Clear open reservation for Final issue indicator.

Final issue indicator is not getting checked unless we issue the entire requirement quantity.
How can we get it checked for all components without going into the process order?
Does the clear open reservation checkmark be used for this purpose and if with Final confirmation?
or is there something else?
Thnx!

Hi Abhi,
While confirming the operations, flag 'Clear open reservations' check box & this will set the "delivery completed" indicator for all open reservations.
Hope it answers your query.
Regards,
Vivek

Similar Messages

  • Final issue indicator for Reservation Item

    Hi,
    The issue is as follows:
    The Componets for the Process order are issued through T. code COIK. Some componets are not appearing in COIK list . when the picking is done for the order, the final issue indicator is set in the process order where the componets are not picked and also the final issue indicator is not set where the componets are picked.
    Can anybody tell me what could be the Reason/s for the above.
    Regards,
    Prasad

    Dear,
    FI indicator can be set manually via MB22 though the Reserved qty has not been withdrawn.
    There is indicator in MB22 to tick for the final issue, this indicator is set automatically for a goods movement when the total reserved quantity has been withdrawn or delivered.
    Final option is to clean only the reservation for a given material, just go to the ordern in change mode, and then to the material details, and set the flag "on" for the field "Final Issue".
    Reservations are created when order gets released.
    1. can clear these reservations at the time of the order confirmations by clicking on checkbox for clear open reservations.
    2. You can also clear this reservations by using transaction code MB22 & deleting the reservations.
    3. You can delete all reservations by deleting material documents or by cancelling process order confirmations.
    4. Or by checking final issue in process order transaction COR2.
    Hope this will resolve your querry.
    Regards,
    R.Brahmankar

  • Final Issue Indicator on reservation

    I am looking for the answer to how the Final Issue Indicator should function when it is checked doing a partial goods issue to a reservation.
    I've found differing documentations.
    1- Final Issue indicates that a reservation item is completed. Further goods movements in respect of this reservation item are not anticipated, although they are still possible.
    2- If the Final Issue Indicator is set that it will no longer be suggested as a selectable item for issue.
    My problem is that when the Final Issue Indicator is set while doing a partial goods issue, the item still shows up on MIGO as a selectable item when you are issuing remaining items. I did not think the item would still show up as selectable. (seems to be following #1)
    When the Final Indicator is set before issuing anything on the item, then the item doesn't show up as selectable on MIGO. (Seems to be following #2)
    Thanks for any help.

    Hi
    Final issue indicator behaviour in reservation.
    1) Create reservation and in change mode set the FI indicator.
    In this scenario system will not not allow you to use reservation saying that XXXX does not contain selectable item.
    2) Create reservation and do the partial goods issue then set the FI indicator.
    In this scenario system still allows to do the goods issue for the remaining item.As per standard SAP it is still possible to do the GI for the partial issed one even the FI is set. If you want to restrict then you can either set the deletion indicator or remove the movement allowed indicator.
    Hope it helps at some extent.
    Karthik

  • How to deactivate automatic setting of final issue indicator in reservation

    Our client has a requirement to deactivate the automatic setting of the final issue indicator after the reserved quantity on a reservation has been fulfilled.
    The requirement comes from an overnight shift that does not have access to the SAP system, so the final issue indicator that is automatically set after the reserved quantity is fulfilled cannot be reset manually when the material is needed during the overnight shift.
    I do not believe backflushing is an option because the material is issued to a cost center (orders are managed outside SAP) and thus there is no confirmation.
    Is there a standard method for deactivating the automatic setting of the final issue indicator when the reserved quantity is reacched?
    Thanks.

    Bob_Smith1103 wrote:
    The requirement comes from an overnight shift that does not have access to the SAP system, so the final issue indicator that is automatically set after the reserved quantity is fulfilled cannot be reset manually when the material is needed during the overnight shift.
    Please see my earlier comment that the overnight shift does not have access to SAP and therefore cannot manually reset the final issue indicator until the next day when someone with SAP access is present.
    Obviously the goods issue could wait until the next day, but the client is not satisfied with waiting until the next day to post-process the goods issue.

  • Final issue indicator for component

    Hi
    I have requirement to set final issue indicator to all components when process order has DLV status.
    We have confirmation configuration which will set  final issue indicator when operation is finally confirmed.
    Iam using special control key to identify operation for which components are attached
    If i use COHVPI mass confirmation then it confirms all operations though i select special control key in layout filter. We dont want to confirm all operations
    Is there any STANDARD way to do mass confirmation of selected operation / phases. ?
    Or
    Is there is any  STANDARD way to set final issue indicator for all process order components, when order is delivered?

    Hi Caetano
    My requirement is to do this in background with confirmation of only one operation for which i have special identifier like control key.
    I dont want to confirm other operations.

  • Clear Open Reservations in CO11n

    Hi All....
    I have a doubt on clear open reservations check box in colln.
    Please explain how it works.. if it is ticked and unticked in both cases what happens??
    I tried GI with/without ticking the clear open reserv. in both cases the material is issued from the stock against the reservation no.(Bachflush is ticked in order)
    So exactly what is the impact if it is ticked and not??

    Dear srinivas,
    When u release the order, system creates one reservation no. in the production order, which has got all the materials to be issued to the order.
    1. When u issue the material to the order in MB1A, the issue qty is equal to the required qty of the order, then FI(final issue) indicator set aganist the each line item. This u can see in order---> component overview. This case weather u activate clear open resrvation in CO11n is not having any effect.
    2. Suppose ur issue is through CO11n, then if u tick this box, weather u do issue/backflush the FI is set in order and again if u try to do the issue system says that no selectable item for this order.
    i hope u r clear
    sree

  • OPK4 Settings _ Clear Open reservations

    Hi Team,
    I am having clarification on the check box "Clear Open Reservations" in OPK4. What is the use of this check box? And which business case, i can enable this check box?
    How the check box  "Clear Open Reservations" is different from TECO status?
    Assume that i have created & released  the production order with 5 qty. To produce 5 header qty, i need 5 child parts. I have produced 3 qty & set the order status as "TECO". Once the order received the status TECO, the remaining reservation qty 2 is cleared (ie, in RESB table, the "deletion indicator" is set for 2 qty). Is the check box "Clear Open Reservations" performs the above similar function?
    Thanks

    Hi Chenna,
    Thank you for the info. Suppose, i need 5 qty of items to produce 5 header item. During confirmation (in CO15), i have provided the yield qty as 2 & executing the confirmation with below cases
    Case 1:
    Yield Qty: 2
    Final Confirmation: Checked
    Clear Reservation: Not Checked
    In this case also, the reservation for remaining 3 qty will be set to "final issue"?
    Case 2:
    Yield Qty: 2
    Final Confirmation: Checked
    Clear Reservation:  Checked
    In this case also, the reservation for remaining 3 qty will be set to "final issue"?
    Case 3:
    Yield Qty: 2
    Partial Confirmation: Checked
    Clear Reservation:  Checked
    In this case also, the reservation for remaining 3 qty will be set to "final issue"?
    Thanks

  • Report to check open reservations for production orders where GI not posted

    Hi experts,
    Can we get reservation details from any report/ table for production order where material has not been issued, report should also display the value of the reserved material.
    I could not find desired details in RESB (it has price but not value) and MB25.
    Thanks in advance, useful ansers will be rewarded.
    Thnx
    Anand

    Hello Anand,
    there is no report but you may use the production order info system with list "components" and create a layout contaning the issued quantity and/or the final issue indicator. With a correct sorting, the list should show all orders with non-issued components at the top.
    Regards, Andreas

  • Final Issue Indicator not set in maitnenance order after ECC 6.0 upgrade

    Hi,
    We encounter this problem after upgrading to ECC6.0 from SAP R/3 4.6C
    Final issue indicator (RESBD-KZEAR) is not being set in maintenance order (IW33) for sub-component non-stock items in General Data page
    Would be great if anyone could guide in this regard
    Detailed Scenario:
    1) Maintenance Order is created (IW31) is created in plant A
    2) For non-stock items, reservation created by maintenance order creates a purchase requisition
    3) Account Assigned STO (against maintenance order) is created from purchase requisition
    4) Transfer Posting done from Plant B (351 movement) for complete qty
    5) GR at Plant A done (101 movement) for complete qty.
    6) Final Issue Indicator is not set in General Data page eventhough the complete quantity is delivered.
    Thanks
    Edited by: muthukumarv on Apr 2, 2010 8:59 PM
    Edited by: muthukumarv on Apr 2, 2010 9:00 PM
    Edited by: muthukumarv on Apr 2, 2010 9:03 PM

    Hi,
    Please check in the STO if the "Delivery completed" indicator is checked or not?
    If Yes, then search some correction notes of SAP and get it implemented or raise OSS message with SAP to get the Final Issue indicator to be set in maintenance order.
    If No, then ask your MM consultants to investigate that. They can check the config of "Goods Receipt" Or check if the total quantity GR has been done Or some Under delivery/ Over delivery tolerance has been maintained.
    Thanx.
    Nilmoni.

  • Mass change final issue indicator in production order

    Hi
    Is there any report can show final issue indicator for all production order? How can I mass change the indicator?

    Hi,
      In reports such as COOIS and COHV you can select in the initial screen "List: Components" and check your "Change layouts" to view the report with the "Final Issue" indicator.
    But you cannot do a mass change in this option. One way is : You can just select the particular order -> goto Component Overview of the order to be changed and do the necessary changes and save to get the required result.
    -Thaila Shree

  • Final issue indicator on the general data button on the work order

    Hi Gurus,
    can anybody please let me know why the final issue check box is checked automatically even before the goods are issued via migo against the work orders. This check box is on the general data tab of the material entered on the components tab of the work order. Please help. As a result of this, the store room clerk cannot issue the material againsth the work order, because this check mark is checked. I want to understand what is causing the check mark to be checked automaticallu even before tthe materials are issued out
    Thanks
    ANusa

    Hello!
    This might have occured due to completion confirmation of order before goods issue. Generally this happens if final issue indicator is set as default in completion confirmation tab. Please check and reply if problem is something else.
    Regards,
    Vaibhav Mishra
    Edited by: Mishra_Vaibhav on Jan 27, 2011 5:23 AM

  • 'Final issue' indicator automatically

    Hello,
    A flow has been developed to transfer material (assigned to network activity) from 1 plant to another plant through a stock transfer order with a specific movement type . Find that 'Final issue' on material tab is not getting flagged automatically (and reservation not getting closed) automatically on PGI of delivery from STO.
    Like to know the probable reason or the setting which does it automatically on PGI on complete quantity.
    With regards,
    Mrinal

    Hi Ahmed,
    We have created a new flow in PS , wherein materials are transferred from one plant to another plant through Stock transport . A new movement type (copy of MT 641) has been created for STO so that the cost is booked on project on PGI from STO Delivery.Materials are assigned to different activities (assigned to different plant) under the same network.
    Observe that the reservations on WBS on source plant is not getting reduced on PGI of delivery from STO.
    With regards,
    Mrinal

  • Findind Cleared open items for G/L account master (company code)

    Hi All,
        I wanted to incorporate one logic to find the whether open items have been cleared or not for G/L account master (company code).
    Currently, I am fetching the data from SKB1 based on company code.
    Then i am passing the GL account to BSIS table to find the whether all the accounts have been cleared or not.
    Is this the correct procudure or any other procedure to find the GL account is been cleared for open items.
    Is there any Function modules to find this any way.

    Thnkx.
    I am writting a report where i need to check the above scenario.
    Earlier we planed to call FBL3N to check the same, but
    But i need to call FBL3N in my report program. Which is not correct procedure
    Hence we taught to take all GL accounts from SKB1 and pass it to BSIS table and check.
    Is there any other way rather than the above one.

  • Unable to clear open items for Bank GL

    Hi Experts,
    I have scenario where I am unable to clear bank clearing account through F-03.
    The Bank Clearing GL account master is NOT managed as "Balances in Local Currency only'
    Current issue is:
    Invoice is posted with USD currency
    Ex: $100 (1st April 2013, Exchange rate @ INR 50)
    The payment is posted in INR 4900 (1st December 2013, Exchange rate @ INR 49) .
    Here the balances in USD are clear with $100, but with difference in local currency which is posted as Forex gain.
    But while clearing the GL through F-03, the error is popping up ... "difference too large for clearing".
    Please help me how we can clear the balances of this GL (Which has two different currencies posted before clearing)
    Thank you.
    Best regards,
    Sri

    Hi,
    The message comes because of different document currency in Invoice and payment.
    In payment, your document currency is INR, so the system will calculate to LC1, LC2, LC3, cannot calculate back to your invoice currency, so even EUR amount is the same but the INR amount is still different.
                   Document currency     Ex Rate     Local Currency          Clearing currency
    Invoice          100EUR                   50               5,000INR                    5,000INR
    Payment      4,900INR                    1               4,900INR                    4,900INR
    If clearing currency is INR, even EUR amount is the same but you still have different in INR amount
    In my example, in F-03, when you choose the clearing currency is USD, and choose the open item list
                   Document currency     Ex Rate     Local Currency          Clearing currency
    Invoice         8,000EUR                                  10,000USD               10,992.40USD
    Payment    10,000USD                  1              10,000USD               10,000.00USD
    Screenshot in Local currency:
    Sceenshot in clearing currency: (different amount is 992.40)
    In this case, the system will created automaticall line item to Exchange gain/loss for different amount.
    You have to add one more line to offset this different amount.
    Example in my case, because of the different amount 992.40- is debit to Exchange loss by system.
    So now, I will add more line to credit  that amount again line below
    Julie

  • EBS - Reference document number search for clearing open item

    Dear Experts,
    I am currently implementing EBS with MT 940 stattement for bank reconciliation.I want to clear open item, for out going cheque, during posting by reference field (XBLNR) where cheque number maintained.As per MT 940 statement this cheques number is mentioned in 86 line as follow
    :61:1102280228DR19961,NCHK682486          //51070
    :86:47558011XYZ ROAD
    But when I import bank statement, system recognise 682486 as reference field which is in 61 line and clears the open item.
    my requirement is for outgoing check system should recognise 86 line reference and other direct payment or inter bank transfer, system should consider  61 line reference.
    I have created different posting rule for Outgoing check and direct payment/Inter bank transfer.
    I tried to find such issue in forum but did not found any help.
    If need to use search string then how to configure for this and what algorithm to be used for the same.
    looking for solution
    Regards
    Sanjay D

    Hi,
    If you are talking about line item level, then it is called Allocation Number. At the header level, it is called Reference number.
    This is controlled using the copy control for billing - at the header level control.
    The reference number & allocation number once maintained in the configuration, will show up in the Accounting doc - header level & item level, respectively.
    For example - if the customer payment always refers to his PO number, then it really helps to use the allocation number for the accounting doc line items - which helps in clearing incoming payment faster. In this case, the reference number could be our delivery number. This is one of the examples for using both Ref & allocation #'s.
    Hope, this helps!
    S. Siva

Maybe you are looking for