Couldn't Find getCurrent() in BindingContext
Hi every body ..
DCBindingContainer bb = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
getCurrent NOTFOUND
Jdeveloper 11g
Windows 7
DB is 11g Express
Thanks in Advance
make sure you have the right import statement for the BindingContext
import oracle.adf.model.BindingContext;Timo
Similar Messages
-
i have bought a film from itunes and the credit has come out of my account, but i can't find the film anywhere, it said it was downloading, then i left the laptop and on return i couldn't find the film. how do i find the film?
Maybe it is in the Purchased category of iTunes,
Try going there -
Couldn't find root user. Sleeping and trying again.
Last week I installed an MSO 2004 update on my G5 iMac running 10.4.11.
Then I attempted to repair permissions. The repair permissions process
halted at about half of the progress bar. I let it cook for about two
hours without success, then tried to force quit Disk Utility. I
couldn't force quit it, so I very reluctantly turned off the Mac;
something I've rarely ever done. I waited five minutes and then turned
the Mac back on. The startup sequence progressed to the point where the
system displays the gray apple on the gray background, and the circular
progress indicator or gear begins turning. I let it turn for one hour
and then powered off the iMac, then powered it back up with the same
results.
I powered it off again and then commenced a Safe Boot. Same results as
before.
I powered it off again and then started it in Single User Mode. No
problem. I ran /sbin/fsck -fy. No problem.
I typed "reboot" and it rebooted. This time I start it in Verbose mode.
After the preliminary startup code, the system began repeating the same
message lines:
dsFindDirNodes returned -14071, count = 0 count = 2147483646
Couldn't find root user. Sleeping and trying again.
A Google search produced very few results. I don't have a backup
because I inherited this iMac from my 75 year old semi retired father
who wanted a 20-inch Intel iMac instead. I just goof around with the G5
iMac from time to time, and am considering giving it to my little niece and
nephews. It worked great for about a month. I have customized my
user account and the accounts for the little ones, so I really don't
want to wipe the hard drive and reinstall Tiger again from scratch.
I booted from the suspect internal hard drive into single user mode.
I ran /sbin/fsck -fy on the internal hard drive.
All tests passed.
I ran fsck_hfs on the internal hard drive.
It returned a message that stated that I needed
to add additional information.
I ran fsck_hfs with several switches enabled, but
it continued to return this message.
I performed the procedures in Apple's article 107210
"Mac OS X, Mac OS X Server: How to Replace the NetInfo
Database (Restoring from defaults).
This did not solve the problem.
I booted this computer from my external Firewire hard drive that I use
to create nightly backups on my G4 iMac using SuperDuper!.
I ran Disk Utility Repair Disk Permissions on the
internal hard drive.
There were no permissions errors.
I ran Disk Utility Repair Disk.
All tests passed.
I ran the TechTool Pro Suites --> Advanced Tests on
the internal hard drive.
All tests passed except for "Startup File" which it
listed as " <Not Present>".
The description of this test is:
"This test checks the Startup file. The parameters
within this file contain the information used by
the computer ROM to determine what program will
boot the computer as well as other system-specific
aspects."
I ran the TechTool Pro Performance --> Maintenance
routine on the internal hard drive.
It completed the maintenance successfully.
I ran DiskWarrior on the internal hard drive.
It reported no directory errors, but I replaced it
anyway.
While booted from the external Firewire hard drive, I viewed what
appears to be the proper compliment of folders on the internal hard
drive. Of course, I didn't examine and verify every subfolder in the
hierarchy, however, examining the Applications, Library, System, and
Users folders two deep seemed to indicate that everything was there.
I booted this computer from my Tiger installation disk. I selected
Utilities --> Reset Password... (I think.). It listed only the
Administrator account (root) on the internal hard drive. It did not
list the other three accounts that I created on this hard drive, even
all three respective folders are present in the Users folder. However,
it did list all four accounts on the still attached external Firewire
hard drive.
By every measure, this drive and its directory are sound. I am
concerned that TechTool Pro reported that the Startup File is Not
Present. Beyond the meaning that the words suggest, I'm not sure what
this really means. I checked the Micromat site and found the following:
The Startup File has been defined but not yet
implemented by Apple.
What does the message signify:
dsFindDirNodes returned -14071, count = 0 count = 2147483646
Couldn't find root user. Sleeping and trying again.
Can I effect a simple repair?
Thank you.I think besides a reinstall, only DiskWarrior from Alsoft...
http://www.alsoft.com/DiskWarrior/
stands a chance of fixing it. -
Error: Couldn't find delivery channel for message
Hi All,
In our production environment, we sometime get the following error (Channel Audit Log):
2009-01-12 15:08:47 Error Unable to find channel ID
2009-01-12 15:08:47 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Couldn't find delivery channel for message: 496b9e98-9466-0109-e100-8000ac10a218.
2009-01-12 15:08:47 Error The message status set to NDLV.
This particular interface runs around 100 times a day without any issues, however around once or twice a month we get this error.
This is a synchronous interface.
Could be because of number of threads alloted for Synchronous messages in Visual Admin.
Thanks.Hi XIer
try doing a CPACache Refresh:
Http://<host>:50000/CPACache/refresh?mode=full)
Best regards,
Chris -
couldn't find the adequate forum. I run win 8.1 and the adobe acrobat dc app on my computer doesn't access the doc cloud. I can´t turn the mobile link on. I can access the cloud from my browser, but not from the desktop app. I can access from my mobile app.
Can you please post a screenshot of your Acrobat DC when launched, without opening a PDF?
Thanks,
-Amboo -
After upgrading to iOS5 & everything was restored,I couldn't find the downloaded movies I had before.I kept on syncing it with iTunes.I can see videos are taking up space on my Ipad 2 memory in the iTunes page but it doesn't appear,only songs appear on the Music.thank you in advance for your assistance..
They are now in the videos app!
-
i did follow "From the Apple menu, choose System Preferences. Choose View > Time Machine. Set Time Machine to On if it is off "
. .....but i couldn't find the time capsule from airport utility..... why?Are you using a new 802.11ac Time Capsule - the "tall" one - and are you still using Mac OS X 10.6.8?
You need OS X 10.7.5 "Lion" or later, or an iOS device, to configure an 802.11ac Time Capsule:
http://manuals.info.apple.com/MANUALS/1000/MA1645/en_US/airport_time_capsule_802 11ac_setup.pdf
See page 12. -
I lost the app "app store" on my iphone. How to get it back? I couldn't find a way neither on the iphone mor on iTunes Could you please help me in restore this app? Thanks
The App store is a iOS function and cannot be deleted. Try checking other home screens/folders and see if you can locate it. If not, go into Settings>General>Reset>Reset Home Screen Layout.
-
i couldn't update 10.8.1 to 10.8.2.
The AppStore.app couldn't find the updates about Mo...Lion. Just iPhoto,
and iPhoto couldn't update too, because it depends on osx 10.8.2!!!Do you have one of those newer Macs which require a special update? From other posts, it seems there are now three different OS versions/updates - each one of specific Macs.
I'd call Apple and give them your serial number as well as - important - your build number (click on the Apple and About this Mac; under Mac OS X, click on the numbers until you get to build .......)
Here are two that might be for your model:
http://support.apple.com/kb/DL1603
http://support.apple.com/kb/DL1611 -
After the last update(7.1.2) i couldn't find personal hotspot in my iPad 2.
after the last update(7.1.2) i couldn't find personal hotspot in my iPad 2 Wifi+Cellular. I did everything like reset network setting, restore to factory setting and set up as a new iPad but no change. My iPhone 5's carrier is 16.2 and after update to 7.1.2 it automatically ask me for carrier update but my iPad 2 ask nothing and the carrier is 16.1. Please, help me to solve this problem.
The Personal Hotspot feature is not available on the iPad 2. I have no idea how you could have been using it before as you claim. BTW, your screenshots do not show up.
System requirements
The table below lists the iPhone and iPad (Wi-Fi + Cellular models) capable of Personal Hotspot and which connections they can use to share cellular data with another device:
USB
Bluetooth
Wi-Fi
iPhone 4 or later
✓
✓
✓
iPhone 3GS and iPhone 3G*
✓
✓
iPad (3rd generation or later) Wi-Fi + Cellular
✓
✓
✓
iPad mini Wi-Fi + Cellular
✓
✓
✓
* On iPhone 3G, Personal Hotspot is referred to as Internet tethering.
To connect to a Personal Hotspot, your device requires:
Wi-Fi: Support for 802.11g/n using WPA2 encryption.
USB: Mac or PC with iTunes 9.2 or later installed.
Bluetooth: Mac OS X v10.4.11 or Windows. -
So recently I synced my iPod Classic 160 GB like I did so many times and when I wanted to play some music afterwards it couldn’t find any files on the iPod anymore. However when you look in the settings it displays that ~roughly 90 GB free space is available. Seen the fact that I had about 60 gigs of music this doesn’t seem like a coincidence and I think my music is still somewhere on the ipod but the HDD isn’t recognizing it anymore.
I’ve tried resetting it, and resetting it to factory settings, which didn’t work. When connected to a desktop it won’t be recognized by iTunes, it displays an error message that the iPod cannot be read and that I have to reset it to factory settings.
I’ve spent some time researching this problem yesterday and I ran into a myriad of vaguely similar problems didn’t really offer any help. Currently I’m thinking that formatting the iPod might work, and restoring the software afterwards. However this is a rather bold strategy so I’d like to consult you here first.
Thanks in advance!Hi turingtest2,
Thank you for the info, with formatting my iPod I managed to connect it to iTunes again.
However..in the page you linked to there is a section about how transferring large amounts of data can dump your library. That seems to be the problem in this case. It won't even allow me to transfer more than 2 gigabytes of music per sync, if I go higher it will dump everything again. Having over >60 GB of music in my library, this is disastrous to say the least.
Do you think that there is any other solution besides the method you mentioned involving Smart Playlists? -
Since the new iTunes update 11.3, right after that I couldn't connect my iPod nano 7th G to iTunes. It kept showing me that it couldn't find my ipod, that I had to reinstall iTunes. I did that and still. And now I can't connect my iPhone 5 to iTunes to sync my music. Can anyone please help me ?
Hey zoelevi_13,
Here is an article that will help you troubleshoot this issue with your devices not being recognized by your computer:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
Windows 7 Download error - CDBOOT: Couldn't Find BOOTMGR
I'm downloading Windows 7 Professional from a disc. I downloaded the support software to a USB flash drive using bootcamp, and that all went fine. Then I chose the partition size, put in my Windows 7 disc, it partitioned & rebooted, and I thought it was supposed to boot up to the Windows installation. But it comes up with a black screen with a flashing prompt up in the upper left corner. So then I read on further in the bootcamp instructions & it said if I had problems restart the computer holing the option key, which I did. The screen comes up with the choice to pic MacHD or the Windows CD. I click on the Windows CD & it goes to another black screen, but now up in the upper left hand corner it says CDBOOT: Couldn't find BOOTMGR. So then I talked to an Apple Senior Tech & he told me the Windows disc had to be damaged or no good. So I went to the place I bought it & they gave me another copy. I came home & restarted my computer again holding the option key, selected the Windows CD & the same error comes up! I can't imagine having 2 bad copies of Windows 7. So what could the problem be? PLEASE HELP!!! Thanks!
Do you have any USB drives inserted into the machine at the time of restart? If you have the flash drive that contains the Bootcap drivers plugged in while trying to boot to cd it could cause problems. I know I have run into this exact problem before. I know logically Windows should be able to tell that if a drive doesn't have an OS it shouldn't try to boot to it but Windows is stupid so it doesn't think like a Mac. Just uplug all USB devices except mouse keyboard and External CD Drive if there is one. Makes it easier for Windows. If this doesn't help let us know and we will try to think of somethign else.
-
Itunes update failed on 2 computers, couldn't find msvcr80.dll files.Now have no itunes at all
iTunes update failed on both computers. Couldn't find msvcr80.dll, now I have no iTunes at all. Is it iTunes or the computers?
Beth Trachtenberg wrote:
I did NOT move the other folders (Album Artwork, Mobile Applications, Playlists, Previous iTunes Libraries) or files (iTunes Library, iTunes Library Extras, iTunes Library Genius, iTunes Music Library) that are located inside the Music/iTunes folders.
should be no problem. i'm doing this also.
Everything was working fine on both computers - Consolidated the library on the external drive and did the Change the location of the iTunes Media folder in Preferences on both computers, no problem.
However I added two movies and a few songs to my desktop Mac yesterday - all showed up and played fine after adding them - but when I plug the external drive into my laptop, the new additions don't appear in the library.
if you're purchasing content from the iTMS, you could use _*Home Sharing*_ to automatically add new content to all machines on your local network.
Am I right in guessing that it is because the iTunes Library file on the laptop isn't the same as the one on the desktop computer?
yes.
Is there a way to add them to the library listing on the laptop? If yes, is that something I need to do every time I connect the external drive to the laptop if I've added things from the desktop computer (I never add stuff on the laptop).
basically, yes. however, there's _*Home Sharing*_ and ... see below.
Should I have put the entire iTunes folder - files, folder and media - onto the external drive?
that's one possibility, however, only one Mac @ a time could access that library. there are other options:
*the easy way*
check out TuneRanger.
*the more involved way*
click here for tips/information.
JGG -
Whenever I connect my 4th generation iPod thouch, all of the playlists on my iPod get deleted. This is very frustrating. Someone please help me? I searched the settings on iTunes and couldn't find anything.
Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?
Maybe you are looking for
-
Table to find Shoping Cart Vs Purchase Order
Hi Friends I try to find a table in SRM to see a Shopping Cart and Purchase Order (SC vs PO, subsequent documents) , actually I use BI but is not clear for me Thank a lot!! Regards!!
-
How do I embed YouTube or Vimeo video in an apple mail message
Is there an easy way to embed YouTube or Vimeo video in an apple mail message? I've tried using command+i (same with share feature) on a YouTube page ... looks great except I get missing plugin error on video. I'm up to date on Flash plugin, running
-
Flow of MM & SD modules with Transaction codes and Diagrams., please give the phases of the flow and what are all the tables involved in it.
-
Hi , My V3 job for the Sales Order Item DataSource is Running(R/3) but not picking the Data . I Tried Running the Report RMBWV311 Manually But still no Use. Thanks in advance. Rgds, Ravindra.
-
Can you import Edge Animate projects into Muse? If you can, please explain. Also when setting up your page, and you select 2 columes, can you use the 2nd one for like a frame for other pages to open into? Thanks for help.