ( t_prps[] is initial ) (instead of describe table t_prps lines sy-tfill, if sy-tfill > 0...)
New document types confirmed with the configuration team via MIT-ABAP mail list prior to coding a report to access the data.
Dates need to be properly formatted using the user's default settings. For the explanation of the BDC example check out the developer's standards.
regards,
suryaprakash.

Do I need to check "READONLY" parameter in BBP_SC_AUTO_RETRANSFER report?

Hi Gurús,
I applied SAP Note 1499352 - SRM Transfer: Redesign, bug fixes (and all its correction notes).
The new BBP_SC_AUTO_RETRANSFER report is needed to scheduled with a job.
The report has three parameters:
ADD_TIME (Hours since last "changed at") - default value 48
ADDTIME2 (Timeout hours) - default value 24
READONLY (Read only, no Updates) - checked by default
But I don't know if READONLY must be checked in job scheduled.
My system is:
Component software: SRM_SERVER
Release: 700
Level: 8
Support package: SAPKIBKV08
I'm using extended classic scenario.
Do I need to check "READONLY" parameter in BBP_SC_AUTO_RETRANSFER report?
Thanks in advance,
Alonso Valenzuela

The parameter was unchecked to save changes in database.

Check balances of BS/PnL Report

Similar Messages

Maybe you are looking for