Complete process-contract qty/value

Pl help me for complete process for Contract for many plants at different locations with rates not possible to change.
Thanks,
Haresh.

Hi,
Centrally agree contracts
an enterprise operates with a central purchasing organization covering several plant can ofen negotiate better conditions
option of creating contract that relate not just one particular plant but to purchasing organizations
1) centrally agree contracts enable you to specify separate conditions for each receving plants
2) the plant is not specified until the contract release order is created
3) maintain plant condition in centrally agree contracts in only possible via EDIT-PLANT CONDITION
Regards
KAILAS

Similar Messages

  • Contract net value problem

    Hi,
      I created a  material PO for net value 100 eur for a contract
    of target VALUE 1000 eur.Now i create a GR for
    that PO for 50 EUR.Now i set the delivery completed
    indicator,then i can set contract net value gets updated to 50 EUR.
    Now i created a service contract and service PO with
    same target value and net value
    But in the case of service po,i create a service entry sheet for 50 EUR,then contract net value is not getting updated to 50 EUR.
    Why it behaves differently for material and service POs?

    I have Simulated your issue..
    I have Created a Service Contract with Line Item 'D" for 1000 INR.
    Later I have raised release Order for 200 INR..
    as soon as the Release Order was approved , the Net Value in Contract updated to " 200 INR"..
    Still SES is pending for that...
    If you want I can send you screen shot...

  • Delivery Status in VBUP/VBUK is showing as 'C' completely processed though

    Hi All,
    Delivery Status in VBUP/VBUK is showing as 'C' completely processed though invoice for the delivery is already cancelled, and delivery in document flow says being process. So now I cannot invoice this delivery. Is there any utility to correct the VBUP/VBUK status from 'C' completely to 'A' Not yet processed  As I belive SDVBUK00 is to update the VBUP/VBUK status from A to C only.
    Please help...

    Try using SD_ACTUAL_OPEN_DATA_RESET & SD_ORDER_SUBSEQUENT_ALLOWED FMs to change the values in VBUK table. I have not used it myself but i think this would be of some use to you.
    Regards,
    Mani

  • Differentiate between quantity contract and value contract?

    Hi,
    How can i differentiate between quantity contract and value contract?
    The agreement type of contract is  is not MK or WK , its custom created.
    regards
    N Banu

    Hi
    In Qty Contract you limit the total quantity of items that  required for you;
    It sums the partial quantities of Release Orders with the Contract as a reference.
    In a Value contract, you limit the total value of items to be required when
    you create Release Orders with the Contract as a reference, that is you
    don't work with the quantities as in the first case, but indeed with the
    quantities multiplied by the unit price you fixed in the Contract
    Refer the link for details
    http://www.erpdb.info/qquantity-contracts/
    http://help.sap.com/saphelp_crm40/helpdata/en/d2/650e26a21fe04bba5298afd089b9dd/content.htm
    Regards
    Anand

  • Disable Change Icon in Process Contract

    Hi,
    Is it possible to Gray out or Disable the Change Icon in the 'Process Contract' page via BADI? The only way I know how to gray out or disable it is by customizing the Template.

    Hi,
    You can use the BADI "BBP_UI_CONTROL_BADI" to change the screen appearance in SRM e.g Enabling/disabling icons /buttons,graying out/hiding  fields etc.Also,Checking documentation on the badi, it is avaible for:
    <b>Purchase contract and global outline agreement</b>(Filter value BUS2000113)
    Bid invitation (Filter value BUS2200)
    Bid (Filterwert BUS2202)
    Auction (Filter value BUS2208)
    Purchase order (Filter value BUS2201)
    Purchaser's Sourcing application
    Confirmation (Filter value BUS2203)
    Invoice (Filter value BUS2205)
    Vendor list
    To use this BADI,you just need to know the name of the field/icon in the screen and acc set its display propery parameter in the BADI.
    For sample code of this BADI,refer the foll link:
    Re: Grey out / Display  fields in BBPIV02 transaction
    HTH.
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • Need error mssg for contract qty in sales order

    Hi SD Gurus
    I have created a Quantity contract for XYZ material with say 100 qty. Now if i create a Sales order with reference to the contract, in the sales order i can manually change the quantity to more than 100.
    Here the system just gives me an warning message that qty has exceeded the contract qty.
    I want to make it a error message. In short i do not want to create a sales order of more than the contract qty.
    Checked completion rule for contract item category KMN. But its just giving warning message.
    Regards
    Abhijeet

    Hi
    Abhijeet
    Please find my post on the same subject/ problem. Please click below link...
    Call off order restriction
    Check this as well...
    Copy control to copy quantity from Order to contract
    >OR
    Please follow the path
    SPRO --- Industry Solution Oil & Gas (Downstream) -MCOE (Marketing, Contracts and Order Entry)--Define contract restrictions agsinst yr sales doc type in the field of QTY PUT E.
    Hope this helps you..
    Thanks and Have a Nice Day !
    DK:)
    Edited by: Dwarkesh Thakkar on Jun 27, 2011 7:47 PM

  • How to handle vendor discounts based on the qty / value procured.

    Hello
           How to handle vendor discounts based on the qty / value procured.
    a.       Scenario: you have entered into a contract with vendor that you will buy goods worth Rs 10000/- and if you buy goods worth more than 100000 the vendor says he will give a discount of Rs 5000/- @ the end of the year.  
    i)                    How to handle this sceneriou2019s with SAu2019s
    ii)                   What does STD SAP offer.
    Regards
    Sapman man

    Hi,
    For the discucount condition type, you have to maintain scales.
    Take Condition type -  Discount Value ( RB00)
    Discount Value ( RB00) - Means Fixed discount. For this condition type, you have to maintain Scale basis as Value scale 'B' in the condition type customization.
    Transcation : M/06
    Select your condition type RB00 and click on the details icon.
    In the Scales block, you have to maintain and save.Calculation type = Fixed amount
    Scale basis = Value scale 'B'
    For this condition type, you have to maintain scales in the inforecord.
    Transcation : ME12
    Select this condition type, click on the Scales icon. There you have to maintain like
    From : 10,0000            Rate: 5000.
    It means, if the document value is reached 10,0000 then discount is 5000rs. If the value islessthen the 10,0000 then no discount.
    Regards
    KRK

  • Process contract screen error

    Hi,
       We are in SRM 5.0 version. When we go for process contract screen. A default value is present over there. Even after deleting the value when a number is entered. It appends with the default value resulting in no results found.
    Example
    Contract number default values comes rty
    when it is deleted and entered 457
    systems appends with rty;457 resulting in no results found.
    Please advise on this issue.
    Regards,
    Basha

    Hi,
    as i understood that we need to specify the source system name / name give for your source system in SM59.
    regards,
    Vishwa

  • Pipe line material - complete process

    Hi,
    Can anyone provide me the complete process for pipe line material..
    ie. frm mmr to invoice setlement.
    thanks in advance..

    Hi,
    For Pipeline Process,
    1. Create Pipeline Material under material type PIPE
    2. You need to maintain the Pipeline Info Record in ME11. Here maintain the Prices and Tax Code mandatory
    Also in SPRO > Enterprise Structure > Assignment > Materials Management > Assign standard purchasing organization to plant
    There will not be any PO and GR Process for Pipeline materials. We consider that materials are available via Pipes in our plant and we have tp directly book consumption and then settlement of the same.
    If Stock is directly consumed from Pipeline Stock via 201 P or 261 P via transaction MB1A or MIGO then following FI Entry will appear;
    (GBB-VBR) Consumption Account - Dr
    (KON) Pipeline Liabilities - Cr
    Now do Pipeline Settlement in MRKO. Here you can not change the Invoice Value. Here following FI Entry will appear;
    Vendor Account - Cr
    Pipeline Liabilities - Dr
    Prerequisite for MRKO: -
    - Maintain condition record for output type KONS in MRM1
    Then take printout of the Settlement Document in MR91.
    Also refer following link;
    [Pipeline Handling 1|http://help.sap.com/saphelp_46c/helpdata/en/fd/45c3fe9d6411d189b60000e829fbbd/content.htm]
    [Pipeline Handling 2|http://help.sap.com/saphelp_erp2005/helpdata/en/4d/2b926443ad11d189410000e829fbbd/frameset.htm]

  • Creating ztask for completion for contract

    Hi All,
    I am working in SRM 7.0 and i am aware that in standard system there is no completion task for contract but we have for PO and SC , but I have a requirement where I need to have a completion task for 1st level followed by approval level in the contract approval worklfow.
    Please suggest if this is a correct apporach to copy the task 40007952(completion for Shopping cart ) and include this is the task group 40000003 and use it in my process level. Will this suffice my requirement??
    regards

    Hi,
    my requirement is that if an admin person creates a contract it should go to the contract owner for approval with completion and then followed by approval.
    I am not able to understand what you are trying to do with completion process type? if admin create a contract then it should go to contract owner then contract owner will modify the contract or just approve ?
       if your requirement to give access to contract to modify the contract and approve then YES ,  the note would help you..
    Saravanan

  • Report on Open Items along with Qty & Value for LA confirmed items

    Hi,
    I would like to know a report of Open POs(No Goods receipt made) but LA confirmed Items along with Values(Amount)
    i.e
    List of confirmed,unsent items along with Values for plant wise or vendor wise or PO Number wise.
    Regards,
    Vengat

    Hi,
    Any other inputs?
    Our client's requirement is to know how many (Both Qty & Value) of items for the input LA confirmed(ASN received) but no GR Made
    Regards,
    Vengat

  • Third party process as inventory value

    Dear Experts,
    Kindly need help for third party process.
    We have third party process which triggered from Sales Order. This Sales Order will automatically created PR. PR will be convert into PO.
    The issue is we would like to have goods in Sales Order (or Purchase Order in next process) as inventory value when receiving goods.
    Can third party process be treated as inventory value when receiving it?
    Thank you in advance.
    Best Regards,

    In third party process your customer gets the goods directly from your vendor.
    You only make a statistical GR ("phantom" GR) in the system, the goods are physically received by your customer and your customer's inventory will increase after your customer's GR and not yours. Knowing this your question doesn't make any sense I think.
    If your third party process is not a real third party process and you receive the goods physically and after that you sell it your customer you can use individual PO scenario.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5601d4545a11d1a7020000e829fd11/frameset.htm
    Regards,
    Csaba

  • 544 Movement ,Qty & value is not getting updated in MC.9

    Dear friends,
    MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting   G  in OMJJ.
    I require the info about MC.9 configuration or any info related to this.

    Hi,
    Please refer SAP note 581240 for this.
    For these stocks you have three valuation types for selection:
    ' ' = no inventory valuation
    'A' valuation = without reference to sales document ('make-to-stock
    inventory')
    'M' = separate valuation with reference to the sales and distribution
    document/project
    ONLY stock/stock movements with special stock valuation 'A'
    (make-to-stock inventory) are updated in Inventory Controlling.
    Thus, if you find a document which is not updated in the info structures
    of Inventory Controlling (S031-S039) and you require this, check the
    corresponding documents in the materials management tables. You can find
    the special stock indicator and indicator of the valuation of the
    special stock, for example, in document segment table MSEG in the
    following fields:
    MSEG-SOBKZ = Special Stock Indicator
    MSEG-KZBWS = Indicator: Special Stock Valuation
    Only A type (make to stock ) are updated in the info structures.
    Hoping this helps.
    Regards,
    Rajesh.

  • Contract Version not created when WK Contract (target value) is changed.

    Hi there,
    Problem with the Version Management on a WK Contract.
    When we change the contract targ. value on some of our contracts the new version is not created accordingly. This is only on some of our contracts
    Version Mgmnt is correctly configured and the release strategy in place to be triggered when the target value changes. It does work correctly for some contracts.
    We receive the following message when we change the targ. value:
    "No new version created because a message has not yet been transferred"= Message 027
    Can anyone help or advise?
    Many thx.

    We receive the message on some of the contracts.
    Therefore it can't be due to the output

  • Contract target value

    Dear guru.
    I have a contract with release strategy.
    I change target value and the release strategy is reset.
    I have created a purchase order before change contract target value.
    If i change the purchase order value the system check if this change exceed the contract target value(EKKO-KTWRT) . But this new value isnu2019t released !!
    For me the system must check that the purchase order change exceed the  total value at time of release(EKKO-RLWRT).
    What do you think about this ?

    Thanks ,
    but why the system consider contract target value and don't consider contract total value at time of release ?

Maybe you are looking for