Controller Issue? or Journaling issue?

Hello all
I've been having this weird problem with an Xserve RAID and a couple of servers. I've been narrowing down the problem but i want to get some outside input on the matter.
I have 3 Xserves, 2 connected to the Xserve RAID (DAS). The problem seems to happen at random, but always starts with the same xserve. The problem seems to be a hardware issue, form what i can see in the logs, the tricky part is identifying the piece of hardware responsible. Here are all the clues i've been gathering:
Problem starts with
kernel[0]: jnl: disk0s3: flushing fs disk buffer returned 0x5
Sometimes followed by
kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 0 error 89 reqID 1 flags 0x9 afpCmd 15 so 0x1006ecc0
And then the horrible
kernel[0]: disk0s3: I/O error.
kernel[0]: jnl: disk0s3: dojnlio: strategy err 0x5
kernel[0]: jnl: disk0s3: writejournalheader: error writing the journal header!
kernel[0]: disk0s3: I/O error.
The inevitable screams from the services that depend on that volume follow
imap[3899]: IOERROR: opening /Volumes/Userdata/spool/imap/user/jcarrillo/cyrus.header: Input/output error
This causes AFP to stop and also imapd, both of which have their working directories within that volume. These are disks 8-13 in one hfs+ journaled volume in the raid.
At first we thought the HBA's were the ones misbehaving, but after swapping slots and swapping servers, the same server is the one failing us.
This error doesn't make the server unresponsive, only processes or actions that involve reading the volume, hang, that includes a simple ls in /Volumes or diskutil.
We've already fsck both disks with no red flags. Here's the diskutil list
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: Applepartitionscheme *2.3 Ti disk0
1: Applepartitionmap 64.0 Ki disk0s1
2: Apple_HFS Userdata 2.3 Ti disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *76.3 Gi disk1
1: EFI 200.0 Mi disk1s1
2: Apple_HFS hd 76.0 Gi disk1s2
I will be performing the Apple Xserve Diagnostics later tomorrow to discard server side hardware, but i am inclining towards a raid controller malfunction. Anyone seen something similar?
AFAIK there is no xserve raid diagnostics from apple, is there a third party tool? Or is it just a replace component thing and hope for the best?
Anything to help me be sure to blame the controller will be greatly appreciated.

You're only reporting logs from the host system. What about the logs on the RAID itself?
This sounds to me like a problematic array - possibly caused by a faulty disk. RAID Admin should give you some insight as to whether that's the case or not.

Similar Messages

HELP! Mac Mini Server Journaling issue during reinstall

H E L P !
Mac Mini Server Journaling issue...
Hi there,
I have taken on a nearly new Mac Mini Server running Snow Leopard.
It has a RAID set up already.
When I try to reinstall the OS from the original disk the installation willl not let me select the drive as it says it is not journaled.
I have then opened Disk Utility and selected the main HD (there is one HD plus 2 Raid slices listed).
From this point on there are no options available:
The only 2 tabs above the right hand window are 'First Aid' and 'RAID'.
First Aid shows all 4 options greyed out.
Selecting the main HD and then going to File>Enable Journaling will not work as 'Enable Journaling' is greyed out.
Deleting the RAID does not work either, as the HD (mirrored RAID set) and both RAID sclices have the padlock icon next to them.
Can anyone help?
I really need to reinstall the OS and set the machine up with a TimeMachine Capsule asap!
Many thanks,
Haberdashery

Sorted!
All is good now : )

SD Card Issues and Sound Issues

Hello all,
I bought my Xperia Z2 probably 2-3 months ago and I have to say I do love this phone.
However I have come across a few issues that seems to be, not so common as I cannot find any solutions online (Which is why I'm here).
I am having 2 issues:
1st Issue:
SD Card Issue, this is a funny one as I have not been able to identify what actually causes this issue. Now this all started (or when I started to realise the issue) when I changed some settings in the Camera App. I saw that it was saving photos to "Internal Storage" and since I specifically bought a new SD card for the Xperia Z2, I wanted to store photos on the SD card instead.
So I changed it to SD Card Storage and all is well (At least, that is what I thought).
After taking some photos one day, I got home and wanted to preview them, in the photos app and Album (Sony's Photo Previewer) it shows that the photo is corrupted or missing (Depending on which app I'm using). This really annoyed me as the photos I took seems to be all lost and corrupted. So I tried to use a file explorer (Including File Commander) to find the actual file and open it, but it seems to have the same problem. I get this grey background with a picture of a mountain with like a thunderbolt sign (Broken sign).
Following this, I have also tried to copy some video files onto the SD card and it has been giving me troubles too. I tried to copy videos onto the SD card in 2 ways, first way is to take the SD card out, connect it to a SD card reader and plug that into the computer. After it finished copying onto the SD card, the files would just disappear (I use computers a lot and this was very surprising and new to me... It's like the SD card deleted the files right after it was copied, or maybe even 'hid' the files).
So since that method didn't work I thought I would try putting the SD card back into the phone and connect the phone to the computer then use Sony's MediaGO (Computer App) to transfer the videos and it sort of worked this time. I copied 14 videos over and only the first 2 videos are working, the others are all "Media is missing" or of some sort. I checked the video's format and they are all either .avi or .mp4 which I don't think is a problem as the first 2 videos are in .avi so surely other .avi videos would work too? Guess not...
So it seems like I am having troubles with Video and Photos on the SD card as music is working 100% fine. Used Media GO to copy the music on and it's all working wonderfully.
Some of you might suggest formatting the SD Card, I will say I have... I have tried the above methods before formatting AND after formatting (Formatting using Xperia Z2, or shall I say "erase").
The SD card I have is Sandisk's 64GB Ultra (I bought this to anticipate 4K or at least 1080p video recordings).
If the issue here is SD Card compatibility and I was silly enough to not have seen that prior, then I would gladly admit it's my fault and be happy that the solution would simply mean to buy another SD card.
But that said, I highly doubt that would be the issue due to the fact that the SD card is made for performance (Not the best performance as the Extreme and Extreme Pro range are a lot better) and the card is new.
2nd Issue:
Now this issue is not as bad as the first issue, it's something to do with the sound. I understand the phone has 3 sound controls, one for the Ringtone for when you get a notification or/and phone call, one for Media and one for Alarm.
What I do is I have the Ringtone volume sitting at around 50% and Media will be dependent as I change it when I open an app but the issue I've been having is this:
If I open an app (Mainly games that has sound/music) and I change the Media volume to say 70% or even 20%, whenever I get a notification whilst in-app the notification volume seems to be at 100% no matter what I do with the media volume. This is weird as my default Ringtone/Notification volume is sitting very low at around 50% or even if I change it to 20%.
What am I missing here? Any thoughts?
With the above 2 issues, last resort would be to factory reset my phone but will be willing to do it if there's a high chance of the issue getting fixed.
Your thoughts will be greatly received as right now I'm just lost and not sure what to do with the issues. I'm slowly getting the feeling that I should just give up on the phone and use it for phone calls, music and forget about the whole photo/video taking which is very sad as I love the phone's photo/video taking features.
Solved!
Go to Solution.

Hello Rickard,
Thank you for the link, I have started the test and 10 minutes into the test the speed for writing dropped. Anyways I only managed to get through in writing 8GB of data then I gave up. I then started to verify that 8GB of data that was written on the SD Card.
I have to say, it does seem like that SD Card is defective
Thank you for providing the link, what I will do now is get another SD Card and see if the problem is still there.
If the problem goes away I would consider my 1st issue being solved
However I am still not sure about my 2nd issue as this is not related to the SD card. Even without the SD card in the phone I seem to be experiencing this problem.
It's frustrating sometimes as if I'm trying to keep the volume down and play a game I can't because any notifications that comes through will be at 100% volume.
Perhaps there's a setting I'm missing?
Your help would be greatly appreciated.

How to enable "Billing Document- Issue Output To- Issue output to" in VF03

Plz let me know how to Enable "Billing Document --> Issue Output To --> Issue output to" in the VF03 transaction (2nd screen).
After entering the billing doc no. n then pressing enter items will be displayed. Then in the menu bar under "Billing Document" there will be "Issue Output To" option will be there.
Under that again " Issue Output To " & " Screen" options will be there, which by default displayed in disable mode. Is there any option to enable them.

Hi
U need to customize a message type for the billing by trx NACE

Installed Yosemite: now can't save any files / ID, Ai, PS. Is this an Adobe issue or Apple issue?

Installed Yosemite: now can't save any files / ID, Ai, PS. Is this an Adobe issue or Apple issue?

I am still on Mavericks and was going to update to Yosemite, but am scared that if I do that I will lose my programs. I am following your question and I really hope that this works out for the both of us. Good Luck!!!

Browser usually crashes whenever I want to upload a Word or PDF file? is that an OS issue or compatible issue with Word for Mac

A lot of times I would have to reset Safari while I do this and then it might work afterwards, I just find it annoying and time consuming, sometimes I might have to reboot my machine as well. Not sure whether it's an OS issue or an issue with Word that the system doesn't like word too much. I get the spinning ball and I have to do a hard force quit using my keyboard in order to stop the browser when it stops responding, then go ahead and reset safari like I stated previously.

I have tried Opera, which is somewhat better but it crashes if I have to look for the file within the system like with Safari, it will by default look on the desktop, if I try to change it to documents for example that's when it can go crazy, with Opera it will by default open in documents but say if I wanted to change it to desktop to look for the file, it can go loopy. Looks like it either the browser or OS doesn't like changing different folders to upload files.
How's Firefox on a Mac? is it better than on Windows?

What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was when I was online ,but have to start games over.

What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was when I was online ,but have to start games over.

The original iPad has a slow processor and only 256 MB of memory so it often runs into low-memory failures.
Double click the home button and dismiss all of the recents - I do that weekly.
Then reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider - I also do that weekly.
Both seem to help to reduce the low-memory faults that occur.

Issue within Journal Entry

Dear all,
I am working in Oracle R12.1.1. Now I have transfered the Payable Accounting to G/L but when I open the concern Journal Entry in the G/L, I observe that Drilldown button is disabled.
May I know the reason for it.
Is there any Profile to be attached. so that this drilldown button is enabled.
Hence through this drilldown functionality i can see the transactions coming from feeder (Subledger) Module.
Regards
Hitesh Parsawala

Check the following links and the data looks fine.
http://www.orafaq.com/node/2242
http://www.orafaq.com/node/2250
By
Vamsi

App Controller and SCVMM connection issue

I have configured private cloud and installed the SCVMM server and App Controller Server separately.
When I am trying to add the VMM server to App Controller,
I am getting the following error.
Category: Critical
Description: Connection attempt to the target system failed.
Details: Category: Critical
Message: 1604–ConnectServerAuthenticationFailed
Description: You cannot access VMM management server scvmm.corp.usl.in.
Details: Category: Critical
Message: System.ServiceModel.Security.SecurityNegotiationException
Description: A call to SSPI failed, see inner exception.
Category: Critical
Message: System.Security.Authentication.AuthenticationException
Description: A call to SSPI failed, see inner exception.
Category: Critical
Message: System.ComponentModel.Win32Exception
Description: The target principal name is incorrect
Regards
FBM

Hi,
I am configuring a private cloud. I have installed the SCVMM server and App Controller Server separately.
When I am trying to add the VMM server to App Controller, I am getting the following error.
Category: Critical
Description: Connection attempt to the target system failed.
Details: Category: Critical
Message: 1604–ConnectServerAuthenticationFailed
Description: You cannot access VMM management server scvmm.corp.usl.in.
Details: Category: Critical
Message: System.ServiceModel.Security.SecurityNegotiationException
Description: A call to SSPI failed, see inner exception.
Category: Critical
Message: System.Security.Authentication.AuthenticationException
Description: A call to SSPI failed, see inner exception.
Category: Critical
Message: System.ComponentModel.Win32Exception
Description: The target principal name is incorrect
Thanks and Regards, Mukesh. This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click
“Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Controller T3 Line Code Issue

Controller T3 is set to M23 B8ZS, but port xmt'g D4? DACS is ESF THRU...
Is there another setting I am missing? We have other interfaces on the router working fine, I have verified and matched the configs between the two.

I did, and here's the info...
SXFLSDTU91W-R-010K-01#show controllers t3 6/0/0.1
T3 6/0/0.1 is up. Hardware is C10K CHSTM1 line card
Applique type is Channelized T3
Controller is in channelized mode
No alarms detected.
Framing is M23 (Configured)
Line Code is B3ZS, Clock Source is Internal
equipment customer loopback
T1 24 is up
timeslots: 1-24
FDL per AT&T 54016 spec.
No alarms detected.
Framing is ESF, Clock Source is Line
It's up, but XNT'G D4?

Promise controller acting strange, known issue?

at this point, i tracked all of my problems down to my promise controller..
while my hd's are on the promise controller, raid0, no go on the win2k install, and strange things with xp, like slow datatransfer..
but there are loads and loads more strange problems.
now i've connected my s-ata hd's to the via controller, using softwre raid0, but no problems anymore..
is it a known problem with the promise controllers?

Hi fboecom
Yes, you need Via IDE ( PATA IDE) enabled otherwise your CDs and IDE HDDs won't function.
To use Via SATA, the S ATA IDE needs enabled for SATA1 and 2.
I see I am going to have to do some work on the promise, it may well be the IDE3 connector works, except for optical drives. Ser1 & Ser2, I have had working in conjunction with the Via. But that was when originally trying to set up the Maxtors. I think I may have had the promise either disabled or on SATA. I will be ordering stock this week, so I will get another SATA drive and see just what works.
By the time you buy another disk next year, Promise will have rewritten their drivers, they will have to for new MS systems in pipeline, plus new 939 pin chips coming soon and Mobos to match.
Read this link, if you want to see how Merlinen got, is it 10 HDDs to run, I#m still thinking about his next advance.
https://forum-en.msi.com/index.php?threadid=44351&sid=
Enjoy
jocko

Forest Trust Issues (Group Membership Issues)

OK - this is going to be long. I hope I am detailed enough.
Four domains, each in their own forests:
domain.w.com
domain.x.com
domain.y.com
domain.z.com
For the sake of everyone, I'll refer to each domain as "w" or "x", which would be domain.w.com and domain.x.com, respectively.
Domains x, y, and z all have users that require access to resources on domain
w. Remember - each domain is in its own forest.
Three trusts were created on domain w. Since the users on domain w do not need any resources on the other domains, three "ONE-WAY:OUTGOING" trusts were created (one for each) via Active Directory Domains and
Trusts on domain w. The option to create the trust (have it show up in Active Directory Domains and Trusts) in the other domains (in this case
x, y, and z) was selected.
After the trusts were created from domain w, the trusts were verified. Administrators on domain
w could "verify" the trusts (using admin accounts created for them on the three trusted domains).
Since everything looked good (domain w shows up as an incoming trust for the other three domains), permissions for specific users on domains
x, y, and z were granted for a share in domain
w.
Only... that didn't happen. When attempting to change permissions on the share, administrators were able to change the working domain directory to either
x, y, or z... but searching returned zero results. Zilch.
*It should be noted that this scenario has been in place for quite some time now, and that all groups/users previously defined on the share (that belong to the three domains trusted by domain
w) now all show up as SIDs.
When attempting to verify (validate) the incoming trust on any of the three domains, the error "Windows cannot find an Active Directory Domain Controller for the domain.w.com domain. Verify that an AD DC is available and then try again."
is returned.
Pinging domain.w.com returns the correct address. Direct pings to both domain controllers on domain w
is also working. Domain w can also do the same pings that I just listed to all three other domains with correct results.
There is no firewall in between these forests.
I am leaning towards a DNS or AD issue on the domain w side. This all occurred at once on the same day last week, and no changes were made on
x, y, or z. Of course... domain
w is another entity and they are saying they have no clue why its not working.
Questions:
Should I be able to verify the trust from x, y, or
z to domain w?
Why cant domain w see the users/groups in the other domains?
Why does domain w validate the trust if the other three domains cant?
Could this be caused by some setting in GPO having to do with LDAP security, signing requirements, or authentication settings?
Any help is much appreciated.
Chris

Yes, this is related to DNS, from what you describe.
The simplest way to configure this is to go to EACH dns server on both sides of the trust and configure it for a conditional forwarder of the others dns zone.
http://www.techrepublic.com/blog/windows-and-office/configuring-dns-forwarders-to-support-windows-server-2003-forest-trusts/501/
Unless you have a root dns server for all four zones already.
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

MGCP PRI - UpDown logs difference between Telco Issue and Network issue

Hi,
Setup is remote site MGCP Gateway and CUCM is on HQ. I'm suspecting the below logs and what caused its flap but not 100% sure, is this correct?
Logs caused by connection to Telco
021987: Jan 14 18:15:45.708: %CONTROLLER-5-UPDOWN: Controller E1 0/3/0, changed state to down (AIS detected)
021988: Jan 14 18:15:45.712: %CONTROLLER-5-UPDOWN: Controller E1 0/3/1, changed state to down (AIS detected)
021989: Jan 14 18:15:46.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/0, changed state to down (AIS detected)
021990: Jan 14 18:15:46.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/1, changed state to down (AIS detected)
021991: Jan 14 18:15:46.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/2, changed state to down (AIS detected)
021992: Jan 14 18:15:46.696: %CONTROLLER-5-UPDOWN: Controller E1 0/2/3, changed state to down (AIS detected)
021993: Jan 14 18:15:46.912: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/2/0
021994: Jan 14 18:15:47.708: %LINK-3-UPDOWN: Interface Serial0/3/0:15, changed state to down
021995: Jan 14 18:15:47.712: %LINK-3-UPDOWN: Interface Serial0/3/1:15, changed state to down
021996: Jan 14 18:15:48.692: %LINK-3-UPDOWN: Interface Serial0/2/1:15, changed state to down
021997: Jan 14 18:15:48.696: %LINK-3-UPDOWN: Interface Serial0/2/2:15, changed state to down
021998: Jan 14 18:15:48.696: %LINK-3-UPDOWN: Interface Serial0/2/3:15, changed state to down
021999: Jan 14 18:15:49.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/0, changed state to up
022000: Jan 14 18:15:49.700: %CONTROLLER-5-UPDOWN: Controller E1 0/2/1, changed state to up
022001: Jan 14 18:15:49.708: %CONTROLLER-5-UPDOWN: Controller E1 0/2/3, changed state to up
022002: Jan 14 18:15:51.700: %LINK-3-UPDOWN: Interface Serial0/2/1:15, changed state to up
022003: Jan 14 18:15:51.708: %LINK-3-UPDOWN: Interface Serial0/2/3:15, changed state to up
022004: Jan 14 18:15:52.164: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/2/0
022005: Jan 14 18:15:53.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/2, changed state to up
022006: Jan 14 18:15:53.708: %CONTROLLER-5-UPDOWN: Controller E1 0/3/0, changed state to up
022007: Jan 14 18:15:53.716: %CONTROLLER-5-UPDOWN: Controller E1 0/3/1, changed state to up
022008: Jan 14 18:15:55.692: %LINK-3-UPDOWN: Interface Serial0/2/2:15, changed state to up
022009: Jan 14 18:15:55.708: %LINK-3-UPDOWN: Interface Serial0/3/0:15, changed state to up
022010: Jan 14 18:15:55.716: %LINK-3-UPDOWN: Interface Serial0/3/1:15, changed state to up
Logs caused by network connectivity issue between CUCM and MGCP Gateway
021869: Jan 7 10:05:00.763: %LINK-5-CHANGED: Interface Serial0/2/2:15, changed state to administratively down
021870: Jan 7 10:05:01.371: %SYS-5-CONFIG_I: Configured from console by console
021871: Jan 7 10:05:02.575: %SYS-5-CONFIG_I: Configured from console by console
021872: Jan 7 10:05:02.667: %LINK-5-CHANGED: Interface Serial0/2/3:15, changed state to administratively down
021873: Jan 7 10:05:03.275: %SYS-5-CONFIG_I: Configured from console by console
021874: Jan 7 10:05:04.479: %SYS-5-CONFIG_I: Configured from console by console
021875: Jan 7 10:05:04.571: %LINK-5-CHANGED: Interface Serial0/3/0:15, changed state to administratively down
021876: Jan 7 10:05:05.179: %SYS-5-CONFIG_I: Configured from console by console
021877: Jan 7 10:05:06.475: %LINK-5-CHANGED: Interface Serial0/3/1:15, changed state to administratively down
021878: Jan 7 10:05:08.391: %SYS-5-CONFIG_I: Configured from console by console
021879: Jan 7 10:05:09.603: %SYS-5-CONFIG_I: Configured from console by console
021880: Jan 7 10:05:10.815: %SYS-5-CONFIG_I: Configured from console by console
021881: Jan 7 10:05:11.591: %LINK-3-UPDOWN: Interface Serial0/2/1:15, changed state to up
021882: Jan 7 10:05:12.027: %SYS-5-CONFIG_I: Configured from console by console
021883: Jan 7 10:05:12.803: %LINK-3-UPDOWN: Interface Serial0/2/2:15, changed state to up
021884: Jan 7 10:05:13.239: %SYS-5-CONFIG_I: Configured from console by console
021885: Jan 7 10:05:14.015: %LINK-3-UPDOWN: Interface Serial0/2/3:15, changed state to up
021886: Jan 7 10:05:14.451: %SYS-5-CONFIG_I: Configured from console by console
021887: Jan 7 10:05:15.227: %LINK-3-UPDOWN: Interface Serial0/3/0:15, changed state to up
021888: Jan 7 10:05:16.439: %LINK-3-UPDOWN: Interface Serial0/3/1:15, changed state to up
021889: Jan 7 10:05:39.379: %SYS-5-CONFIG_I: Configured from console by console
021890: Jan 7 10:05:40.079: %SYS-5-CONFIG_I: Configured from console by console
021891: Jan 7 10:05:41.783: %SYS-5-CONFIG_I: Configured from console by console
021892: Jan 7 10:05:42.483: %SYS-5-CONFIG_I: Configured from console by console
021893: Jan 7 10:05:43.779: %LINK-5-CHANGED: Interface Serial0/2/1:15, changed state to administratively down
021894: Jan 7 10:05:44.187: %SYS-5-CONFIG_I: Configured from console by console
021895: Jan 7 10:05:44.887: %SYS-5-CONFIG_I: Configured from console by console
021896: Jan 7 10:05:46.183: %LINK-5-CHANGED: Interface Serial0/2/2:15, changed state to administratively down
021897: Jan 7 10:05:46.591: %SYS-5-CONFIG_I: Configured from console by console
021898: Jan 7 10:05:47.291: %SYS-5-CONFIG_I: Configured from console by console
021899: Jan 7 10:05:48.587: %LINK-5-CHANGED: Interface Serial0/2/3:15, changed state to administratively down
021900: Jan 7 10:05:48.995: %SYS-5-CONFIG_I: Configured from console by console
021901: Jan 7 10:05:49.695: %SYS-5-CONFIG_I: Configured from console by console
021902: Jan 7 10:05:50.991: %LINK-5-CHANGED: Interface Serial0/3/0:15, changed state to administratively down
021903: Jan 7 10:05:51.399: %SYS-5-CONFIG_I: Configured from console by console
021904: Jan 7 10:05:52.099: %SYS-5-CONFIG_I: Configured from console by console
021905: Jan 7 10:05:53.395: %LINK-5-CHANGED: Interface Serial0/3/1:15, changed state to administratively down
021906: Jan 7 10:05:55.811: %SYS-5-CONFIG_I: Configured from console by console
021907: Jan 7 10:05:57.023: %SYS-5-CONFIG_I: Configured from console by console
021908: Jan 7 10:05:58.235: %SYS-5-CONFIG_I: Configured from console by console
021909: Jan 7 10:05:59.011: %LINK-3-UPDOWN: Interface Serial0/2/1:15, changed state to up
021910: Jan 7 10:05:59.447: %SYS-5-CONFIG_I: Configured from console by console
021911: Jan 7 10:06:00.223: %LINK-3-UPDOWN: Interface Serial0/2/2:15, changed state to up
021912: Jan 7 10:06:00.659: %SYS-5-CONFIG_I: Configured from console by console
021913: Jan 7 10:06:01.435: %LINK-3-UPDOWN: Interface Serial0/2/3:15, changed state to up
021914: Jan 7 10:06:01.871: %SYS-5-CONFIG_I: Configured from console by console
021915: Jan 7 10:06:02.647: %LINK-3-UPDOWN: Interface Serial0/3/0:15, changed state to up
021916: Jan 7 10:06:03.859: %LINK-3-UPDOWN: Interface Serial0/3/1:15, changed state to up
thanks in advance!!

Here it is.. what is it you're looking for? i'm suspecting the above difference between %LINK-5-CHANGED (network issue) vs %LINK-3-UPDOWN (telco issue)
E1 0/2/0 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (71 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
     0 Line Code Violations, 330 Path Code Violations,
     0 Slip Secs, 6 Fr Loss Secs, 0 Line Err Secs, 1 Degraded Mins,
     7 Errored Secs, 5 Bursty Err Secs, 2 Severely Err Secs, 2147417995 Unavail Secs
E1 0/2/1 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (72 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
     0 Line Code Violations, 314 Path Code Violations,
     0 Slip Secs, 5 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     8 Errored Secs, 6 Bursty Err Secs, 2 Severely Err Secs, 2147418015 Unavail Secs
E1 0/2/2 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (75 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
     0 Line Code Violations, 344 Path Code Violations,
     0 Slip Secs, 12 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     16 Errored Secs, 4 Bursty Err Secs, 5 Severely Err Secs, 2147418015 Unavail Secs
E1 0/2/3 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (103 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
     0 Line Code Violations, 448 Path Code Violations,
     0 Slip Secs, 5 Fr Loss Secs, 0 Line Err Secs, 1 Degraded Mins,
     7 Errored Secs, 5 Bursty Err Secs, 2 Severely Err Secs, 2147418002 Unavail Secs
E1 0/3/0 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (104 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
     0 Line Code Violations, 299 Path Code Violations,
     0 Slip Secs, 8 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     11 Errored Secs, 5 Bursty Err Secs, 0 Severely Err Secs, 2147418017 Unavail Secs

FPS / Stuttering Issues (Overheat , Speedstep Issues ? ) MSI GE60 2PE APACHE PRO

**EDIT**
Unable to post direct image links , please ad HTTP:// before links
Good evening Fellow Gamers and Adepts.
I come to you tonight with a serious doubt , which has rattled me for a while , and after some intense troubleshooting i have came up blank.
Here's the deal , as stated , i have a MSI GE60 2PE apache Pro
Now , playing cs go has been the bane of my existence, i am aware there are heating issues with this laptop , but those have been fixed by a Thermal repaste, a cooling pad and the backplate removed.
Now i have no more throttling of CPU , and GPU appears to handle fine aswell; the thing is i keep having MASSIVE lag spikes in CS:GO , and apparently they are being cause by CPU issues.
Image for clarification .
(Standart situation , notice the relative low fps for a old game)
imgur.com/cJ2Ly80
After a few seconds the following occurs
imgur.com/cJ2Ly80,27y1P5C,aq30R4r#1
Notice the fps drop and the CPU frequency percent alert in game
another shot of this in console so you can see the several occurrences
imgur.com/cJ2Ly80,27y1P5C,aq30R4r#2
now keep in mind that these are the lowest game settings, in Fullscreen windowed mode , if i even CONSIDER putting it on standart fullscreen i get unplayable jitterness and fps that range from 10 to 80 , all in a second.
Now , as i have stated i have fooled around and disabled speedstep in the bios , meaning that the cpu is always at 100%, seeing i have removed the backplate , throttling is not an issue as IXT (Intel extreme tuning) can attest.
note aswell the "active core count" spikes to 4/3 in the exact moments of the stutters, meaning that both problems should , in theory , be connected .
Image for reference:
gyazo.com/e1257716681828d38213bcc0e5fa71bc
Details of IXT
gyazo.com/1f03a344b9ac2642b1a885ee0a8ea078
can ANYONE give me an ideia of whats going on ? i rather enjoy playing with games with friends , but this is driving me up the wall..
Lastest NVIDIA / Laptop drivers installed ; Bios Updated and EC firmware aswell.
Thank you for your time guys x)

New Look BT Vision box - issues or no issues

(CL's/Mods/Admin - Please keep this thread separate)
If you are having any issues or indeed no issues, could you please add to this thread. Thanks.
If it is an issue with upgrading, then refer to this link - Problems installing the New Look BT Vision software update
To find the information needed -
Click the BT Vision button on your remote
Scroll down (4 times) to Help & Settings, scroll right (once), then down (2 button presses or until the settings page is displayed), scroll to the System Information tab and press Select
for example, LesC's and mine are currently:
Middleware Version Number: 4.64.9 rev 1 512 Build: 228900 Dec 6 2012
Application Version Number: 2.37.27 1211301730
Bootloader 2.4.0 | Pace_DiT7831_05_2B
Firepool's:
Middleware Version Number: 4.64.9 rev 1 512 Build: 228900 Dec 6 2012
Application Version Number: 2.37.27 1211301730
BootLoader 2.5.0 | Pace_Dit7431_05_2
borris12's:
Middleware Version Number: 4.64.9 rev 1 512 Build: 228900 Dec 6 2012
Application Version Number: 2.37.27 1211301730
BootLoader 2.5.0 | Pace_DiT7832_05_2B
StuartRogerson's:
Middleware Version Number: 4.64.9 rev 1 512 Build: 228900 Dec 6 2012
Application Version Number: 2.37.27 1211301730
BootLoader 2.3.0 | Pace_DiT7831_05
DonDino's:
Middleware Version Number: 4.64.9 rev 1 512 Build: 228900 Dec 6 2012
Application Version Number: 2.37.27 1211301730
Bootloader 2.5.0 | Pace_DiT7431_05_2
PottyPerson's:
Middleware Version Number: 4.64.9 rev 1 256 Build: 228900 Dec 6 2012
Application Version Number: 2.37.27 1211301730
Bootloader 2.5.0 | Pace_DiT7431_05_1
AQ's:
Middleware Version Number: 4.64.9 rev 1 512 Build: 228900 Dec 6 2012
Application Version Number: 2.37.27 1211301730
BootLoader 2.3.0 | Pace_DiT7831_05_2
PaulC's:
Middleware Version Number: 4.64.9 rev 1 512 Build: 228900 Dec 6 2012
Application Version Number: 2.37.27 1211301730
Bootloader 2.5.0 | Pace_DiT7431_05_2
Timrowlands:
Middleware Version Number 4.64.9 rev. 1 256 Build 228901 Dec 6 2012
Application Version Number: 2.37.27 1211301730
Bootloader 2.5.0 | Pace_DiT7431_05_1
RobbieF's:
Middleware Version Number 4.64.9 rev.1 512 Build228900 Dec 6 2012
Application Version Number: 2.37.27 1211301730
Bootloader 2.5.0 | Pace_DiT7431_05_3
So far:
Pace_DiT7431_05_1
PP (no issues)
Tim (issues see his post below)
Pace_DiT7431_05_2
firepool (no issues)
DonDino (random reboot every 2 weeks(ish))
PaulC (no issues)
Pace_DiT7431_05_3
Robbie (no issues)
Pace_DiT7831_05
Stu (no issues)
Pace_DiT7831_05_2
AQ (no issues)
Pace_DiT7831_05_2B
DS (random reboots and remote issue)
LesC (box switching off, black screen on Sky Sports channels, unresponsive remote, occasional missed recordings)
Pace_DiT7832_05_2B
borris12 (unknown issues)
-+-No longer a forum member-+-

Hi everyone, I have been following this forum for a long time now but not posted previously.
2.5.0 Pace_DiT7431_05_1
Random reboots about twice a week.
Freeview randomly switches to menu view with a red banner warning that there is no broadband. This banner is only on for a few seconds. This has only started during the last software update.
Samsung TV will now not recognise the HDMI output without toggling through the AV inputs. Prior to the last couple of software updates you could get round this by switching the vision box on prior to the TV. On the classic software it didn't matter what was switched on first, I could immediately view vision through HDMI. (I'd be interested if anyone else is experiencing this or whether it is just a shortcoming with my TV)

Controller Issue? or Journaling issue?

Similar Messages

Maybe you are looking for