Condition Record is not picking

Dear All,
We are facing the problme while creating Sales Order.
It showing Pricing error: Mandatory condition VR00 is missing
I have done the follwoing activities:
1.Created New Table with MVGR1 and MVGR2 (Material Group1 and 2) and Gennerated
2.Created the new Acess Sequence and assigned to Newly created table
3.Assigend the Acess Sequence to Condition type
4. Created the condition records in VK11
While creating the Sales Order it is showing Pricing error: Mandatory condition VR00 is missing
In the Analysis it is showing Condition record is missing
Please Guide me where im doing the mistake
Thanks
Vinay

Hi Vinay,
If you are getting the error like that means,
In your pricing procedure apart from PR00, other condition type VR00 has been put check box as Mandatory.
Remove that check now you will not be getting that error.
See, you might be mainaianted condition record for PR00, for which its taking properly. But you might not maintained condition record for VR00. Check it out once. Mainainte condition record for VR00 or remove check box for "MANDATORY" in your pricing procedure.
Hope this helps you.
Reward if helpful
Thanks,
Praveen

Similar Messages

Conditon record is not picking in CRM

I have created new condition table with new combination and downloaded to CRM from R/3. After that i have new condition records with that combination and those records also came to CRM from R/3. But when i create service order this condtion record is not getting picked. Now can any one guide me like whether i missed anything.

Hi
You can do a Create PL simulation for that customer product to see why the condition records is not getting picked up. You can set a trace to see the access sequence and the condition type that gets picked up in the service order.
Ajay Gupta

Item level pricing condition record is not getting recognized

Hi,
In our scenario we have to maintain the additional charges based on Plant. For this purpose I have created the condition table 900 which contains the following fields
Sales Org/Dist Chal/Divi./Plant
I have maintained the condition record for the table, Which has been downloaded to CRM successfully.
When I create the order in CRM price of the product is getting recognized where as additional charges condition records are not getting recognized.
When I check the Access I found that header level data .i.e. sales org/dist chal / divion has been recognized and plant has not been recognized that values are like this 00000000000000000000000000
I have checked the plant it has been downloaded successfully to CRM
So, can anybody help me out?
Thanks

Hi,
Check in the access sequnce exclusive indicator activation, it might be selected to the previous Condition Tables, if it is selected than system will not check further available/maintained condition reocrds.
Regards
Naren..

Pricing condition records should not be picked up

Hi,
I have configured a scenario for Supplementary Invoice for which I created a new sales order type. The requirement is such that this order type should not pick the pricing condition records that have been created in VK11. Please suggest how can this be configured.
Do I have to use any Userexits, if so which one?
Regards,
Abhishek

As mentioned by you, you have created a new Sales Order Type, you can create a new document pricing procedure, based on which you can determine a new pricing procedure.
To configure new Document Pricing Procedure:
IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Define Document Pricing Procedure. (Maintain the new Document Pricing Procedure in new Sales Order Type)
Maintain a new Pricing Procedure, maintaining the Condition Types as manual. Maintain the determination of Pricing Procedure appropriately.
Pricing Procedure Determination:
In SD, Pricing Procedure is determined (T.Code: OVKK) based on Sales Area (Sales Organization + Distribution Centre + Division) + Customer Pricing Procedure + Document Pricing Procedure. Sales Area is determined in Sales Order Header Level. Customer Pricing Procedure is determined from Customer Master. Document Pricing Procedure is determined from Sales Document Type / Billing Type (if configured). Once the pricing procedure is determined, Condition records are fetched. If appropriate condition records are found, the price is determined. If Mandatory pricing condition is missing, system will through an error message.
Pricing Procedure Configuration:
In SD, the steps to configure Pricing procedure are as under:
Step 1:
Condition table (T.Code: V/04): If existing condition table meets the requirement, we need not create a new condition table. Considering the requirement for new condition table, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Table (select the required fields combination, which will store condition record).
Step 2:
Access Sequence (T.Code: V/07): If existing access sequence meets the requirement, we need not create a new access sequence. Considering the requirement for new sequence, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Access Sequence (Access sequence is made up of Accesses (Tables) & the order of priority in which it is to be accessed. Here we assign the condition table to access sequence.
Step 3:
Condition Type (T.Code: V/06): If existing condition type meets the requirement, we need not create a new condition type. Considering the requirement for new condition type, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Type. It is always recommended to copy an existing similar condition type & make the neccessary changes. Here we assign Access sequence to Condition type.
Step 4:
a. Pricing Procedure (T.Code: V/08): It is recommended to copy a similar pricing procedure & make the neccesary changes in new pricing procedure. Pricing Procedure is a set of condition type & arranged in the sequence in which it has to perform the calculation. Considering the requirement for new Pricing Procedure, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Maintain Pricing Procedure.
b. Pricing Procedure (T.Code: VOK0): After maintaining the pricing procedure the next step will be determination of pricing procedure. Configuration for determining pricing procedure in SPRO is as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Determine Pricing Procedure.
5. Condition record (T.Code: VK11 / VK12): Condition record is a master data, which is required to be maintained by Core team / person responsible from the client. During new implementation, the condition records can be uploaded using tools like SCAT, LSMW, etc. Condition Record is maintained in T.Code: VK11 / VK12, which are captured in Sales Order & Billing.
Also check document pricing procedure in Sales Document Type (T.Code: VOV8 - Sales order Type, VOFA: Billing Type (If Required)), customer pricing procedure in Customer Master Data (T.Code: XD02), ... are in place.
Regards,
Rajesh Banka

Scale maintained in info records but not picking up in scheduling agreement

Hi,
We have maintained scales for PB00 in info record (subcontracting), this scale is picked up in Subcontracting Purchase Order.
But when we are trying to create Subcontracting scheduling agreement, this scale is not picked up by the system.
Why the system is picking up scales for PO but not for scheduling agrmment?
Regards,

Hey there,
Please check your InfoUpdate Indicator on the scheduling agreement.
The indicator determines which prices and conditions are suggested in future PO items.
Prices and conditions can apply to an entire purchasing organization or to a single plant within a purchasing organization.
For example, if you create a purchase order for a plant for which an info record has been defined at plant level, the purchase order is based on the conditions in the plant info record and not on the conditions that apply to the purchasing organization.
probably your info record is at the Porg level and not at the plant level and hence it's not picking it up.
Hope this helps,
Cheers,
Dhaval

Material Fright Group related Condition record is not captured in billing

Dear all,
As i am creating Credit Memo with respect to Credit memo Request (Sales Order) and my freight condition record is maintained in Material Freight Group level. This field is there in Sales Order but when i am creating Credit memo it is not captured and also i am unable to find Material Freight Group field in Billing Document.
Please help urgently.
Regards,
Chirag Pedhadiya.

Hi...
But why we have to write this code in User Exit. Is this Standard SAP Problem ??
I just wonder that in Delivery Related Billing Document it is finding Material Freight Group related Condition record in Billing means in Billing Pricing it is getting value in Material Freight Group filed and set this condition record value, though there is no any field like MFRGR (Material Freight group) in Billing Tables VBRK or VBRP.
So for Order related Billing Document only why this filed is not getting any value in Pricing ??
Thnaks,
Chirag Pedhadiya.

Condition record's not getting copied in local client copy !!!

Hi ALL,
I have a one question/doubt regarding local client copy.
Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
Message no. VJ000u201D
Can u pls suggest proper way to copy/transport condition record in new client created?
Regards,
C Singh.

Please refer below link
http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
Regards,
Pavan

Condition Record (NACR) not recognized - why ?

Hi everybody,
for my custom output type ZALE - concerned with IDoc triggering - I have defined to condition records,
ZECO - eCommerce Order and
ZECR - eCommerce return
for the purpose to automatically generate output events, when the corresponding document types change.
Things are working fine. However not 100%.
In tcode VA02, in output control (menu option "Extras" / "Output" / "Edit"), the two document types (ZECO and ZECR) behave different:
- for ZECO, the system automatically proposes a new ZALE output record
- for ZECR, there is no automatically proposed ZALE output record !!!
Any idea, why this different behavior for identical customizing?
Thanks in advance for enlightment.
Best Regards
Gregor

Hi,
just to clarify:
- the setup as such is working - I can manually assign the ZALE output type, save and generate the IDOC
- what's not working is automatical proposal of the ZALE output type - supposed to work on behalf of the defined condition record
Another hint, -playing a bit with the document types, I found out
- ZECO can be created from scratch
- ZECR requires a reference for creation
My suspition: different setup of the document types also influences the output control!?
Thanks and Regards
Gregor

Condition records are not showing in Invoice

Hi Experts,
My List price for XXXX material is amount $$$$$. Condition records having required validity.
But the values are not showing in invoice though the pricing analysis shows green for this condition type.
Condition values shown perfectly in preceeding documents.
Analysis message says " Condition record exists but has not been set "
Can you please suggest me, why this condition values are not shown in net value and suggest me the fis.
Thank you in advance.
Edited by: Ganesh B on Feb 4, 2010 4:45 AM

Hi,
Goto the T. Code "VF03".
Enter your billing document number.Enter.Check what is the pricing procedure determined here.Goto the T.Code "V/08".Check whether that condition type present in that procedure.
If so check the validity of the condition records.Ensure it falls under your billing document date.Also ensure that it is not marked for deletion.For this goto the last column in the condition record screen "VK12 T.Code".Ensure that this check box is not ticked.
And you are telling that you are able get this one in previous documents.
Goto the T.Code "VTFA(if your scenario is order related billing)" else goto the T.Code "VTFL(If your scenario is delivery-related billing)".
Select your valid combination.Double click on item.Select your item category.Details.
Make the Pricing type as "D" and pricing source as "blank".
Regards,
Krishna.

Condition Type JSRT not picking Condition Base Value in Pricing Procedure

Hi Friends,
In a procedure System is not picking condition base value for condition type JSRT. I have checked the tax procedure and found alternative Cal Type is 17 and is working fine for Domestic vendors.
Friends i need your help in sorting out this issue. Pls suggest what I can check in order to sort out this issue.
Rgds, Krishan Raheja

Hello!
In TAXINN the base value for the condition JSRT is picked up from step 100.
I suggest that you change the "From" value to 100 instead of whatever you may be using
Then test the transaction once again.This will not affect your normal service tax calculation either. So please make this change & try using S1 for planned delivery cost.
Hope this helps !
Cheers!
Plauto
Edited by: Plauto Abreu on Feb 11, 2011 9:03 PM

Condition type JEXP not picking in sales order

hi
i was working with all configuration of TAXINN
i am facing with a problem
when i am running mine sales order i am not able to see condition type JEXP(BED) , JEAP (AED)
can i now where i am gng wrong
whereas i can see all the other condition in sales order
but when i enter it manually JEXP it is taking but in again in billing it is not showing
can u plz help me
Regards
Vini

Dear Vini,
Please Check the configuration settings through IMG path
SPRO>IMG>Logistics general-->Tax on Goods movements >India>Basic settings-->Determination of Excise Duty -->Maintain Excise defaults here you check JEXP condition type is maintaining for A/R BED or not if not maintain then try.
Also check the condition record maintanance for the JEXP condition type through VK12 transaction.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Oct 1, 2008 6:51 AM

Condition record table to pick printer

Hi Friends,
What is condition record table, based on this table how can i pick the printer? and how I can find this table? can any one help me its very urgent.
Regards,
DVNS.

You can see the list of processed document through output types in the table NAST.
Check the table TNAPR in SE16. It will have all the output condition records assigned through transaction NACE.
You can find the output types in the field KSCHL of TNAPR table.

During MIRO Condition line item not picking against Delivey Note

Hi,
We create a PO with Entry tax condition type. Problem is....
Case 1: - When we are doing MIRO of this PO, Entry tax condition is showing in line item.
Case 2: - When we are doing MIRO against Delivery Note of related PO, Entry tax condition is not showing in line item...Why???
Note: - During testing we found 2 diff. thing for both case..
1. In Case 1 during MIRO, Variance Type showing values (B & A)...
...........B for Material Line Item.
...........A for Condition Line Item.
2. In Case 2 during MIRO, Variance Type showing value only B..
Please guide..

Hi
Check this thread
MIRO - Tax Code
Thanks !
E.Avudaiappan

Service scenario Freight condition value is not pick up in Service entry sh

Hi,
I have done Service PO and assigned freight condition in header level as amount 100 and complete the service PO, then we have done service entry sheet wrt Service PO and check in GRN detail we are not getting the Freight value in as 100 separately.
i am using freight condition as YDFR as delivery cost indicator B assigned.
User required in freight value in GRN and secondly it is comming in Normal GRN its not showing in service.
please suggest me
Thanks
Shital

Hi,
This is clients requirement and we have upgraded in R/3 4.7 to ECC 6.0 so same thing working in R3 4.7.
so we put freight value as header level in PO and complete the service entry sheet and check the FI doc we didnot get the separate freight amountor not added in also. we get only base value as 1000 not get 100 freight amount. in R3 4.7 it is showing separately
we need this please guide me.
Thanks
Shital

Re : Condition record not getting picked

Hi All,
This is with reference to Inter-company PO.
A condition record has been maintained for MWST condition type(for key combination of Departure country -ID & Destination Country BE).But the system is not picking this condition record but it is picking the condition record maintained for MY to BE.
Could you please tell me where I need to check if a condition record is not getting picked.
Regards,
Mahesh.

Dear Mahesh
- Check your Ship To Party Country
- Ensure that the tax code you have maintained for the combination of ID -- BE
thanks
G. Lakshmipathi

Condition Record is not picking

Similar Messages

Maybe you are looking for