Checking SAP notes on Solution Manager

Hi...
I need to get a report with all the SAP notes applied in my ERP environment.
If I use tx code snote, on ERP, I can find this, but I need something on Solution Manager, like a report...
What can I do?!
Thank's in advance.

Hi,
If you have already configured Diagnostics,(Solution manager Diagnostics - SMD and its a must for this activity), call Txn-> Solman_workcenter -> Root cause Analysis-> End to End Analysis->Select your system <SID>-> Change Analysis-> Select the Time Frame->goto notes ->Jump in-> to change Reporting ->Export the Result(if needed).
Or
Under RCA- Call system Analysis -> Change Reporting -> Select the instance and Get the suitable Extractor to get this :).
Hope this helps.
PS: If you have not configured Diagostics yet, Do configure it in first place, other wise, you don't have an option in solman and had to ge the individual reports from remote/satellite systems :(.
Kindly revert for any issues.
Thanks,
Jagan

Similar Messages

  • Search & Install SAP Notes using Solution Manager

    Does anyone have specific documentation on how to search and install SAP notes using Solution Manager. I have read numerous times about this capability but have not found any success finding specific info on how this is done.
    Can someone please share their experience? Can you also provide some documentation?
    Thank you

    Dear Ramesh,
    Like what Rajeev has mentioned, you can use transaction tab in your message/ticket for searching for note or even deploying to satellite system.
    for this in solman you need to maintain these 2 enties, so that it takes you to service market place.
    trxn: dno_cust04
    Field Name                             Seq                   Field Val
    URL_DISPLAY_NOTE             1              http://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm={&1}&nlang=EN
    URL_SEARCH_NOTE              1              http://service.sap.com/notes
    Regards,
    Shyam.

  • Pagefile for SAP Erp2005 and Solution Manager 4.0

    Hi all,
    I've installed SAP ERP2005 and Solution Manager 4.0 on the same server with Windows 2003 Standard 32bit.
    The RAM on this server is 3325MB.
    How many paging file I must configure???
    At the moment I configured the pagefile size as defined in the installation guide:
    1 RAM + 8GB that is 12285MB.
    Is it correct????
    For both instance I set the PHYS_MEM parameter to 2328 (70% of the RAM)...is it correct??
    P.S. How to calculate the [BE] parameters??
    [BE] = maximum possible number of user calculated from the size of physical main memory
    Thanks in advanced
    Moreno

    I agree with Yaroslav,
    you should NOT set those values:
    em/initial_size_MB  |----    [PM]  |----    [PM]   |Mbyte     |
    |---    em/max_size_MB  |---    20000  |---   100000   |Mbyte     |
    |  em/address_space_MB  |-----    512  |-----   4096   |Mbyte     |
    |----  ztta/roll_first  |-------    1  |-------    1   |Byte      |
    |---    ztta/roll_area  |---  2000000  |---  3000000   |Byte      |
    |  ztta/roll_extension  |  2000000000  |  2000000000   |Byte      |
    |    abap/heap_area_dia  |  2000000000  |           2000000000   |Byte     |
    | abap/heap_area_nondia  |  2000000000  |           0  |Byte      |
    |  abap/heap_area_total  |  2000000000  |[PM]*1048576   |Byte      |
    |-    rdisp/ROLL_MAXFS  |  [BE] * 100   |  [BE] * 100   |8KB Block |
    |---    rdisp/ROLL_SHM  |  [BE] * 100   |  [BE] * 100   |8KB Block |
    |---    rdisp/PG_MAXFS  |---    32768  |---    32768   |8KB Block |
    |-----    rdisp/PG_SHM  | 
    so... that [BE] value is not to be used.

  • How to check the messages in solution manager?

    hai experts !
    how to check the messages in solution manager?
    in which transaction do we see them?

    Hi Kiran,
    From what I gather from your brief question, you are perhaps looking for CRM_DNO_MONITOR that would display all queries created from Satellite/SolMan system itself, as support messages.
    If you are looking for Notifications underlying those messages, please look for DNOTIFWL.
    For more specific answers, please provide more description of what you are looking for.
    Trust this helps.
    Regards,
    Srini

  • How to monitor all SAP Server through solution Manager?

    Dear Friends,
    How to monitor all SAP Server through solution Manager?
    Is it possible if yes then how? Please forward configuration and transaction also.
    Please help me as early as possible..
    Thanks,
    Regards,
    Sachin

    Hi sachin,
    You can monitor your sattilite systems through solution manager.
    If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
    Before including the systems in solution manager we need to create a solution using tcode <b>DSWP</b>.
    After that you can include the systems using tcode <b>SMSY</b>.
    For configuring the systems we have lot of phases its very difficult to explain here.
    Try to login to<b> service.sap.com</b> and <b>help.sap.com</b> find the helpfull guides.
    i hope it will help you.
    any issues post it.
    kiran kumar.v

  • We have SAP CUA on Solution manager 4.0

    Hi,
    We have SAP CUA on solution manager 4.0,SAP BASIS component 700. Do you know what is the latest Support pack and version for solution manager and what is netweaver identity management.Which one is better for CUA environment
    Thanks and Regards
    Yakoob.

    Hi,
    Netweaver Identity Management (IdM) should replace SAP Central user administration (CUA) somewhere in the future. As far as I know SAP still supports CUA but doesn't develop further enhancements for it, because they see IDM as the new product. So when you still want to work with CUA then you can create a new one on your new SolMan and you have to move the administration to this one.
    Regards, Basti

  • Not aware of system readiness check - SAP Note 817920.

    Hi,
    I am not aware of system readiness check SAP Note 817920.
    Can you please let me know the procedure do it?
    And also I am not able to log on http://server:port/rwb in XI server.
    please suggest me.

    hi
    1. if you want to look this sap note SAP Note 817920 for this you must have market place user id password
    To check SAP Notes go to http://www.service.sap.com/notes
    2. And also I am not able to log on http://server:port/rwb in XI server.
    r u able to login into xi server if yes then u r entering wrong id adn password..if no then check for user id and password is it valid ?
    Thanks
    Kunaal

  • SAP EHP1 for Solution Manager 7.0 - Post Install Procedure

    Hello Folks:
    I completed Sol Manager 7.0 EHP1 installation on Win 2008 R2 with MS SQL in a sandbox environment. This is the first time I ever installed SAP on my own and i am in the process of performing post installation steps from Installation Guide.
    In the install guide, there is no mention of creating a new client ex: 100. Could you please, provide a list of tasks that generally needed to perform after the installation is completed and before doing any configuration in Solution manager.
    I have some very basic idea on the Basis but while going thru Installation Guide I am not sure if there any steps that generally need to perform to complete the installation.  My goal is to complete the Sol Mgr installation first and then start preparing for ECC 6.0 Installation.
    Thanks a lot in Advance.

    Hi,
    First - the basic post installation steps are:
    1. sick t-code need to execute
    2. se06 --> Perform Post-Installation Actions
    3. RZ10 --> Utilities --> Import profiles --> Of active servers
    4. execute sgen T-code --> This will take some time
    5. setup STMS
    6. create client (If custom required)
    7. Take backup of the system
    For the solution manager client you could use the default created '001' client.
    Next you need to run the solman_setup template which 'sets up' the SolMan for usage.
    Follow config guide at: https://service.sap.com/~sapidb/011000358700000308502009E.PDF
    For installing the ECC system, only a install key(from SMSY) is to be generated from SolMan. But if you want to use the SolMan effectively, suggest you to run the entire solman_setup.
    Regards,
    Srikishan

  • CHARM Tab does not appears -- solution manager

    Hi Experts,
    I want to configured CHARM but in tx SOLAR_PROJECT_ADMIN in System Landscape -- Change Request Tab does not appear
    Also tx  solar01 is locked! the project doc for example . But in scope a have not checked the link.
    Any clue?

    Hello,
    In SOLAR_PROJECT_ADMIN  are you creating a project or runing an analysis?
    The Analysis screen is not tabbed, it is a tree.
    Change request management apears under Solution.
    When you create a project, there is not a Change Management Tab.
    So are you refering to creating the project or performing the Analysis?
    Regards,
    Paul

  • Notes on Solution Manager

    Hi
    I am new to Solution Manager. can any one you could kindly help me out with some notes / PDF's on Solution manager
    Thanks in advance.
    Srini

    Hi Srini,
    You have the whole world of docs at the below Links.
    https://websmp103.sap-ag.de/solutionmanager --> You would find the insdtallation guides, release strategies and technical papers in Media Library.
    https://websmp202.sap-ag.de/rkt-solman --> You would find the road maps for elarning solman.
    Hope it helps.
    Br,
    Sri
    <i>Award points for helpful answers</i>

  • Note 91488 - Solution Manager...

    Hi everyone,
    Any idea where I can find more information on the SAP Solution Manager Add-Ons mentionned on Note 91488 (Almost at the end of the document)
    ST-BC: Basis Settings
    ST-PL: Business Process Repository
    ST-RM: Roadmaps
    I need to find the installation files associated with the above Add-Ons and had  no luck so far.
    Thank you
    Coco

    HI,
    Now it took me forever to find it..
    follow this note >> 539977
    and to get there: service.sap.com/installations
    My Company's Application Components"
    chose >> SAP SOLUTION MANAGER"
    select >>> SAP SOLUTION MANAGER 4.0"
    you will see >>> Plug-In Satellite System"
    Thanks,

  • SAP IDM on Solution Manager with Change Request Management

    Hi Experts,
    I'm facing a question. Does SAP Identity Management manage association between user in Solution Manager and links in PPOMA_CRM tree for Ticket validation on Change Request Management project ?
    It seems that it could be done using Compliant User Provisioning from GRC Access Control application.
    Thanks for your help,
    Ben

    Hello Ben,
    as far as I know currently there is no "business level" integration between IdM 7.1 and SAP Solution Manager. You only can create SU01 user data as for any other SAP ABAP system.
    I have heard that it is planned for the future to integrate the Solution Manager also in the business suite integration options the IdM product already provides for applications such as CRM, SRM and others.
    Nevertheless you could create your own implementation for your requirements.
    Regards,
    René Feister
    SAP Consulting Germany

  • Does somebody have experience to manage SAP project with solution manager?

    Hi friends,
    I will implement new project for my client. As I know, solution manager is already part of SAP Netweaver. To install SAP NetWeaver, solution manager must be installed. Meanwhile, solution manager provides a project management tool, for example, the business process definition, blueprint...
    But I never use it to manage project. Could somebody share experience in this area?
    Regards,
    Watson

    Hi Ragu,
    Thanks for your posting. I will implement a SAP APO project. What I need is the methods to use solution manager, for example, configuration manual, step by step guide. I'm also interested in the advantages of SAP solution manager.
    Regards,
    Watson

  • SAP Instances on Solution Manager

    Hi Gurus
    I would like to find out on where on the Solution Manager do you maintain SAP Instances and how this is done?
    Regards
    Khuselwa Mabandla

    Hi
    What I am trying to do is to setup business process management, on the monitoring type "Dialog Monitoring" which monitors my transactions, the system requires me to select SAP Instances, which I think are my servers that I need to setup to tell the system on exactly what I want to monitor..
    Regards
    Khuselwa

  • Check SAP note in Developement system

    Hi
    There is one note 1318938 regarding service tax program. I want to know of that note is implemented in our SAP system. Let me know how to check if it implemented or not.
    In TCode SNOTE, i did not find path where i can check if above note is applied or not.

    Hi,
    The easiest way is to go to SNOTE, Menu - Go to - Download SAP note. Download the note, if the status will be 'to be implemented' then it's still relevant, if it will be 'grey' - then it's already in the system.
    Regards,
    Eli

Maybe you are looking for

  • Win10: 7.5.0.102 crashes after changing language via Alt+Shift+(2\3)

    Windows 10 build 10130 @ English MUI Skype 7.5.0.102 Language changing is set up to use Alt+Shift+(1\2\3) to switch to English\Russian\Ukrainian accordingly. After pressing Alt+Shift+2 or Alt+Shift+3 in any chat Skype stops responding. Bug existed si

  • SAP GRC 5.3 CUP: Initial Password not displayed

    Hi, when a user account is created in the backend system CUP sents automatically the user ID and a link such as http://<Server>:50100/AE/showPassword.do?userId=NEWUSER30&ReqNo=1061&System=ERD to the user's email adresse. When opening the link no pass

  • Using Speed / Duration At Points In a Clip

    Hi, Great forum! I am using Premier Pro (v6.x) and I've a clip that is ten seconds in length. Between the four and eight second mark I need to use Speed/Duration to slow this down to ~10% of the original speed. How is this accomplished? Many thanks a

  • Determining Exception in finally clause

    Is it possible to determine if an Exception has been thrown in a finally clause? This is in reaction to the anti-pattern log and throw. Bad: try     someCall(); catch (someException e)     log(e.getMessage());     throw someException("oops", e); }Wha

  • Undo/Redo help please...

    I want to include undo/redo capabilities in my app. All the examples and code that I've seen deals with text. Can undo/redo handle undoing the move of an object(from one side of screen to the other), undoing the adding of a label or panel to a frame,