Core2duo system only shows 1 cpu

This is probably a really easy fix, but i just noticed that my core2duo system only shows
1 cpu in /proc/cpuinfo.
is there something simple i missed in terms of enabling the second core? it worked in
ubuntu (i'm thinking i am running the wrong kernel?)
here is the result of:
[root@minitx etc]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
stepping : 10
cpu MHz : 2200.066
cache size : 4096 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx lm constant_tsc up arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4404.08
clflush size : 64
power management:
Thanks,
M

even more interesting...
i recall having to disable acpi in the bios to get arch to initially boot. I just double checked in the bios, mutlicore is activated and now i've reactivated acpi... I still only get 1 processor, but alot of new info is in dmesg.log
thoughts?
[root@minitx ~]# cat /var/log/dmesg.log
Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.1 20080724 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS)
BIOS-e820: 000000007f6e3000 - 000000007f6f0000 (ACPI data)
BIOS-e820: 000000007f6f0000 - 000000007f700000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
1142MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at [c00f3720] 000f3720
Entering add_active_range(0, 0, 521952) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 521952
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 521952
On node 0 totalpages: 521952
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2286 pages used for memmap
HighMem zone: 290290 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI not present or invalid.
ACPI: RSDP 000F7AE0, 0014 (r0 IntelR)
ACPI: RSDT 7F6E3000, 0030 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 7F6E3080, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 7F6E3100, 50C0 (r1 INTELR AWRDACPI 1000 MSFT 3000000)
ACPI: FACS 7F6E0000, 0040
ACPI: MCFG 7F6E8280, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 7F6E81C0, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7f700000:60900000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
SMP: Allowing 4 CPUs, 3 hotplug CPUs
PERCPU: Allocating 39464 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 4
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517874
Kernel command line: root=/dev/sda3 ro
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2200.057 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2063820k/2087808k available (2120k kernel code, 22688k reserved, 744k data, 264k init, 1170304k highmem)
virtual kernel memory layout:
fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03d3000 - 0xc0415000 ( 264 kB)
.data : 0xc031211e - 0xc03cc380 ( 744 kB)
.text : 0xc0100000 - 0xc031211e (2120 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Calibrating delay using timer specific routine.. 4404.08 BogoMIPS (lpj=7337739)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080321
ACPI: Checking initramfs for custom DSDT
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
Brought up 1 CPUs
Total of 1 processors activated (4404.08 BogoMIPS).

Similar Messages

Activity monitor says I have 1 -3% of System Memory free, yet CPU usage shows less than 10% total of all processes

Activity monitor says I have 1 -3% of System Memory free, yet CPU usage shows less than 10% total of all processes

I think you should review what you wrote. There is no question, hence, my reply. I can't tell by the AM listing what applications are using memory. You need to click on the Real Mem column once or twice to display in descending order.
Aside from what you see in AM, what exactly is your problem or perceived problem. You are very low on Free Mem at the moment the screen shot was taken. Those displays are not depicting your computer's instantaneous memory usage.
About OS X Memory Management and Usage
Using Activity Monitor to read System Memory & determine how much RAM is used
Memory Management in Mac OS X
Performance Guidelines- Memory Management in Mac OS X
A detailed look at memory usage in OS X
Memory Usage Performance Guidelines- About the Virtual Memory System
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent. It will improve the performance of applications that run mostly in RAM or when loading programs.

[SOLVED] Htop only shows last 2 system load values

I have the latest htop (1.0.3) installed on my desktop. The system load meter only shows the last 2 (5 and 15 minute) load averages. Top and uptime display all three values.
How can I get htop to display all three load averages?
Last edited by subraizada3 (2014-06-06 20:45:37)

I had searched my filesystem for a htoprc before, I'm not sure why I couldn't find it at that time.
I can't find any fields that seem to be related to this in the htoprc.
~/.config/htop/htoprc:
fields=0 2 48 18 39 47 46 49 1
sort_key=46
sort_direction=1
hide_threads=0
hide_kernel_threads=1
hide_userland_threads=0
shadow_other_users=0
show_thread_names=0
highlight_base_name=1
highlight_megabytes=1
highlight_threads=0
tree_view=1
header_margin=0
detailed_cpu_time=0
cpu_count_from_zero=1
update_process_names=0
account_guest_in_cpu_meter=0
color_scheme=0
delay=15
left_meters=CPU Memory
left_meter_modes=1 1
right_meters=Tasks LoadAverage
right_meter_modes=2 2

Dual XP 2000+ shows 1 cpu only on K7DM L

Hi,
I have done some upgrading with my box today...after burning an overcloked 1800+ I got a brand new couple of XP2000+. I tested one by one, they work smoothly.
I installed both in the board but on startup it says only 1 XP CPU. It also complains that my CPU is not MP capable and that's OK.
The BIOS shows temps for two CPUs, boths fan speeds also can be seen in the BIOS.
I have set up the flag BIOS MP iden to disable ( as the manual says).
Windows shows only one CPU ( I went through the board already and saw the device drivers mono procesor and the task manager shows only one procesor.
Any help appreciated.
JCG
System
Win2k SP1
k7dml 2x xp 200+
512 MB registered ECC kingstom
BIOS 1.5
The rest is normal stuff....

Hi,
Many thanks for the tip. I already knew the L5 trick but I thought that with the BIOS flag, it would work.
Yesterday night at 3:00 AM I decided to go for the silver paint and now I have my two XPs running nicely as MPs.
I have to say that I have invented a new and different method to paint the bridges. Easier and safer. However you must have a quiet hand to do it. Good thing is it is harmless so you can try as many times you want until it works. I wll try to post some pictures.
Everything looks OK and tmpeng has drastically reduced the time it takes to encode my baby movies...into SVCD....however, alittle bit hot. I used to run my XP1800 at 34 degress these two xp2000+ are nunning at 48 degrees....unreasonable to me....with these temperatures I am not going to play with the clock...
Now that everyting works ( my via ieee 1394 is doing funny things...) I will take some time before I leave the box on the yard for a week....again..as soon as xp2800 drop below the 60 € barrier, I will burn my 2000s until they smoke....some time feb next year I guess.
Thanks to all that answered.
JCG

My mac book pro load system and not show icons only show pointer

my mac book pro load system but not shows icons only show pointer

Can you open Applications by navigating to the Applications folder via the Finder? When you write that your computer doesn't show icons, do you mean your Dock icons? Can you see the Dock as all?
Need just a little more information...
Clinton

CPU Meter in transport only showing 2 cores

Ever since the 9.1.2 update, the CPU meter in the transport bar is only showing 2 cores (I have 8 cores). However, if I option-x to see a floating CPU and HD window, all 8 cores appear. Anyone else with this problem?

Addenddum:
I only see 1 load-bar in the transport CPU-meter. Its amplitude is the amplitude of the heaviest used core, but there also is a thin yellow line within the one bar showing the average load over all cores (I think).
!http://farm5.static.flickr.com/4085/5085584101_263439000d.jpg!
Message was edited by: Eriksimon

Thunderbolt SSD only shows in System Information

I bought an external Elgato Thunderbolt SSD (128GB). After a few months, I decided to turn FileVault on. I shouldn't have done this because it broke my SSD.
I was origionally able to fix it by using Terminal to turn off the ecryption and zero the drive. However, it then broke again and now it only show's up in System Information listed as a Thunderbolt adaption.
It does not appear in Finder or the Disk Utility, it does not show up in Terminal as "core storage", nor does "diskutil list" find it so I can erase is.
Is there any way at all to fix this SSD?
Thank you, Steven.

Try connecting it to another mac or even a Windows PC, if you can find a PC with Thunderbolt port, and see if it shows on that other computer. If it doesn't then the drive itself has failed. This is not uncommon for SSDs. Or it could be the enclosures electronics that have failed. Since this must be a fairly new drive, being TB and a SSD, it might still be within the warranty period. Contact the manufacturer to see if you can get it replaced under the warranty.

X61s Bios shows 4 gig memory, System Prefs shows only 3....

I've got an X61s, and I just installed two 2 gig SODIMMs of PC2-5300 667 MHz memory..... The Bios shows 4 gig installed, but when I use the System function in the Control Panel, it only shows 3 Gig.... Any clue what's up?
Thanks in advance....
Matt

Yes. You're using a 32-bit version of XP or Vista, which can only use up to about 3GB max. Install a 64-bit version if you want to use all 4GB.
I don't work for Lenovo. I'm a crazy volunteer!

TS1363 I'm trying to update to newest software, but during proccess, an error accured, now the iphone 4s wont do anything, it only shows plug into itunes. when i do, the device is not recognized by windows or itunes. any ideas?

im trying to update to newest ios version. but during the proccess, an unknown error accured, now the device wont do anything, just shows the plug into itunes screen. the device does not show in windows or itunes. the iphone wont do anything. i tried restarting, it shuts off and back on, but only shows plug into itunes thing. any ideas?

From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

IMovie only using 50% CPU power

Hi,
When I export my project in iMovie my CPU usage holds at 50%. I accept this does mean I can do other things but would like the export to go faster.
Is this usual for iMovie to only use 50% CPU (and only about 1gb of RAM (of 8gb)) or do I need to do something?
New to Macs so any help appreciated.
dcbevan

Hi
As I get it - Doesn't iMovie take full use of multiple core processors. Not even Pro
applications does this to 100%
BUT
RAM - iMovie or FinalCut are not that RAM hungry - 1 to 2 GB would be OK
Free Space on Start-up hard disk - VERY IMPORTANT
• 25Gb my minimum for iDVD
• 10Gb my minimum for iMovie
• 5Gb and iMovie runs slow and instable
• <1Gb and iMovie might not run OK at all
Other applications running in paralell - results in bad performances
• Energy Saver
• Do not spinn down hard disks
• Use of USB/USB2 external hard disks = Slow and bad performances especially when getting full
FireWire or internal e-Sata performs best.
• Screen savers - may be (by directing it to an empty folder - I got the feeling of slight increase
in performances)
My list on howto speed up iDVD Slightly - might also applie on iMovie.
*Speed up iDVD*
To speed up iDVD
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk - if less than 5Gb slow and unstable - less than 1Gb might even not start.
• Choise of encoding method will give very different productions speeds. On my d-G5 2GHz
*Professional Quality (movies + menus up to 120 min.)* - BEST
Takes about 2 x times the other ones - but if quality is of essence
(Quality might be as good as or even better for movies under 60 minutes - by using Best Performances BUT not for movies up to 120 minutes)
2 hour movie + menu = about 4 hours to encode at it’s best on my system
*Best Performances (movies + menus less than 60 min.)* - High quality on final DVD
1 hour including menu = about 1 hour to encode
*High Quality* (in iDVD08 or 09) / Best Quality (in iDVD6) *(movies + menus up to 120 min.)* - slightly lower quality than above
2 hours including menu = about 2 hour to encode
• Use an as simple DVD-menu possibly without any animation at all. This reduces processing speed dramatically. I use ”Old Theme - and Brushed Metal” and animation turned off.
• An as fast Mac and as many cores/CPUs possibly. My PowerMac G5 has two CPUs and iDVD uses about 120% = use more than only one CPU/Core. How many it can address I don’t know (anyone ? )
• If possibly - Use two internally e-Sata drives - Drive access takes a great deal of time
else FW-800 or FW-400 or USB2 or network storage (slowest and near to useless)
to work on one (internal, boot, Mac OS, Start-up hard disk - will be BAD - and slow
Normally my d-G5 2GHz takes about 2 x movie material when iDVD and Mac OS on one internal HD and material is on the other internal one.
Now with material on an external USB2-drive and an external Lacie FW-400 as Start-up drive material of about 1.5h will need about 4-6 hours to get encoded and burned to DVD.
Choise and use of hard disks is essential.
• I guess that a Solid State Disks might improve speed
• No other programs running in BackGround eg EnergySaver, Internet, AirPort, Bluetooth etc.
• Don’t let HD spinn down or be turned off (in EnergySave)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• If Mac with only place for one internal hard disk. Then I would try to use an external FW (Mac OS Extended) one as Start-Up hard disk and store material on the internal one.
eg iMac or ProBook or alike.
from Karsten -
• I assume that resolution and codec of source is another factor ... scaling (e.g. 1280x720 to 720x576 = that is an 'un-even' calculation). or, a difference in speed reg. to h264, dv-stream or aic as input ....
Yours Bengt W

Mountain Lion 10.8.3: Dock shows 100%+ CPU in Activity Monitor

I upgraded my 'early 2008' MBP from 10.8.2 to 10.8.3 last week. Memory use seems to have increased with no real change in application usage — .CPU utilization seems similar, too. I have been watching Activity Monitor + vm_stat to see if I could identify any issues. I just noticed that the Dock process shows 100% CPU utilization in the detail section — even though the Activity Monitor summary stats show plenty of idle CPU cycles available. Swap activity is minimal — this all makes me question the validity and/or accuracy of the detailed stats shown in Activity Monitor. Any input or comment from the community?
TIA...
P.S. Activity Monitor screen shots are below. And no, I'm not running Parallels as per prior discussion https://discussions.apple.com/message/15596756#15596756 from 2011.

My $HOME/Library/Preferences folder contained only two com.apple.dock.* files:
com.apple.doc.plist w/current date timestamp
com.apple.doc.plist.KBPCAn with two-month old date timestamp
Detailed examination of the com.apple.doc.plist parameters seemed to be correct with nothing abnormal.
The killall Dock command suggested by Kappy seemed to address the 100%+ CPU at first, but then it returned.
Three consecutive full system shutdown/restart cycles seems to have eliminated Activity Monitor showing the Dock process running @ 100%+ CPU after 24+ hours of operation. No changes were made to the content of com.apple.dock.plist. My best guess at this point is that my system's Dock process may have had a memory leak-type issue that is neither traceable or reproduceable at this point.
The Activity Monitor issue variance (Dock process detail @ 100%+ CPU despite the summary record showing idle CPU cycles available) isn't explained. It seems to me that the sum of the detailed Activity Monitor records should match the summary pie chart information presented.
Thanks to Kappy for the input and suggestion. Further comment/discussion WRT the Activity Monitor issue is most welcome...

/proc/cpuinfo shows 1 cpu on 4x6 core machine

Installed VM Server 3.03 on a 4x6 core CPU machine.
- VM Manager shows the machine as having 1 CPU
- /proc/cpuinfo on the VM server shows only one CPU
[root@dcporat05 ~]# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 29
model name      : Intel(R) Xeon(R) CPU           E7450 @ 2.40GHz
stepping        : 1
cpu MHz         : 2400.158
cache size      : 12288 KB
physical id     : 0
siblings        : 1
core id         : 0
cpu cores       : 1
apicid          : 0
initial apicid : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu de tsc msr pae mce cx8 apic sep mtrr mca cmov pat clflush acpi mmx fxsr sse sse2 ss ht syscall lm constant_tsc up rep_good aperfmperf pni est ssse3 cx16 sse4_1 hypervisor lahf_lm
bogomips        : 4802.39
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management:- dmidecode shows 4 CPU's
[root@dcporat05 ~]# dmidecode | grep "Socket Designation"
        Socket Designation: Proc 1
        Socket Designation: Proc 2
        Socket Designation: Proc 3
        Socket Designation: Proc 4
        Socket Designation: Processor 1 Internal L1 Cache
        Socket Designation: Processor 2 Internal L1 Cache
        Socket Designation: Processor 3 Internal L1 Cache
        Socket Designation: Processor 4 Internal L1 Cache
        Socket Designation: Processor 1 Internal L2 Cache
        Socket Designation: Processor 2 Internal L2 Cache
        Socket Designation: Processor 3 Internal L2 Cache
        Socket Designation: Processor 4 Internal L2 Cache
        Socket Designation: Processor 1 Internal L3 Cache
        Socket Designation: Processor 2 Internal L3 Cache
        Socket Designation: Processor 3 Internal L3 Cache
        Socket Designation: Processor 4 Internal L3 CacheIs this an issue?
Thanks,
Fraser

xm info appears to show one CPU as well
[root@dcporat05 ~]# xm info
release                : 2.6.32.21-45xen
version                : #1 SMP Wed Nov 30 00:49:18 EST 2011
machine                : x86_64
nr_cpus                : 1
nr_nodes               : 1
cores_per_socket       : 1
threads_per_core       : 1
cpu_mhz                : 2400
hw_caps                : bfebfbff:20000800:00000000:00000940:000ce3bd:00000000:00000001:00000000
virt_caps              : hvm
total_memory           : 65532
free_memory            : 62993
node_to_cpu            : node0:0
node_to_memory         : node0:62993
node_to_dma32_mem      : node0:3255
max_node_id            : 0
xen_major              : 4
xen_minor              : 0
xen_extra              : .2-OVM
xen_caps               : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler          : credit
xen_pagesize           : 4096
platform_params        : virt_start=0xffff800000000000
xen_changeset          : unavailable
xen_commandline        : dom0_mem=1828M
cc_compiler            : gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)
cc_compile_by          : mockbuild
cc_compile_domain      : (none)
cc_compile_date        : Thu Sep 22 16:11:15 EDT 2011
xend_config_format     : 4Same with dmesg I think
[root@dcporat05 ~]# xm dmesg
\ \/ /___ _ __   | || | / _ \ |___ \    / _ \ \   / / \/ |
\ // _ \ '_ \ | || |_| | | | __) |__| | | \ \ / /| |\/| |
/ \ __/ | | | |__   _| |_| | / __/|__| |_| |\ V / | | | |
/_/\_\___|_| |_|    |_|(_)___(_)_____|   \___/ \_/ |_| |_|
(XEN) Xen version 4.0.2-OVM (mockbuild@(none)) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) Thu Sep 22 16:11:15 EDT 2011
(XEN) Latest ChangeSet: unavailable
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line: dom0_mem=1828M
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f400 (usable)
(XEN) 000000000009f400 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfd2e000 (usable)
(XEN) 00000000cfd2e000 - 00000000cfd48000 (ACPI data)
(XEN) 00000000cfd48000 - 00000000cfd49000 (usable)
(XEN) 00000000cfd49000 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00000 (reserved)
(XEN) 00000000fee00000 - 00000000fee10000 (reserved)
(XEN) 00000000ffc00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000102ffff000 (usable)
(XEN) ACPI: RSDP 000F4F20, 0024 (r2 HP    )
(XEN) ACPI: XSDT CFD2E900, 007C (r1 HP     ProLiant        2   Ò     162E)
(XEN) ACPI: FACP CFD2E9C0, 00F4 (r3 HP     ProLiant        2   Ò     162E)
(XEN) ACPI: DSDT CFD2EAC0, 2453 (r1 HP         DSDT        1 INTL 20030228)
(XEN) ACPI: FACS CFD2E100, 0040
(XEN) ACPI: SPCR CFD2E140, 0050 (r1 HP     SPCRRBSU        1   Ò     162E)
(XEN) ACPI: MCFG CFD2E1C0, 003C (r1 HP     ProLiant        1             0)
(XEN) ACPI: HPET CFD2E200, 0038 (r1 HP     ProLiant        2   Ò     162E)
(XEN) ACPI: FFFF CFD2E240, 0064 (r2 HP     I17             2   Ò     162E)
(XEN) ACPI: SPMI CFD2E2C0, 0040 (r5 HP     ProLiant        1   Ò     162E)
(XEN) ACPI: ERST CFD2E300, 01D0 (r1 HP     ProLiant        1   Ò     162E)
(XEN) ACPI: FFFF CFD2E500, 015E (r1 HP     ProLiant        2             0)
(XEN) ACPI: FFFF CFD2E680, 0176 (r1 HP     ProLiant        1   Ò     162E)
(XEN) ACPI: BERT CFD2E800, 0030 (r1 HP     ProLiant        1   Ò     162E)
(XEN) ACPI: HEST CFD2E840, 00BC (r1 HP     ProLiant        1   Ò     162E)
(XEN) System RAM: 65532MB (67105588kB)
(XEN) Domain heap initialised
(XEN) Found and enabled local APIC!
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2400.158 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) I/O virtualisation disabled
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 16 KiB.
*(XEN) Brought up 1 CPUs*
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0x2000 -> 0x6d5000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.:   0000001000000000->0000001002000000 (459776 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80002000->ffffffff806d5000
(XEN) Init. ramdisk: ffffffff806d5000->ffffffff81038600
(XEN) Phys-Mach map: ffffea0000000000->ffffea0000392000
(XEN) Start info:    ffffffff81039000->ffffffff810394b4
(XEN) Page tables:   ffffffff8103a000->ffffffff81047000
(XEN) Boot stack:    ffffffff81047000->ffffffff81048000
(XEN) TOTAL:         ffffffff80000000->ffffffff81400000
(XEN) ENTRY ADDRESS: ffffffff80002000
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM: .....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 168kB init memory.Edited by: 787931 on Feb 14, 2012 4:17 PM

Lenovo X240, only 1,6GHz cpu

Hello, I have a Lenovo X240 that should have 2,29GHz cpu speed.If I look in Computer properties and System I can see this info: Intel Core i5-4200 CPU @ 1,60GHz 2.29GHz. CPU-Z only shows 1596MHz at Core speed. Any ideas?

> I have found other people with the same problem but cannot seem to find a solution
Please use search option on this forum and you will find enough topics with very precise explanation why the notebook runs on 598 MHz only.
I can say just one thing: it can not be that notebook runs like this from the first day. If your friend sold you this notebook he conceals something from you. Anyway contact nearest service partner in your country and they can fix this for you.

Lenovo X240, only 1,6GHz CPU speed

Hello, I have a Lenovo X240 that should have 2,29GHz cpu speed.If I look in Computer properties and System I can see this info: Intel Core i5-4200 CPU @ 1,60GHz 2.29GHz. CPU-Z only shows 1596MHz at Core speed. Any ideas?

user551 wrote:
Where can I see how much CPU that is used when I run video playback?
I tried cpu-z but that is only showing 1,6GHz.
I use System Explorer. After installing it just place your mouse cursor over the SE icon in the system tray. That will bring up a status window that shows, among other things, the CPU speed.
Incidentally what size AC charger are you using? Some ThinkPads will not run at full speed unless they're powered from AC using a 90W charger.

SCCM 2012 R2 Client only showing 2 items under Actions

I've enable AD Forest Discovery on Primary Site also checked Automatically create AD site boundaries when they are discovered and Automatically create IP address range boundaries for IP subnets when they are discovered.
I didn't change this (default) Disable AD Forest Discovery on CAS.
I am still running SCCM 2007 R3 SP2 in Production environment. Do I need to remove all the boundaries first on SCCM 2007? Before I could install SCCM 2012 R2 client?
The reason that I manually install SCCM 2012 R2 client to my test computers just want to see if the SCCM 2012 R2 client will install without any issues. Right now, there's :(
On my Client Push Installation Properties, I haven't Enable automatic site-wide push installation. I just don't want SCCM 2012 R2 client is automatically pushing it out. Should I enable this? Is there any effect?
Two nights ago, I manually deploy SCCM 2012 R2 client (right click to deploy SCCM Client) to my test Win7x64 Enterprise and Win8.1x64 Enterprise. Until this morning Actions are not fully there (it should be total 11)
SCCM 2012 R2 client (version 5.00.7958.1000) installed but SCEP 2012 is not install (I think there's a problem here) since I checked the Actions button on both of Win7x64 Enterprise and Win8.1x64 Enterprise are only showing 2 Actions:
1. Machine Policy Retrieval & Evaluation Cycle
2. User Policy Retrieval & Evaluation Cycle
I've checked on both of Win7x64 Enterprise and Win8.1x64 Enterprise logs (using CMTrace):
1. CcmExec.log -> no errors
2. LocationServices.log -> Current AD site of machine is Default-First-Site-Name
3. ClientLocation.log -> It knows my new MP (correct one)
4. ClientIDManagerStartup.log -> with errors below
ClientIDManagerStartup.log has lots of RED errors (same one):
<![LOG[RegTask: Failed to send registration request message. Error: 0x8000000a]LOG]!><time="11:26:13.695+420" date="07-03-2014" component="ClientIDManagerStartup" context="" type="3" thread="1716"
file="regtask.cpp:1297">
I am hoping someone will be able to point me to the right direcly, please. Thanks, Reza
Reza Prawirasatya

Idan,
Thanks for the info.
I have check this registry below:
Check in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Mobile Client
It's pointing to my new site code of SCCM 2012 R2 (it's not SCCM 2007 site code).
What I did wrong I deploy SCCM 2012 Client Custom Settings to a collection that I created and also Antimalware Policies to that collection as well where that collection has 0 (none members).
So I deleted and just simply pointed both SCCM 2012 Client Custom Settings and Antimalware Policies to All Systems and all my test computers (workstations & servers) have SCCM 2012 R2 client along with SCEP 2012.
I have more questions below:
What's the best way for me to approach this SCCM 2012 R2 Client push to a test computers (workstations and servers).
I have SCCM 2007 R3 SP2 is still running in Production, currently Boundaries set as IP subnet (not using AD Site, it used but I changed it 2 years ago).
Now, SCCM 2012 R2 Primary Site set Enable AD Forest Discovery with Automatically create AD & Automatically create IP address range boundaries for IP subnets.
Of course, by turning this option above, it will pick up lots of different IP subnets. Even the one our sister company (lots of different domain).
1. In SCCM 2012 R2 Boundary Groups, I set Default-First-Site-Name (AD Site), under Site Systems tab, I have also my Primary Site SCCM 2012 R2 here.
Here's the questions:
1. Do I need to add IP subnet in SCCM 2012 R2 Boundary Groups? Do I need to add let's say 10.xxx.20.xxx (IP subnet here).
2. Also, do I need to delete IP subnet in SCCM 2007 Boundaries that correspond to that IP subnet? Let's say I have 10.xxx.20.xxx (IP subnet here) and remove this one since I have added on number 1?
Reza Prawirasatya

Core2duo system only shows 1 cpu

Similar Messages

Maybe you are looking for