Conditions for contract workflow approval  agent.

Y'all,
I would like to know if its possible to have conditions in the WS14000088 contract workflow to assign the approval agent/user depending on contract values, for example i mean:
"if the contract has an specific value at item level then assign the approval to the business unit manager... or if the contract has an specific value at header level then assign the approval to the category manager..." etc.. etc..
Is it possible? if yes, how do you commit it into the system?
Regards,
Gerardo.

Hi Jerry,
Yes it is possible to have a conditions to assign and determine the approval agents depending on the value of the contract.
Goto tcode SWDD and for the appropriate task in the workflow 'WS14000088' create the condition. The work item for this step can be executed when this condition for work item generation is met. If there is a requested start for this work item, this is checked separately when the condition is met.
Reward points if the answer is helpful.
Regards,
Andy.

Similar Messages

  • N level-Approval for contract workflow (WS14000148) in SRM

    Hi SDN'rs
                  I want to activate N level-Approval for contract workflow (WS14000148) in SRM  
    When I am creating the contract in SRM I can see the approvers in the approval preview.
    But when I release the contract and look at the approval privew there are no approvers
    and the status of the contract is released.
    We are on SRM Server 5.5 and SP 07.
    Here what I did
    1. I implemented the BADI 'BBP_WFL_APPROV_BADI' using the sample implementation and populated the approvers.
    2. I activated events SAVED,CHANGEVERSIONSAVED for WS14000148 in OOCU transaction.
    3. I see event linkages for WS14000148 for both events SAVED,CHANGEVERSIONSAVED in SWE2 transaction.
    4. I assigned role SAP_EC_BBP_PURCHASER to for subworkflow N step for contract WS14000147.
        ( User who is creating contract has this role)
    5. Consistency check for WS14000148 is green and WS14000147 is yellow in SWUD
    6. Event simulation for BUS2000113 and events SAVED,CHANGEVERSIONSAVED shows WS14000148 successfully started.
    I see dump in ST22 with errors TSV_TNEW_PAGE_ALLOC_FAILED and SYSTEM_NO_SHM_MEMORY with WF-BATCH is this any thing to do with that?
    If any one know what are the steps I am missing please let me know.
    Thanks
    A S

    Hi
    Please refer to these OSS notes which might help.
    <u>Refer to following OSS Notes -></u>
    Note 735026 - Memory problems at BBP_GETLIST_INDEX_FILL
    Note 932836 - BBP_GETLIST_INDEX_FILL: Activation not possible
    879528 WS14000148: Send mail to initiator incorrect
    901200 WS14000148 dia wrk item despite NO_FURTHER_APPROVAL_NEEDED=X
    879873 BUS2000113: The Object_ID attribute may be empty
    903015 BAdI Workflows: Events and parallel steps
    901068 BAdI Workflows: Enhancement of Note 896556
    769458 Dynamic workflows: No adjustment after document change
    972757 Occurence of the SYSTEM_NO_SHM_MEMORY runtime error
    741864 FinBasis: Termination TSV_TNEW_PAGE_ALLOC_FAILED
    864473 Deactivating the shared memory when searching by prefix
    928642 Container factory: Shared memory dump update
    Refer to these links.
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/26/0f8b41ed891609e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/6b/eca441eea7ef0be10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/f7/a6a3415e34b05fe10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/6b/eca441eea7ef0be10000000a1550b0/frameset.htm
    </b>
    <u>Also raise an OSS message with SAP as well.</u>
    Regards
    - Atul

  • How to create new starting conditions for a workflow of shopping cart

    Hi all,
    How to create new starting conditions for a workflow of shopping cart
    SATYA

    Excecute SWB_COND
    Creating New:
    Click on Create button. If you cannot see that it could be a authorization issue
    then Business Object:  BUS2121
    Double Click the event linkage for one step workflow
    Define the expressions, Check Consistency and click on Traansfer
    Start Condition is created. If it is not Active click on the Red Button to make it Active
    Editing Already existing:
    Click on Edit Button If you cannot see that it could be a authorization issue
    then select Business Object:  BUS2121
    Click on the condition part (White area) of the start condtion needing editing
    Change the expressions, Check Consistency) and click on Traansfer.If it is not Active click on the Red Button to make it Active

  • Cannot find workflow WS14000109 in Define Conditions for Starting Workflows

    Hi All,
    I have a query regarding workflow in SRM 50. I am not able to find the WS14000109 workflow  in the SPRO setting ->Define Conditions for Starting Workflows.
    There is thread ->
    Activating workflow  with a similar issue, but it has not solved my problem.
    Regards
    Sam

    Hi,
      In the SPRO setting ->Define Conditions for Starting Workflows,in the selection criteria "BUSINESS OBJECT",select the BOR "BUS2121" (Shopping cart) and then see whether you can see the WF in the list.
    BR,
    Disha.
    Pls reward points for useful answers.

  • How to set the conditions for item deletion approval workflow?

    Hi,
    I have created approval workflow for item modifications ie, when user try to modify an item, it will send a mail to Project Manager. For that I set the conditions in Change the behavior of the overall task: 1. When the task process starts 2 . When the task
     process completes .
    Change the behavior of the single task: 1.when a task is Pending.
    [I followed this https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx ]
    My Requirement is that I want to set this same workflow for the scenario: when the user deletes an item it will send a mail (intimation mail for item deletion) to Project Manager. here i dont want to send modification mails when user deletes an item.
    When user modifies an item: 1. intimation mail, 2. Approve/Reject mail 3. intimation for approval / rejection mail.
    When user deletes an item: 1. intimation mail.
    How can we set it in one approval workflow?? where i have to set the condition for sending either item modification mails or deletion mail.
    Thanks,
    Praveen ji

    Hi,
    According to your post, my understanding is that you wanted to start approval workflow when item deleted.
    You should first make some changes to trigger the workflow when you delete the item.
    You can use the Event Receiver to achieve it.
    In order to trigger workflow on item delete you need to create event receivers and from event receiver call the workflow already attached with list.
    http://ravendra.wordpress.com/sharepoint-workflow-on-list-item-delete/
    You can also create custom action to start the workflow, you can refer to the following article, then modify the workflow as your need.
    http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=50
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Confirmation - workflow approval agent change not reflected in BI Report

    Hi Experts,
    We have implemented SRM 5.0 and have enabled confirmations for POs and this is a classic scenario.
    When a original approver for the confirmation approval workflow was subsititued by an another user, this information is not part of the BI reports. when I checked the document, there was no change document initiated due to the agent change in the workflow. Due to this the delta upload process for BI, is not uploading this information to the BI system for reporting.
    If I run the full or regenerative mode, then the data is getting populated into the BI system. But I would like the delta process to pick it up.
    1. please let me know how to enable the change document for a confirmation, even when the agent is changed in the workflow.
    2. or if delta process to capture the agent changes within the workflow for confirmation.
    Your help is much appreciated.
    Vijay

    Hi,
    On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
    Regards,
    Bhagyarekha.

  • Single condition for contract and domestic sales

    Dear All,
    I just want to know is there any possibility to go with one condition type for contract and regular sales as in case of regular price will be determined automatically and not modifible, where as based on the requirement contract price condition will be created.
    Now under this process there is a problem and it is picking contract price in regular sales order also, but i want contract price need to be triggered only when it is referenced.
    Thanks
    Srini

    Hi,
    As I understood you want to have same Condition type (Say PR00) to have in  both Sales Document types. (In other words to have same condition type in both pricing procedures used for Contract & Sales Order)
    Since you want to set "Not modifiable" when it's in the sales order & when it's in Contract you want to manually enter same condition, this is not possible.
    Because, "Manual entries" control is inside the Condition Type.
    IMG Path:
    Sales and Distribution -> Basic Functions -> Pricing -> Pricing Control -> Define Condition Types -> Maintain Condition Types
    Therefore you can set it only for a condition type. Where is for PR00 it's either "Manual entry has priority" or "No limitations" or "Automatic entry has priority" or " Not possible to process manually"
    Therefore you cannot have same condition to satisfy both requirements. In that case you have to have 2 condition types,
    Best regards,
    Anupa

  • Workflow Approver Agent

    Hi All,
    I am working on a work flow scenario, where an a letter is generated as a PDF and is sent for approval to the manager. Once the manager (i.e. approver) accepts the letter, we send the letter to create a spool to be printed and in addition archive the letter to the contact object of a business partner.
    Whenever the contact is created from the workflow, the user name of the creator of the contact (ERNAM) is updated as 'WF-BATCH'. The requirement is to get the name of the approver as the creator of the contact instead of 'WF-BATCH'. I can modify the filed ERNAM by using some function modules.
    However, my problem is where to find the name of the user who approved the letter? I can get the initiator of the workflow in the field WFINITIATOR. Could you please let me know the field that stores the name of the agent who approved the letter?
    Thanks in advance.
    Regards,
    Manohar Dubbaka.

    Hi Manohar
    WF-BATCH is getting assigned to the ERNAM field because you are not assigning anything to the same explicitly. I'll suggest you to create a new Wf Container Element and assign _ACTUALAGENT (The Task Container Element) to it. Do it after the contact is created from the workflow.
    And as already mentioned by Karri, in case you want to use the same in a FM/program then call FM: SAP_WAPI_READ_CONTAINER within it. Let me know in case you need its sample code.
    Hope this helps.
    Harsh

  • Service condition for contract

    HI,
    i have created service condition and I am trying to create a contract with reference that predefined activity ,in that the price is not coming automatically from the condition master ,(but for the purchase order the price is coming automatically  ).why the price is not populating from the condition master while creating the contract?
    Regards,
    Renuga.A

    Hi,
    can any one guide ,in service contract why the price is not coming automatically  from the service condition master .
    Regards,
    Renuga.A

  • Conditions for Contract and SA

    Hi
    I have prcing proceure attached to schema and vendor. But when I go to create a scheduling agreement and in item conditions I do not find those conditions which i find in standard PO.
    Even in Purchace Info Record conditions I am not able to find the same.
    Regards
    Eldee

    The reason is you have created new pricing procedure and did all other config so it is available in the PO but not in the other document
    First of all the pricing procedure you have created has to copy to other pricing procedure and give the name as Supplement Price and remove the PBXX condition from this pricing (second gross price)
    Then go to your main gross price ciondtion like PB00 and add the supplement pricing procedure in the condition (master data section)
    now you will see this pricing in the Info as well as in the SA

  • Conditions for starting WF - BO BOR Purchase contract

    Hi all,
    we have SRM application rel. 5.0 (Server 5.5) and our need is to deactivate contract's approvement, about a contract just approved, whe user modify some fields in header or item data on contract.
    Under dir SPRO --> SRM --> SRM Server --> Cross-application basic settings --> SAP business workflow --> Define conditions for starting workflows i have selected following values: "BOR" - "Purchase contract" and event "CHANGEVERSIONSAVED" and i tried to managed Start routine n° WS14000086 e WS14000088 with expression "Changed fields" using field CRMD_ORDERADM_H-DESCRIPTION, for example, but in this way i only got issue that approvement flow doesn't go !!!!
    Did i follow right way ? miss i something ?
    May you help me ?
    Best regards,
    Nick.

    Hi,
    It is either possible to use workflow (or) not to use workflow.
    It is not possible to deactivate workflow in the middle of the approval process. for example if the approver changes the contract and approves, then the contract will be approved if it is single step approval.
    if the approver changes the contract and then approves , then it will be send either to the next approver (or) creator depending on workflow security leve.
    But i am sorry it is not possible to deactivate workflow in the middle of workflow process.

  • Custom field in start conditions for workflow WS14000044

    Hi all,
    We have a requirement where a value of a field is coming from the catalog to the shopping cart via the customer fields (provided by SAP). we want to use it as a start condition for the workflow.
    The issue we are facing is that the customer fields are not visible as start conditions for the workflow WS14000044.
    Is there a way we can make them visible?
    We are using SRM 5.0
    Thanks in advance
    Kishan

    Hi ,
    start conditions are specified based on reqhead , i am not very sure wether the customer fields are available there.
    since they are not available there , you can not see them in the start conditions.
    please check wether you can find any notes which deal with implemenation of customer fields in the start conditions.

  • Released Contracts workflow

    Hi team,
    I have a requirement in SRM 7.02.  We are creating contracts and replicating to ECC system via idocs only.
    In SRM we are using only Strategic sourcing and contracts only.
    I just wanted to know , suppose  contract is created in SRM system  and for triggering Aprroval WF what are the conditions I can consider?
    ( customer interested on n level approval. )
    Generally for SC, we will check value of SH and account assignement like that for Contracts what would be the conditions for triggering WF??
    and one more question is  when contract will come into "Released status" means Released contract will trigger approval WF  in SRM or approved contract will come into "Released" status and replicate to MM system - Please confirm me.
    Thanks,

    Hi,
    You can trigger contract workflow based on value and in a lot of cases its based on the document type. For example:
    Start conditions:
    &Purchase Contract.Transaction Type&            ZSCH and
    &Purchase Contract.Transaction Type&            CCTR    
    While in the SRM application if you go to transaction SWB_COND, you then search for Business Object (in your case contract) and here you can see/maintain the start conditions for each workflow.
    In relation to the released status, if the contract goes for approval only after it is completely approved then it will go into Released status.
    I hope this helps,
    Lisa

  • How to add new attribute for triggering workflow?

    Dear Expert,
    I want to create condition for triggering workflow.
    I am working on travel request workflow, using BUS2089.
    my requirement is to differentiate or make condition of triggering workflow based on trip activity type,
    but I can't find any attribute about trip activity type.
    how to add activity type to be available for create condition?
    thanks

    Hi,
      If am not wrong you are trying to raise event when ever there is a new travel request raised, so the BOR would be availbel in the workflow container to be more preciese it would be available in the event container, so you need to find out the right attribute in the BOR where the trip type is assigned and validate this in the start conditions i mean in the basic data of the workflow where you activate the event linkage.
    Regards
    Pavan

  • Z field in the start conditions of a workflow

    Hi all,
    Is it possible to add a z field in the start conditions of a workflow?
    My requirement is to use a z field created in the shopping cart, in the start conditions for the workflow WS14000044.
    Thanks and regards
    Kishan

    Yes you can undo the delegation at any point of time not to worry. It is just atable entry.
    Go to swo1->Settings->Delegates
    If you want to use a Custom Business object that is a delegate of a Standard Business Bo you can use it. You create a Virtual attribute in your custom Business Object. If you delegate the Custom bo with Standard BO. Whenever you refer to standard Business Object you will have this Custom attribute in your kitty. This will help in start Condition.
    <b>Reward points if useful</b>

Maybe you are looking for

  • Strange problem when opening new message.

    I have a rather annoying problem when I open a newly received SMS from a particular contact (lets call him Bill). When I open the new message from Bill, either by swiping to unlock or touching a banner message at the top of the screen. Instead to bei

  • Flickering on DVI external monitor connected to 2009 Macbook

    This is an ongoing an intermittent problem. At one point Apple phone support suggested that engineers are working on the problem but I haven't heard any updates. The problem is with a 2009 macbook (13 inch) connected to an apple display (from 2008) b

  • Z10 loses signal during a call

    I have a issue with loss of signal during a call on my z10. When the automatic mail checking enabled and during a call mail is checked, I hear snatches of words and communication break, look at the screen see the message "network is busy" and zero si

  • I have deleted the lightroom directory. I have a copy. How do I connect it.

    How do I connect a copy of the lightroom directory to the catalog of pictures?

  • Change (default) color 'blue'

    Hello experts, my problem: i want to change the default color 'blue'. In 'green'. I meen for example ui-element captions is with the attribute rowBackgroundDesign blue, or by tables with CellDesign standard are the readOnly columns blue. I want it in