Color management settings for HP Photosmart d7460 printer?

Hi,
HP Photosmart d7460
Windows 7 Pro 64 bit
I have the above printer, and I have recently used Datacolor devices to manually calibrate both my monitor and printer. I notice that when, for example, I use Adobe Photoshop Elements or Corel Photopaint X4 to print photos, that I am advised to select software to handle color management. I also receive a message informing me that i should switch off printer color management in printing preferences (i.e. the printer driver software). Unfortunately the only options available in the printer driver 'color management' drop down menu appear to be either Colorsmart/sRGB or AdobeRGB. I understand that there should be another option, either 'no color management' or 'application controlled' but it is not present. There is also no option, in this menu, for the ICC profile that I have created for the printer, although the profile is present in the Adobe Photoshop Elements application, and in Corel.
How do I switch off color management by the printer and allow the application to solely control color management? I understand that having both the application and printer control color management can lead to poor colours.
Regards, Chris

does anyone have any suggestions, any help appreciated.
regards

Similar Messages

Color management settings for the best print output

Color Management while Printing has been one of the challenging areas which has been discussed a lot over user forums and has been a painful area in terms of clear understanding while taking print outputs.
Here is an easy-to-understand KB (Knowledge Base) article ‘Color management settings for the best print output’ to help you get the best from your printers using PSE and bridge that knowledge gap.
This article explains color management in Photoshop Elements, how to get better prints, and addresses some of the following issues like horizontal/vertical streaks in print output, too dark or too light print output, ICC profile problems and Color differences between prints from PSE and other applications.
Thanks,
Garry

Thanks Noel.
Yes have shared in PSE forum as well. But I usually drop such posts on PS General forum so community moderators as well as our power users who mostly use both PS or PSE or are aware about can communicate to their students, audiences etc.
The idea is to reach out the message to as many as folks via relevant forums. Most of my otehr posts have found mentioned only on PSE forum.
Thanks for the feedback Nice to hear such a great feedback within 5 mts of publishing
Regards,
Garry

Need color management settings for photoshop version 8.0

I need to reset the color management settings for photoshop 8.0. Can someone let me know what are the correct defaults?

Probably the most commonly used is "North American Prepress 2" but which you choose depends entirely on the kind of work you are currently doing.

Best Color Management Settings for Web in CS3

I've seen tons of info on what color management settings can be used in CS3, but most seemed to favor work for printing. I'm just wondering what settings people think are best for color and B&W photo web work in particular... I already have both the monitor and PS set for 'sRGB IEC61966-2.1', but other than that, there seems to be a lot of opinions. I just want everything to have the best chance of looking the same on other comps as it did on mine. I also have Proof Setup set to 'Monitor RGB'.
Thanks,

1. Calibrate (I use ColorVision's Spyder http://aps8.com/spyder.html , but any hardware calibration device will be better than calibration by eye).
2. Set the Working Space to sRGB.
3. Set the Color Management Policy for RGB to Convert to Working to be sure you are converting content to sRGB. (2 & 3 addressses pfigen's concern about making sure all images are sRGB.)
4. Make sure your monitor is set to use the ICC profile generated by the calibration device.
5. Turn off Proof Colors.
6. Embed profiles or not, but if you do use the sRGB profile. Whether it gets used or not is another story.
As far as B&W, pfigen suggests Gamma 2.2, which would seem to be right for PC. Mac users might consider Gamma 1.8.
This should work well for most situations, but guaranteed consistency is an impossible task at this point.

Color Management, Photoshop CS3 and Epson Inkjet Printer

I have been down this road before but here goes again...
Im using Photoshop CS3.
Im printing on an Epson Stylus Photo RX680 using Photo quality inkjet paper.
I know this printer is capable of very good quality prints.
Thing is I can not figure out the correct combination of color management settings to get a decent print out of Photoshop or InDesign.
I have read that you are supposed to turn off all printer color management and let Adobe manage the color. Doesnt seem to work.
I just get overly magenta images that look awful.
If I let the Epson color management control color I can get a lot closer but the print out is far from accurate or high quality.
So what the heck IS the correct protocol for printing to an Epson inkjet printer from an Adobe app.
BTW, I do seem to get a fairly decent print out of something like a PDF which I understand does its own postscript conversion before hitting the printer.
Is this what my issue is?
Does Photoshop or InDesign require postscript ripper software to get decent results out of an inkjet printer?

Have spent hours with both Adobe and Epson support people. I've read several of these forums. Is there an insurmountable problem with CS3 and Epson (2200/2400 are mine)? I have the Leopard patches and upgrade 10.5.4.
With Photoshop managing the color I get prints that are slightly underexposed and carry a pink cast. Color management is off. With the printer managing the color I get prints that are too green and dark. Epson advice here is to have color management off. There are two other choices for management but to adjust a perfectly balanced print to the printer's whim seem like cruel punishment.
Have a calibrated monitor and my CS2 works beautifully. Perhaps the best idea is to just go back to CS2 until Adobe and Epson can decide what to do. According to Adobe people, the CS3 gives much of the management back to Epson. According to Epson -- with CS3, you should choose the printer to manage the color (since this seems to be the trend between the two companies) but we users are not happy with the results.
What is the solution for right now?

Can't access Color Management options for HP 6700 under Mac OS 10.8.5 (Mountain Lion)

Hello.
I've got the HP Officejet 6700 Premium e-All-in-One and I can't find any way to access Color Management options.
The printer is attached (Wi-Fi) to my iMac running Mac OS 10.8.5 (Mountain Lion).
I want to correct a magenta cast to photographs that I've printed. I've had the magenta-cast problem under Lightroom and using Preview to print the photographs, so now I want to work with color profiles in Photoshop Elements.
Photoshop Elements recommends that I "disable color management in the printer preferences dialog".
However, I'm not able to find color management preferences for the 6700 in any of the settings under Mountain Lion:
Not under (Apple) > System Preferences > Print & Scan.
Not under (HP Utility) > Open Embedded Web Server.
Not under (HP Utility) > Printer Settings.
Not under Preview's print dialog.
Nor can I find any clear direction in the online help (at HP or elsewhere) that I've read so far.
Any suggestions would be most appreciated.
Thank you!
Michael
This question was solved.
View Solution.

Please note that in the Print dialog I get "Color Matching" not "Color Management."
Still, I am (at this point) able to control color from Photoshop Elements, so that's good enough to proceed.
Thanks again.

Best color matching settings for canon pro9500

I tried different settings for printing 13x19 photos. Printer color management, photoshop color management with different color options. Always a difference with preview... Help please. I have no problem when printing with my old ip6700d!

1. Calibrate (I use ColorVision's Spyder http://aps8.com/spyder.html , but any hardware calibration device will be better than calibration by eye).
2. Set the Working Space to sRGB.
3. Set the Color Management Policy for RGB to Convert to Working to be sure you are converting content to sRGB. (2 & 3 addressses pfigen's concern about making sure all images are sRGB.)
4. Make sure your monitor is set to use the ICC profile generated by the calibration device.
5. Turn off Proof Colors.
6. Embed profiles or not, but if you do use the sRGB profile. Whether it gets used or not is another story.
As far as B&W, pfigen suggests Gamma 2.2, which would seem to be right for PC. Mac users might consider Gamma 1.8.
This should work well for most situations, but guaranteed consistency is an impossible task at this point.

Color Management Settings

I'm not sure what to set my color management settings up as! I've been told a few different things! I shoot in Adobe RGB, but I've been told to set my working space to SRGB and then to set the color management policies to "Convert to working RGB, CMYK, and Gray." Then I've also been told to set the working space to Adobe RGB (1998) and then under "coversion options" change the "intent" to "perceptual."
Regardless of which setting I try to use, the coloring when I view it in Photoshop is much more yellow than when I view it on my monitor. I have callibrated my monitor, so I'm assuming the problem is within Photoshop. How do I fix this so that the colors match???
Thank you,
Jacalyn

I've been told to set my working space to SRGB and then to set the color management policies to "Convert to working RGB"
Yes, I'd back up what the previous poster says. Where did you get this advice? its extremely poor advice. If its valid at all, this would only apply to people doing an extremely narrow, low end type of work - destined ONLY for the internet.
'Autoconvert' in Color Settings is pretty nasty, it takes every file and converts it. And sRGB is a pretty dumb profile, I've always reckoned - as Bart says, its low gamut, designed for 'lowest common denominator' displays.
Spyder, and your monitor calibration: (because it sounds like your profile isnt being picked up) - I did some research and believe that there may be a "ProfileChooser" application somewhere on PC? - always thought monitor profiles should be stored somewhere in PC control panels. But lord knows whats happening with these settings on PC these days. On mac it does all this much more intuitively of course.;-)
But here's a thread I found where someone had a problem similar to yours…
http://photography-on-the.net/forum/showthread.php?t=57889

Laptop Losing Color Management Settings When Docking or Undocking

I originally posted this to the general Windows 7 support forum; however, one of the support engineers recommended that I move it here as I'm running Windows 7 Enterprise, so here it is...
I am running Windows 7 Enterprise SP1 64-bit on a Dell Latitude E6540 with a docking station. I have color-calibrated the display on the laptop as well as an external display attached to the docking station. Whenever I undock the computer, the
system resets the color management settings and I lose the color calibration on the laptop's display. I then have to go in manually through the Control Panel and re-apply the calibration profile to get things back to normal.
I have everything set up so that the calibrated profile is the default profile for the system and I've verified that this is the case whether or not the machine is docked, but it still loses the calibration settings every time. All video system drivers
are updated and current as well.
Any thoughts or ideas on how to resolve this issue?
Thanks in advance for any advice.

Sophia,
Thanks for the link to the article. While I still suspect that the color calibration issue is related to the Intel drivers, the only response that I'm able to get from Intel is that it is a Windows operating system problem and not theirs.
To be clear, the issue described in this article does relate specifically to power savings, which are typically only enabled when running on battery. I do have this particular setting disabled on my laptop in order to maintain color accuracy for
my work.
My issue is clearly with the Color Calibration Profiles. The default profile for the laptop, which appears to have no actual calibration at all, has the screen showing a very heavy blue bias. The bias is so strong, that the frames around the
windows, ribbons in the Microsoft Office apps, etc., which should be grey, are displayed as blue. The blue bias also tends to wash out most of the other colors and makes the screen look dull and unsaturated. However, as soon as my Color Calibration
Profile is used, the Windows elements display as grey and the screen colors look much more vibrant. It really is a night and day difference.
When booting up the system or logging into my user account, even on the default blue Windows screens, you can clearly see the change when my Color Calibration Profile is loaded by the system just before it brings up the desktop. Once loaded, it remains
working, as I've said, until the computer is undocked or docked. Then it immediately reverts to the default Color Calibration Profile and the screen shifts back into the blue range again.
I think that for another test, I'm going to remove all of the calibration profiles except for mine and see if that has any affect. If it doesn't, I'll rename my profile to the same name as the default profile and see if that does anything. It's
just something that I thought of now to try. I'll let you know how it goes.

Elements 10-color management settings

Using Elements 10 with MAC; color management settings aren't available

My understanding is in the Print Command, there should be a Color Management option that gives you two options:
-Printer manages colors
-Photoshop Elements manages colors
In Print command, I don't have that option.

I bought a 364 XL cartridge for my Photosmart 6510 printer, but it doesn't fit.

I bought a 364 XL cartridge for my Photosmart 6510 printer, but it doesn't fit—it's too wide. Yet the User Manual I downloaded from HP (helpfully called c02983796) clearly shows an illustration of the XL cartridge fitting in the printer. Advice?
This question was solved.
View Solution.

Hi,
The HP 364 XL Black ink cartridge been updated in September 2010.
Take a look in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02750681&lc=en&cc=us&dlc=en
If your ink cartridge is the older ink cartridge you shoulf contact the retailer to replace it.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

For my power shot S5IS, best camera settings for 4 X 6 prints?

for my power shot S5IS, best camera settings for 4 X 6 prints? I would like to have the best setting so when i print out the photos,i do not need to crop or trim. It is close, but i feel it can be better.

The bad news is that you can't do anything in camera to get that result. The good news is that once you understand the possibilities you'll appreciate being able to control how your prints get framed (cropped). Your camera produces images in a 3:4 ratio while a 4 X 6 is a 2:3 ratio so if you don't know in advance that you need to crop some from the top, bottom, or both to make your image fit the 2:3 ratio & frame too tightly when taking the photo you're in trouble. Learn to shoot in a way that allows cropping to match common print sizes, and find a simple editing program to crop in computer. This should be standard practice because even though you may want a 4 X 6 now down the road you might want a 5 X 7 so keep your options open.
If you don't have an editing program that easily does this & you're on a PC download Picasa which is an excellent program for this & it's free. Once you have it running select one of your existing photos, select "crop" from the menues on the first tab & then play around with the different options Picasa has built in to see the effects to your image. NOTE that it won't throw away the data outside the crop box even though it may look like it has. You always have the option to "undo crop". Once you get a result you like you "export" & create a new file cropped as seen on screen WITHOUT modifying the original file.
"A skill is developed through constant practice with a passion to improve, not bought."

Need driver for HP Photosmart 1115 printer for windows 7 beta

What driver can I use to get this printer to work? Can you also provide installation procedure? Would your recommendation also work for HP Photosmart 1215 printer which I also have?
Thanks

Had the same problem, got it working by using Photosmart 8200 driver. You have to go to add a printer, select Dot4 USB for the port, and then pick the 8200 driver from the list that Windows 7 ships with. Once you do, it just works. My test page printed on the first try. HP could make this a *lot* easier for everyone, but I guess they are in the business of selling more printers.

CS4 Color Management Settings - Confusing for Brother Laser Colour Printer

I am new to Brother's Color Laser Printer and setting up the Color Management with CS4 for a document. Contacted Brother and they do not have informaton for Adobe Products. Here's what occurs when on the Print Screen:
Under 'Options' — CS4 has instated 'Let InDesign determine Color Management'.
Under Printer Profile: 'RGB-SRGB 1EC6' is indicated. I can pull down the menu for other choices. Brother Printers are indicated but I have no idea which one to choose. What is difficult to ascertain is that in one project, I am using card stock. There is no choice available for other weights of paper as there is in MSW.
Inexperience prevails with using a color laser printer with CS4's settings. In other words, should I leave the choices provided by CS4 rather than choose the Brother Printer settings that cannot be explained by Brother?
HELP!

What is difficult to ascertain is that in one project, I am using card
stock. There is no choice available for other weights of paper as there
is in MSW.
With an RGB (no postscript) driver you would access paper and resolution profiles from the Printer... button of the Print dialog. So typically output color would be Composite RGB, Let InDesign Determine Color would be your only Color Handling choice, and you would leave the Printer Profile as Document RGB. Then you would click Print... and you would find paper and resolution settings under the Print Settings pop-up.

Need suggestion on Color Profile settings for printing image

I am trying to print the image below on a Xerox Docucolor 242. Im trying to get a better understanding of profiles and all that, which I THINK I do now.
Under Color Settings in Indesign, I have under Working Spaces, RGB is set to my monitor brand and type and CMYK is set to my exact printer. I have both of the Color Management Policies set to Off.
When I print the RGB version of this image, everything looks ok except for a very faded look. Probably noticed mostly because of all the black background that is used. When I print the CMYK version of it, it seems to print nice and dark but there is a strong white halo effect showing around both the flames which doesnt show on the screen or the RGB printout.
Anyone know what settings are causing the faded look in the RGB printout and the halo effects in the CMYK printout?

As others have said, this is a complex process, but one that is solvable.
I agree with others the RGB profile should NOT be the monitor but the profile of the original image. For most midrange cameras this will be sRGB or Adobe RGB depending on the settings in the Camera when the images was captured. It is NOT arbitary and choosing the wrong profile will have a large affect on the image.
The CMYK profile for the printer is more complex. There are two steps in calibrating and profiling a Xerox printer. First the calibration, or linearisation, sets the printer to a known state that can be repeated. This is best done with a spectrophotometer and not the CalorCal software provided by Xerox which uses a known colour chart scanned from the glass of the copier. The glass method of calibration does not calibrate correctly at the black end of the curve actually turns over reducing the available black, and is due to reflections from the glass. Calibration is normally done daily.
When the calibration has been completed a full ICC profile is created by printing a profile chart of some 2000 colours and reading this with the spectrophotometer. This is only valid for a calibrated printer and for the type of paper used. Different papers will require different profiles. It is a once only operation.
Another thing to watch out for is how your RGB images are being converted to CMYK. There is a setting both in the Creative suite and in the printer to set the black compensation. What you want to achieve is the same black as in the original image. In the CMYK case this will be printed as a combination of black toner pus a mixture of CMY to incread the density. The profile takes care of this for you.
Your description of weak blacks suggests that the black me be being printed as pure black toner.
Ian
NZ ColourManagement.

Color management settings for HP Photosmart d7460 printer?

Similar Messages

Maybe you are looking for