Collective availability check MDVP

In version 4.7 , committed qty in MDVP is showing 0 for all the planned order
( if i go for individual planned order in MD12, i am able to see committed qty)
whereas in version 5.0 , i am able to see committed qty for each planned order.
What may be the reason??
Thanks

Hi
If you want to compare the transactions in two versions of SAP, Pl. see the corresponding settings in both versions.
Regards
YMREDDY

Similar Messages

Collective availability check stock transfer PO

Hi,
I'm looking for a transaction in order to do a collective availability check to stock transfer PO.
Is it possible? Can i have a missing parts reports with all the stock transfer PO??????
Thanks

Rakesh,
Here is how the system will behave.
Product A requires X and Y. For making A = 1000 EA, we need X = 1000 EA and Y = 1000 EA.
Stock of X = 1000 EA in unrestricted use. Stock of Y = 500 EA in unrestricted use.
Assumption:Scope of check will consider only the available on hand inventory
If we run MDVP, the committed qty for A will be 500 EA because it will consider the maximum possible qty that can be made with available stock.
In MF60, for both X and Y the reserved qty will be 500 EA. The balance 500 EA of X will not be reserved for this planned order because, it will not be of any use until you receive 500 EA additional of Y. System will have it open for other planned orders if any.
Hope this helps.
Saravana

Collective Availability Check

Experts,
I am facing an issue with collective availability check for planned orders using MDVP. When I select the firming indicator it firms even those planned orders which have components missing. I was assuming that only those Planned Orders that have 100% component availability will be confirmed, however that is not the case. Is there any config that can be changed to address this issue? i.e to force the system to only firm those Planned Orders that have 100% component availability.
Regards.
Madagex

All,
Both the T-Codes mentioned above (COMAC and CO24) are both for Production/Process Orders not for process orders.
Vineet,
The option of creating an additional profile to include the header material does not work for the Missing Parts list. But We had already created additional profiles to include the header material at the first screen, where you see a report view of the availability checks. But when you select a few orders and click on the missing parts list, it does not allow you to select the header material. This option is available in ECC 6.0, but I have been unable to find a solution to cater to this requirement in 4.6C. On the missing parts list the available pool of fields does not include the header material. If there is some way we can expand the pool of available fields then we could come close a resolution.
Thanks a lot everybody for your input, andI hope you guys can help me find a solution.
Regards
Omar

Commited quantity in MDVP collective availability check..

Commited quantity and short fall qty for missingparts in MDVP report after ATP check is not getting displayed , after ATP check system is not calculating shortfall quantity and commiied quantity for missing parts, requirement quantity is shown correctly......

Hi Abhay,
Please check whetehr you have assigned correct checking rule to the plant in customizing or MRP area (OPPJ) and checking group in the material master.
The above combination must exists to carry out the availability check.
Regards
TAJUDDIN

Discrepancies in Collective Availability check.

Hello,
All components of planned order are 0% confirmed, though all components
are on stock, without reservation or confirmation.
The Checkig Rule and Groups are SAP Standard. Please let me know the reason.
Thanks in advance.

This is because a "reservation" has not yet been generated. Generate the reservation(By manually changing the field value on the component detail screen or through config to generate reservations immediately or at RELEASE) for these components and then do the availability check.
Regards
Narasimhan

MDVP - Plan order (NB type) Availability check problem

Hello GUru's,
I received one issue, the transaction MDVP does not select the plan orders for Availability check.
DUring my analysis I found that, materials have procurement type is "F". Plan orders are generated by system,
It has order type "NB" (generally our plan order type is LA - stock order).
When user check the plan orders (NB type) in the transaction code MDVP or COMAC, system shows the message
no plan order is available in the system but I checked in the MD12, plan order is available.
What could be the reason, system is showing like this message and not selecting the plan order for coll. Avl check.?
Procurement type is F and plan order type is NB this is the reason?
Kindly help me.
Thanks in advance.

Dear,
Yes collective availability check has only been implemented for in-house production only.
Order type NB with F will be for the subcontracting. Also the collective availability check (Transaction CO28, MDVM) takes no subcontract orders or subcontracting purchase requisitions into account.
If you want planned orders with special procurement subcontracting into account during the collective availability check then you need to activate the modification, set the variable MOD_SUBCON to 'X' in the include PPIOHF02 after the implementation.
For more details refer the OSS Note 198398 - Collect. availability check w/o subcontracting planned ords.
Regards,
R.Brahmankar

User exit/ badi needed for planned order create/change,collective ATP check

Dear All,
I'm looking for a user exit/ badi which can be used for planned orders at the stage of
mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
I need after collective availability check to perform the following:
1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
then
2) to start a scheduling.
Very appreciate your help.
Best Regards,
Andrey
Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PM

Dear,
Use the BAPI : BAPI_PLANNEDORDER_CHANGE
Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
and the transaction MDAC Execute action for planned order
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
Delete planned order
Assign the key for the respective action control to the materials in the material master (MRP 4 view).
Please refer this thread,
Re: MDVP for collective orders
Regards,
R.Brahmankar

Collective availabilty check

Dear PP experts,
I am facing a problem with collective availability check. My FG strategy is 52 and for below BOM components I have assigned 70 for which I want to keep in stock and 74 which I do not want to keep in stock. After creating PIR for my FG run MRP for components keep in stock.When I receive a sales order I again run MRP which consumes PIR and create planned orders for low level components (74 strategy).Now The Problem is when I do collective availability check for planned orders in MDVP even though there is a components stock it is showing missing parts. When I uncheck u2018check without RLTu2019 system is not showing the missing parts but in the other case though stock is available it is shown as missing but no planned orders are created. I have given production storage location at component level for backflush and if I remove the storage location, it is working fine. When Availability check is done at plant level why I am getting different results? I want the system should consider actual stocks at the time of availability check and should show only missing parts. I am using the pp Checking rule and unchecked PR and PO ,planned orders and production orders ,check without RLT as well
Thanks in advance
TV.KUMAR

I think from your statement that storage locations for the compoenents are defined in the BOM.
they are defaulted in to the Storage location field for confirmation or for Goods movement.
due to this, the system while doing the Avaiaiblity check only check in that storage location.
You have the Availability check at plant level, but due to the asignment of Storage location , it is done only at Storage location level.
Regards
Ratan

User Exit/BADI for Production Order Availability Check

Hi PP experts,
Is there any user exit or BADI which can be used for Production Order Availability Check during order creation/release or while running collective availability check (COMAC) to include additional check conditions such as do not commit quantity (commitment qty = 0) if storage location for a component is missing in the production order due to storage location is not maintained/specified for that component in the material master.
Note: In this case the availability check is set (configured) to check at the storage location level.

Dear ,
Availablity Check is not Plant Specific or Storage Loaction spefic .ATP does not check the stock for any particualar stock in storage loaction rather it cheks various stocks based inward and out ward movement time through PR/PO/Dependent /Planned Order /Stock Type irrespective of any Storage Location .
BAPI which can be used :
1.BAPI_PRODORD_CHECK_MAT_AVAIL
can we exclude materials of prod order in availability check
what is availability check concept how it is used in SAP
Check the above if it is useful
Regards
JH

Material Availability Check in Process Order Issue

Guys, I need some help in understanding the folowing issue:
I have a FG and 2 components.I created a process order and tried to release the order. Automatic availability check is done and a dailog box appeared to list out the missing parts. Missing parts list shows both the components. But one of the componet has unrestricted stock to use in the storage location. why did the availabity check show missing part for that component?
I checked pp checking rule and it says for business rule 2 "no check" is unchecked. so that means checking is done. and this pp checking rule is assigned in OPJJ and also assigne dto the material master of the component.
please let me know if you need more information. Thx

Dear you are absolutely correct if you uncheck No check box in material availability in Order control OPJK per plant and order type that no automatic material availability check is to be executed for the specified business transaction (order creation or order release).
But further please note that the option of calling up a material availibility check manually and also of executing a collective availability check is not affected by setting this indicator. This indicator is also ignored if you work with Assembly orders and you have defined in Customizing for Sales Orders that a material availability check is to be carried out.
Cheers
kK

Mass availability check in COHV fails

Hi,
I have daily mass processing job for Collective availability check running with Reset availability data flag in background job.
the job runs around some time 4.30 AM in morning.
Sometime the job fails because of order locking issues ( Order is open in co02) at the time job is getting processed and entire job fails because of this and user looses all the Reservation coomitment data.
USer is asking if we can have any check beofre the job is run itself to find the order locks in advance.
Kindly help me if any notes is there,which can help in this regard.
nay solutions are welecome.

Hi,
There is no option in selection screen as such for checking locked orders. The checking happens within the program when it begins the av. check. The last time I had debugged the program wasn't able to find a specific enhancement spot as such, but maybe you can invest some time with your abaper for this.
If you want to make this work with the std. program, then make it clear to your client, that they should have a window, where there is no processing of orders done. This is required to ensure that all orders are part of the Av. check run.
However if it is not possible for whatever the reason may be, then you can work with your abaper to write a Z program, within which you can make a custom check & include only those SFO's which are not locked for Av. check. However you would then also need to consider how you intend to manage the Av. check for those locked orders.
Good luck.
Regards,
Vivek

Sales Order - Availability check for components

Hi All,
I have 2 parts to my qns.
1. When a sales order is created for a component, with a req date, the system checks & informs if the mtl can be provided on the req date & if not proposes a new date - May i know which checking rule is used & also what all does the system check for?
2. A component say 'ABC' is used internally for production purpose & also sold as a spare part. A sales order for this component is created with a req dt. say 1.3.2008. The system commits the stock to the sales order. A production order is created later with a req. dt for 'ABC' say 1.2.2008. So when i carry out a collective availability check for the plant with ATP checking rule & with availability check reset indicator ticked, i believe the system should reset the commitments made to the sales order & assign the stock to the production order, but it is not happening so. Once the commitment is made to the sales order, it is not resetting, how can i change this behaviour?
Await inputs.
Anyone to help on this?
Edited by: Vivek on Jan 15, 2008 10:56 AM

As we know, availability check is controlled by the combination of checking rule and the checking grp.
U can see this at OVZ9 Screen. checking grp is proposed from material master Sales org 2 view or MRP2 views.
In the OVZ9 screen itself, we are setting what are all the stocks the system has to include when doing availability check.
The checking rule specifies the scope of the availability check for the respective transactions in sales and distribution by specifying precisely which stocks, receipt and issue elements should be taken into account during the availability check.
Every checking rule is allocated to a checking group: together these two elements determine the final inspection requirements. In addition, the checking rule includes a specification whether or not an availability check should take into account the replenishment lead time.
Currently, the checking rule is predefined in SD.
while answering to the second question, i think the system carries out the availability check again at the time of delivery, provided u need to maintain the availabililty check indicator at req. class level.
Hope i answers.
Reward points if it is useful.

PM order - Collective component availibility check

Hello,
Looking for a transaction code which would allows me to conduct collective component availibility check for PM order. Similar to COMAC for PP orders.
Any hints?
Thanks.
Christian

Christian,
Here's some useful info: Collective Material Availability Check for PM
PeteA

Availability Check in planned order

Hi Everyone,
What is differecnce between MDVP collective ATP check and MD12 ATP.
I am getting different result for the same planned order.
could you plase tell me why this so.
Thanks
Siddhesh

HI R.Brahmankar,
Thanks for your quick replay.
But I am getting different results for same materil in MDVP and MD12 Component Avail check.
I am not getting the logic why the system is giving this results.
can you please tell me the same.
Thanks a lot in Advance.
Siddhesh

Availability Check during Planned Order Conversion to Production Order

Hi PP Gurus,
During Conversion it prompts that materials are not available or missing parts log, though in Stock Overview in that Storage Location it contains more quantity(in unrestricted use) that what is needed. Is the requirement date and GR date have some relevancy on this prompt??
Thanks,
Matildo, Edsel
PP/QM Consultant

Dear,
You have tick Include Reservation in T.Code OPJJ Avaibility Check control in assign chcking rule to your order type.Please try without it.
You Can also check collective avaibilty check through CO24,MDVP,COHVPI,CO09.
Regards,
R.Brahmankar

Collective availability check MDVP

Similar Messages

Maybe you are looking for