Connectiviy Issue

I have a IQ504 Touchsmart desktop running Windows 7 64 bit. I am trying to sign on to a wireless network which has a Linksys E2000 router. I keep getting a low connectivity response after entering the Ssid and network password. The result is no Internet capability. My Hp printer hooked up to the same wireless network with no problem.

Please follow the instructions here in order and answer all questions in detail.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

L505 Laptop_network connectivity issue

L505 Laptop working great for last couple of years, until recent network issue...
L505 successfully connects to router, both wired and wirelessly, however, no Internet access.
Other devices in house (both wireless and wired) connect successfully to the Internet.
Using FING utility on L505, I can see other devices on my network, including my router at address xxx.xxx.xxx.001. However, I can not successfully PING any of them.
I did a Mcafee virus scan recently. That is the last thing I can remember doing before this problem started.
Help!?!?

Satellite L505D-LS5005
Maybe the Winsock settings? This applies to Windows 7 as well.
How to determine and to recover from Winsock2 corruption in Windows Server 2003, in Windows XP, and ...
And check out the various possibilities listed here.
Why can't I connect to the Internet?
-Jerry

Bluetooth connectivity issue - HP TouchSmart 23-d117a

I have hp envy23-d117a all-in-one computer. Everything was working fine but maybe I removed some default programs, which I never use. After that, the bluetooth connectivity issue came up. Computer was detecting devices but was unable to connect to any device. I did an online search and found that 3 drivers were outdated on my PC. Without thinking for a moment, I updated all those and after that the bluetooth stopped to pop up in the device manager. I downloaded the ralink bluetooth driver but even after that the computer could not find any device. I thought that a restart might help but after the restart, there was no bluetooth again in the device manager.

Hello Rock-hp,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that after some updates you are not able to see let alone use your Bluetooth on your HP ENVY 23-d117a TouchSmart All-in-One Desktop PC. I would like you to review and follow the steps set out in the HP Support document: Using Microsoft System Restore (Windows 8), which will walk you through the process of putting your computer back to the state it was in before the updates.
If the above did not work I am also providing you with the HP Support document: Using Recovery Manager to Restore Software and Drivers (Windows 8), which you can use to restore the original drivers that came with your computer. As these worked for you I think it is best if we put them back.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a wonderful day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

E-print wireless connectivity issues

I have recently purchased an e-print enabled printer (yesterday evening), and have not been able to get it to download any apps. I bought it specificly to print via Google's Cloud Print service. I am able to connect to my wifi access point (it's a Meraki Access Point hooked to a switch, which is hooked to the DSL modem). However, when I go to apps, I keep getting the message that there are problems connecting to the server.
Here is what I know:
I am able to connect to my access point with no issues.
The Wireless Network Test Report prints out that there are no issues. Everything listed has passed.
There are no firewalls enabled on both my access point and my DSL modem.
All other machines hooked to my access point are able to access the internet.
I am getting an internal IP address form my access point.
When I enter the Wireless Setup portion of the menu system, it states that I am not connected. When I repeat the process of connecting to my SSID, I get the same error.
Additonal information:
Product Name: HP Photosmart D110 All-in-One series.
OS: Not applicable, but Windows 7 64-bit
Error Message: On printer: "There is a problem connecting to the server. Press Retry to connect again, or OK to exit." The blue wireless light is also blinking.
No changes made, this is a brand new out-of-the-box printer.
If there are any additional pieces of information needed, please ask! I would like to have this working relativly soon (the next couple days). Thank you so much!
EDIT:
In case this helps, here is a screen shot of my event log for the printer on my access point.

Hi Oli
Does the info below on connecting to the network help?
https://h30495.www3.hp.com/help#eprint
Connect to the network
ePrint requires that the printer is connected to your home network and has direct Internet access. ePrint will not work if your printer is only connected via USB to your PC.
To connect to your home network via wireless or Ethernet (wired):
Wireless connection:
Use the Wireless Setup Wizard on your printer to connect to your wireless network. On most printers you can press the Wireless button on the printer display or on the printer front panel to access your network wireless settings.
This is how the wireless button appears:
Wired connection (not available on all printers):
Connect one end of an Ethernet cable to your router, and the other end to your printer. Note: If you do not have an Ethernet port on the rear of your printer, your printer does not support an Ethernet connection.
Web Services: Once your printer is connected to your network you need to ensure that Web Services are enabled to use Print Apps and ePrint.
Photosmart: Depending on the printer model, use the Enable Web Services option available under the Setup>Wireless>Web Services, or Setup>Web menus on the printer, or via the ePrint icon on the printer front panel home screen.
Officejet: Select the Setup>Web Services Setup option to enable Web Services. Ensure that both ePrint and Apps are turned 'ON' in Web Services setup.
LaserJet: Print a configuration page from your printer to locate the IP address. Open a Web browser and type the product IP address into the address line. The HP-embedded Web Server will open. Click the HP Web Services tab. Select the option to enable Web Services. When Web Services are enabled, ePrint information appears in the HP Embedded Web Server. Look for the e-mail address that is automatically assigned to the product. The product also prints an HP Web Services page that contains this e-mail address and instructions for using the service.
ePrint can be affected by problems with a router or Internet service provider. If you are having problems with ePrint and you believe your printer is properly connected to your home network, use a web browser on a computer that is attached to your home network to confirm that your home network is functioning properly and that Internet access is available.
For wireless connections, check the signal strength indicator on your printer to confirm that you have a strong signal. On some printers, signal strength is shown on the front panel display. On other printers, you may need to open the Setup > Wireless menu on the front panel display. In some cases, it may be necessary to move the printer closer to your router to retain a consistent connection or improve performance.
Some networks require a proxy setting to be configured on the printer to access the Internet. This can be done via the Embedded Web Server (EWS) of the printer or the printer's control panel, depending on the printer. Refer to the printer User Guide for more details on using EWS or configuring proxy settings.
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

WiFi Self-Signed SSL Hotspot Connectivity Issues Since 2.0.1.358 Update

Since upgrading one of our 64GB Playbooks to 2.0.1.358 I have been unable to fully connect to a wireless hotspot at a local hospital we work at. I believe the hospital uses Lucent access points. Once connected to the AP, users are redirected to https://1.1.1.1/login.html this page should allow them to type an email address and then click a button to gain full Internet access. Since the 2.0.1.358 upgrade redirecting to this secure page just throws SSL errors, most likely due to the self-signed cert that the AP is using to secure the http traffic. If you try to accept the error and install the cert nothing happens and you are repeatedly prompted to accept the cert until you get a 3RFINA error. I was able to use my laptop to save the public cert and then import it into the Playbook and now I get an SSL Connect Error.
My laptop and iPhone connect without issue.
Has anyone seen this before? Any ideas? Since the APs are not mine I am really looking for a client-side solution.
Thanks.

I have sent you a private message regarding your issue.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Network DAQ Connectivity Issue

Hello, I am having connectivity trouble with my NI cDAQ 9191, which is a network DAQ device.
The strange thing is that I can get it to work on one laptop, but not the client's laptop. Both laptops are actually the same model (HP Probook 5430s) running Windows 7. Here is a list of what my setup is:
Ad Hoc network provided by cDAQ9191, no security
Static IP address set on both ethernet and wireless settings on cDAQ 9191
LabVIEW executable built and tested on both computers, running the code attached continuously
Firewalls on both computer turned off
IPv4 settings on both laptops set to all automatic
Both computers connected to the ad-hoc network tried in all of the following configurations: one-by-one, both computers connected at the same time, with ethernet adapter disabled, with ethernet adapter enabled
The code works on both computers when connected via ethernet, but the problem exists when the client's computer is connected to the ad-hoc wifi network (which is unfortunately a requirement).
The specific occurance is that the code will connect successfully, but then timeout the connection in the False case and then not connect again until i reset the network adapter. This can be repeated over and over again.
Does anyone on here know of some other network settings I can tweak to try to get this to work?
Thank you for any advice that could help me solve this problem.
Best,
James
LabVIEW Professional 2014
Attachments:
Connect Network DAQ Device.png ‏21 KB

Sorry, I should have been more clear:
The 9191 is set to a static IP address "169.254.1.26" and the laptops have their IPv4 settings for the wifi adapter set to DHCP/automatic. This causes the laptops to adopt the subnet of the network to which they connect, and therefore the same subnet as the 9191. This works great on one laptop, but not the client's laptop.
I can connect to the ad-hoc network on the client's computer, and it stays connected, according to Windows. But the DAQmx network device connection disconnects right after connecting. The is not the case when I run the same executable on my computer, so I'm assuming it must be some difference between the laptops, most likely network setting related.
James
LabVIEW Professional 2014

Issues with data transfer / connectivity

Hi,
I bought a Curve 8320 last week and activated BIS. The issue that I am facing is:
- Mails do not get delivered and connectivity to the internet is lost even though the data signal (EDGE) is available. I can see an upload arrow flashing on the right top corner
- What I have noticed is that the connectivity gets resumed when I do any of the following:
a. Switch on WiFi (immediately the data connection starts receiving and sending messages and internet connectivity is resumed). Even after switching off the WiFi, it works fine
b. Switch off the device and restart
Can someone help me? Please let me know if you need any more details.
Thanks

You can try using FExplorer and using it to delete the file C:\system\shareddata\101ff93b.ini from the phone. It should reset the Data Transfer app.
FExplorer you can find here:
http://www.gosymbian.com

HP Photosmart D110 connectivity issue with Windows 8.1

Month back, i have upgraded my Dell inspiron to windows 8.1 and from that time onwards i am facing issues with connectiveity to HP photosmart D110 printer over my wireless network.
I installed the printer driver, once it is installed fine. i can see the printer, take out few prints. Then i shutdown my laptop. Next time i reboot. I launched HP Solution Center and turned on my printer. It showed up problem with with HP solution center saying " HP Solution Center can not run becuase your device installation is not complete" i have to the printer and devices setting on control panel i could see the printer but it is offline. I checked my connections with the printer. also ran the wireless network test. Everything comes fine.
To resolve the problem, i thought may be let me re-install. I finished reinstalling and then it worked fine. But every restart i faced the problem. I add the add the same printer again and again everytime using installation and reinstallation. This sucked. I googled and downloaded HP doctor software. That fixed the problem so far and i had to run the doctor connect the printer everytime.
Now even HP doctor is not working, it list all the multiple installation of the same printer and none of them gets connected. This is getting little crazy for me.
I need some advice, I appreicate your help in looking into it. If someone has some suggestion to deal with Windows 8.1 and have faced similar problem or can suggest some solution. I will be greatful.
Thanks,
AKS309

Hi,
When using "beta" version of any software (even with NEW full software), users have to accept the risk of some hardware do not proper functioning. Many HP test guys/girls may face this similar problem in their test lab(s), they may be able to find a solution OR push it back to Microsoft to fix the problem, therefore users (you and me) have to wait.
I woul remove/unistall its driver then start from beginning.
Hope this makes sense.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Mobileconfig issue with ipad

Hello everyone,
I am facing an issue with the usage of mobileconfig to push profiles into Ipad/Iphone. This has been tested with IOS 8.1(iPad) and 8.3(iPhone).
My profile has been generated manually(writing through apple key references) and then with the IPhone Config Utility, this profile works great with mac os X.x versions, tested on Snow Leopard, Maverick.
This profile is here to setup an EAP-TLS connection, with server authentication, client authentication and CA certificate inside the profile.
My connection is setup properly and I can connect on mac OS X as I said, but on iPad/iPhone after the profile installation, I get a screen to fill infos (login/pw) to connect to the network. As this is an EAP-TLS network I shouldn't have this, and I should have a choice of certificate(as my identity) if there were one thing to choose before the connection.
So now I fill the information for login/pw and it still impossible to click the button 'Connect'.
To have an idea this is how my "configured ssid" via the profile appear on the iPad/iPhone if I try to connected to it:
http://imgur.com/dUOENth
As you guessed 'Rejoindre = Connect'
I have been through multiple threads and cannot find the source of the issue.
My mobileconfig file is signed, my profile is trusted when installed as I ask to trust my newly pushed CA, I also try to install the CA before and then push the profile, same result.
Lastly, the configuration of EAP-TLS with manually installed certificate is working great, only the autoconfig by profile is not. The auto configuration by profile with PEAP is working fine also.
Here is my profile(I removed the content as some of the information are not supposed to be public, TestEAP = CA, svr = server authentication cert and antoine = client authentication cert):
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>PayloadContent</key>
<array>
<dict>
<key>AutoJoin</key>
<true/>
<key>EAPClientConfiguration</key>
<dict>
<key>AcceptEAPTypes</key>
<array>
<integer>13</integer>
</array>
<key>EAPFASTProvisionPAC</key>
<false/>
<key>EAPFASTProvisionPACAnonymously</key>
<false/>
<key>EAPFASTUsePAC</key>
<false/>
<key>PayloadCertificateAnchorUUID</key>
<array>
<string>41FDAD3B-4024-4ACF-AFB0-AE9462B586E4</string>
<string>C55E83E1-4C0D-4735-A158-FE05C83065E0</string>
</array>
<key>TLSTrustedServerNames</key>
<array>
<string>antoine.p12</string>
<string>svr</string>
</array>
</dict>
<key>EncryptionType</key>
<string>WPA</string>
<key>HIDDEN_NETWORK</key>
<false/>
<key>PayloadDescription</key>
<string>Configure les réglages de connectivité sans fil.</string>
<key>PayloadDisplayName</key>
<string>Wi-Fi (pf-aa-sec)</string>
<key>PayloadIdentifier</key>
<string>antoine2.wifi</string>
<key>PayloadOrganization</key>
<string></string>
<key>PayloadType</key>
<string>com.apple.wifi.managed</string>
<key>PayloadUUID</key>
<string>945A78A2-214F-4E85-B44D-50E8A5077D4E</string>
<key>PayloadVersion</key>
<integer>1</integer>
<key>ProxyType</key>
<string>None</string>
<key>SSID_STR</key>
<string>pf-aa-sec</string>
</dict>
<dict>
<key>PayloadCertificateFileName</key>
<string>srv.der</string>
<key>PayloadContent</key>
<data>
</data>
<key>PayloadDescription</key>
<string>Authentifie l’appareil (certificat ou identité).</string>
<key>PayloadDisplayName</key>
<string>svr</string>
<key>PayloadIdentifier</key>
<string>antoine2.reference1</string>
<key>PayloadOrganization</key>
<string></string>
<key>PayloadType</key>
<string>com.apple.security.pkcs1</string>
<key>PayloadUUID</key>
<string>41FDAD3B-4024-4ACF-AFB0-AE9462B586E4</string>
<key>PayloadVersion</key>
<integer>1</integer>
</dict>
<dict>
<key>PayloadCertificateFileName</key>
<string>TestEAP.der</string>
<key>PayloadContent</key>
<data>
</data>
<key>PayloadDescription</key>
<string>Authentifie l’appareil (certificat ou identité).</string>
<key>PayloadDisplayName</key>
<string>TestEAP</string>
<key>PayloadIdentifier</key>
<string>antoine2.reference2</string>
<key>PayloadOrganization</key>
<string></string>
<key>PayloadType</key>
<string>com.apple.security.root</string>
<key>PayloadUUID</key>
<string>C55E83E1-4C0D-4735-A158-FE05C83065E0</string>
<key>PayloadVersion</key>
<integer>1</integer>
</dict>
<dict>
<key>Password</key>
<string>qwer</string>
<key>PayloadCertificateFileName</key>
<string>antoine.p12</string>
<key>PayloadContent</key>
<data>
</data>
<key>PayloadDescription</key>
<string>Authentifie l’appareil (certificat ou identité).</string>
<key>PayloadDisplayName</key>
<string>antoine.p12</string>
<key>PayloadIdentifier</key>
<string>antoine2.reference</string>
<key>PayloadOrganization</key>
<string></string>
<key>PayloadType</key>
<string>com.apple.security.pkcs12</string>
<key>PayloadUUID</key>
<string>680D4DB3-6196-471D-95AF-6EA0A1B6AF58</string>
<key>PayloadVersion</key>
<integer>1</integer>
</dict>
</array>
<key>PayloadDescription</key>
<string>Description du profil.</string>
<key>PayloadDisplayName</key>
<string>antoine2</string>
<key>PayloadIdentifier</key>
<string>antoine2</string>
<key>PayloadOrganization</key>
<string></string>
<key>PayloadRemovalDisallowed</key>
<false/>
<key>PayloadType</key>
<string>Configuration</string>
<key>PayloadUUID</key>
<string>A1C6BF16-CE1A-4D64-B315-9DD72400E3C4</string>
<key>PayloadVersion</key>
<integer>1</integer>
</dict>
</plist>
Thanks for reading

Couldn't you use the free mdm -- meraki to generate the profile?
Meraki -- A free MDM   [ expect lots of email and phone calls about upgrades ]
   Read the product overview. Click on "get started now" to sign up.
     https://meraki.cisco.com/products/systems-manager/?ref=YZRzCR
   Video's on how to setup and use Meraki.
     https://meraki.cisco.com/blog/2012/08/how-to-get-the-most-from-meraki-systems-ma nager/

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

Pension issue Mid Month Leaving

Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
Ashwani

Dear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis              01/2010                    0.00           8,750.00
/139 VPF Basis              01/2010                    0.00           8,750.00
/3F1 Ee PF contribution     01/2010                    0.00           1,050.00
/3F3 Er PF contribution     01/2010                    0.00             509.00
/3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00
/3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25
/3FA PF basis for Ee contri 01/2010                    0.00           8,750.00
/3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
/3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
/3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
/3F4 Er Pension contributio 01/2010                    0.00             541.00
/3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
/3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
/3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
/3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
/3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
/3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
1BAS Basic Salary           01/2010                    0.00           8,750.00
RT table for year 2009. DOL 27.10.2009
                                                                                /111 EPF Basis              07/2009                    0.00           9,016.13
/139 VPF Basis              07/2009                    0.00           9,016.13
/3F1 Ee PF contribution     07/2009                    0.00           1,082.00
/3F3 Er PF contribution     07/2009                    0.00             628.00
/3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
/3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
/3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
/3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
/3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
/3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
/3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
/3FC Pension Basis for Er c 07/2009                    0.00           5,452.00
/3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
/3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
/3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13
1BAS Basic Salary           07/2009                    0.00           9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani

Open PO Analysis - BW report issue

Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM     DOC_ITEM      DOCTYPE     COMP_DEL
650000001       10     UB        X
650000001       20     UB        X
650000001       30     UB
650000001       40     UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampath

Hi Priya and Reddy
   Thanks for your response.
                     Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
                    I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
                   In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No.    Doc.No.                    Item              Processkey         Rocancel     Elikz
    41               6500000001            30                    11                            X           ---
    42               6500000001            30                    11                            ---           X
    43               6500000001            30                    10                            X           ---
    44               6500000001            30                    10                            ---         ---
(Here --- means blank)
Thanks and Regards
sampath

HP LaserJet Enterprise 600 M602 driver issue

Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
Anatoly

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Windows 7 displays error message when exiting +cursor issue

Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Doug

function(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel

Issue in Creation of Periodicals for Contracts in CRM7.0

Hello,
I have a requirement to create Contracts in CRM7.0 system.
And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
Good part is Contract Order gets created, but onlywith Header Details.
The issues i am facing --
1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
here what does 'Logical Key' field indicate? What should be passed here.
What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are - Partner, Product, terms/appointments, Status, LongTexts......
Any help/inputs would be appreciated.
Hope my problem is stated clearly ...
--Regards
Dedeepya

Hi Anu,
i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
Ensure that you are passing a correct entry in INPUT_FIELDS structure.
As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
You can preset your break-points at :-
1. FM - CRM_ORDER_MAINTAIN
2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
Regards
Dedeepya C

Connectivi​y Issue

Similar Messages

Maybe you are looking for

Connectiviy Issue