Correction Invoice with Items TreeType != iNotATree

Hi,
I want to create Correction Invoice document with Items which TreeType = SAPbobsCOM.BoItemTreeTypes.iSalesTree
When I'm adding Correction with reference to some document (BaseType = 13 or 165, BaseEntry=... and BaseLine = ...) then everything is OK,
But when I try add Correction without ref. (no set BaseType,BaseEntry and BaseLine) then I get error:
"Wystąpił błąd wewnętrzny (-5002)"
"Internal error (exception) occurred (-5002)"
When all Items on Correction has TreeType = iNotATree then I can add this Correction without any reference.
The property correction.Lines.TreeType default value is iNotATree, but this property is ReadOnly.
How can I add this document?
Edited by: Dariusz Maron on Jun 4, 2009 12:07 PM

Hello Wolf
1) This was an issue in older releases but has been corrected (supposedly) since 4.5 B
Take a look at OSS note: 146091 - Invoice correction: new pricing not possible
But I am sure you are in a much higher release. Review it any ways.
2) Did you try with 'B" or ""C" for the second pricing type? The help says 'You should give a new pricing type to the debit memo item'.
3) Also is the invoice type you are copying from- does it have a 'M" in the SD document category.? T code VOFA. I believe this is prerequisite
4) Check how the item cats are set up (G2N/L2N): The Returns field in Business data should be selected for credit items but not for debit items.
5) Finally the culprit could be the way you set up PR00 (V/06). Check what changes can be done: Are you allowing manual entries? Just a thought.

Similar Messages

Customer Invoice with item numbers without OM installed.

Hi
We would like to know if we want to import customer invoices with items and there is no Order Management module.
How items would be validated. Can this be done through item validation org and if yes, what setups are required and in which module.
Regards,
Ish
Edited by: user12190893 on Jan 16, 2012 3:22 PM

Hi,
I want to create Customer Invoice (DR) with the BAPI BAPI_ACC_DOCUMENT_POST. Can you tell me if you realize this project?
Best regards

Supplier Invoice with Items without Purchasing

Hi
We would like to know if we want to import supplier invoices with items and there is no Purchasing module.
How items would be validated. Can this be done through item validation org and if yes, what setups are required and in which module.
Regards,
Ish

From above cases, first 3 cases is ok and i know how to process with all CIN related things.But i am little confused in the 4th case.
Whether we need to mention the tax code in PO?
1. If no, whether we need to add up the tax amount to the material basic price and then raise the PO?
2. If yes, how the tax amount postings will be done since we will not be posting the excise invoice in j1iex?
I think u will require the tax code where the excise duty is captured in inventories like JMIP condition types of excise so that it would get added to stock during GR and during invoice u will pay this tax to the vendor.
As u donot take credit u don't have to capture the excise invoice as .

Credit note for invoice with item with negative value

Hi,
is it possible to create credit note for invoice, where in one line is negative value (its non stock item).
There exists 2 possibilities:
negative qty and positive price (its possible create only through SDK, not SBO)
positive price and negative qty
for example
itemcode 123
qty -1
price 1000
How to create credit note from this invoice?
Thanks a lot for hints.
Petr

Hello Petr Verner,
It's a standard functionality of Business one, that it is impossible to enter a negative amount in an independant credit note or in a credit note based on a invoice with negative amount.
To solve this issue:
1. For the rows with the positive Row Total, create an "independent" Credit Memo (not based on an Invoice).
2. For the rows with the negative Row Total, create another Invoice with a positive Row Total opposite to the original negative Row, and reconcile between the two rows manually via Banking => Bank Statements and Reconciliations => Reconciliation.
Hope the above helps.
Wilma Wang
SAP Business One Forums Team

Make invoice with item level only not by batch level

Hii
i made a delivery doc say material 'A' having batch1,batch2,batch3 with different qty .
exp:(VL03N)
material a batch1 10ton
material a batch2 20ton
material a batch3 30ton
Now i wanted to club all this qty and do invoice with single item for 'Material A' ,it shouldn't come with batch level wise material .
so in vf01 it should look like this .
material a 50 ton .
Plss suggest what should i do for this cases ?? if poosible for changes in routine vbrk/vbrp in copy control then kindly suggest /
sourav .

Hi,
Is your requirement for printing the invoice or while creating the invoice [VF01] Please confirm.
regards,
Chetan

Print correction Invoice with Advance Layout Designer

Dear All,
we will use the Correction invoice in the System.
But i couldn't find a possibility to create a Layout for this document Type.
The Document Type is OCSI but this i couldn't find it in the Define Layouts List.
Thanks and best regards
Serkan

Thank you for the info, but this message don't answer my question.
i search a way to create a Layout with the Advance Layout Designer for the correction Invoice.
i cant open the designer for that. just can create the standard Layout from the system..
do you know if the Advance Layout are supported wit the 8.8 Version?
Thank you very much!
Serkan

Approval Query for Invoices with Items Onhand below zero.

Dear Experts,
I would like to make an approval procedure applicable on A/R Invoice.
When ever one of the Invoice items OnHand amount is below ZERO - I need the Approval Procedure to Popup and this way the Produce of the Invoice will be blocked.
Is there any way to write a query on Approval Template for that?
Thanks!
Regards,
D.Medalion

Hi D.Medalion
Please Follow some step
First Create Approval Stages in Administration ->Approval Procedures->Approval Stages
First -
Administration ->Approval Procedures->Approval Templates->Documents-> Click On A/R Invoice .
Second- Administration ->Approval Procedures- Approval Templates->Terms->When the Following Applies->Click Tick On Deviation from Commitment and ration Drop Down Choose Greater or Equal
Thanks & Regard
Khan Imran

How do I post a Poland SD Correction Invoice for zero amount

Hi,
Our setup for creation of Correction Invoices for Poland is as follows:
1) Create a correction Sales Order with reference to the original Customer invoice - this is a custom-designed document showing the current and 'to be' lines that will eventually appear on the correction invoice.
2) Create the correction invoice with reference to this correction sales order.
One of our business users has a situation where all the goods from a delivery were damaged, and a credit is needed as a result. The goods are not being returned, as the quantity is small. Therefore this should in theory be a correction invoice, to amend the amount invoiced to zero.
How can this be processed? I can't create and bill a Correction Sales Order for it, as the 'to be' line item needs to be set to zero, and SAP therefore treats the Order as incomplete - and you can't bill an incomplete document.
Of course we could just process a Return and then mark the stock as scrapped, but if possible we would prefer to find a solution using Correction Invoices.
Can anyone advise?
Val

Hi,
You need to use Returns scenario for this purpose and reutnr whole quanitites and created Corrective Invoice for the whole quantity where 'was' section should present the data from original invoice and 'to-be' section should present all items with qty zero. You need to get the 'was' section from original invoice and play with the 'to-be' section on the printout. Pelase remember also to put the correction reason 'Goods returned by customer', as it is Polish law requirement as well.
Regards,
Marcin

AR correction invoice - other warehouse in "should be"

Hi all!
I've got a problem with adding correction invoice with changed warehouse.
My client sells fruits to a coustomer from warehouse A (goods). Customer sends back part or all goods because they are perished.
We need to do AR Correction invoice, but perished fruits should be received on warehouse B (perished fruits).
When I'm trying to change warehouse in "should be" inn AR Correction invoice I get this message:
"Warehouse code must be the same on corresponding "was" and "should be" rows.
Did anyone got the same problem and solved it?
Any ideas?
Thanks in advance!

I believe you need two transactions to reflect your business process. First is the AR correction invoice to the same warehouse. Then an Inventory Transaction to move them to the right warehouse.
Thanks,
Gordon

Problem in invoice correction (ZRK) with deleted territories.

Dear Gurus,
When invoice correction is created for invoices with deleted territories the correction(ZRK) should go to the new territory but it doesn't happen in the following case.Some time ago we were closing territories by changing account group from ZTERR to ZOTR type and when creating ZRK it worked as desired like Invoice correction request the territory partner was changed both on header and on item level. But last year we were asked to stop using ZOTR for closed territories and to mark deletion flag instead.
Since then we have problem that the new territory is not reflected in the invoice correction and always the old territory is reflected in the invoice. How to correct this?
Can you please assisst. .
Thanks and kind regards,
Ricky

Hello,
I think some technical details are necessary.
- what is the technical name of field "Territory" ?
- What is the link between the Territory and the account group ?
- where did you set deletion flag ? By which transaction ?
Thank you.
Best regards,
Ivano.

0040000240 000010 Item category MSSC ZWVN cannot be invoiced with billing

i have configured Ztype contract and Billing Type also done the copy control with my document type and Billing type with item category ZWVN but While doing Billing through contract in Billing Plan am getting error 0040000240 000010 Item category MSSC ZWVN cannot be invoiced with billing type FAZ
Please advice to correct.
thanks
MS

Hi
I done the copying control with ztype created Order Type and Billing type i maintained header as well as item level as i mentioned earlier am creating Milestone billing for contract , once i make copy control as per defined in VOV4 am able to the billing but billing block is not working , i done all the setting for activating billing block but its not working,
below are the setting config.
Path: IMG -> Sales and Distribution -> Billing -> Billing Plan -> Define and assign Date categories -> Maintain Date category for billing plan type

How to create a invoice with invoice items in SRM?

Hi experts,
I am testing my BW custom code for SRM. My question is I have to create a invoice with line item 1 quantiy 20 in SRM - development. After this I have mark line item 1 with a deletion indicator X in SRM and create two more line items and load it again in BW. This time in BW it should delete line item 1 with deletion indicator X and load the two new line items that I created.
Please tell me the T-code and step by step instructions to create it.
Thanks in advance.
Sharat.

i answered by myself.

Payment with residual items in invoices with defer $1 in transaction F-32

Dear all,
We receive the following message when we want to clear an item which has a deferred tax code.
Payment with residual items in invoices with defer $1
Is there a way to clear these items? I've found on the forum:
" Please note that the residual item option is not supported by the
deferred tax solution. Please use the partial payment option instead.
The report does not support residual items payment. The reason
is clear. The second and subsequent residual item payments have no
reference to original invoice. The report blocks such postings.
If you use deferred tax solution in your system (RFUMSV25 or RFUMSV50)
it is forbidden to use residual item method "
However in the next lines the person said that for F-32 it works:
"But it allows me to do residual item in F-32 (customer clearing)".
Can this problem be solved or is it just impossible?
Regards.
Leen
Edited by: Leen Debrabanter on Dec 8, 2010 1:23 PM

Hi Leen,
I'm facing the same error in F-28. has this been answered? If so, kindly provide the solution.
Thanks

Partial Payment (with invoice reference) for Invoice-based items

Hi Gurus,
I'd like to make partial payments to credit memos while "Include partial payment" is activated. However, if i activate "Include partial payment, partial payments for invoice-based items are no longer possible (partial payment amount is displayed only, and full amount is automatically applied).
My credit memos were posted via BAPI_ACC_DOCUMENT_POST. I've read that when using BAPI, invoice reference field is automatically populated with "V".
Can you please enlighten me what is SAP's logic behind this. How does SAP determine invoice-based items? And is there a workaround so I could still make partial payment while it is activated? Thank you.
Regards,

Hai Dianne,
Check it once OBA4 & OBA4 t.codes both are Tolerance Group
Regards
Madhu I

Payment with Residual items in invoices with defer $1

Dear Experts,
While doing amount splitting for a customer using tcode f-32 i am getting the error "Payment with Residual items in invoices with defer $1".
Please help.
Thanks and Regards

Hi,
The invoice value was Rs 100,000.00; this includes an amount of Rs 10000 as retention. The amount of Rs 100,000 is debited to the customer.
Now i want to split the debit to the customer into 2 parts. One for retention and the balance for the receivables. For this i am using t code f-32 where in i will split the amount into 2 parts as Rs 10000 and Rs 90000.
While posting this doc i m getting this error.
Thnks

Correction Invoice with Items TreeType != iNotATree

Similar Messages

Maybe you are looking for