Control Cycle information missing in COR2
Hi experts !
I encountered an issue in all client about reservations update with control cycle values for alternative items.
We use alternative items in a standard manufacturing BOM. (Strategy 1; probability of usage 100 % and 0 % for the others). These alternative items are WM managed and the control cycle are properly maintained.
When we create the process order, reservation items are created for all items (even for items with a required quantity to 0 which are the ones with probability usage 0 %) in RESB.
When releasing the process order, when the system is reading the control cycl information, only the reservation items with a required quantity different from 0 are updated with the WM info : Staging ind. (BERKZ) , Warehouse No (LGNUM), Storage Type (LGTYP), Storage Bin (LGPLA)
I could not find any customizing functions to manage reservations and control cycles.
I looked for a SAP notes but could not find ant soving our issue.
Do you have any solution to our issue ?
Regards and many thanks for your help...
Philippe
Dear,
Please refer the OSS Note 1136321 - COMAC: Double Transfer Requirements in WM Material Staging
Or you can raise the issue to SAP in that case.
Regards,
R.Brahmankar
Similar Messages
-
PP/WM control cycle records
Our company is working to install SAP WM. I am looking for easy to use reporting to identify materials that are missing control cycle records, but have been allocated to a work center/operation.
Hi,
Try this table PKHD at SE16/SE11 . Create a query for the table so that you can get the information.
Regards, -
Issue in creation of control cycle
Dear Gurus,
During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
I compared control cycle in a different ECC system where source information is appearing.
How can make the screen appear in my ECC system.
Please find the screenshots.
Any pointers will be highly appreciated.
This thread is further to the threads in Production Planning and LE/WM Forum. I could not resolve the issue with the threads.
Hope that I will get any pointer in EWM forum.
http://scn.sap.com/thread/3609441
http://scn.sap.com/thread/3610822
With Regards,
MalayHello Malay,
Can first contact your ABAPer and ensure the bottom screen is not an Screen Enhancement?
If it is a some custom development, your ABAPer can help you on the logic behind it.
Else, Let us know.
Regards,
Sathish -
Issue during creation of control cycle
Dear Gurus,
During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
I compared control cycle in a different ECC system where source information is appearing.
How can make the screen appear in my ECC system.
Please find the screenshot.
Any pointers will be highly appreciated.
This thread is further to the thread in Production Planning Forum
http://scn.sap.com/thread/3609441
With Regards,
MalayManish,
I do not understand how this going to solve the issue because why we need both KANBAN and WM control cycles for one material withdrawal for production?
Br
KK -
Handling Unit Management and supply areas with WM/control cycles
Dear all,
has anyone come across the issue how to handle a replenishment process for production with supply area within WM and Handling Unit Management?
Normally a supply area is being staged via control cycles. in the supply area, all storage units get lost (standard functionality as far as I know). When we post the GI, the components will be taken out of the supply area, backflushing is not allowed as far as I know.
Now: what happens if HUM is switched on? Do we have to enter a HU for these GI's as well? Or does the supply area keep the information of the SU/HU? I want to avoid that the users have to tell the system the HU no. for every screw they take/consume...
Thanks & regards
ChristianHi,
(as already described,)
it is possible to use handling unit management together with lean
warehouse management. You activate handling unit management independent
from storage unit management (that is only possible in case of full-WM
as far as I know).
Only in case if storage location is full-WM- AND HU-managed the storage
unit management is always active and HU numbers are taken over as SU
numbers. In all other cases HUM and SUM are independent from each other
and number ranges must be set a way that they are not overlapping.
Regards,
Ely -
Hi team,
I was referring the below statement to understand the control cycle.
The Kanban Control Cycle business object is used to control the flow of information and material between the demand source and the supply source in a pull environment. It controls the material quantities in production. It defines a loop between demand source and the supply source for recurring replenishment.
In the above statement, it is mentioned that, it is linking the demand source and supply source. In SAP, how we are linking the the demand source and supply source?
While creating the supply area in PK05, we are providing the storage location. Is this supply source or demand source?
In SAP, where we are assigning the another source (supply / demand source)?
Regards
pskHello Mario,
Thank you very much for your detailed explanation on storage bin and container.
1. So, if the storage location is not WM managed, there will not be any storage bin. The storage location itself will act as a storage bin. Am i right?
You said that, Containers are the physical means in which materials are kept in this process. a container usually equals a KANBAN. Normally there are at least two (but can be more) containers in a control cycle.
2. We are using pallets to replanish the supply area storage locations (production store which is near to work center). So in this example, the pallets are called as "containers". Am i right?
Consider the below example:
3. In control cycle i have maintained the number of kanban as 4. As you said above, i need to maintain 4 containers. But i have only one field to maintain the container. How to maintain 4 containers in one field?
Thank you.
psk -
I've created a WM-PP Control cycle for Pick parts in HU- WM managed storage location and by releasing a production order I'm getting a message:
No WM relevant components exist (function not possible)
Message no. CO577
I've est-up everything from WM stand-point, I'm not sure what I'm missing, Can someone please help me
Thanks in advanceIssue Resolved, WM-PP Interface Config issue
-
Hi,
I want to use the following IDOCs to execute the KANBAN process in an external system.
Inbound SAP: CONF51 (for Kanban status)
Outbound SAP: PKHD5 (control cycle) + PKHD5 (kanban) information
How can I trigger that the outbound information is sent once a day?
Using a job I guess that is checking what happend the last day in table PKPS. I want to put in 2 fields different information from other tables. How can I do that?
What must be setup to sent out IDOC information from SAP?
I already setup for testing via WE19 the following and it worked:
- Partner system with the relevant outbound message types.
Cheers
MathiasHi,
I have the same requirement.Please tell me how to got it done -
Hello all!
I am trying to create a control cycle for Kanban in my test system. I have created replenishment strategy in Customizing for Kanban and this was transferred all to my test system. When I want to input the address for a vendor it says: Replenishment strategy in plant ... does not exist.
I suppose there must be a problem with my Replenishment strategy which I have created in Customizing for Kanban. I was not sure about what I need to specify. I have specified plant, type of Procurement:it is an external Procurement, working with Scheduling agreements, Order type - LP, GR - 101, Signal lock- 0. These are all information, which I have specified I was not sure about the rest.
Please could anyone help me ??Hi,
I answered to few of the threads, hope it will help you, if required any further info please let us know.
Re: Implementing KANBAN-WM
Re: Creation of control cycles for lean WH
thanks
Om -
BAPI /FM to create /change KANBAN control cycle
Hi
Is there any BAPI or FM to create or Change control cycle?
Thanks.Check
BAPI - BAPI_KANBANCC_ADDEVENTDRKANBAN
Short Text
Create Event-Driven KANBAN for Control Cycle
Functionality
With this method you can procure a material quantity for a control cycle. To procure this material quantity one or more kanbans are created in the control cycle and set to status EMPTY.
The essential entry parameters are:
o Control cycle (if the function module is called as a method for the object kanban control cycle, this parameter is not available, but given by the object.
o Material quantity
Information about the status change is issued.
COMMIT and ROLLBACK WORK: the function module does not carry out any COMMIT work. Command off. This must be ensured by the initiator after ending the function module. Each time the function module is called, a COMMIT WORK must take place. It is not permitted to call this FM several times and to post the result with a COMMIT WORK. If, during the process,
the FM comes across an error, in some cases the command ROLLBACK WORK wil be carried out. In these cases the kanban is either set to ERROR status, or in the parameter RETURN an error message is given.
Hope this helps.
Regards
Vinayak -
KANBAN control cycle pk01 error
Hi friends,
I am using SAP 5.0 and material is WM activated, getting error while creating control cycle in PK01.
Error -: Storage bin 002 / / does not exist {Message no. PK033}
Note-:it can be solved with PKMC but in SAP 5.0 Pkmc T-code is not available.
Regards
AmitHi,
Check in the material master for the material, whether you have maintained any fixed bin in WM2 for the storage type 150.
Thanks,
JK -
Hello all,
Can somebody please tell me how to find who created a particular control cycle?
Is there a way to find the id of the person who created/modified a control cycle?
If yes, please tell me.
Thanks and Regards,
Umakanth.Hi
Use Transaction AUT10 with T-codes PK01/PK02.
Give the period for which you want to find changes.
keep the changed by field open , i.e dont put your user id there.
and execute, you will get list of all changes done through creation or chage transaction of control cycle.
check it out and revert back for further discussion.
Hope it helps you.
regards
Ritesh -
Creation of control cycles for lean WH
Hi All,
Is it possible to create control cycles (backflush) for LWH, if so how?HI ,
There is one more way to create control cycle.
1. PK05 - create supply area ( earlier explained the procedure)
2. PKMC - enter plant - go to change mode ( click on change icon ) - in the right hand window - you can see the create / copy icon.
3.click on create icon
4.select option - classic Kanban or event driven kanban
5.enter material/ plant/ supply area.
6.enter no of kanban / qty.
7.In replenishment strategy - select appropiate option ( in our case it is stock transfer)
8.enter - the tab will change from replenishment strategy to stock transfer.
9.enter storage location.
10.enter destination- storage type- bin
11.enter if any additional data required to enter.
12. save- control cycle will get generated.
thanks
Om -
Control cycle for production staging SAP WM
We currently have control cycle for kanban purchase orders. Do I need to create new control cycle production staging. Actually I will be using fixed bin for production consumption. Kindly confirm whether existing control cycle of purchase order can be used.
Material Staging Indicator for Production Supply
The material staging indicator defines the method of how needed materials can be supplied for production with the assistance of the Warehouse Management system.
As with the location coordinates (warehouse number, storage type, and storage bin), the system files this indicator in the control cycle.
The following staging types are supported:
"1": Pick parts
These materials are picked according to the required quantity specified in the production order.
"2": Crate or kanban parts
These materials are always removed from the warehouse in full cases. These can be ordered, for example, as soon as a case of needed parts is emptied in production.
"3": Release order parts
Release order parts are scheduled individually and the quantities are supplied manually to replenishment storage bins based on the requirements of production orders and the stock levels in the scheduled production supply areas.
"4": Manual staging
Materials are staged manually. For example, you can transport individual components using manually created transfer orders, or you can use the bypass method to transport them directly from the goods receipt zone to production. In goods receipt posting, postings are made to the production storage bins from the control cycles.
"0": Not relevant to WM-PP
These materials are not relevant to WM staging. They cannot be requested using the WM system. -
Withholding tax information missing from line item
Hi Gurus,
We have created a vendor invoice in SAP. The voucher processed and paid has withholding tax of 1,333.00
But if you display the vendor invoice and click on the withholding tax data button, it says that withholding tax information missing from line item.
Kindly advise how could this happen when the vendor account has maintains withholding tax code and the payment document also has withholding tax information.
Thanks,
EllicecDear,
Please check the following:
1. The withholding tax types and indicators must be defined as Liable'.
Please check this via vender master data (fk02).
2.Please check field status group for withholding tax fields in
transactions OB14 (inserting the field status variant of the Company Code oby6 and the field status group of the g/l account that You can find running FS00) and OB41 (posting key, in DP case 29). Check the account group for the GL account
assigned to the vendor reconciliation account in FBKP.
These should be set as "optional".
Select group --> Taxes
Suppress Req. Entry Optional Entry
Withholding Tax Code X
Withholding Tax Amounts X
regards
Maybe you are looking for
-
Hi all, The BI content tab in RSA1 is missingin our system. What is the cause for this and what is the solution for the getting the tab. Thanks in advance
-
Description Faulting Application Path: C:\Program Files\Safari\Safari.exe Problem signature Problem Event Name: APPCRASH Application Name: Safari.exe Application Version: 5.34.57.2 Application Timestamp: 4f982b5e Fault Module Name:
-
Itunes wont open, but is running.
Alright. My problem is Itunes (Up to date) will not open. I click on the shortcut. and then it does not launch. but when i open task manager. It isnt in my applications, but it is in my processes. I have uninstalled everything as multiple forum fixes
-
Hi I have a BPM with a fork with 2 branches. It receives a sync request, post an async idoc and return response. Branch 1 - post Idoc, wait for transport acknowledgement and then map OK message back to sender Branch 2 - wait step (1 minute), map to t
-
Lightroom CC will not start up
Lightroom CC has been installed through the Cloud. When I click on it, I very briefly see a start up screen then it shuts down. I have LR 5 still on the computer but the instructions stated it would not be affected. Any ideas what this should be happ