Connection to BI Answers

Hi All,
Thanks in Advance, i have downloaded Jdeveloper11g and i want to connect to OBIEE answers.
Could your please tell me how do i proceed to make connection with obiee Answers.
Regards,
Som

BI Publishers has limitiations on the password. Try a short one without special characters.

Similar Messages

Facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419

Business Line & BB : not connected and no answers

after 10 letters , 10 texts and 10 phone calls from BT reminding my of the appointment , you have done nothing.
No engineer , no connection and no answers.
we have a shop opening which has been based on BT coming to connect a phone line & Fireoptic BB which will run all our systems online and we are now all standing looking at each other wondering how this could be any worse.
All i am being told is that we will get an update next week which is unacceptable.
I need answers so we can at least work to a plan. Please PLEASE advise!
Solved!
Go to Solution.

Ridout wrote:
after 10 letters , 10 texts and 10 phone calls from BT reminding my of the appointment , you have done nothing.
No engineer , no connection and no answers.
we have a shop opening which has been based on BT coming to connect a phone line & Fireoptic BB which will run all our systems online and we are now all standing looking at each other wondering how this could be any worse.
All i am being told is that we will get an update next week which is unacceptable.
I need answers so we can at least work to a plan. Please PLEASE advise!
Sorry wrong forum.
This is for customer to customer home users only .
Suggest you ring them again, pop over to the Business forums http://business.forums.bt.com/ or take them to court.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection? Any answers specific to Japan would be helpful.

Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection? Any answers specific to Japan would be helpful. I would prefer not to take my old Dell laptop and just be able to use my Ipad 2 via the wireless connection that the Airport Express creates. However, I can configure the Airport Express at home prior to leaving if that is the best thing to do.

I have a very similar problem with my AE! My MacBook, MacBook Pro & iPod Touch (1st Generation) all get a GREAT signal from our AE. BUT, our iPod Touch (2nd Generation) and new iPad (WiFi) get terrible signal strength unless we're right next to the AE!! Tech support at Apple is of no help! I'm ready to sell them all! This all started when we got the last OS update for iPod Touch/iPhone/iPad. So it must be a software issue not a hardware one..
Any ideas?

Created .rpd file but how do I connect in OBIEE Answers?

I have created a .rpd file using an Essbase connection but am now stuck on how I connect an Answer query to it in the OBIEE dashboard tool itself. When I create a new analysis, I do not see my newly created .rpd in the list of available connections. Should the RPD be saved in a specific folder? Do I use some fucntion within OBIEE to connect to the newly created .rpd? Am I missing out a section where I connect to the .rpd file, like in FR when you connect to a new Datasource?
Thanks

Hi,
You need to make the repository online for queries. Follow this:
- Login to Weblogic Enterprise Manager http://SERVER:7001/em
- On left pane, go to folder Business Intelligence --> coreapplication
- Go to "Deployment" tab and then "Repository" tab.
- click on "Lock and Edit configuration"
- Select repository to load, enter repo password and then click Apply.
- Then click Active Changes and then Restart all obiee services.
Once this is done, you'll be able to see and work on your presentation schema in Asnwers.

IPhone 4 / iOS 6 drops bluetooth connection when I answer a call using handsfree link in car.

Honda Crosstour 2010. Handsfreelink and phone pair ok but when I go to answer a call via the talk button on the steering wheel, the connection drops and I have to use my phone to talk, rendering auto bluetooth useless. I have to manually reconnect the two to get car and phone bluetooth working again. Honda and Verizon both point to Apple as the problem...

Follow basic troubleshooting found in your user Guide for your phone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414

AE Keeps refusing connections (still no answer??)

So, we have an AE and when I plug it in, it works fine. Users can connect and all is well.
After a little while (sometimes a few hours, sometimes days, sometimes minutes) users are not able to connect to the base station. When trying to connect from their computer it keeps asking for WPA password and times out. The only way I can get connections back is to power cycle the base station.
I have noticed that several people on the forums have this problem, and I have yet to see any fixes, is this a known issue? Is there a way around it? Thanks all.

The same here... I upgraded to Leo last december... not really any issues since then. Up to 2 days ago, suddenly I got kicked out of my airport. Could see it appear in my menubar, but as soon as I selected it it gave me a prompt to enter my WPA key. After entering the connection times out.
I reset my basestation, this time with no security... it worked fine, for about 5 minutes. Then I got kicked out again.
Another reset, same story... But now I cannot see the basestation with the airport utility anymore. I see the accespoint in my menu, but when I select it nothing happens. It wont connect.
And now the weird part. All these times I could connect with my iPhones without a problem. The basestation has been running for over a day now. No connection with my iMac, but with the iPhone, no problems.
I have deleted all my preferences (as far as I could find them). But dont want to reinstall my entire OS because of this.... but then again, I dont really like the UTP cable that is stretched through my house also.

Huge speed drop and connection problem when answer...

About 2 days ago my internet speed dropped hugely and it's almost now unuseable. I've run a speed test and the results are below. Any idea on what to do to get this resolved?
Also, every time I answer a call or disconnect a call the broadband connection is los which is very annoying! Again, any ideas about thats causing that?
Test1 comprises of Best Effort Test: -provides background information.
Download Speed
102 Kbps
0 Kbps
250 Kbps
Max Achievable Speed
Download speedachieved during the test was - 102 Kbps
For your connection, the acceptable range of speeds is 50-250 Kbps.
Additional Information:
Your DSL Connection Rate :2432 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 135 Kbps

AndyMc what you have supplied is the wireless connection rate between the router and your wireless adapter this is not related to anything from Bt. This is the connection rate which I am sure would be related to a channel issue more than the connection dropping. Here is a link to the help site that will assist especially the link with regards changing the wireless channels. http://bt.custhelp.com/app/answers/detail/a_id/11381/c/346,1887,1889
Make the change and then disconnect and reconnect the wireless and notice if the connection rate changes. I am sure you will get some interesting results. A good little tool you can use is an utility called inSSIDer just do a google search and install that, it will show you where there may be a conflicting channel issue, the non shared channels are 1.6.and 11. If you need to diagnose the dropping connection problem then that is a different issue to the connection one.

E72-Packet Data connection message when answering ...

I get the following message when I dial or answer the phone: "Packet Data Connection on hold".
When I hang up I get: "Packet Data Connection active".
First of all, I don't know what packet data connection means nor do I have a need to know as long as the E72 works, which it does.
How do I get rid of these stupid messages?
Thank You!

Look for the usual suspects as Nokia Messaging, Mail for Exchange, etc... that run in the background and need a connection. But if you don't want to know I'm not telling you.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Wifi connectivity issues: The answer may be here.

I had been having issues with my Droid 3 connecting to my home router. I would put the password in and it would go through the cycle of connecting and disconnecting for no apparent reason. I searched online for a solution for this and found nothing helpful. I also found that a lot of people are having the same problem. So, I did a little searching on my router's settings. (http://www.daniweb.com/hardware-and-software/networking/threads/39326) Everyone's router is set up a little bit differently. However, if you click on Wireless, and then Wireless Security, it should tell you what your WPA Shared Key is. I entered this key instead of my password and, hey, look at that. My Droid finally connected to my wifi. Hope this helps.

Ohmigosh! THANK you! I just installed a new router, my old one was an 8-year-old NetGear, which I had no trouble connecting to with my LG Lucid. The new D-Link and my Lucid simply would not hook up. It just kept 'obtaining IP address'. Grrrr....
It would be nice if LG would ask for the WPA Security Key instead of the password.
Again, thank you thank you!

IChat connection to AIM ANSWER INSIDE

It seems the OS X Lion security update 10.7.2 stops iChat from working. The answer is to do the following:
In iChat go to iChat > Preferences > (Select your Account) > select Server Settings
From here, uncheck the "Use SSL" which will change the port from 443 to 5190.
Close out of iChat and then open again and it should work.
Apple, I believe your "security" fix of OS X Lion is doing something to port 443 that it shouldn't be doing. This issue is happening for AIM and @mac/@me users, gmail gchat users seem to be ok.

If you still want to use SSL you can change the server to slogin.oscar.aol.com with port 443 and check SSL. Seems to work for me.

BI Answers connection problem

Hi
I am getting the below error when I am trying to see the result in BI Answer
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 1017, message: ORA-01017: invalid username/password; logon denied at OCI call OCILogon. [nQSError: 17014] Could not connect to Oracle database. (HY000)
SQL Issued: SELECT Customers."Cust State Province" saw_0, "Sales Facts"."Amount Sold" saw_1 FROM SH ORDER BY saw_0
The customers and the sales facts table both have data .
I had viewed the data in both the above tables by right clicking the above tables to view data in the plysical layer.
also my ODBC data source has been tested successfully...Its working fine...
Please suggest.
s

>
... ORA-01017: invalid username/password; logon denied ...
>
Pl verify that the connection setup in Answers includes a valid database username and password.
HTH
Srini

How to communicate with a remote application that uses http post to request connection

Ok, I will try to make this simple as to avoid any
confusion.
I am trying to receive connection requests from remote applications installed on user pc's.
The application uses POST method to send the request to connect to my database, and if required update some tables.
The application is not a webpage. I have no access to the internal workings of the application nor do I have any specific information about how it sends its POST. I am sure of the following:
The app will POST to my .cfm page
"IsConnectionAllowed" = "yes"
This is asking my cfm page if its ok to connect. I would need to use a <cfif> to verify the the first part of the POST is in fact
"IsConnectionAllowed" = "yes"
If this returns true, (the app also uses to POST to pass "username" and "password") my .cfm page will then perform a query and check the username and password against the database. If a matching record is found, the application expects my page to reply with
"#Answer# OK- connected;"
Once the answer is given the application will then respond with data to insert or update my tables.
Now, I know how to do the queries and update tables etc, but I have never received data from an application before.
I tried using the <cfform> tag with a mehod of GET, and then trying to send my reply with <cfoutput>, but that didn't work. The application doesn't give any feedback or error messages. It either connects or not.
I also tried the <cfhttp> tag, but that didnt work either. I am not very experinced with coldfusion. I used it years ago and am just getting back into it.
I am sure this is a pretty easy thing to do, but my methods arent working.
Using the above information, can somone please show me how I would accomplish this communication? I can then use the same method to retrieve the data for my table updates and queries.
Here is a sample of what I have already tried:
<cfform method="get">
<cfif>
"IsConnectionAllowed" = "yes"

<cfoutput>#Answer# Ok - connected;</cfoutput>
<cfelse>

<cfoutput>#Answer# Not connected;</cfoutput>
</cfif>
</cfform>
BTW, I have examples of this being done using .php and .asp. I need to do this using .cfm. I can post the either the .php or.asp code if it will be helpful in converting the function into a .cfm page.

Thanks Fernis.
That code allowed me to connect!
I have an error on the remote application, but I think thats due to the fact that I commented out the database connection and query strings. As I am mostly concerned with connection at this point, I just wanted to test that my cfm page will recognise the POST request and send the right answer, In this case
##Answer## Ok - connected;
That worked perfectly and the application received the ok to connect.
I can now use your code as a base to carry on with my database connection and update query.
I can't thank you enough. I wouldnt have figured that out in a million years of trial and error.
I knew it was simple though. I was over thinking it.
I do have one last question though... In the code you presented you have
<cfif structKeyExists(Form,"isConnectionAllowed") AND form.isConnectionAllowed EQ "yes">
Can you you explain this structKeyExists(Form,"isConnectionAllowed")
I have never seen this before. Why the Form followed by a comma? I am guessing you are asking if there is an element in the POST called "isConnectionAllowed". Is that correct? If so, do I not need to do that for each POST'ed element such as username, password, and each of the other fields that will be updated in the session?

HP Officejet 6600 e-All-in-One Wireless connection issue.

We are using the HP 6600 now for 6 months and sice a few weeks we have some issues with the printer.
situation:
1 - HP 6600 printer
1 - Wireless Router
3 - Computers connected to the router
What we did:
Updated the firmware
Manual IP
Put channel from router to 11
Put it closer to the router (1 meter instead of 3)
HP docter, everything is fine (if connection is lost, answer "No network connection to your device"
But all above is not the solution.
When the printer is offline we just switch it off and on and it will work again for a couple of hours. It looks that the connection is lost when it is going to sleep/hybernate.
Also one of my customers has exactly the same problem, also did all above and didnt fix anything. This question is for me quite urgent because i am going on holidays in 2 days, my father in LAW cannot work without the printer and is getting upset this all this.
Any advices?

Arjan_NL
If I understand you correctly the printers blue light is flashing and you cannot see your printer on the network. I recommend that you reset the network defaults to factory settings on the printer.
To reset the network defaults
-touch Setup Menu
-touch Network
-touch Restore Network Defaults
Then use the Wireless Setup Wizard to connect the printer to the network.
To run wireless setup
-touch Setup
-touch Network
-touch Wireless Setup Wizard
follow the on screen instructions to set the printer up on the network. You will need the WPA password or security key for the router to do this.
Follow the steps in this document Printer Does Not Maintain Wireless Connection to set a static IP address for the printer. This should help you maintain a better wireless connection.
Keep me posted and let me know if you need further assistance.
I worked on behalf of HP.

My FaceTime was working perfectly fine till a week back but now the calls don't connect on my macbook. how can i fix this

how can i get my facetime to start working again

Some of the Apple servers used for FaceTime are having issues...connections are inconsistent. For me, they have worked ok for connections to New York, but not to Dallas, unless I initiate the connection. Then all works fine.
Other users have had a lot of issues connecting...answer seems to be along the lines of try from each end to see if one works and not the other, or wait...Apple is saying a week or so for full resolution.

Connection to BI Answers

Similar Messages

Maybe you are looking for