Clients not reporting to Site Server
Hi,
in CAS.log i found following error message on every client:
CacheManager: GetSWDistSiteSettings failed with 0x80004005. Default site settings will be used.
and only Computer and User Policy Retrieval Actions appear on Client.
Anyone an idea?
ccmmessaging is full of http errors: "Post using <xxx> security context failed due to Integrated Windows Authentication failure ... Post to http://<MP>/ccm_system_windowsauth/request failed with 0x80070005."
Did it ever work? What does mpcontrol.log tell? Any errors in the IIS logfiles?
Torsten Meringer | http://www.mssccmfaq.de
Similar Messages
-
SCCM 2012 client push occurs from site server or from distribution point?
I would like to set up client push in SCCM 2012 and I have a remote site with about 80 workstations that I would like to deploy the clients to using client push, but this remote site is VERY slow, as in less than 3Mbps slow. There is a remote DP located
at this site and I wanted to know if the remote workstations will be hammering my Site Server across the WAN (or MP I guess since the MP role is i installed on the Site Server) to request the client installation, or do the clients just request the client from
the Site Server or MP and then the client downloads to the remote DP and then the workstations install the SCCM 2012 client from the local DP at the remote site?
I just do NOT want the WAN link to become overwhelmed with workstation requests to install the client and have the Site Server have to respond to each and every workstation and download the SCCM 2012 client to each system over this slow WAN link.
How does the client push process actually work?
Thank youThe initial files will come from the primary site server. The rest (the biggest part) will come of the distribution point. See for a good read (even though it's more about secondary sites), this post of Jason:
http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
We have recently upgraded our WSUS server to Windows 2012 R2. Now none of the PCs reporting their status to the WSUS server and not getting updates at all. The PCs are contacting the Server but not reporting their status. Stopped the Firewall on Client and
Server. BITS and windows updates services are running.
Record the system time of the Windows 7 client.
Reboot the Windows 7 client.
Run this command from a command prompt: wuauclt /resetauthorization /detectnow.
Wait =30= minutes.
Performed the above steps. Please see the updates logs from a client.
2015-03-16 12:48:44:617
1040 15a4
Shutdwn user declined update at shutdown
2015-03-16 12:48:44:617
1040 15a4
AU Successfully wrote event for AU health state:0
2015-03-16 12:48:44:618
1040 15a4
AU AU initiates service shutdown
2015-03-16 12:48:44:649
1040 15a4
AU ########### AU: Uninitializing Automatic Updates ###########
2015-03-16 12:48:46:506
1040 15a4
Report CWERReporter finishing event handling. (00000000)
2015-03-16 12:48:46:584
1040 15a4
Service *********
2015-03-16 12:48:46:584
1040 15a4
Service ** END ** Service: Service exit [Exit code = 0x240001]
2015-03-16 12:48:46:584
1040 15a4
Service *************
2015-03-16 12:54:23:139
1024 1060
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0400) ===========
2015-03-16 12:54:23:214
1024 1060
Misc = Process: C:\Windows\system32\svchost.exe
2015-03-16 12:54:23:264
1024 1060
Misc = Module: c:\windows\system32\wuaueng.dll
2015-03-16 12:54:23:139
1024 1060
Service *************
2015-03-16 12:54:23:264
1024 1060
Service ** START ** Service: Service startup
2015-03-16 12:54:23:265
1024 1060
Service *********
2015-03-16 12:54:24:262
1024 1060
Agent * WU client version 7.6.7600.320
2015-03-16 12:54:24:263
1024 1060
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-03-16 12:54:24:272
1024 1060
Agent * Access type: No proxy
2015-03-16 12:54:24:532
1024 1060
Agent * Network state: Connected
2015-03-16 12:55:17:235
1024 1060
Report CWERReporter::Init succeeded
2015-03-16 12:55:17:235
1024 1060
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-03-16 12:55:17:235
1024 1060
Agent * Prerequisite roots succeeded.
2015-03-16 12:55:17:235
1024 1060
Agent *********** Agent: Initializing global settings cache ***********
2015-03-16 12:55:17:235
1024 1060
Agent * WSUS server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:235
1024 1060
Agent * WSUS status server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:235
1024 1060
Agent * Target group: Eastwood
2015-03-16 12:55:17:235
1024 1060
Agent * Windows Update access disabled: No
2015-03-16 12:55:17:247
1024 1060
DnldMgr Download manager restoring 0 downloads
2015-03-16 12:55:17:248
1024 1060
AU ########### AU: Initializing Automatic Updates ###########
2015-03-16 12:55:17:249
1024 1060
AU # WSUS server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:249
1024 1060
AU # Detection frequency: 22
2015-03-16 12:55:17:249
1024 1060
AU # Target group: Eastwood
2015-03-16 12:55:17:249
1024 1060
AU # Approval type: Scheduled (Policy)
2015-03-16 12:55:17:249
1024 1060
AU # Scheduled install day/time: Every day at 3:00
2015-03-16 12:55:17:249
1024 1060
AU # Auto-install minor updates: Yes (Policy)
2015-03-16 12:55:17:249
1024 1060
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-03-16 12:55:17:249
1024 1060
AU # Will display featured software notifications (User preference)
2015-03-16 12:55:17:259
1024 1060
Agent Switching to hardware-verified ClientId.
2015-03-16 12:55:17:260
1024 1060
AU Setting AU scheduled install time to 2015-03-17 07:00:00
2015-03-16 12:55:17:402
1024 1060
Report *********** Report: Initializing static reporting data ***********
2015-03-16 12:55:17:402
1024 1060
Report * OS Version = 6.1.7601.1.0.65792
2015-03-16 12:55:17:402
1024 1060
Report * OS Product Type = 0x00000030
2015-03-16 12:55:17:600
1024 1060
Report WARNING: Failed to load reporting information from WMI with hr = 80041002.
2015-03-16 12:55:17:601
1024 1060
Report * Locale ID = 1033
2015-03-16 12:55:17:654
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:655
1024 1060
AU Initializing featured updates
2015-03-16 12:55:17:655
1024 1060
AU Found 0 cached featured updates
2015-03-16 12:55:17:655
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:656
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:656
1024 1060
AU AU finished delayed initialization
2015-03-16 12:55:23:261
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 12:55:41:121
1024 1074
AU Triggering AU detection through DetectNow API
2015-03-16 12:55:41:122
1024 1074
AU Triggering Online detection (non-interactive)
2015-03-16 12:55:41:193
1024 1060
AU #############
2015-03-16 12:55:41:193
1024 1060
AU ## START ## AU: Search for updates
2015-03-16 12:55:41:193
1024 1060
AU #########
2015-03-16 12:55:41:218
1024 1060
AU <<## SUBMITTED ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 12:55:41:218
1024 1194
Agent *************
2015-03-16 12:55:41:218
1024 1194
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-16 12:55:41:218
1024 1194
Agent *********
2015-03-16 12:55:41:218
1024 1194
Agent * Online = Yes; Ignore download priority = No
2015-03-16 12:55:41:218
1024 1194
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-03-16 12:55:41:218
1024 1194
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-03-16 12:55:41:218
1024 1194
Agent * Search Scope = {Machine}
2015-03-16 12:55:41:218
1024 1194
Setup Checking for agent SelfUpdate
2015-03-16 12:55:41:219
1024 1194
Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
2015-03-16 12:55:45:440
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:45:893
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:45:897
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMPD98D.tmp with dwProvFlags 0x00000080:
2015-03-16 12:55:45:979
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:014
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:46:019
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:050
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:46:055
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:093
1024 1194
Setup Determining whether a new setup handler needs to be downloaded
2015-03-16 12:55:46:093
1024 1194
Setup SelfUpdate handler is not found. It will be downloaded
2015-03-16 12:55:46:093
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:52:237
1024 1194
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:52:237
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:53:377
1024 1194
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:53:502
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:56:705
1024 1194
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:56:896
1024 1194
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2015-03-16 12:56:01:618
1024 1060
AU AU received policy change subscription event
2015-03-16 13:00:00:824
1024 1194
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2015-03-16 13:00:00:824
1024 1194
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://ewd-srv-01.resultstel.net:8530/ClientWebService/client.asmx
2015-03-16 13:00:01:001
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:00:01:001
1024 1194
PT Initializing simple targeting cookie, clientId = f86ac648-7394-46eb-8f40-eb605f77d86b, target group = Eastwood, DNS name = ewd-wc-420-235.resultstel.net
2015-03-16 13:00:01:001
1024 1194
PT Server URL = http://ewd-srv-01.resultstel.net:8530/SimpleAuthWebService/SimpleAuth.asmx
2015-03-16 13:00:01:833
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {F92A18E7-8784-4828-89C9-F80085A422A7}.202, hr = 80041002
2015-03-16 13:00:02:004
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {C735DBB1-06B4-49F2-815F-97976B4B86A4}.102, hr = 80041002
2015-03-16 13:00:08:676
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {6A8FE277-1048-48B1-803B-4580C15BBDF1}.100, hr = 80041002
2015-03-16 13:07:37:795
1024 1194
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2015-03-16 13:07:37:795
1024 1194
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://ewd-srv-01.resultstel.net:8530/ClientWebService/client.asmx
2015-03-16 13:07:37:988
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:07:41:893
1024 1194
PT WARNING: GetExtendedUpdateInfo failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200
2015-03-16 13:07:41:893
1024 1194
PT WARNING: SOAP Fault: 0x000190
2015-03-16 13:07:41:893
1024 1194
PT WARNING: faultstring:Fault occurred
2015-03-16 13:07:41:893
1024 1194
PT WARNING: ErrorCode:InternalServerError(5)
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Message:(null)
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetExtendedUpdateInfo"
2015-03-16 13:07:41:893
1024 1194
PT WARNING: ID:4cd69d60-d69b-4591-88ad-5687cdda3265
2015-03-16 13:07:41:893
1024 1194
PT WARNING: PTError: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: GetExtendedUpdateInfo_WithRecovery: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Sync of Extended Info: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: SyncServerUpdatesInternal failed : 0x8024400e
2015-03-16 13:07:41:914
1024 1194
Agent * WARNING: Exit code = 0x8024400E
2015-03-16 13:07:41:914
1024 1194
Agent *********
2015-03-16 13:07:41:914
1024 1194
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-16 13:07:41:914
1024 1194
Agent *************
2015-03-16 13:07:41:914
1024 1194
Agent WARNING: WU client failed Searching for update with error 0x8024400e
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:930
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:930
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:42:021
1024 14f4
AU >>## RESUMED ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 13:07:42:021
1024 14f4
AU # WARNING: Search callback failed, result = 0x8024400E
2015-03-16 13:07:42:021
1024 14f4
AU # WARNING: Failed to find updates with error code 8024400E
2015-03-16 13:07:42:021
1024 14f4
AU #########
2015-03-16 13:07:42:021
1024 14f4
AU ## END ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 13:07:42:021
1024 14f4
AU #############
2015-03-16 13:07:42:021
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:42:021
1024 14f4
AU AU setting next detection timeout to 2015-03-16 22:07:42
2015-03-16 13:07:42:022
1024 14f4
AU Setting AU scheduled install time to 2015-03-17 07:00:00
2015-03-16 13:07:42:022
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:42:022
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:46:919
1024 1194
Report REPORT EVENT: {CB48FD20-D762-4E5E-8CCA-5C27F3CFA04A}
2015-03-16 13:07:41:913-0400 1
148 101
{00000000-0000-0000-0000-000000000000}
0 8024400e
AutomaticUpdates Failure
Software Synchronization Windows Update Client failed to detect with error 0x8024400e.
2015-03-16 13:07:47:022
1024 1194
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-03-16 13:07:47:022
1024 1194
Report WER Report sent: 7.6.7600.320 0x8024400e 00000000-0000-0000-0000-000000000000 Scan 101 Managed
2015-03-16 13:07:47:022
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:14:23:923
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:14:23:923
1024 1194
Report Uploading 1 events using cached cookie, reporting URL = http://ewd-srv-01.resultstel.net:8530/ReportingWebService/ReportingWebService.asmxDon thank you for the reply.
But I do have the same issue on the other PCs as well on which WMI is good. And also i pointed the above PC to my primary WSUS server which is running windows 2003 and it reported successfully and downloaded the approved updates.
please see the below logs from the same PC after pointing to our wsus running on win2003.
2015-03-17 14:41:08:507
1020 f1c
Inv # Talking to WSUS server = http://atl-wsus-1:8530
2015-03-17 14:41:08:508
1020 f1c
Inv # Downloading Rule file from = http://atl-wsus-1:8530/Inventory/InventoryRules.cab
2015-03-17 14:41:08:508
1020 53c
AU #########
2015-03-17 14:41:08:508
1020 53c
AU ## END ## AU: Search for updates [CallId = {54490DE2-CF7B-4017-A553-6C8C1532E621}]
2015-03-17 14:41:08:508
1020 53c
AU #############
2015-03-17 14:41:08:510
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:510
1020 53c
AU Featured notifications is disabled.
2015-03-17 14:41:08:510
1020 53c
AU AU setting next detection timeout to 2015-03-18 16:13:54
2015-03-17 14:41:08:510
1020 53c
AU Setting AU scheduled install time to 2015-03-18 07:00:00
2015-03-17 14:41:08:510
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {6C2547EE-DC7B-4080-8884-A040572C5EC4}.204, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {673027F3-841E-4215-88BE-A0BFB456B2B1}.207, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approved 5 update(s) for download (NOT for Ux)
2015-03-17 14:41:08:510
1020 53c
AU #############
2015-03-17 14:41:08:511
1020 53c
AU ## START ## AU: Download updates
2015-03-17 14:41:08:511
1020 53c
AU #########
2015-03-17 14:41:08:511
1020 53c
AU # Approved updates = 5
2015-03-17 14:41:08:512
1020 53c
AU AU initiated download, updateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202, callId = {F3389077-03F0-4625-83EF-CAAEBA8ED147}
2015-03-17 14:41:08:513
1020 53c
AU AU initiated download, updateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203, callId = {B94BF4E5-5709-4D22-924A-5C5B8D4712C9}
2015-03-17 14:41:08:514
1020 53c
AU AU initiated download, updateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203, callId = {D330B2E0-CA38-4ED9-894A-36717C01F09A}
2015-03-17 14:41:08:515
1020 53c
AU AU initiated download, updateId = {6C2547EE-DC7B-4080-8884-A040572C5EC4}.204, callId = {B6B35AC2-9BC1-4CFA-8421-D666C79464AD}
2015-03-17 14:41:08:516
1020 53c
AU AU initiated download, updateId = {673027F3-841E-4215-88BE-A0BFB456B2B1}.207, callId = {F0D00A6F-36BC-4680-9BE4-4005742A2C93}
2015-03-17 14:41:08:516
1020 53c
AU Setting AU scheduled install time to 2015-03-18 07:00:00
2015-03-17 14:41:08:516
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:516
1020 53c
AU AU setting pending client directive to 'Download Progress'
2015-03-17 14:41:08:518
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:518
1020 53c
AU # Pending download calls = 5
2015-03-17 14:41:08:518
1020 53c
AU <<## SUBMITTED ## AU: Download updates
2015-03-17 14:41:08:520
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:964
1020 f1c
Misc Validating signature for C:\Windows\SoftwareDistribution\Inventory\InventoryRule\InventoryRules.cab with dwProvFlags 0x00000080:
2015-03-17 14:41:08:976
1020 f1c
Misc Microsoft signed: NA
2015-03-17 14:41:08:993
1020 f1c
Inv # Inventory Rule id = 8226C3A1-70D4-4848-B441-1555AC820A23, version = 1.0
2015-03-17 14:41:09:022
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:086
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:118
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:150
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:182
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:214
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:246
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:278
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:310
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:342
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:374
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:406
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:438
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:471
1020 f1c
PT WARNING: PTError: 0x80041002
2015-03-17 14:41:10:590
1020 f1c
Inv #########
2015-03-17 14:41:10:590
1020 f1c
Inv ## END ## Inv: Inventory Collection
2015-03-17 14:41:10:590
1020 f1c
Inv #############
2015-03-17 14:41:10:592
1020 f1c
DnldMgr *************
2015-03-17 14:41:10:592
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:10:592
1020 f1c
DnldMgr *********
2015-03-17 14:41:10:592
1020 f1c
DnldMgr * Call ID = {F3389077-03F0-4625-83EF-CAAEBA8ED147}
2015-03-17 14:41:10:592
1020 f1c
DnldMgr * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:10:592
1020 f1c
DnldMgr * Updates to download = 1
2015-03-17 14:41:10:592
1020 f1c
Agent * Title = Security Update for Windows 7 (KB3029944)
2015-03-17 14:41:10:592
1020 f1c
Agent * UpdateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202
2015-03-17 14:41:10:592
1020 f1c
Agent * Bundles 1 updates:
2015-03-17 14:41:10:592
1020 f1c
Agent * {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202
2015-03-17 14:41:10:598
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202] ***********
2015-03-17 14:41:10:599
1020 f1c
DnldMgr * Queueing update for download handler request generation.
2015-03-17 14:41:10:599
1020 f1c
DnldMgr Generating download request for update {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202
2015-03-17 14:41:13:863
1020 f1c
Handler Generating request for CBS update CF9A0A9F-EA32-4B84-8B11-647F8DE3432C in sandbox C:\Windows\SoftwareDistribution\Download\4fa5441bcc144c4a7917304858841f6b
2015-03-17 14:41:13:863
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:13:863
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:13:863
1020 f1c
Handler Adding windows6.1-kb3029944-x86-express.cab (entire file) to request list.
2015-03-17 14:41:13:864
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:13:864
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202] ***********
2015-03-17 14:41:16:436
1020 f1c
DnldMgr * BITS job initialized, JobId = {675985CD-3133-4157-9D02-06CC33C29C49}
2015-03-17 14:41:16:473
1020 f1c
DnldMgr * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2015/01/windows6.1-kb3029944-x86-express_0c21886fd0931285b2d3a29773d3673c947f60b3.cab to C:\Windows\SoftwareDistribution\Download\4fa5441bcc144c4a7917304858841f6b\windows6.1-kb3029944-x86-express.cab
(full file).
2015-03-17 14:41:16:644
1020 f1c
Agent *********
2015-03-17 14:41:16:644
1020 f1c
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:644
1020 f1c
Agent *************
2015-03-17 14:41:16:645
1020 f1c
DnldMgr *************
2015-03-17 14:41:16:645
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:645
1020 f1c
DnldMgr *********
2015-03-17 14:41:16:645
1020 f1c
DnldMgr * Call ID = {B94BF4E5-5709-4D22-924A-5C5B8D4712C9}
2015-03-17 14:41:16:645
1020 f1c
DnldMgr * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:16:645
1020 f1c
DnldMgr * Updates to download = 1
2015-03-17 14:41:16:645
1020 f1c
Agent * Title = Security Update for Windows 7 (KB3004361)
2015-03-17 14:41:16:645
1020 f1c
Agent * UpdateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203
2015-03-17 14:41:16:645
1020 f1c
Agent * Bundles 1 updates:
2015-03-17 14:41:16:645
1020 f1c
Agent * {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203
2015-03-17 14:41:16:648
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203] ***********
2015-03-17 14:41:16:649
1020 f1c
DnldMgr * Queueing update for download handler request generation.
2015-03-17 14:41:16:649
1020 f1c
DnldMgr Generating download request for update {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203
2015-03-17 14:41:16:678
1020 f1c
Handler Generating request for CBS update 151B27A0-4EA8-428F-BE06-C90A3CF0C2CA in sandbox C:\Windows\SoftwareDistribution\Download\963019da42f4a0388fdc4337be401b25
2015-03-17 14:41:16:678
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:16:678
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:16:678
1020 f1c
Handler Adding windows6.1-kb3004361-x86-express.cab (entire file) to request list.
2015-03-17 14:41:16:687
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:16:687
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203] ***********
2015-03-17 14:41:16:732
1020 f1c
DnldMgr * BITS job initialized, JobId = {27F85F04-0E56-4BFA-93E3-4D6BCB3ECB4F}
2015-03-17 14:41:16:758
1020 f1c
DnldMgr * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2014/12/windows6.1-kb3004361-x86-express_47f37958063afd2521ca42de8904b55d1aa85b89.cab to C:\Windows\SoftwareDistribution\Download\963019da42f4a0388fdc4337be401b25\windows6.1-kb3004361-x86-express.cab
(full file).
2015-03-17 14:41:16:809
1020 f1c
Agent *********
2015-03-17 14:41:16:809
1020 f1c
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:809
1020 f1c
Agent *************
2015-03-17 14:41:16:811
1020 f1c
DnldMgr *************
2015-03-17 14:41:16:811
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:811
1020 f1c
DnldMgr *********
2015-03-17 14:41:16:811
1020 f1c
DnldMgr * Call ID = {D330B2E0-CA38-4ED9-894A-36717C01F09A}
2015-03-17 14:41:16:811
1020 f1c
DnldMgr * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:16:811
1020 f1c
DnldMgr * Updates to download = 1
2015-03-17 14:41:16:811
1020 f1c
Agent * Title = Security Update for Windows 7 (KB3031432)
2015-03-17 14:41:16:811
1020 f1c
Agent * UpdateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203
2015-03-17 14:41:16:811
1020 f1c
Agent * Bundles 1 updates:
2015-03-17 14:41:16:811
1020 f1c
Agent * {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203
2015-03-17 14:41:16:814
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203] ***********
2015-03-17 14:41:16:815
1020 f1c
DnldMgr * Queueing update for download handler request generation.
2015-03-17 14:41:16:815
1020 f1c
DnldMgr Generating download request for update {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203
2015-03-17 14:41:16:843
1020 f1c
Handler Generating request for CBS update EE556F37-7EAC-42B3-BD29-653F98E6E364 in sandbox C:\Windows\SoftwareDistribution\Download\7db602a9c625e53b175ecb83170441ba
2015-03-17 14:41:16:843
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:16:843
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:16:843
1020 f1c
Handler Adding windows6.1-kb3031432-x86-express.cab (entire file) to request list.
2015-03-17 14:41:16:844
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:16:845
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203] ***********
2015-03-17 14:41:16:881
1020 f1c
DnldMgr * BITS job initialized, JobId = {6C5B3B60-DB8B-4B6F-9E40-D99CA43B366D}
2015-03-17 14:41:16:906
1020 f1c
DnldMgr * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2015/01/windows6.1-kb3031432-x86-express_fb5326e90facfe6de39cf44fc4ed5ec630968ba5.cab to C:\Windows\SoftwareDistribution\Download\7db602a9c625e53b175ecb83170441ba\windows6.1-kb3031432-x86-express.cab
(full file). -
ZAM Clients not reporting unless requested
Hello. It appears that most of the clients (just over 2,000 PCs) in my environment are not reporting inventory when scheduled. If I run a report to find all workstations, and then select them and click on Scan Selected Workstation now (one page at a time, it takes a while), they eventually show up.
I only have one collection option set and one collection schedule.
On a couple sample PCs not reporting, I found that the following registry entry is blank:
HKLM\Software\Tally Systems Corp\TSCensus\CollectionClient\WifName
The following registry entry uses the host name, not the IP address, but every problematic PC I've tested can ping the host name.
HKLM\Software\Tally Systems Corp\TSCensus\CollectionClient\HostName
We're still mostly (95%) a Win2k environment, so PC a firewall is not the issue.
In the CPS.INI files, all I have are two section headings, no data. What else should be in there?
[CollectionServer]
[CollectionClient]
I added the "diagnostic=2" line at the bottom of the CPS.INI file on my workstation (WinXP) and I get the Collection Client and ColW32 results windows. They are long, but I'll include mine from today. My laptop is wireless, so it won't have an IP address and can't connect to the Asset Inventory server (WIASSET) right away. Thanks for reading, I hope someone can help.
Collection Client Diagnostic
10/12/07 08:00:21 Collection Client initialized
10/12/07 08:00:21 C:\Program Files\Novell\Zenworks\Asset Managementt\bin\CClient.exe
10/12/07 08:00:21 Client Version 7.50.0011 built Nov 2 2006 00:03:32.
10/12/07 08:00:21 Options= First:0, Port:0, Online:0, Svc:1, SN:0
10/12/07 08:00:21 EstablishOperatingMode
10/12/07 08:00:21 running in Normal mode
10/12/07 08:00:21 Changing to Idle Mode
10/12/07 08:00:21
10/12/07 08:00:21 Client is running as a service
10/12/07 08:00:21 ...get user token via explorer pid
10/12/07 08:00:21 launchApp: WinNT class, 32-bit
10/12/07 08:00:21 Running as a service, but didn't get token, will launch colw32 normally
10/12/07 08:00:21 collector_init Starting
10/12/07 08:00:21 init_options Starting.
10/12/07 08:00:21 init_options Done OK.
10/12/07 08:00:22 collector_init Done OK.
10/12/07 08:00:22 ExecAllTests Starting.
10/12/07 08:00:23 ExecAllTests Done OK.
10/12/07 08:00:23 have collector connection info.
10/12/07 08:00:23 connection info acquired from collector
10/12/07 08:00:23 conninfo - lang: 1, plat: 1, cfgid:
10/12/07 08:00:23 conninfo - cname: 9M2FLB1, uname: , LANadd: 0015C5464395,sn: 9M2FLB1
10/12/07 08:00:23 conninfo - oid: 5B7307B6-4E93-4237-B970-D6F1F407E7EA
10/12/07 08:00:23 CreateListener: port=7461; inbox=C:\Program Files\Novell\Zenworks\Asset Managementt\bin\InboxCC
10/12/07 08:00:23 CWinsockMsgServer::SetLocalHostInfo() completed.
10/12/07 08:00:24 CCollectionServer::SetRemoteHostInfo: 00000000-0000-0000-0000-000000000000 - WIASSET - 7460
10/12/07 08:00:39 CInetAddr.GetIP failed.
10/12/07 08:00:39 server connection failure
10/12/07 08:00:39 Listener created.
10/12/07 08:00:39 Usage Monitor stopped.
10/12/07 08:00:39 initial connect state: 2
10/12/07 08:30:21 OnTimer, entry: timer:30, retry count:0
10/12/07 08:30:21 OnTimer init state: ConnState:2, Retrying:1, Lost:0
10/12/07 08:30:21 ConnectForScanMode to WIASSET (0.0.0.0)
10/12/07 08:30:21 29xID: LAN addr: 0015C5464395
10/12/07 08:30:21 Checksum: .\Catalog.Ini is h2b1ee (3031 bytes)
10/12/07 08:30:22 Connected to WIASSET
10/12/07 08:30:22 DUN state change from 2 to 1
10/12/07 09:00:21 OnTimer, entry: timer:60, retry count:0
10/12/07 09:00:21 OnTimer init state: ConnState:1, Retrying:0, Lost:0
10/12/07 09:30:21 OnTimer, entry: timer:90, retry count:0
10/12/07 09:30:21 OnTimer init state: ConnState:1, Retrying:0, Lost:0
10/12/07 10:00:21 OnTimer, entry: timer:120, retry count:0
10/12/07 10:00:21 OnTimer init state: ConnState:1, Retrying:0, Lost:0
10/12/07 10:10:45 Received request for identity information.
10/12/07 10:10:46 Sent Identity info
ColW32 Default Trace Window
10/12/07 08:00:22 Options initialized OK
10/12/07 08:00:22 Is First Scan
10/12/07 08:00:22 Initialize collector succeeded
10/12/07 08:00:22 Workstation Id: 00000000-0000-0000-0000-000000000001
10/12/07 08:00:22 entering ReaperTestList::ExecAllTests()
10/12/07 08:00:22 running test #499 BIOS Dump (F000)
10/12/07 08:00:22 running test #498 BIOS Dump (E000)
10/12/07 08:00:22 running test #2 Operating System
10/12/07 08:00:22 test #99 Gather Files disabled
10/12/07 08:00:22 Test_WMI: Qualifying
10/12/07 08:00:22 Test_WMI: Not Qualified
10/12/07 08:00:22 test #29 WMI Discovery disabled
10/12/07 08:00:22 test #131 Bus disabled
10/12/07 08:00:22 test #628 USB Device Enumerator disabled
10/12/07 08:00:22 test #472 USB Discovery disabled
10/12/07 08:00:22 test #70 Keyboard disabled
10/12/07 08:00:22 test #80 Mouse disabled
10/12/07 08:00:22 test #450 Logical Drive Discovery disabled
10/12/07 08:00:22 test #453 Unknown disabled
10/12/07 08:00:22 test #454 Physical Drive Discovery disabled
10/12/07 08:00:22 test #451 Logical Drive Recognition disabled
10/12/07 08:00:22 test #425 Modem disabled
10/12/07 08:00:22 running test #12 CPU
10/12/07 08:00:22 ttCPU: 0 586 6 E08 2
10/12/07 08:00:22 Cpu BrandID:00
10/12/07 08:00:22 Hyper-Threading Technology, NumLogicalCPUs=2
10/12/07 08:00:22 Cores this CPU: 2
10/12/07 08:00:22 loaded: 1, userrdtsc: 0, isw95: 0
10/12/07 08:00:22 Driver RDTSC Speed Test
10/12/07 08:00:22 1833.45 1833.87 1836.65 1832.21 1837.04
10/12/07 08:00:22 1834.81 1835.59 1836.39 1833.00 1835.18
10/12/07 08:00:22 1837.79 1833.19 1835.95 1834.83 1834.74
10/12/07 08:00:22 1833.68 1835.09 1834.04 1834.33 1834.81
10/12/07 08:00:22 1831.43 1831.34 1836.92 1836.24 1832.21
10/12/07 08:00:22 1837.04 1835.04 1832.82 1833.37 1830.95
10/12/07 08:00:22 1834.47 1832.89 1834.43 1835.36 1832.40
10/12/07 08:00:22 1834.36 1834.75 1832.89 1835.53 1834.04
10/12/07 08:00:22 1831.69 1832.11 1835.49 1833.84 1832.53
10/12/07 08:00:22 1833.11 1833.94 1836.04 1833.30 1835.75
10/12/07 08:00:22 1830.73 1833.01 1836.23 1833.53 1835.01
10/12/07 08:00:22 1833.47 1831.50 1832.40 1833.98 1833.81
10/12/07 08:00:22 1836.24 1831.92 1835.10 1834.56 1830.73
10/12/07 08:00:22 1833.79 1833.15 1831.60 1836.01 1830.60
10/12/07 08:00:22 1830.14 1834.14 1834.59 1835.82 1833.42
10/12/07 08:00:22 1833.18 1835.20 1832.72 1833.08 1834.10
10/12/07 08:00:22 1833.89 1836.04 1835.85 1831.96 1833.59
10/12/07 08:00:22 1835.75 1833.42 1834.30 1835.36 1834.71
10/12/07 08:00:22 1837.85 1833.18 1837.82 1832.34 1836.33
10/12/07 08:00:22 1832.43 1834.96 1834.03 1835.98 1832.77
10/12/07 08:00:22 ABM: median = 1834.81; maxlimit = 1926.00; minlimit = 1743.00
10/12/07 08:00:22 Avetime: 1834.591412
10/12/07 08:00:22 Cpu BrandID:00
10/12/07 08:00:22 Hyper-Threading Technology, NumLogicalCPUs=2
10/12/07 08:00:22 Cores this CPU: 2
10/12/07 08:00:22 loaded: 1, userrdtsc: 0, isw95: 0
10/12/07 08:00:22 Driver RDTSC Speed Test
10/12/07 08:00:22 1832.15 1832.95 1833.23 1832.25 1836.40
10/12/07 08:00:22 1836.07 1830.14 1831.13 1833.45 1833.50
10/12/07 08:00:22 1832.02 1834.35 1832.10 1836.33 1833.18
10/12/07 08:00:22 1833.96 1833.51 1836.00 1835.59 1832.57
10/12/07 08:00:22 1837.24 1836.53 1836.59 1835.46 1832.31
10/12/07 08:00:22 1829.82 1833.75 1830.03 1831.02 1832.80
10/12/07 08:00:22 1830.79 1833.95 1832.53 1829.63 1833.57
10/12/07 08:00:22 1833.29 1835.59 1834.53 1834.17 1833.65
10/12/07 08:00:22 1833.18 1832.75 1835.61 1836.04 1837.30
10/12/07 08:00:22 1832.75 1832.68 1833.01 1834.40 1832.85
10/12/07 08:00:22 1833.65 1835.14 1833.47 1834.81 1835.14
10/12/07 08:00:22 1832.62 1831.02 1832.75 1831.92 1833.42
10/12/07 08:00:22 1831.24 1834.03 1836.49 1831.06 1833.46
10/12/07 08:00:22 1837.43 1831.58 1832.05 1830.71 1834.74
10/12/07 08:00:22 1836.23 1831.21 1834.14 1832.07 1833.66
10/12/07 08:00:22 1834.37 1833.24 1833.36 1833.05 1832.18
10/12/07 08:00:22 1833.69 1833.34 1833.27 1834.74 1834.32
10/12/07 08:00:22 1833.36 1831.03 1834.55 1830.19 1834.11
10/12/07 08:00:22 1830.09 1831.87 1832.02 1832.77 1834.30
10/12/07 08:00:22 1832.66 1831.55 1832.43 1833.39 1833.58
10/12/07 08:00:22 ABM: median = 1833.50; maxlimit = 1925.00; minlimit = 1741.00
10/12/07 08:00:22 Avetime: 1833.959807
10/12/07 08:00:22 running test #710 CPU Registry Discovery
10/12/07 08:00:22 test #615 Win95 Drivers disabled
10/12/07 08:00:22 running test #616 NT Drivers
10/12/07 08:00:22 running test #400 System Management BIOS 2.1
10/12/07 08:00:22 ttsmbios - SN from system: 9M2FLB1
10/12/07 08:00:22 SMBIOS Processor Slot Test
10/12/07 08:00:22 SMBIOS Processor:Intel CurSpeed:1833 MaxSpeed:1833
10/12/07 08:00:22 SMBIOS Processor Slots Found:1
10/12/07 08:00:22 SMBIOS Port Connector Test
10/12/07 08:00:22 SMBIOS Port Connectors Found:6
10/12/07 08:00:22 ttsmbios - Manufacturer from BIOS: Dell Inc.
10/12/07 08:00:22 ttsmbios - Manufacturer from system: Dell Inc.
10/12/07 08:00:22 ttsmbios - Manufacturer from Baseboard: Dell Inc.
10/12/07 08:00:22 ttsmbios - Manufacturer from Enclosure: Dell Inc.
10/12/07 08:00:22 test #401 System Management BIOS 2.0 disabled
10/12/07 08:00:22 running test #613 CPU Recognition
10/12/07 08:00:22 SMBIOS CurSpeed/MaxSpeed: 1833/1833
10/12/07 08:00:22 running test #410 Plug And Play
10/12/07 08:00:22 running test #420 PCI
10/12/07 08:00:22 running test #402 PCI Chipset Identification
10/12/07 08:00:22 running test #26 DMI 2.0 Components
10/12/07 08:00:22 DmiRegister failed: -1
10/12/07 08:00:22 running test #620 Memory Module Socket Recognition
10/12/07 08:00:22 running test #182 Compaq System ID
10/12/07 08:00:22 running test #609 HP Identification
10/12/07 08:00:22 IsHP: 0
10/12/07 08:00:22 running test #610 Dell Identification
10/12/07 08:00:22 (DellLegacyGetSystemName2)Model1 = Latitude D620
10/12/07 08:00:22 running test #212 IBM VPD BIOS Search
10/12/07 08:00:23 running test #213 IBM VPD BIOS Interrupt
10/12/07 08:00:23 test #215 Ibm Eeprom disabled
10/12/07 08:00:23 running test #13 System Manufacturer
10/12/07 08:00:23 Test_SysMfr: Running test
10/12/07 08:00:23 Test_SysMfr: Filling in from SMBIOS
10/12/07 08:00:23 Test_SysMfr: SMBIOS serial is 9M2FLB1
10/12/07 08:00:23 System Mfr: Dell
10/12/07 08:00:23 test #606 Compaq Manageable Objects Identification disabled
10/12/07 08:00:23 test #607 Compaq EISA disabled
10/12/07 08:00:23 test #608 Compaq System Board Revision disabled
10/12/07 08:00:23 test #208 Compaq System Name disabled
10/12/07 08:00:23 test #605 Compaq SIT disabled
10/12/07 08:00:23 test #624 Compaq SN/Asset disabled
10/12/07 08:00:23 test #625 Compaq SN/Asset for NT disabled
10/12/07 08:00:23 test #202 HP ID Byte disabled
10/12/07 08:00:23 test #218 Dell System - Copyright disabled
10/12/07 08:00:23 test #214 Dell System Name from XBIOS disabled
10/12/07 08:00:23 running test #217 Dell System - Legacy
10/12/07 08:00:23 running test #10 System Information
10/12/07 08:00:23 running test #9 ROM Release Date
10/12/07 08:00:23 test #621 System Board disabled
10/12/07 08:00:23 running test #626 Docking Station Recognition
10/12/07 08:00:23 running test #619 System Fingerprint
10/12/07 08:00:23 test #600 IBM System Recognition disabled
10/12/07 08:00:23 test #601 Compaq System Recognition disabled
10/12/07 08:00:23 test #603 HP System Recognition disabled
10/12/07 08:00:23 running test #602 Dell System Recognition
10/12/07 08:00:23 test #604 Other System Recognition disabled
10/12/07 08:00:23 test #622 Default System Recognition disabled
10/12/07 08:00:23 running test #618 Field Recognized System
10/12/07 08:00:23 running test #699 System Post Process
10/12/07 08:00:23 running test #110 "On Lan"
10/12/07 08:00:23 running test #17 MIB Discovery
10/12/07 08:00:23 mib: if count: 3
10/12/07 08:00:23 mib 0: <MS TCP Loopback interface> <127.0.0.1> <255.0.0.0> <000000000000>
10/12/07 08:00:23 mib 1: <Broadcom NetXtreme 57xx Gigabit Controller - Packet Scheduler Miniport> <0.0.0.0> <0.0.0.0> <0015C5464395>
10/12/07 08:00:23 mib 2: <Intel(R) PRO/Wireless 3945ABG Network Connection - Packet Scheduler Miniport> <10.202.2.176> <255.255.255.0> <001302D56C54>
10/12/07 08:00:23 test #18 IP Address disabled
10/12/07 08:00:23 test #129 NetBIOS disabled
10/12/07 08:00:23 running test #115 NetWare Information
10/12/07 08:00:23 test #116 NT Server disabled
10/12/07 08:00:23 test #614 Video ROM disabled
10/12/07 08:00:23 test #3 CMOS disabled
10/12/07 08:00:23 test #704 VESA EDID Monitor Discovery disabled
10/12/07 08:00:23 test #705 SMART Drive Discovery disabled
10/12/07 08:00:23 test #706 Registry Drive disabled
10/12/07 08:00:23 test #707 SCSI Drives disabled
10/12/07 08:00:23 test #709 Registry Adapter Cards for NT disabled
10/12/07 08:00:23 test #901 Drive Manufacturer Reconciliation disabled
10/12/07 08:00:23 test #7 BIOS disabled
10/12/07 08:00:23 test #60 Parallel Port disabled
10/12/07 08:00:23 test #61 Serial Port disabled
10/12/07 08:00:23 test #627 USB Port Recognition disabled
10/12/07 08:00:23 test #711 Installed HotFix Discovery disabled
10/12/07 08:00:23 test #623 Network Driver Recognition disabled
10/12/07 08:00:23 test #612 LAN Card Recognition disabled
10/12/07 08:00:23 test #700 Sound Card Recognition disabled
10/12/07 08:00:23 test #701 Video Card Recognition disabled
10/12/07 08:00:23 test #702 SCSI Adapter Recognition disabled
10/12/07 08:00:23 test #703 Monitor Recognition disabled
10/12/07 08:00:23 test #455 Physical Drive Recognition disabled
10/12/07 08:00:23 test #40 Diskette disabled
10/12/07 08:00:23 test #188 CD/DVD-ROM Recognition disabled
10/12/07 08:00:23 test #708 Removable Drive Recognition disabled
10/12/07 08:00:23 test #51 Printer disabled
10/12/07 08:00:23 test #490 Device Resources NT disabled
10/12/07 08:00:23 test #491 Device Resources 95 disabled
10/12/07 08:00:23 test #492 Device Resources Recognition disabled
10/12/07 08:00:23 test #200 VMware VM Info disabled
10/12/07 08:00:23 test #204 VirtualPC VM Info disabled
10/12/07 08:00:23 test #611 Software Scan disabled
10/12/07 08:00:23 running test #640 Username
10/12/07 08:00:23 ttUser: Primary Netware
10/12/07 08:00:23 ttUser: NwUser =
10/12/07 08:00:23 ttUser: NtUser =
10/12/07 08:00:23 ttUser: GetUserName = SYSTEM
10/12/07 08:00:23 Username:
10/12/07 08:00:23 test #900 Workstation disabled
10/12/07 08:00:23 test #650 Servers disabled
10/12/07 08:00:23 test #665 Battery disabled
10/12/07 08:00:23 test #666 Battery Recognition disabled
10/12/07 08:00:23 exiting ReaperTestList::ExecAllTests()
10/12/07 08:00:23 Test_SystemPostProcess: s/n from system comp: 9M2FLB1
Thanks,
RoddYou have a few issues / potential issues in there:
1) HKLMSoftwareTally Systems CorpTSCensusCollectionClientWifName should be
empty for much of the time, so probably not an issue unless this is blank
during a scan.
2) HKLMSoftwareTally Systems CorpTSCensusCollectionClientHostName should
hold the resolveable hostname or IP address of the Collection Server. Have
you tested this by putting th IP address in instead, then restarting the
Collection Client service? This will rule out any name resolution issues
(you might also want to try a FQDN so it's definitely using DNS not
NetBIOS to resolve the name)
3) CPS.ini typically has the following:
[CollectionServer]
HostName=<coolection-server-hostname or IP adress>
[CollectionClient]
Inbox=InboxCC
But it will be initially blank (and often stays blank) if you deploy the
CLient via Remote Client Installer - I have no idea why.
4) "My laptop is wireless, so it won't have an IP address and can't
connect to the Asset Inventory server (WIASSET) right away" - it should be
able to if you restart the Collection Client after your wireless
connection is established - can you pls confirm?
From the diagnostic output:
5) 10/12/07 08:00:23 CreateListener: port=7461; inbox=C:Program
FilesNovellZenworksAsset ManagementtbinInboxCC
I'm guessing the double 't' in "Asset Managementt" is something you
configured by accident, e.g. a typo when using RCI? Not sure if this
could be relevant.
6) 10/12/07 08:00:39 server connection failure
and
10/12/07 08:30:21 ConnectForScanMode to WIASSET (0.0.0.0)
Looks like the Client can't connect to your Collection Server as it can't
resolve it (0.0.0.0) at the time the Client service starts. Try
configuring with the IP address as in (2) above: If the Client cannot
connect, I'm pretty sure it retries every 30 minutes - but it may or may
not try to re-resolve the address... so if it caches WIASSET as 0.0.0.0 it
may never reconnect automagically.
Sending the "scan now" signal from the server will wake it up & it sounds
like this sorts out the name resolution issue (if that's what it is).
7) 10/12/07 10:10:45 Received request for identity information.
10/12/07 10:10:46 Sent Identity info
FYI this is Network Discovery (coincidentally) scanning the machine - so
you definitely have IP connectivity by this point in time (at )*:30 by the
look of it).
- What is the Collection Schedule set to (Once, Daily, Weekly etc.) and
does it have an end date set?
- Do you have any machine type filters set in the Collection Option Set?
- Is the Collection Option Set associated to the Collection Schedule? -
I too have many clients that have not reported to the Wsus Server.
The clients are listed in the All Computers group of WSUS
I have created target groups
The computers are listed in the correct target groups
I have approved update for the target group
Clients are not reporting at all
ThanksI too have many clients that have not reported to the Wsus Server.
The computers are listed in the correct target groups
Clients are not reporting at all
What do you mean by "not reporting"... they're listed in the console? What is the "Last Contact" date? What is the "Last Reported Date".
Run a detection event on one of the clients and post the results from the WindowsUpdate.log.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
My MVP Profile:
http://mvp.support.microsoft.com/profile/Lawrence.Garvin
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Client Upgrade on Primary Site Server
This should be an easy question but I really want confirmation.
When you perform a Cumulative Update does the Update upgrade the client also on your primary site server? If so do when you create a device collection for x86/x64 clients do you exclude the site server from getting push?Hi,
No the SCCM Client stays at version 5.00.7958.1000 on the primary site.
If you wanted you could upgrade the SCCM client on the primary manually by running.
C:\Program Files\Microsoft Configuration Manager\hotfix\KB2970177\Client\x64\configmgr2012ac-r2-kb2970177-x64.msp and then exclude it from the below collection or let it go out automatically.
This is from an older version but the principle is still the same.
http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
You can go straight from R2 to CU2. You do not need to install CU1 first. -
Forefront clients not reporting correctly
Hi guys
Here at work, we have 2 Forefront management servers which are being used to provide policies for a large number of different managed customers (different networks, domains, etc).
We're having an issue where some FEP clients are updating correctly and working fine but the Forefront reporting on the management server is saying otherwise. I've noticed that for some clients, the policy showing as installed when looking at the
registry isn't tying up with what the report console shows.
I've tried re-applying the required policies to some of the clients for a test but this has made no difference. I can't see any pending actions on the MOM console, etc.
Any advice greatly appreciated.Hi,
Did the Forefront Client Security Management Server computer display as an
agent-managed computer on MOM Administrator console and appear in Forefront Client Security reports? If not, maybe it is due to the FCS Management Server computer does not communicate correctly with the collection server. Please make sure that you have installed
the MOM agent on the FCS Management Server computer. In addition, I would appreciate it if you can provide some screenshots of the MOM console and the related information of the report on the FCS management server.
Best regards,
Susie -
Site Code for SCCM Clients installed from Secondary Site Server
Hello,
We have started the implementation of SCCM 2012 R2 at our network. We have setup a Primary site (JFO) server & pushed out the installation of SCCM clients to the local subnet. Things went fine.
We have installed a Secondary site (ATC) at a remote network. We have tested client installation in the installation wizard we specify to install the client from the Secondary server. When SCCM client installed from the Secondary server, the site
code that appears on the client in the control panel->Configuration Manager client settings is the site code of the primary site and not the secondary site.
Is this behavior is normalUltimately, secondary sites do *not* manage clients and so will never be assigned to the secondary site. However, do note that resources in the console that represent systems that do not have the client agent may show the site code of the secondary site
if they fall within a boundary group associated with that secondary site. This is done so that client push can be initiated from the correct site. More gory details at http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
Jason | http://blog.configmgrftw.com | @jasonsandys -
MBAM clients not report device users
Hi all,
I have installed MBAM 2.5 infrastructure with some mbam clients on laptops.
My problem is that mbam clients (ver. 2.5.0244.0) don’t report the information about device users to MBAM Recovery and Hardware DB, but one client (ver. 2.1.0117.0) does it.
Any ideas on how to fix?
Regards,
Alexcan you confirm if the group policies are flowing down to the affected machines? (regedit
HKLM\SOFTWARE\Policies\Microsoft\FVE )
older version of MBAM clients will report to the newer version of the MBAM IIS server.
Also see if URLs when posted on IE does asks for a prompt.
Mayank Sharma Support Engineer at Microsoft working in Enterprise Platform Support. -
Client machine not reporting to wsus server
My server Windows Server 2008 R2 Standard x 64 virtual machine install in Hyper-v server and Install SCE management version 2010.
in sudden server stopped sending updated to client machine. So I check many and did many changed as per MS community forums. But still I have same issue.
Then I planned to install again SCE management server in different VM. But even though I am getting error that old SCE management server is existing in my domain. Therefore I am afraid to change or remove any setting in AD since I have short
of knowledge about SCE servers.
However my SCE server was working smoothly until 11-2013 and then suddenly stuck. When I check the server machine I found that local drive C: is getting full and SCE management is fail to start. So from that to now when ever I had free time I changed
many things. But unfortunately I couldn't get the sever back to normal.
Few changes which I made are below.
- Remove and reinstall WAUS several times
- Check online update and direct updated server SCE machine without getting updated from SCE
- Remove dotnet frame work and updated version 4
- product configuration wizard reconfigure
- Repair management agent in client machine.
Kindly help for me to repair my SCE server or make another installation without having change of settings.
It would be highly appreciated if you could resolve issue
The error massage is below in windows update log.
2015-02-11 11:37:46:747 904 c78 Misc =========== Logging initialized (build: 7.6.7600.320, tz: +0300) ===========
2015-02-11 11:37:46:747 904 c78 Misc = Process: C:\Windows\system32\svchost.exe
2015-02-11 11:37:46:747 904 c78 Misc = Module: c:\windows\system32\wuaueng.dll
2015-02-11 11:37:46:747 904 c78 Service *************
2015-02-11 11:37:46:747 904 c78 Service ** START ** Service: Service startup
2015-02-11 11:37:46:747 904 c78 Service *********
2015-02-11 11:37:46:750 904 c78 Agent * WU client version 7.6.7600.320
2015-02-11 11:37:46:750 904 c78 Agent * Base directory: C:\Windows\SoftwareDistribution
2015-02-11 11:37:46:750 904 c78 Agent * Access type: No proxy
2015-02-11 11:37:46:751 904 c78 Agent * Network state: Connected
2015-02-11 11:37:58:940 904 8a0 Report CWERReporter::Init succeeded
2015-02-11 11:37:58:940 904 8a0 Agent *********** Agent: Initializing Windows Update Agent ***********
2015-02-11 11:37:58:941 904 8a0 Agent * Prerequisite roots succeeded.
2015-02-11 11:37:58:941 904 8a0 Agent *********** Agent: Initializing global settings cache ***********
2015-02-11 11:37:58:941 904 8a0 Agent * WSUS server: http://SCE-01.mubarrad.com.kw:8530
2015-02-11 11:37:58:941 904 8a0 Agent * WSUS status server: http://SCE-01.mubarrad.com.kw:8530
2015-02-11 11:37:58:941 904 8a0 Agent * Target group: (Unassigned Computers)
2015-02-11 11:37:58:941 904 8a0 Agent * Windows Update access disabled: No
2015-02-11 11:37:59:068 904 8a0 DnldMgr Download manager restoring 0 downloads
2015-02-11 11:37:59:081 904 8a0 AU ########### AU: Initializing Automatic Updates ###########
2015-02-11 11:37:59:082 904 8a0 AU # WSUS server: http://SCE-01.mubarrad.com.kw:8530
2015-02-11 11:37:59:082 904 8a0 AU # Detection frequency: 22
2015-02-11 11:37:59:082 904 8a0 AU # Approval type: Pre-install notify (Policy)
2015-02-11 11:37:59:082 904 8a0 AU # Auto-install minor updates: No (User preference)
2015-02-11 11:37:59:082 904 8a0 AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-02-11 11:37:59:082 904 8a0 AU # Will display featured software notifications (User preference)
2015-02-11 11:37:59:301 904 c78 Report *********** Report: Initializing static reporting data ***********
2015-02-11 11:37:59:301 904 c78 Report * OS Version = 6.1.7601.1.0.196880
2015-02-11 11:37:59:301 904 c78 Report * OS Product Type = 0x00000007
2015-02-11 11:37:59:313 904 c78 Report * Computer Brand = Microsoft Corporation
2015-02-11 11:37:59:313 904 c78 Report * Computer Model = Virtual Machine
2015-02-11 11:37:59:316 904 c78 Report * Bios Revision = 090004
2015-02-11 11:37:59:316 904 c78 Report * Bios Name = BIOS Date: 03/19/09 22:51:32 Ver: 09.00.04
2015-02-11 11:37:59:316 904 c78 Report * Bios Release Date = 2009-03-19T00:00:00
2015-02-11 11:37:59:316 904 c78 Report * Locale ID = 1033
2015-02-11 11:37:59:352 904 8a0 AU Successfully wrote event for AU health state:0
2015-02-11 11:37:59:352 904 8a0 AU Initializing featured updates
2015-02-11 11:37:59:352 904 8a0 AU Found 0 cached featured updates
2015-02-11 11:37:59:352 904 8a0 AU Successfully wrote event for AU health state:0
2015-02-11 11:37:59:353 904 8a0 AU Successfully wrote event for AU health state:0
2015-02-11 11:37:59:354 904 8a0 AU AU finished delayed initialization
2015-02-11 11:37:59:354 904 c78 AU #############
2015-02-11 11:37:59:354 904 c78 AU ## START ## AU: Search for updates
2015-02-11 11:37:59:354 904 c78 AU #########
2015-02-11 11:37:59:356 904 c78 AU <<## SUBMITTED ## AU: Search for updates [CallId = {A05977D0-8D58-4DC1-AAC5-C5FD68987D7F}]
2015-02-11 11:38:01:818 904 8a0 AU Triggering AU detection through DetectNow API
2015-02-11 11:38:01:818 904 8a0 AU Will do the detection after current detection completes
2015-02-11 11:38:03:808 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:03:808 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:03:808 904 1de0 Misc FATAL: SOAP/WinHttp - SendRequest: SendRequestUsingProxy failed. error 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT + Last proxy send request failed with hr = 0x80072EFD, HTTP status code = 0
2015-02-11 11:38:03:808 904 1de0 PT + Caller provided credentials = No
2015-02-11 11:38:03:808 904 1de0 PT + Impersonate flags = 0
2015-02-11 11:38:03:808 904 1de0 PT + Possible authorization schemes used =
2015-02-11 11:38:03:808 904 1de0 PT WARNING: GetConfig failure, error = 0x80072EFD, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-11 11:38:03:808 904 1de0 PT WARNING: PTError: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT WARNING: GetConfig_WithRecovery failed: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT WARNING: RefreshConfig failed: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT WARNING: RefreshPTState failed: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT WARNING: PTError: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 Report WARNING: Reporter failed to upload events with hr = 80072efd.
2015-02-11 11:38:08:092 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:08:092 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:08:092 904 1de0 Misc FATAL: SOAP/WinHttp - SendRequest: SendRequestUsingProxy failed. error 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT + Last proxy send request failed with hr = 0x80072EFD, HTTP status code = 0
2015-02-11 11:38:08:092 904 1de0 PT + Caller provided credentials = No
2015-02-11 11:38:08:092 904 1de0 PT + Impersonate flags = 0
2015-02-11 11:38:08:092 904 1de0 PT + Possible authorization schemes used =
2015-02-11 11:38:08:092 904 1de0 PT WARNING: GetConfig failure, error = 0x80072EFD, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-11 11:38:08:092 904 1de0 PT WARNING: PTError: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT WARNING: GetConfig_WithRecovery failed: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT WARNING: RefreshConfig failed: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT WARNING: RefreshPTState failed: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT WARNING: PTError: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 Report WARNING: Reporter failed to upload events with hr = 80072efd.
2015-02-11 11:38:08:093 904 1de0 Report REPORT EVENT: {62417852-380A-47BC-B153-8A8E0E198470} 2015-02-11 11:37:59:352+0300 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
2015-02-11 11:38:08:098 904 1de0 Report CWERReporter finishing event handling. (00000000)
2015-02-11 11:38:08:098 904 1de0 Agent *************
2015-02-11 11:38:08:098 904 1de0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-11 11:38:08:098 904 1de0 Agent *********
2015-02-11 11:38:08:098 904 1de0 Agent * Online = No; Ignore download priority = No
2015-02-11 11:38:08:098 904 1de0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-02-11 11:38:08:098 904 1de0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-02-11 11:38:08:098 904 1de0 Agent * Search Scope = {Machine}
2015-02-11 11:38:08:440 904 1de0 Agent * Found 0 updates and 0 categories in search; evaluated appl. rules of 0 out of 0 deployed entities
2015-02-11 11:38:08:441 904 1de0 Agent *********
2015-02-11 11:38:08:441 904 1de0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-11 11:38:08:441 904 1de0 Agent *************
2015-02-11 11:38:08:441 904 edc AU >>## RESUMED ## AU: Search for updates [CallId = {A05977D0-8D58-4DC1-AAC5-C5FD68987D7F}]
2015-02-11 11:38:08:441 904 edc AU # 0 updates detected
2015-02-11 11:38:08:441 904 edc AU #########
2015-02-11 11:38:08:441 904 edc AU ## END ## AU: Search for updates [CallId = {A05977D0-8D58-4DC1-AAC5-C5FD68987D7F}]
2015-02-11 11:38:08:441 904 edc AU #############
2015-02-11 11:38:08:441 904 edc AU Featured notifications is disabled.
2015-02-11 11:38:08:442 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:08:442 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:08:442 904 c78 AU #############
2015-02-11 11:38:08:442 904 c78 AU ## START ## AU: Search for updates
2015-02-11 11:38:08:442 904 c78 AU #########
2015-02-11 11:38:08:444 904 c78 AU <<## SUBMITTED ## AU: Search for updates [CallId = {B8E1001D-5C48-4A26-888D-99FECCD6F9F1}]
2015-02-11 11:38:08:444 904 1de0 Agent *************
2015-02-11 11:38:08:444 904 1de0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-11 11:38:08:444 904 1de0 Agent *********
2015-02-11 11:38:08:444 904 1de0 Agent * Online = Yes; Ignore download priority = No
2015-02-11 11:38:08:444 904 1de0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-02-11 11:38:08:444 904 1de0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-02-11 11:38:08:444 904 1de0 Agent * Search Scope = {Machine}
2015-02-11 11:38:08:444 904 1de0 Setup Checking for agent SelfUpdate
2015-02-11 11:38:08:445 904 1de0 Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: DownloadFileInternal failed for http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab: error 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Setup FATAL: DownloadCab failed, err = 0x80072EFD
2015-02-11 11:38:25:564 904 1de0 Setup WARNING: SelfUpdate check failed to download package information, error = 0x80072EFD
2015-02-11 11:38:25:564 904 1de0 Setup FATAL: SelfUpdate check failed, err = 0x80072EFD
2015-02-11 11:38:25:565 904 1de0 Agent * WARNING: Skipping scan, self-update check returned 0x80072EFD
2015-02-11 11:38:25:565 904 1de0 Agent * WARNING: Exit code = 0x80072EFD
2015-02-11 11:38:25:565 904 1de0 Agent *********
2015-02-11 11:38:25:565 904 1de0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-11 11:38:25:565 904 1de0 Agent *************
2015-02-11 11:38:25:565 904 1de0 Agent WARNING: WU client failed Searching for update with error 0x80072efd
2015-02-11 11:38:25:565 904 1de0 Report CWERReporter finishing event handling. (00000000)
2015-02-11 11:38:25:565 904 edc AU >>## RESUMED ## AU: Search for updates [CallId = {B8E1001D-5C48-4A26-888D-99FECCD6F9F1}]
2015-02-11 11:38:25:566 904 edc AU # WARNING: Search callback failed, result = 0x80072EFD
2015-02-11 11:38:25:566 904 edc AU # WARNING: Failed to find updates with error code 80072EFD
2015-02-11 11:38:25:566 904 edc AU #########
2015-02-11 11:38:25:566 904 edc AU ## END ## AU: Search for updates [CallId = {B8E1001D-5C48-4A26-888D-99FECCD6F9F1}]
2015-02-11 11:38:25:566 904 edc AU #############
2015-02-11 11:38:25:566 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:25:566 904 edc AU AU setting next detection timeout to 2015-02-11 13:38:25
2015-02-11 11:38:25:566 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:25:567 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:30:595 904 1de0 Report REPORT EVENT: {6470B8FE-1600-4F7B-807F-6031606ECC8B} 2015-02-11 11:38:25:564+0300 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 80072efd SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80072efd.
2015-02-11 11:38:30:613 904 1de0 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-02-11 11:38:30:613 904 1de0 Report WER Report sent: 7.6.7600.320 0x80072efd D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2015-02-11 11:38:30:613 904 1de0 Report CWERReporter finishing event handling. (00000000)Can you try the below to reset the authorization and force a connection back from one of the win 7 machines:
it should help pinpoint exact issues.
1. Record the system time.
2. Reboot the system (or restart the Windows Update service).
3. After reboot run the command wuauclt
/resetauthorization /detectnow.
4. Wait 30 minutes.
5. Post the entries from the WindowsUpdate.log starting at the time recorded in Step #1.
Do you have any Windows 7 machines that are reporting? Are other machines with different operating systems reporting correctly? -
Client not passing data to server
ok so this time i'm up for a server/client basic connection. I get the codes to compile; however, when i run the server then the client (using 2 different cmd prompts) i get the inputdialog but it hangs from there and does nothing. Its something in the buffer but not sure what.
client:
import javax.swing.JOptionPane;
import java.io.*;
import java.net.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class PalindromeIgnoreNonAlphanumeric {
/** Main method */
public static void main(String[] args) {
try{
Socket socket = new Socket("localhost", 8000);
DataInputStream in = new DataInputStream(socket.getInputStream());
DataOutputStream out = new DataOutputStream(socket.getOutputStream());
// Prompt the user to enter a string
String s = JOptionPane.showInputDialog("Enter a string:");
out.writeChars(s);
out.flush();
boolean fromserver = in.readBoolean();
JOptionPane.showMessageDialog(null, "Your input" + s + "was sent to the server, and the server replied. Is it a palindrome? " + fromserver);
catch(IOException ex){
System.err.print(ex);
finally{
System.out.print("Connection to server closed");
}server:
import java.io.*;
import java.net.*;
import java.util.*;
import java.awt.*;
import javax.swing.*;
import java.io.InputStream.*;
public class PalindromeServer
public static void main(String[] args)
try{
/*set the port and tell the server to start accepting sockets*/
ServerSocket server = new ServerSocket(8000);
Socket socket = server.accept();
/* set the In and outputs */
BufferedReader input = new BufferedReader(new InputStreamReader(socket.getInputStream()));
DataOutputStream output = new DataOutputStream(socket.getOutputStream());
/*Read in the data from the client*/
String s = input.readLine();
output.writeBoolean(isPalindrome(s));
catch(IOException ex){
System.err.print(ex);
/** Return true if a string is a palindrome */
public static boolean isPalindrome(String s)
// Create a new string by eliminating non-alphanumeric chars
String s1 = filter(s);
// Create a new string that is the reversal of s1
String s2 = reverse(s1);
// Compare if the reversal is the same as the original string
return s2.equals(s1);
/** Create a new string by eliminating non-alphanumeric chars */
public static String filter(String s)
// Create a string buffer
StringBuilder strBuf = new StringBuilder();
// Examine each char in the string to skip alphanumeric char
for (int i = 0; i < s.length(); i++)
if (Character.isLetterOrDigit(s.charAt(i)))
strBuf.append(s.charAt(i));
// Return a new filtered string
return strBuf.toString();
/** Create a new string by reversing a specified string */
public static String reverse(String s)
StringBuilder strBuf = new StringBuilder(s);
strBuf.reverse(); // Use the reverse method for StringBuilder object
return strBuf.toString();
}On the client side you send characters. No line break.
Meanwhile the server code is blocking waiting for a line break.
and do look into closing some resources. -
Instant Client not working on Windows Server 2003
Hi everybody,
I have installed the Instant Client libraries on a machine running Windows Server 2003 in order to connect to a remote Oracle server. I also installed the sqlplus package. I copied them in a local directory, updated the Environment variable PATH and restarted. When I try to execute sqlplus to test if everything works fine, I get the following errors:
sqlplus user/[email protected]:1521/orcl
SP2-1503: Unable to initialize Oracle call interface
SP2-0152: ORACLE may not be functioning properly
Also, when I try to use PHP OCI8 functions like oci_connect() I get an error like:
PHP Warning: oci_connect() [function.oci-connect]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that PATH includes the directory with Oracle Instant Client libraries
I checked it and the PATH variable points to the instant client libraries.
Any ideas?
Thanks in advance!I get the following errors: sqlplus user/[email protected]:1521/orcl SP2-1503: Unable to initialize Oracle call interface SP2-0152: ORACLE may not be functioning properly Also, when I try to use PHP OCI8 functions like oci_connect......Like the error suggested, the instant client libraries does not include the Network Service required by SQLPLUS.
The connect string you are trying to use doesn't work for SQLPLUS. SQLPLUS will need proper TNS names configured.
In another words, instanct client libraries installation is not enough to use sqlplus. Use Runtime installation or Customized installation. -
Server 2012 R2 DHCP Failover - Hot Standby clients not renewing with standby server
In my test network I have a pair of Server 2012 R2 DHCP servers setup for Hot Standby and they will successfully service a client request for a new request.
What I am seeing is that when I test failover the clients will not renew with the Standby server. I have to release first and then renew.
When both DHCP servers are up the state is normal and replication of configuration from the Active to Standby is working. As far as I can tell it is configured correctly.
MaxClientLeadTime is 10 minutes.
StateSwitchInterval is 10 minutes.
AutoStateTransition is set to True.
Adding that manual renews fail with a message stating that it was unable to contact the dhcp server. However if I wait for the lease to expire/auto-renew the dhcp server does indeed change to the standby. Once the primary server comes back up and the state
returns to normal I am able to manually renew.
thanks in advance
Hi,
For test, we let the active DHCP down and the standby DHCP server will take place. But when we renew an IP, client send unicast to the former DHCP
server. That’s why the first request failed.
At 7/8 of the scope lease time, the client moves into a REBINDING state and broadcasts a lease renewal request.
For more information please refer to:
DHCP Failover Examples
http://technet.microsoft.com/en-us/library/dn338973.aspx
Hope this helps. -
WSUS Windows 7 Client not connecting with WSUS SERVER 2012 R2 Error " 80072ee2"
Hi ,
I Have the Non- AD WSUS server 2012 R2 as WSUS server, and widnows 7 ent sp1 as WSUS Client , the server and client are in teh same ip range and able to ping both server from client and client from server, and both are in teh
same time zone(EST), But im getting the "80072ee2" when ever i tried to get the updates from client
Please help me on this
Thanks
Balaji KRecord the system time of the Windows 7 client.
Reboot the Windows 7 client.
Run this command from a command prompt: wuauclt /resetauthorization /detectnow.
Wait =30= minutes.
Post the entries from the WindowsUpdate.log starting at the time recorded in Step #1.
I have noted the time at 12:06 am and reboot the machine. and at 12:27 i have Run this command from a
command prompt: wuauclt /resetauthorization /detectnow. and taken the the logs from 11 am to 1 pm
2015-02-03 12:15:26:002
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:15:26:002
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:15:26:002
956 f84
PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2015-02-03 12:15:26:002
956 f84
PT + Caller provided credentials = No
2015-02-03 12:15:26:002
956 f84
PT + Impersonate flags = 0
2015-02-03 12:15:26:002
956 f84
PT + Possible authorization schemes used =
2015-02-03 12:15:26:002
956 f84
PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-03 12:15:26:002
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
PT WARNING: RefreshConfig failed: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
PT WARNING: RefreshPTState failed: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
Report WARNING: Reporter failed to upload events with hr = 80072ee2.
2015-02-03 12:27:05:651
956 ca8
AU Triggering AU detection through DetectNow API
2015-02-03 12:27:05:651
956 ca8
AU Triggering Online detection (non-interactive)
2015-02-03 12:27:05:652
956 930
AU #############
2015-02-03 12:27:05:652
956 930
AU ## START ## AU: Search for updates
2015-02-03 12:27:05:652
956 930
AU #########
2015-02-03 12:27:05:654
956 930
AU <<## SUBMITTED ## AU: Search for updates [CallId = {710EE50A-0397-4DC8-B33B-B97410B73C00}]
2015-02-03 12:27:05:654
956 f84
Agent *************
2015-02-03 12:27:05:654
956 f84
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-03 12:27:05:654
956 f84
Agent *********
2015-02-03 12:27:05:654
956 f84
Agent * Online = Yes; Ignore download priority = No
2015-02-03 12:27:05:654
956 f84
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-02-03 12:27:05:654
956 f84
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-02-03 12:27:05:654
956 f84
Agent * Search Scope = {Machine}
2015-02-03 12:27:05:678
956 f84
Setup Checking for agent SelfUpdate
2015-02-03 12:27:05:678
956 f84
Setup Client version: Core: 7.5.7601.17514 Aux: 7.5.7601.17514
2015-02-03 12:27:29:233
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:27:29:233
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:27:29:233
956 f84
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
2015-02-03 12:27:29:234
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2015-02-03 12:27:29:234
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2015-02-03 12:27:29:234
956 f84
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2015-02-03 12:27:52:795
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:27:52:795
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:27:52:795
956 f84
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
2015-02-03 12:27:52:796
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2015-02-03 12:27:52:796
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2015-02-03 12:27:52:796
956 f84
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2015-02-03 12:28:16:363
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:28:16:363
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:28:16:364
956 f84
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
2015-02-03 12:28:16:364
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2015-02-03 12:28:16:364
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2015-02-03 12:28:16:364
956 f84
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2015-02-03 12:28:39:920
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:28:39:920
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:28:39:920
956 f84
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Misc WARNING: DownloadFileInternal failed for http://135.155.61.172:8530/selfupdate/wuident.cab: error 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Setup WARNING: SelfUpdate check failed to download package information, error = 0x80072EE2
2015-02-03 12:28:39:921
956 f84
Setup FATAL: SelfUpdate check failed, err = 0x80072EE2
2015-02-03 12:28:39:922
956 f84
Agent * WARNING: Skipping scan, self-update check returned 0x80072EE2
2015-02-03 12:28:39:923
956 f84
Agent * WARNING: Exit code = 0x80072EE2
2015-02-03 12:28:39:923
956 f84
Agent *********
2015-02-03 12:28:39:923
956 f84
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-03 12:28:39:923
956 f84
Agent *************
2015-02-03 12:28:39:923
956 f84
Agent WARNING: WU client failed Searching for update with error 0x80072ee2
2015-02-03 12:28:39:924
956 fec
AU >>## RESUMED ## AU: Search for updates [CallId = {710EE50A-0397-4DC8-B33B-B97410B73C00}]
2015-02-03 12:28:39:924
956 fec
AU # WARNING: Search callback failed, result = 0x80072EE2
2015-02-03 12:28:39:924
956 fec
AU # WARNING: Failed to find updates with error code 80072EE2
2015-02-03 12:28:39:924
956 fec
AU #########
2015-02-03 12:28:39:924
956 fec
AU ## END ## AU: Search for updates [CallId = {710EE50A-0397-4DC8-B33B-B97410B73C00}]
2015-02-03 12:28:39:924
956 fec
AU #############
2015-02-03 12:28:39:925
956 fec
AU Successfully wrote event for AU health state:0
2015-02-03 12:28:39:925
956 fec
AU AU setting next detection timeout to 2015-02-03 21:23:35
2015-02-03 12:28:39:926
956 fec
AU Successfully wrote event for AU health state:0
2015-02-03 12:28:39:928
956 fec
AU Successfully wrote event for AU health state:0
2015-02-03 12:29:03:495
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:29:03:495
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:29:03:496
956 f84
PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2015-02-03 12:29:03:496
956 f84
PT + Caller provided credentials = No
2015-02-03 12:29:03:496
956 f84
PT + Impersonate flags = 0
2015-02-03 12:29:03:496
956 f84
PT + Possible authorization schemes used =
2015-02-03 12:29:03:496
956 f84
PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-03 12:29:03:496
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
PT WARNING: RefreshConfig failed: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
PT WARNING: RefreshPTState failed: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
Report WARNING: Reporter failed to upload events with hr = 80072ee2.
2015-02-03 12:29:03:496
956 f84
Report REPORT EVENT: {B6636CDB-B0BF-4CDE-BEB3-D49C1CEC258F}
2015-02-03 12:28:39:921-0800 1
148 101
{D67661EB-2423-451D-BF5D-13199E37DF28}
1 80072ee2
SelfUpdate Failure
Software Synchronization Windows Update Client failed to detect with error 0x80072ee2.
2015-02-03 12:29:03:510
956 f84
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-02-03 12:29:03:510
956 f84
Report WER Report sent: 7.5.7601.17514 0x80072ee2 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2015-02-03 12:29:03:510
956 f84
Report CWERReporter finishing event handling. (00000000)
2015-02-03 12:29:27:075
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:29:27:075
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:29:27:075
956 f84
PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2015-02-03 12:29:27:075
956 f84
PT + Caller provided credentials = No
2015-02-03 12:29:27:075
956 f84
PT + Impersonate flags = 0
2015-02-03 12:29:27:075
956 f84
PT + Possible authorization schemes used =
2015-02-03 12:29:27:075
956 f84
PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-03 12:29:27:075
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
PT WARNING: RefreshConfig failed: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
PT WARNING: RefreshPTState failed: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
Report WARNING: Reporter failed to upload events with hr = 80072ee2.
2015-02-03 12:53:05:793
956 930
AU AU received policy change subscription event
2015-02-03 12:58:26:707
956 8fc
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:58:26:707
956 8fc
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:58:26:708
956 8fc
PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2015-02-03 12:58:26:708
956 8fc
PT + Caller provided credentials = No
2015-02-03 12:58:26:708
956 8fc
PT + Impersonate flags = 0
2015-02-03 12:58:26:708
956 8fc
PT + Possible authorization schemes used =
2015-02-03 12:58:26:708
956 8fc
PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-03 12:58:26:708
956 8fc
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
PT WARNING: RefreshConfig failed: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
PT WARNING: RefreshPTState failed: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
Report WARNING: Reporter failed to upload events with hr = 80072ee2. -
Just similar to setup the Local/Group policy 'Don't remember last login information'
Please advise
Thanks in advance ...Hi,
The default server and the server lists are written by design in Windows, which is located in registry at:
HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default
You can delete them manually but this effect won’t persist after next remote desktop logon. The key will be recreated and save your choices of remote servers. Therefore, I’m afraid there is no policy or method to disable this feature. A possible workaround
is to save an empty .RDP file and deploy it to all the client sides, then let all the users use this one in order to avoid remote server being saved.
For more information on this behavior, please refer to:
How to Remove Entries from the Remote Desktop Connection Computer Box
http://support.microsoft.com/kb/312169
Remote Desktops always remembers “last server accessed”
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/e608a423-ccfa-4207-b5d0-ff9605337f6c/
Regards,
Miya
Miya Yao
TechNet Community Support
Maybe you are looking for
-
How do I count parts with a fiber optic sensor using the NI-1772 and VBAI 2011?
I'm inspecting parts using the NI-1772. Just after the camera, bad parts are ejected when they pass by a fiberoptic sensor. I want to use another sensor after that to verify the number of good parts, so that I can be sure the bad parts have been ej
-
Will this tiger woods pga '12 work on lion ??
heres the link!! Thanks!! http://www.amazon.com/Tiger-Woods-PGA-TOUR-12/dp/B005IRLHBG/ref=sr_1_12?ie=UTF8& qid=1316123742&sr=8-12
-
RS480M2-IL: Drives do not power up if PATA cables are connected
I am building a system around a the RS480M2-IL and I'm having a bizzare problem. When I plug the hard drive and DVD into the power supply and turn the system on without connecting the ATA133 connectors, the drives power up. If I connect the drives
-
I've got a requirement to make an APEX report look as close as possible to an HTML based report generated by one of our other products. The existing report uses <THEAD> and <TFOOT> tags on a table to set a style for the Column headings and the Final
-
Crash straight after project loads
i have a project i'm working on that all of a sudden is crashing 5 seconds after it successfully loads up. i've tried some troubleshooting like deleting the last few audio files i've added, and disabling core audio and loading the project up (loads f