COHV not get correct production order

Hi
    I get a odd case...
    CO40 convert the planned order into production order and get correct user defined status profile..
    COHV convert the planned order into production order but miss the user defined status profiel...
btw,I use the same production order type in both COHV/CO40...
    It seems there is a bug in COHV..Do you have any suggestion?thanks..
COHV:
Function   Convert planned order
Execute Function Execute function in the backgournd /Execute function immediately
Order type:PP01(the same as the one in CO40.PP01 has a user defined status profile)
Collective Order:Convert entire collective order

Hi,
Any one know how to configure COHV for Planned order conversion and confirmation for backflush ?thanks
hi,i finally get the solution..thanks everyone...OPJ2..
Edited by: Monst Yang on Oct 30, 2011 11:21 PM

Similar Messages

Phantom Assembly not exploding in production order

Hi All,
We are using phantom assembly as a BOM component.
When we create a planed order from MD03 or MD02 and try to convert this planed order to production order the components of Phantom assembly are not explode in production order. When I tried with read PP master data option it get explode.
Can you please let me know the reason?
Thanks,
SAP PQ

Dear ,
Couple of points on this issue which may help you understand the problem : Bom Explosion With Phantom Assemblies will happen based on the following set up .
1. You need to maintain the special procurement key-50 for the phantom Assembly
in the MRP 2 View of the material master
2. We can override the Phantom Assembly Setting by defining in SPRO --->
Define Explosion Types so that MRP Creates Procurement Propasals for the
Phantom Assembly itself.ie We can Swith off the Phantom Assembly Settings.
This settting need to be defined in the BOM Item details screen in the Basic
Data Tab Page under MRP Area.
So check in your Bom whether switch off phantom assembly is defined.Make the Explosion Type-Blank
3.Run MRP Single Item - Multi level - Transaction MD02 with Planning Mode 2 : 'Re-explode BOM and Routing'. The Phantom Item will now get exploded correctly in the Planned Order.
4.Check the Validity of the BOM and planning date
5.Check the MRP4 set up in FG where you have kept the BOM/Routing selection
6.Check wether dependent requirement material master -MRP4 view -MRP for Depent Requ should be blank .
Check the above points and come back
Regards
JH
Edited by: Jiaul Haque on Jun 14, 2010 2:15 PM
Edited by: Jiaul Haque on Jun 14, 2010 2:18 PM

How to get open production orders by plant wise

Hi,
How to get open production orders by plant wise.
i know from tcode COOIS, is it possible to get from this. if so what are the parameters we have to give to get open production orders by plant wise.
is there any tcode or tables available , please provide details .
regards,
Hari priya

Hi,
What is your definition of Open Production Orders?
Definetly you will get the report from COOIS for Plant wise.
Whther you want to consider all the Orders having the Status REL but not DLV?
Then there is a chance of having the Orders, still with PDLV status but GR is done for the full Qty. May be you don't want to consider the TECO status, eventhough the Order is short closed??
Better to ommit the Orders with CRTD status also..
So, based on this which status to consider and which status not to consider..
You can define the "Selection profile status" in BS42.
Use this selection profile in COOIS, so that the rsults will be accurate..
Best Regards,
Siva

Not getting correct Tax calculation - due to "Ship to party region code"

When we are making Sales order   using (UTXJ cond.)
Origin Country----
IN
Delivering Plant Region----
24
Ship To Party region----
24   (maintained in customer 1 address)
Tax Classification Customer------J
Tax Classification Material----
1
We are getting correct   Tax calculation for tax code AD (4% + 1%)
But when we are using
Origin Country----
IN
Delivering Plant Region     -
24
Ship To Party region----
06     (maintained for customer 2 address)
Tax Classification Customer------ J
Tax Classification Material----
1
We are not getting correct   Tax calculation for same tax code AD (4 %( JIN2) + 1 %( ZIN2)). Instead we are getting only 1%..

difference in tax codes used for sales purpose is just the fact that Ship to party region is different.
Ship To Party region----
24   (up)
Ship To Party region----
06    (Bihar)
For 06 it is not calculating correct values

GR for production order post to cost center and not to the production order

Hi all,
when we post the goods receipt for the finished product against the production order (mov. type 101), the order is not credited with the corresponding stock value. Instead of this, the value accounts to a cost center.
We specified this cost center in OKB9 (Default account assignment), because if not, we get an error when posting the goods receipt cause of lacking accounting object.
I can't see why the system does not credit the production order?
Any ideas?
Thanks for your time
Daniel

Hi Daniel,
This is the first time i am coming across an issue like this.
neverthless from a logical front,
1. Remove Cost center as a valid receiver in Settlement Profile.
2. Your OKB9 setting are pretty much good. No need to worry about it. Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
3. Check the Settlement rule when you have created Production Order. It should have been MAT.
4. I hope you are creating Production Order with Material (using CO01 and not CO07)
5. Make sure in OPL8, the default rule in controlling tab is PP1.
Once all these are fine, i do not see any reason why you will get your probelm.
Please check and revert back to me if the problem still persists.
Best Regards
Surya

Actual activity price not updating in production order

Hi All,
I am facing one problem, that actual price for activities are not updating in production order while plan price are updated. Earlier both plan and activity prices were getting upadated but now actual price is not updating for any material. I have tried at the same material also but it is not getting updated. Actual hours are updated in confirmation of production order but not price. If somebody could suggest the reason it will be great.

Dear Nitin,
Thanx to all for valuable input. Problem is solved.
Nice to see That your problem is solved
But Can you let the Forum Members know
where was the exact problem & how it is solved
Regards
Madhu Kumar

Can not delete a Production Order is the Sales order item is rejected?

Hello everyone,
I can not delete the production order as the Sales order line item is rejected.
Does anybody know if any configuration change is required or any work around?
Thank you,
BG

Hi,
Could you pl. explain how the production order is created?
Also did you try by choosing Function in the menu (CO02 transaction) & try to set deletion flag or Technically complete?
If so did you get any error message ?
Regards,
Senthilkumar

Scheduling parameters are not defined for production orders

Hi All,
when i convert the planned order to production order i got this massage popup coming Scheduling parameters are not defined for production orders . please let me know this .

Hi,
One of major customization steps for the order type is missing. Run OPU3 and maintain settings for the order type you are using. You may copy settings from an older type.
Regards.

Target cost and actual cost not picking in production order

Hello,
The target cost and actual cost is not updating in production order when I display it in CO03 in cost analysis.
Even though we have maintained planned price in KP26.
Please suggest how it can be populated.
Best Regards,
Tapan

Hi Tapan
For Target cost
1. Your std cost must be released before Goods Receipt
2. There must be goods receipt posted on the prod order
3. You must calculate variances in KKS1/2
For Actual Cost
1. Post Goods receipt and Goods issues
2. See if any mat movements are pending in COGI
3. Ensure that operation is confirmed in PP and no entry is lying in COFC
Regards
Ajay M

Task list not getting copied in Order

Hi All,
I have created a Maintenance plan where my call object is notification. I have scheduled the plan & i got the Notification after releasing the call.
I am getting the Task list reference in Maintenance plan tab in notification.
Now my issue is, the task list is not getting copied to order when i create order against the notification.
Kindly help me resolve the issue.
Thanks & regards,
Basavaraj

Basavaraj,
When a order is created from the worklist (IW28) of notification , the task list associated to the notification will be exploded and added as operations.
Have a look at [Sap Help|http://help.sap.com/saphelp_erp60_sp/helpdata/en/fc/f26c3c17c8c67ee10000000a11402f/frameset.htm]
for detailed steps.
Regards
Narasimhan

Goods issue document is not displaying in production order

Hi Gurus, I am having problem That when I am doing goods issue in MB1A t code the document is posting but it is not displaying in production order.but when I am doing same goods issue in MIGO the document is displaying in Production order.when I am doing same goods issue in another plant with MB1A the document is showing.so where is the problem??is there any setting with plant and T code combination??what exactly is the error??why it is not showing in particular t code in particular plant.Please guide me.
Thanks in Advance.

Hi,
Check in transaction OPL8 for the combination of plant and order type..is the below indicator are activated or not...
Thanks
Kumar

Material Cost Not Shown in Production Order if planned with MD50

Hi,
We have run MRP MD50 for a sale order item ie FERT material which has BOM Items. All the stock of the BOM items is tranfered from Unrestricted Stock to Sales order stock. FERT ITEM planned order is converted to Production Order and all the BOM items sales order stock is issued against PO & Sales order no with Movement Type 261E.
After confirmation and goods receipt stock of FERT is shown under sales order Stock of Fert Material.
We can see the cost of operations but cost of materials consumed against the Production order is not displayed in Production order Cost analysis..How material cost can be displayed????
If i create PO with out refering the sale order that is normal process i can see the cost of materials triggering in Production Order.
Can we settle the varience when we are planning against sale order???
Some one Pl help us.
John

Dear,
Check your variant which showes the cost. See the following report
KKAC - For Sales Order with Assigned Orders or
KKBC_KUN - For Sales Order or
KOB1 - Actual Costs

Componant cost not picking in production order

Hi,
Componanat cost is not picking in production order, when i m creating plan order to production order in make to order scenario.
At the same time when i m creating production order by CO01 its working.
Please let me know whats missing?
Tara

Hi,
Thanks for sharing thoughts.
Issue resolved.
(SPRO-Sales and Distribution-Basic Functions-Account Assignment/Costing-Maintain Requirements Classes For Costing/Account Assignment-execute-for req class 040-Account assignment catagory -M & Valuation-M)
Tara
Edited by: tara bhapkar on Jul 7, 2011 2:52 PM

Charged an annual subscription fee but not getting my product.

It would seem that Adobe have helped themselves to £12.70 from my bank account. When I look to see what it is for, it would seem that they have taken a renewal fee from me for Adobe PDF Export. OK, so I had this last year and it didnt work. When I go to an Adobe file and try to convert it to word it asks me to renew. I have seemingly already done this so why does it continually ask me to do it again. NOT HAPPY.

OK thank you for that. Actually just as you emailed this to me I was looking on a pdf document on my pc and I didnt actually realise I needed to be logged in to my account for it to be able to convert a pdf whilst I was using my laptop. So everytime I was asking it to convert a document to word it told me that I had to subsribe but when I am signed in, it locates my account and converts the document straight away.
Its a bit confusing and there is not much help on the adobe website, but a note on the blod might be helpful so idiots like me know that they have to be logged in for it to work!!!
Many thanks
Julie
From: Rave
To: Julie Davies
Sent: Friday, October 03, 2014 2:39 PM
Subject: Charged an annual subscription fee but not getting my product.
Charged an annual subscription fee but not getting my product.
created by Rave in Adobe ExportPDF - View the full discussion

101 movement not happening when production order got backflushed.

HI SAP Gurus,
For SKU 101 movement not happening when production order got backflushed, but 261 movement successfully happened. Please let us know any settings need to check?
Thanks and Regards,
SHARAN.

Hi Sharan,
A 101 movement for the production order takes place when
- You receive the production order via MB31
or
- Confirm the last operation which has PP03 control key
A backflush is done only for the components called by the production order & not for the header material.
Hope the above answers your query.
Regards,
Vivek

COHV not get correct production order

Similar Messages

Maybe you are looking for