Closing Issue of P&L a/cs

Hi,
I'm using SAP B1 2007 B PL:07 from the last financial year(2008-09).
But, after last year closing ,the system still showing the closing balances of
P&L Accounts(i.e.- Sales & Expenditure a/cs) as on 01/04/09.
Whereas, only balance sheet a/c balances should come.
Can anyone tell me the solution.
Rgds
Subrata

Hi,
Make sure that you have chosen all periods to process 'Period End Closing'.
Also make sure to use that the following criteria is used in the Trial Balance Report;
- Disp Opening Balance for Period
- OB from start of company Activity.
- Trial Balance
I think you are using 'OB Start of Fiscal year' instead of 'OB start of Company Activity'.
'OB start of fiscal year' is only relevant in case you are not running the TB with a start date that is not the first date of the fiscal year. This selection criteria will give you the transaction fro m the start of the fiscal year to the start date of the report date.
NB:If there are balances on all P&L accounts in the new fiscal year,that amount would not be carried over.
Hope this will clarify your issue !

Similar Messages

CS4 closing issues

I have read a few topics on this however there has never been any form of real answer.
I have been looking at using Photoshop CS4 and downloaded the trail. All was going well and I liked it, then it starting closing itself down for no reason at all. No warning messages, nothing. I deleted the preference file and I managed to work with it for over an hour wihout problems. Closed it in the usual way and continued with someother work. Then I started PS again and the closing issue returned - so back to deleting the preference file and restart the app. This time the problem did no go away, so I am stuck with this closing issue.
I really want to buy CS4 so would welcome and suggestions. I am running XP SP3, 1.1Ghz with 1.5GB RAM. When it works it works well and fast too!
Cheers
Andrew

The minimum system requirements states at least a 1.8GHz processor. And that's likely problematic, or at least slow.

Asset period end closing issue

Hello Experts,
I am facing an issue in year closing for 2009. The error says that Asset balance sheet values not completely posted. This is in Area 11 where APC values are not completely posted. This depreciation area is set up in 2009 only with post to general ledger indicator 2 (Area Posts APC and Depreciation on Periodic Basis) in OADX.
The error message takes me to start APC posting program(ASKB). When I execute this I get an error that "Account 'Acquisition:Acquis. and production costs' could not be found for area 11"
My question is if I give an account for this for area 11, what will be the accounting entry. What will be the offsetting account?
What other alternatives I have?
Many thanks in advance.
Sangram

Hi
You need to maintain the APC Account for Dep Area 11 inorder for ASKB to go through....
You can use the same account maintained in Dep Area 01....
The posting generated in ASKB is as explained above... i..e One leg of the entry goes to Contra Account and another goes to APC account or Profit/Loss on sale of asset, as the case may be
br, Ajay M

Asset year end closing issue

Hi, I run ajab to close year 2010 (not 2011)and encounter below issue:
Asset 004110000555-0000 in company code 0000 (depreciation incomplete)
Message no. AU070
Diagnosis
The planned depreciation was not completely posted to Financial Accounting for asset 004110000555-0000 in company code IN00 in depreciation area 90.
System Response
Year-end closing cannot be carried out for company code IN00.
Procedure
Post the depreciaton using the appropriate posting program (Periodic processing) in Financial Accounting. Then start a repeat run for this asset, if necessary
My depreciation area 90 is "Post assets periodically in General Ledger", what should I do?

Hi
Is depreciation fully posted for the year 2010. Try to run AFAB in repeat mode for the last period of 2010 in test run to see if any values are coming for posting.
If depreciation values exist, then same needs to be posted before you close the Asset fiscal year.
Also please note for posting the depreciation your Fiscal year and period should be open in accounting.
Regards
Malathi

Navigation for Month End Closings & Some inputs on Monthly closing issues

Hi Experts
Some inputs on Month End Closing and
what type of issues will be come accross during the closing( Mention any ).
Navigation for the Month End Closings

In the case of Inventory: Monthly Accounting Period closure, you need to ensure that there are no unprocessed shipping transactions, uncosted material transactions, pending WIP costing transactionsm etc.. The number of these kinds of transactions should be Zero. For example, if there are any unprocessed shipping transactions which might be stuck/errored out during Interface Trip Stop program run, then you can NOT close the period for that month until you clear these transactions. Check the metalink note, 262979.1 for the same.
Navigation is Inventory > Accounting Close Cycle > Inventory Accounting Periods. Click on the Pending button to see the pending transactions. If there are NO requried resolutions to be done, you can close the INV period for that month.
Regards,
Hemanth

Cfquery tag closing issues

This one has been plauging me for a long time and it's rather annoying. In Preferences / Code Hints, I have closing tags set for "</". This works fine for every tag except for cfquery. There are a couple other people I work with who have the same issue but at the same time there are plenty of people who do not have this issue at all. I've gone as far as uninstalling Dreamweaver entirely (including deleting all of my preferences) and reinstalling it after a reboot. Nothing seems to work. Any ideas on how I can fix this?
Note: Setting it to close after typing the opening tag doesn't work either; for cfquery. All other tags work just fine. o_O

I think I've found the culprit... CF9 Extensions for Dreamweaver! I uninstalled everything related to Adobe from my system making sure to select "Remove Preferences" as well. Then I ran ccleaner and manually searched through my registry for anything related to Adobe and deleted it. Rebooted and reinstalled CS5. The cfquery tag (auto close) was finally working! So I then proceeded to install the updates and the HTML5 and CF9 extensions. All of a sudden cfquery stopped working again. So I removed the CF9 extension, tested again, and presto! cfquery worked.
So there's got to be something in the CF9 extensions killing cfquery. I don't know how to open up this extension to see what it's made of. Any ideas?
EDIT: I think I might have narrowed it down even more. I thought maybe it was the code hints xml file that the Extension itself overwrites but it's identical to the original one. Then I noticed that the Extension adds a new folder with redefined tags (Application Data/Adobe/Dreamweaver CS5/en_US/Configuration/Content/Reference/CFML). This folder does not exist without the extension and contains "cfquery.htm". I tried to rename it and reload Dreamweaver to see if that fixed the issue but it didn't. So technically I'm still looking for a solution but at least this time it's now a solution to retain the CF9 Extension and the ability for an auto closing cfquery tag haha
UPDATE: Application Data\Adobe\Dreamweaver CS5\en_US\Configuration\TagLibraries\cfml. The files cfquery.cfm and cfquery.vtm. I backed up those files and renamed them to .old and cfquery auto closes properly even with the CF9 extension enabled! Getting closer! I guess I'll have to open those up and see what's going on. They don't exist with the CF9 extension disabled so I'm not certain what to look for.
FINAL UPDATE: So it would seem that nothing needs to be changed in either of those files. Simply renaming them, loading Dreamweaver, renaming them back, and reloading Dreamweaver did the trick. CF9 extension enabled and no issues with the cfquery tag. Perhaps there's a problem with Dreamweaver initially loading those tag files or pulling from cache somewhere before the extension was installed. Either way, it works.
Message was edited by: KrakaJap

SRM PO Closing issues

Hi All,
SRM 5.0, ECS
We have couple of PO's which are deleted in SRM and we want to close out these PO's. Is there a way we can undelete these PO's in SRM and make necessary changes to close out the PO. Since its an extended classic scenario, we cannot edit the PO in R/3.( In the Debug mode we can open the PO in R/3 for editing. We do not want to take this route). Please throw some light on this issue.
Thanks
Krishna

Hi Krishna,
What do you mean by closing out?
If you deleted the items then you should be able to undelete them, but if you deleted the document at header level then you will not be able to undelete this.
If this was deleted, did the deletion not transfer to the backend?
If it didn't, it might be worth manually running update report CLEAN_REQREQ_UP and rechecking.
Hope this helps,
Kind Regards,
Matthew

Suborder closing issue affecting KPI of Main order

Dear All,
We are facing one issue support service creates one work order after inspection say HVAC malfunction after inspection Now there are two different work centers they do work so two sub orders are creating one for Mechanical & the other for Electrical.
But when we create two suborders in sap
These two people Mech ,elect they take too much time to complete the work orders so that main work order cannot be closed .
It is affecting the KPI for Main work order work center which is having duty of inspection only .
Can we make some control in the system or else any other process we can suggest
please advice
Regards
pratap

Hi,
You can close the main order even if sub-orders are still not yet completed. There is a message issued at technical completion, this can be customized as warning or error. If only a warning then completion of main order will be allowed.
Plant Maintenance and Customer Service - Maintenance and Service Processing - Maintenance and Service Orders - Message Control
Test to get the exact message number.
-Paul

Report Closing issue

Hi,
I am working with crystal report XI and asp.net.
In my application the reports are loaded in UI on the click of a button with the help of crystal report viewer.
Working scenario is
a) Select all the reports that the user wants to select by checking the Check box provided
b) and click on the button(Generate ReportButton) to display the reports.
Now the problem is with closing the report connection.
I tried closing the connection immediately after the report object is assigned to crystalreport Viewer .
Also under the button(Generate ReportButton) click but after loading all the reports.
But both the ways it is working properly.In bot case the last report is not getting displayed if i have more that 1 report else no report is getting displayed if only one report is selected.
Could any one suggest me how to close the report.
Regards,
Smitha

Hi,
Are you sure that the reportdocument object is not getting closed or disposed before displaying the last report? Would you be able to share the code? Also, the viewer control would show one report at a time depending upon the which report is loaded in reportdocument object.
Regards,
AG.

SRM PO- R/3 PO..Closing issues

Hi,
We are on SRM 5.0 and ECS Scenario
We have an issue here.
SRM PO has three line items. Replicated fine to the backened
item 1
item 2
item 3
Item 1 is fully received and invoiced.(In backend R/3).
Item 2 No goods to receive . (Tried no further confirmations expected in SRM..PO went to Error in process..So asked the user to try delete the line item. Instead he deleted the whole PO, Dont know why SRM allowed deletion,beacuse there were few line items already received and invoiced.Have to look in to OSS notes regarding the same. Please let me know if there are any for the same.)
Item 3 was fully received and invoiced. (In backend R/3)
There was a deletion indicator next to it. Wondering if this flew in from SRM.
This was showing up in r/3 much before we tried deleting it.
I know there are so many things going in one issue.
At this time we have SRM PO which is deleted. with 0 USD . For which backend PO has 3 line items in which one shows deletion indicator. One is fully received and the other one has no goods to be recieved.
Our user has deleted the whole Po instead of the line item in which no goods are to be recieved. Is there a way to move in changes to the backend PO.
I know for a fact that backend PO can be made editable through some status changes in debugger mode. But we are looking for a functional process to achieve the same.
Thanks in advance
Krishna

1) The PO data can be extracted from SRM or R/3 . But the advantage of extracting data from R/3 is that you have lot many other data while compared to SRM system . In case u are having SRM and Sap R/3 or ECC as your backend system , it is always better to extract PO data from R/3 or ECC. In case your backend system is going to be other than SAP system , probably we can think of extracting data from SRM.
2) GR and invoice data always have to be pulled from R/3 system
3) Shopping cat details exist only in SRM and the details has to be extracted only from SRM .
Suggest to extract 1) shopping cart from SRM 2) PO,GR and Invoice from SAP R/3 or ECC.
Hope above clarifies your questions
Regards
Mani
Message was edited by:
Manikanda Ilango S.
Message was edited by:
Manikanda Ilango S.

Mail closing issue

Mail takes a very long time to close. Does anyone know what is the reason why and how to ricover the issue?

Re-do the process, there is a ~/Library/Preferences/com.apple.mail.plist file, you need to be careful looking.

U410 turning on when lid closed issue

Hi,
I've had an issue with my U410 recently, it has happened 3 or 4 times. Basically I hit the power button to put the machine asleep, put it in its sleeve and into my backpack. A few hours later when I take it out it feels warm and when I open the lid it appears that the machine has been turned itself back on and usually the battery is fairly depleted.
Has anyone else had this issue?
Thanks.

Hi finnianmc,
Thanks for posting and welcome to the commmunity,
In regards to your issue, Ishaan suggest is a very good point and idea to consider as those the the main features that controls the sleep fuctions. However befor doing any update, I would strongly suggest checking the Windows Power Options. Please see below for the detailed istructions.
Go to Control Panel and click on "Power Options". A new window should appear. ( see illustration below)
Click on "Change plan settings". Another window should appear. ( see illustration below)
Click on "Change Advance setting Power settings".
Click on "Allow wake timers" and ensure that the "On Battery" and "Plugged in" are set to disable.
Hope this helps.
Regards

Internal Order Closing Issue

Hi,
While closing IO 300000, I am getting the following error messages..........
There is still a purchase order commitment for ORD 300000
There are still open down payments for ORD 300000
There are still open down payments for ORD 300000
Message no. KO020
Diagnosis
There are still open down payments or down payment requests for order ORD 300000.
System Response
Order ORD 300000 cannot be deleted.
Procedure
You must first clear all open down payments or down payment requests for order ORD 300000.
You can then delete the order.
Kindly assist...

Hi,
Please, refer to note 599689.
Regards,
Eli

[URGENT] Business Account Closing Issue

I am the owner of a company which uses PAID skype accounts for business purpose. I recebtly received an e-mail from skype that tells me these accpunt are going to be closed (deleted) in 24 hours. Please contact me urgently.
Personally identifiable information redacted for privacy.

Hi, bodyinoita, and welcome to the Community,
Please contact Skype Customer Service to resolve this. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
Here are a few extra notes to guide you along the way ...
You will need to proceed through each step, one at a time. Sign on to the Skype website as requested. Choose the subject and topic which most closely matches the item you need assistance with. Then, continue past Step 2 of the instruction where several articles from the FAQ library will appear for you to review, and proceed to Step 3, Continue Support Request (the blue "button" appears at the lower right corner of the website page). You may also skip through Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started. When you complete the web-form and click Submit, your information is relayed to Skype and you will receive a reply via e-mail unless you are transferred to start an instant message chat session with a Customer Service agent.
If you experience difficulty reaching Skype Customer Service, try again using a different web browser. Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also impede reaching an agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

CKMLCP - Post closing issue

Hello Experts,
CKMLCP has been run and in Post closing step, we received errors that some of the materials have been locked by certain users (Processing completed with errors).This run took about 2 hours to complete.
After that we rerun the Post closing step and the Post closing was successfully completed without errors.This run was completed in 30 mins.
During the first run of the Post closing, we found out that the Revaluate consumption and CO account assignment was not ticked.
But, in the second costing run both the parameters were ticked (Revaluate consumption and CO account assignment)
My queries are whether in the first Post closing documents are posted or no documents posted as the posting was completed with errors?
If some documents have been posted then do I need to reverse that post closing run as I had not selected the Revaluate consumption and CO account assignment parameter?
Or if no documents are posted in the first post closing run, whether all documents are correctly posted in the second post closing run (as both the parameters i,e Revaluate consumption and CO account assignment) have been selected.
Thanks in advance for the help.
Regards,
WNR

Hi,
Thanks for the response.
The problem is that, for this material, the costing run shows now the correct valuation category ZE11 in the costing run result (but in pending status for the material), but the log shows the error message refering the old valuation category ZE09.
The obyc must not to be mantained because, for the valuation category ZE09, only operation PRY should be possible (this has the correct account determination), not operation PRV. The error refers old valuation category ZE09, operation PRV.
Thanks!

Closing Issue of P&L a/cs

Similar Messages

Maybe you are looking for