Cost Center Copy.

Hi to All,
My name is Samad Farooq, we are curently using SAP 4.6C.
Recently i have created a new cost center ABC. Now what should i do to copy all history (all line items) from cost center XYZ to cost center ABC.
Looking forward for your response.
Thanking You All,
Samad Farooq

Hi Rakesh,
Thank you. I am already using KB61 for reporting line item.But the problem is, you need document no's. I had collected all the line item's corcerning the particular cost center by using the report KSB1 and also filtered the document number's from that list (Ref. Doc Number).
But with document type SA,KG ,KL etc are accepted by KB61 when entered as Accounting document number. Document with type WA,WE,AB are not accepted and error message prompted is "Document is not in Database, Search document archive?".
Now finally, how can we repost line items with document type AB, WA ,WE, RE, & RL etc.
Thanking you , once again for helping me out.
Samad

Similar Messages

SKF Cost center copied over Profit center

Guys,
How can I copy the data introduced on the cost center side (either actual or planned: KB31n , KP46), to the profit center side (7KE5, 9KE5)?
I have both cost center assesment cycles (KSU5), and profit center assessment cycles (3KE5) and intend to use the SKF
Does the data have to be duplicated?
don't offer reward
KR - Loï

Hi,
There is a standard procedure of transfer of statistical key figures (1KEE). What's wrong with it? Also, you can activate real-time transfer for PCA, if you prefer.
Regards,
Eli

Cost center in functional location

Dear all,
In functional location and in equipements it is possible to add a cost center.
Could you please tell me how this cost center is used (on creating orders and/ or notifications)? Is the cost center copied into the order? As the cost center of the workcenter/ activity type is used for the costs of an order, is there a need of this cost center in the master datas?
Thank you.
Best regards,
Thomas

Hi Thomas,
The Cost Center from the Work Center will be used for the calculation of the actual cost incurred for that Maintenance. Based on the cost center selected in Equipment & Functional Location, settlement rule will be defined in case you want to change it, do it manually as per your wish. The costs incurred will be posted in the cost centers based on equipment or settlement rule & not based on work center cost center.
Regards,
Maheswaran.

Copy cost center planning to profit center

Hi dear,i did cost center planning with KP06,then i try 1KE0 to copy cost center planning data to profit center,but seems it does not work,because there is no relevant planning data when i use KE5Z to check planning data
can someboyd kindly tell me what i need to do to transfer cost center planning to PCA,THANKS

Hi,
To integrate cost center accounting (CCA) planning with PCA, for each fiscal year in Maintenance of Versions, the Integrated Planning checkbox should be checked . Also in PCA, maintenance of plan versions -> settings for Profit Center Accounting, the Online Transfer checkbox should be checked so that the postings are transferred to Profit Center Accounting for each activity automatically
Tcode KE5Z is for Profit Center Actual Line Items. So even if you select record type 1 here, it will not give planning data. Similarly, tcode KE5Y is for Profit Center Plan Line Items. If you select record type 0 here, it will not give actual data. If Integrated Planning is activated (as mentioned above), then KE5Y will give you all planning data, irrespective of whether it is planned using PCA or CCA.
Regards,
Sangeeta

Copy cost center hierarchy to profit center hierarchy: is this possible?

Hi,
I would like to know or I can copy my standard cost center hierarchy to my standard profit center hierarchy. If so, how to proceed?
Thank you in advance,
Eric van Zundert.
Ps. We do not have enterprise organisastional active.

Hi Eric,
No standard tool exists for this operation. However, if you really prefer to do it manually, you can pull a trick. You can export your cost centre hierarchy to TXT file, correct there certain parameters (change BCCSS to BGLPCT, etc.) and then import it as profit centre hierarchy.
Regards,
Eli

Copy planning for cost center Runtime error

Dear Gurus,
I am running KP97 to copy planning for cost center.
but I got following runtime error:
===================================================================
Runtime Errors         DYN_CALL_METH_CLASS_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_CLASS
       Occurred on     07.01.2009 at 13:21:25
What happened?
Error in ABAP application program.
The current ABAP program "SAPLGUMD " had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_CLASS',
was neither
caught nor passed along using a RAISING clause, in the procedure
"USER_REFRESH_RE_EA" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Class "CL_REEX_COPL_MASTERDATA_CHECK" was chosen during dynamic method call,
but could not be found.
=====================================================================
can anybody give me a hint how to solve the problem?
B.R.
George
Hi all, I searched the SAP notes, and found there is one note NOTE_0000632335 related to copy planning, I installed the note by TCode snote. the KP97 can run now, but for the IDES controling area 1000, I tried to test run copy version 0, period 1 to 12 from Fiscal year 2003 to 2004.
there are many records with error.
shall I ignore the error , unselect the test run and continue?
does anyone have similar experience with IDES R/3 4.71? why cannot I carry out all steps in online document for IDES?
B.R.
George
Edited by: George Pan on Jan 7, 2009 11:39 PM

Hi I checked the error with copying plan data. it's all because of 'plan data already exists'.
so I just ignore the error and continue.
thanks!
George

BPS Copy plan data from one cost center to another using vairables

Hi experts,
I am trying to copy the planning data from one cost center to another in BPS.
I have just done it using a copy function and in the parameter group entering the costs centers for source and destinations.
What I am trying now it is to let the user select what this destination cost center could be.
I don`t know if this can be done using a variable. What I am thinking is; when the user enters executes the parameter group a pop-up appear that let him select the cost center for the destination.
May be this is not possible. Can you suggest me other ways of doing this?
Thanks in advance

Hi,
u can achieve this by creating a variable with the replacement type as 'User Defined Values'. You also need to enable the check box 'Input Allowed by user'. And at the planning level, in the 'Selection' tab, you should map the charecteristic (Cost Center) with the created variable. Same thing should be done at the planning package level.
Then, when you execute the parameter group, a pop-up comes asking for the value of the costcenter.
Regards,
Srinivas Kamireddy.

Copy from planning to Budget in Cost Center Accounting (Controlling)

Hi to All,
Currently we are using the SAP 4.6C Version.
Is there anyway to copy the planned version into Cost Center Budget when using the TCODE:KPZ2 (Cost Center Budget).
SAP has provided the same option when dealing with Internal Orders. We can copy the Planned Version by Edit->Copy View and in Setting->Planned Total Version we can set the version what we want.
Is there any way to perform the above funtionality under Cost Center Accounting.
Thanking you all in advance.
Samad Farooq

Hi,
Good evening and greetings,
Please go through the following SAP OSS note
Note 15966 - Copy Planning: Only Manually-Planned Values
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Error~ PR G/l Account & cost center is not appearing in PO while copying

Dear All,
I am converting PR into PO, while creating PR I have assigned account assignment cat as "K"(cost center ), so i assigned Cost center and G/L account , After this I tried to convert this into PO, but in PO again it is asking for G/L account & cost center onemore time,Earlier it wasn't .
May be some where the setting got changed but I am unable to find where exactly this setting got changed.
Please anyone could help in this.
Regards,
Nagaraj S

well thats really wiered
can u do one thing in your quality system create one PO and pleas but make sure the data in the po sholud be same as that of PR but this PO will be created without the reference of PR
i want to check if system is able to find the G/L account automatically which ideally it should find
in case the g/l is not picked automatically then in that case check the valuation class in material master and the g/l which is maintained in gbb or not and make sure the g/l is a cost element
if the g/l comes automatically then check the PO document type settings in the those 2 folder at the left poriton of screen in IMG>>olme>>POdefine document type

HR PNP Logical Database Using Cost Center selection: error!?

Hi all,
I'm using PNP logical data base and using the selection-fields available through HR Class Reports (a copy of PAY_DEF) but what happens is if in selection-screen I fill the personnel number say 1000, i get the payroll data I'm trying to get, but if i use the search field cost center of that exact person i get nothing. Does anyone has a clue on what i might be doing wrong? Because all the other search fields work, company code, HR area, everyone, but cost center, and I'm positive that i use the right cost center.
Thanks in advance,
Paula

Even though nobody answered me, i finally found the solution for my problem. so and because someone might need it here it is:
Go to Spro->Personnel Management->Human Resources Information System->Reporting->Adjusting the Standard Selection Screen and then:
1st Create Report Categories and
2nd Assign Report Categories
Since not all rep. categories on the 1st assignment is explicit on how will sel screen appear i advice you to go to the 2nd point, and execute some of the programs that appear there, and that might look alike to what you are looking for, and if you are so lucky as to find one exact use the same report category in your program, if its very alike, well, copy the Report Category into one of your own and change it the way you need it to be.
Hope this be helpfull for someone.
Paula.

Report Painter Request - Cost Center and WBS Element

Hi Everyone,
Currently, my company settles all project related expenses through to a cost center by way of an internal settlement cost element (category 21). The issue with this is that when the expense gets to the cost center, they lose all visability as to where the expense originated, such as salaries or travel expense (category 1 cost elements). We can't switch the settlements to the originating cost element from wbs to cost center just because of the additional data/volume that will cause. My thought was to create a report painter that can run by cost center but also show the wbs's that settle to that cost center and group the expenses by primary cost element (cat 1). I'm assuming that there is a way to marry a cost center and wbs element by way of the wbs settlement rule but how would that be done for reporting purposes? I've seen it done before by way of a nightly job that created sets based on the combination of cost center and wbs but I'm not sure how that was done. Any advise and examples?
Example:
Cost Center: IT
WBS: A.0017.01.01 (settles to cost center IT)
Postings made:
1. CC IT and CE 552000 "salaries"..............................$20,000
2. WBS A.0017.01.01 and CE 552000 "salaries"........... $5,000
3. Settlement of WBS to CC (expenses flow through to CC IT by way of CE 985000)
I want to run CC IT and see that the account 552000 really shows $25,000 and can be broken down by cost object (CC and WBS by the amounts above)
Thanks,
Pete

Hi Peter,
I had a similar requirement and used report painter report group 1SHK-002 (in library 1VK).
I took a copy of the standard and ameneded it slightly, I switched the explode so it occured on the cost center not cost element.
The report runs so that direct costs on the cost center are shown at primary cost level. And values settled to the cost center are shown on the partner object. In your case i guess WBS Elements (Partner ObjType WBS).
Now in my case I didnt need cost element breakdown on partner level, just on cost center so effectively I have(sorry for text alignment but I hope you get the idea):
GL1   ............. 100
GL2   ............. 250
+ Cost center1 total ....350
GL3 .............   50
GL4 ............. 100
+ Cost center2 total.... 150
Primary Cost Total ..... 500
X-YZ-1.200 .............   50
X-YZ-1.400 ............. 100
+ WBS total ............. 150
IO 1............. 100
IO 2 ............. 100
+IO total ............. 200
Partner Total............. 350
Overall total ............. 850.
Its not exactly like your requirement but it might be a good report for you to work with to get what you need.
Elaine

Creation of new cost center record

Hi All,
Using PP01 we are copying the current cost center record and changing the enddate to 12/31/9999 on the new record. but when i go into PA30 to look at them, it is creating an extra record with different date and even it is not allowing me to delete the record (Message as : Cost Center dones not exist).
Appreicate your help.
-suresh

Hi,
I am not sure wheather we (HR) create the cost centers .It is to be done thro T.Code KS01 (FICO)., and anyway if you are able to then not able to delete it then go to T.Code kch6n..again a FI transaction select extras from the menu bar and click on 'Ambiguity' which should solve your problem
Regards
Uday

Transaction Code for Cost Center Report

Hi everyone,
using report painter I have created a cost center report which is a copy of a standard report. Now I would like to create a transaction code for this report which can be run from the menu.
Can anyone explain step-by-step how to do this? I have already tried creating a TC for GR55 but this seems not to be what I want. I want the TC to start the report directly.
Thanks in advance for your help!
Regards,
Martin

Hi,
Go to SE93 (create a new transaction), choose 'Transaction with parameters'. In the Transaction field put 'START_REPORT' and tick 'Skip Initial screen' flag. Tick all flags for GUI support and in the parameters section (below) type four parameters:
D_SREPOVARI-REPORTTYPE = RW
D_SREPOVARI-REPORT = (library of reports)
D_SREPOVARI-VARIANT
D_SREPOVARI-NOSELSCRN
Regards,
Eli

Cost Center

Hi, My name is Samad Farooq . We are currently using SAP 4.6C.
Intially i had a requirement of copying line items from one cost center to another one. This can be done thru repost line items, but using this option how can we repost line items with document having type of AB.
Because when using the report ksb1 we all collect all the line items and from there we can use re,doc number to be entered in kb61. But when we enter document of type AB it gives error that Doument not in DataBase search archive?.
Thanking you all !!!!!!!
Samad Farooq

Hi
Document type AB is accounting document entered throu F-02. What you can do is instead of rectifying directly in controlling using reposting line items.
You can use FI entry to rectify the reposting from one cost center to another.
Regards,
Suraj

Adding cost center in RABEST_ALV01 from ANLZ node - ADA Logical database

Hi,
I am trying to display cost center in output list of RABEST_ALV01 ALV report (Copied it to ZRABEST_ALV01).
I was able to include fields which are there in ANLAB and ANLAV in FIAA_SALVTAB_RABEST structure - CI_REPRABEST inlcude. And have included cost center field also in the include (KOSTL).
This ALV report RABEST_ALV01 is reffering to ADA logical database. I included a node explicitly in the program along with other node declaration :
NODES: anla0,
             anlav,
             anlz ,
             anlb,
             anek,
             anepv,
             anlcv.
and added a GET statement in the program GET ANLZ before moving the values to final internal table.
Here, the the issue is that the values of ANLZ is getting displayed as "#".
Kidnly suggest.
Thanks and Regards,
Rashmi

Hi Rashmi,
Please make sure the order of the nodes should be same as the order in which they are there in LDB or else they will be overwritten
Thanks
Bala Duvvuri

Cost Center Copy.

Similar Messages

Maybe you are looking for