Cheque Return - Received in Cash Desk

Dear Friends,
I had taken an incoming cheque Payment using cash desk in FPCJ. After 3 days  , I made a  return entry for the same cheque through a return lot FP09 as bounced, But it shows the following error,
Returns are not allowed on cash journal payments
Message no. >2687
Diagnosis
You want to post a return on a payment document which was generated due to a posting in the cash journal (using a payment lot). This is not allowed, because the related cash desk is already closed. The balance in the cash desk can no longer be adjusted, since this would result in an incorrect balance.
So how do you pass the Cheque returns entry for cheque payment in Cash journal ? Has anyone of you experienced the error? Any suggestions to resolve the same.
Thanks and Regards,
Rajesh

Hi ,
The problem you are facing is genuine .
As of now the current support packages doesnt seem to support this functionality .
Kindly go through the following SAP Notes 1311357  and 1459852 , which talks about the problem in detail .
The information provided in the notes makes it clear that , as of now you will have to reset the document using the T code FP07.
Hope this suffices .
Regards ,
Dewang.

Similar Messages

  • Returns for cash desk(check) payments

    Hi All,
    I posted a check payment( Feb10th 2011) through cash desk FPCJ against a receivable $47   , cash desk is closed and then trying to post returns lot for the check payment on Feb 15th 2011, the returns item is automatically going to clarification account and even in clarification not able to clarify the item through FPCRL error message : Trying to return the payment posted through cash desk.
    What I was expecting is when I try to post the returns lot for the payment document using options Type of posting '2' and selecting the option enhanced returns processing, a new receivable will be created for the amount 47 but thats not happening.
    \any help is greatly appreciated.
    I read the notes : 644870, 1459852, 1311357.
    Thanks,
    VR

    Hi Vikarm,
    Can you tell me the solution what you did to solve this issue and what u modified for this.
    Thanks in advance,
    Cherry.

  • Returns for Cash Desk Payments

    If you have applied support packs or upgraded to ECC6 - then you may have encountered the effects of [Note 1311357|https://service.sap.com/sap/support/notes/1311357] - which prevented the ability to process returns against payments accepted in cash desk after the desk is closed.  Modification note 1604501 new note 1631779 (see below) has been created to remove that restriction.  This is a modification, and will not be provided in standard.  You must contact SAP in order to utilize it and to be made aware of the repercussions - cash desk balancing issues, etc.
    Edited by: William Eastman on Jan 4, 2012 10:47 PM

    Newly released note [1631779|https://service.sap.com/sap/support/notes/1631779] enables returns processing for cash desk payments.

  • Calculation of change amount for cash payments via cash desk, release 602

    Does anyone know how to get the change amount to calculate for cash payments via cash desk?
    I am only able to enter the amount in each payment type tab and then the payment amount in the summary. The total of the individual payments must add up to the summary payment amount or I get an error.
    How then if a customer wants to pay $20 towards their account and they give me $50 in cash, do I get the change of $30 to display?
    Any assistance would be appreciated as the old version of cash desk had a "given" and "back" field that no longer exist.

    Was not an error, just using the fields the wrong way around. So enter the amount received in the seperate tabs and the amount that is being paid to the account in the summary payment amount field. After you hit post, the change field is filled.
    Is another issue though as if pay by multiple payment types, system allows you to give change greater than the amount of cash received. This should not occur as people could use this process to cash for cheques or credit card payments. Especially an issue as cheque could be returned.

  • Custom Selection Screen in Cash Desk

    Hi Expert,
    We have a requirement to develop Custom Screen for Select Items in Cash Desk. In standard SAP Select Item Screen, it shows the open FICA doc. no., amount, and due date, we can select any one of open FICA doc. no. to receive payment against it. In our custom screen for select items, we need to show amount and due date against Invoice No. (Print Doc. No.) and also to derive Bill Month from bill Start and End Period.
    We are not finding any exit to develope this Custom Screen. Could you please suggest whether custom screen for select item is possible in Cash Desk?
    Thanks & Regards,
    Rupam Paul

    Hi Rupam,
    You can use the FI-CA Event 6020 to accomplish this.
    This FICA Event is triggered during Cash Desk selection.
    The following is a brief description of the capability of this event:
    Event 6020 allows you to change the possible entries function to suit your requirements. The information provided by the function is taken from the X_TFK004 structure. The parameter Y_SELW is used to return the selected value.
    You would have to add ABAP code in this Event to make your fields visible as parameters, and also add the retrieval logic.
    I hope this helps.
    Ivor Martin

  • GL assignment for Cash Desk and House Banks

    Hi,
    I am very new to FICA.
    Can any one help me the following questions.
    1. In FICA amount will get posting Cash Desk Clearing Account.
    My client is asking this amount should post in main cash journal which we are following in FICO. Since he is trying to monitor the same in one place.
    Will it possible, If so, can any one give the solution?
    2. My client is having two House bank and customer remits the amount through Cheque only. There is no payment cards, Direct depit.
    In this cash i need calrification about the GL account assignment in FICA part. Like clearing account, etc..Since i am not clear about this area. Can any one give the full details with IMG structure.
    Please treat this as an urgent. If i am getting anything on this it would be very greatful for me...
    Thanks
    Sriram.

    Hello,
    Are you looking for same balances in FPCJ & FBCJ?
    If so pls refer to below post<for Q1>
    Re: Cash Book.
    Question Number two:
    We are giving so many GL accounts for bank accounts in fica. I would like to know the flow which we are using in FICA
    The GL Accounts for bank accounts in FICA are mentioned in IMG\FICA\Business Transactions\Payments\Processing of Incoming and Outgoing payments\Define Bank clearing Accounts for Payment lots.
    When you are assigning a bank clearing account, it means that Bank clearing account wud be debited during receipts and credited <Returns config is needed> during Returns.
    Hope this is useful. If not let me know.
    Rgds
    Rajendra
    Edited by: rajendra mukhyaprana on Jun 23, 2008 6:58 AM

  • Reverse the payment from the Closed Cash desk?

    Hi Experts,
    What would be the correct and the best solution to reverse the
    payment done from Cash Desk which has been already closed?
    so ps confirm the method to reverse, ASAP.
    Basha

    Hi Abash,
    If the cash desk isn't closed then you can reverse the payment - IN FPCJ transaction code goto Environment in menu bar and it will give you the option of reversing the payment.
    If the cash desk is closed then you can't reverse the payment through through FPCJ , if you are trying to post a return document to reflect the payment  using FP09  then you need to select the options enhanced returns processing and typing posting to new receivable if payment cannot bew reversed.
    Thanks,
    VR

  • GL Accounts for cash desk

    Hi Gurus,
    In our business process, check payments are accepted through mail and walk-in. All the mailed-in checks will be posted using check lot FP25. All the walk-in payments are posted using FPCJ (cash desk).We are posting checks using check deposit account (posting area 1031 and 0080)
    In the
    1) Check Lot:
    For each individual check
    Dr Check clearing Act
    Cr Customer Act
    For the lot
    Dr Check deposit Act
    Cr Check clearing Act
    Overall check lot accounting entry would be
    Dr Check Deposit Act
    Cr Customer Act
    2)  Cash Desk:
    For the check payments posted through cash desk also we have similar entries
    Dr Check Clearing Act
    Cr Customer Act
    When lot is closed,
    Dr Check deposit Act
    Cr Check clearing Act
    Accounting entries are same as check lot till now. But when we do withdrawal from the cash desk, we are forced to create one more accounting entry
    Cr Check Depost Act
    Dr Withdrawal Act
    Withdrawal process is reducing our check deposit acct balance, though both the check lot and cash desk are used to handle the check payments. Configuration for posting area 0160 does not allow me to assign the same deposit account for withdrawal.
    I believe this is a common scenario, so hoping I'll find a resolution.
    Thanks in advance.
    Regards,
    Santosh

    Hello,
    Are you looking for same balances in FPCJ & FBCJ?
    If so pls refer to below post<for Q1>
    Re: Cash Book.
    Question Number two:
    We are giving so many GL accounts for bank accounts in fica. I would like to know the flow which we are using in FICA
    The GL Accounts for bank accounts in FICA are mentioned in IMG\FICA\Business Transactions\Payments\Processing of Incoming and Outgoing payments\Define Bank clearing Accounts for Payment lots.
    When you are assigning a bank clearing account, it means that Bank clearing account wud be debited during receipts and credited <Returns config is needed> during Returns.
    Hope this is useful. If not let me know.
    Rgds
    Rajendra
    Edited by: rajendra mukhyaprana on Jun 23, 2008 6:58 AM

  • Cash Desk Clearing A/c

    Dear Gurus,
    I am facing a problem with Cash Desk Config. during implementation. When taking payments in Cash Desk using T Code FPCD, a Clearing account is to be mentioned in the screen.
    Please guide me as to how the amount which gets posted to the Clearing account is getting finally posted to the House bank G/L  account.
    Please advise as to whether it happens with a T code or another Configuration settings.
    Any help in this matter will be highly appreciated.
    Thanks and Regards,
    Rajesh Vasudev

    Rajesh,
    When you post a payment, the entry would be
    DR : Bank Clearing Account
    CR: Customer/Contract Account/BP
    Now when you tr the entry to FI-GL, the entry would be
    DR : Bank Clearing Account
    CR: Recon Account
    Now when you upload the EBS statement received from the bank,assuming that all your config in place, the entry would be:
    DR: Main bank account
    CR: Bank clearing account
    Now your Bank clearing account shows BRS where as Main Bank account reflects EBS.
    Clear? If not pls be more clear in your question
    Rgds
    Rajendra

  • FICA: BarCode Reader for Cash Desk

    Hi,
    We are working on SAP ISU 4.64 version. WE have a requirement to map the Cash Desk process which is also having the facility to read the bar codes.
    Would require your help.
    Regards
    Saket
    9999011227

    Hi Saket, you should use event 6060 Cash Desk: Barcode Interpretation, else you should mark the flag Cash Desk: Barcode Interpretation on the following IMG route:
    Contract Accounts Receivable and Payable->Business Transactions->Payments
    Processing Incoming and Outgoing Payments->Cash Desk/Cash Journal->Maintain Specifications for Cash Desk/Cash Journal
    Best regards.

  • FPCJ Cash Desk fields populate through event 6060

    Hi All,
    I have a requirement to populate fields of Cash Desk tcode FPCJ through event 6060 ( reading bar code) but no idea how this event will get trigger .I checked it is not getting trigger through FPCJ.
    For testing , Contract Acc (VKONT) is filled in screen field RFKH1-SELW1 but not getting pouplated on screen.
    Any suggestions will be appreciated.
    Thanks

    Hi
    SAP Customizing Implementation Guide
    Financial Accounting (New)
    Contract Accounts Receivable and Payable
    Business Transactions
    Payments
    Processing Incoming and Outgoing Payments
    Cash Desk/Cash Journal
    Maintain Specifications for Cash Desk/Cash Journal:
    flag field XBRCD (Display Entry Field for Barcode)
    This falg has the effect that the entry field for the barcode is displayed in the cash desk or in the cash journal.
    If the barcode field (RFKH0-BARCD) in FPCJ filled, then the event 6060 is called.
    Best regards.
    Christiane

  • External Cash Desk ES Bundle

    Hello,
    We are planning to implement External Cash Desk ES Bundle at our place...
    Where can I find any cook books or any step by step guide...
    My problem here is what type of communication channels should I use to connect ERP from PI for this bundle..
    THanks
    John

    Hi John,
    My problem here is what type of communication channels should I use to connect ERP from PI for this
    bundle
    You need to use proxy connection for ERP to PI ( use XI adapter,for an inbound scenario )  as the ES bundle when imported in ESR will create proxies automatically in the backend system. The recieve side you can use the same strucuture (copied) or as required . You can use soap receiver  adapter as most of the services are synchrounous  and have confirmation messages.
    or if you  want  to design without PI then you can create end point in soamanager for the Enterprise services(/people/mohan.kumark/blog/2008/10/14/soamanager-how-to-test-service-definition-using-soamanager-transaction)
    few more helpful link ..
    SOA Management [original link is broken]
    http://help.sap.com/saphelp_nw04s/helpdata/en/80/be7042f1e6d242e10000000a1550b0/frameset.htm
    Service Bus-based Integration [original link is broken]
    point 6  in /people/thomas.jung/blog/2007/12/17/consuming-services-with-abap, in fact its a very good blog to understand the concept.
    Regards,
    Srinivas

  • How to create a new cash desk

    Hi Everyone,
    Please guide me how can i create a new cash desk to accept payments.
    Thanks and Regards

    You create a new cash desk in configuration. See the path below
    SAP Customizing Implementation Guide
    -->Financial Accounting (New)
        -->Contract Accounts Receivable and Payable
           -->Business Transactions
              -->Payments
                 -->Processing Incoming and Outgoing Payments
                    -->Cash Desk/Cash Journal
                       -->Define Master Data for Cash Journal

  • Clearing from payment lot(FP05) and cash desk

    Hi ,
    Background of the issue: when we post from payment lot or cash desk account clearing happens( clearing open items).
    Issue: My client has a requirement when the posting is done for a particular account from above two (payment lot or cash desk) clearing should not happen for the open items (documnets)which has any payment method on the item(document)(like P-payed by phone).
    For me it looks like ,this issue can be handled  using customer module in clearing variant.but can some one let me know which module should be called?at what step of the clearing variant?I don't have much knowledge on clearing Variants.(I am not sure this is right approach)
    Also please suggest other solutions? Again this process (avoiding clearing  open items with payment method)should be triggered only when posting is done from payment lot and cash desk.
    Thanks,
    Shiv

    Dear Shiv,
    For me the best way is  use the event FKK_SAMPLE_0262  if you dont need the Payment send to clarification....
    But their is others ways ; 
    1 - Event FKK_SAMPLE_0110 this is for all Payment ( You can Clear the Internal Table by validating that you need  t_fkkcl )
    2  - events by the varinat of conpensations FKK_SAMPLE_TFK115 /FKK_SAMPLE_TFK116
    I hope it help
    Andre Frugulhetti

  • Use of External cash desk using PI

    Hi,
    The client of my project has a new requirement regarding the posting of payment from third party.
    Currently , its running maintaining standard process.
    Bill fetch is done by third party through PI WS.
    Then payment which is stored in a ISU staging table using PI WS and reconsilation at the end of the day.
    After that FICA do the posting.
    But now client is asking for external cash desk through which posting will be done instantaneously.
    I have no idea regarding that . From internet which I understood is PI need to host some webservice which is some standard webservices available in ES bundles.
    the concept of ES bundle is new to me , how to use this in PI and how to integrate this with ISU that FICA can do the prompt posting.
    Please help me.

    Hi Avinash,
    Sorry for the late reply.
    I am not creating the support desk message from crmd_order. But we create the support desk message from the test package, as our support desk messages need to be linked to the test packages. In this case, the actual transaction that gets executed for creating the support desk message is notif_create.
    By creating messages in this way, we are getting both the ABA messages and the CRM messages created. But we are taking only the CRM messages for processing. The numbers are different for ABA messages and CRM messages.
    The no. of the ABA message is similar to the number that is getting filled in the External reference no. field. The no. of the CRM message is different.
    Any more inputs pls?
    best regds,
    Alagammai.

Maybe you are looking for