Create Form not picking up all of the PDF checkbox fields.

I am using MS Word 2010 and Acrobat Pro X.
I have a Word template with a series of content control checkboxes that I am converting to PDF. Then I'm using Acrobat "Create Form" function to create a form with interactive checkboxes.
The checkboxes that are NOT indented in the Word template are getting picked up by Acrobat. Checkboxes that ARE indented are not getting picked up.
Can anyone tell me why or what I might do to correct this issue?
Thanks.

Thanks for the response. OpenOffice isn't really an option. I love that suite, and I use it at home, but my company is knee-deep in Microsoft Office. Have to be a good soldier, for now anyway.
As far as checkbox dependency, I was thinking I could write some javascript to sort through all the checkboxes in the form and make them all independent. Can you tell me which attribute or property I should be searching for?
As I wrote before, I need to get this to a point that it can be automated.
Thanks again.

Similar Messages

I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Hello al!
I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe>

I'm picking up all of the data script related to the sending / receipt of an e-mail along with the e-mail itself and can't find a way of not showing the text. Obviusly only a command but can't find it!

I'm picking up all of the data script related to the sending / receipt of an e-mail along with the e-mail itself and can't find a way of not showing the text. Obviusly only a command but can't find it! Help!

Shift-Command-H is the key-combo to switch 'Long Header'/'Standard Header' .
Long way: Top Menu -> View -> E-Mail
Stefan

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Hello. I have adobe forms and received the alert that it will be ending in July. Then I received an email about Adobe Acrobat XI Pro which can create forms. I signed up for the free trial and when I began to make a new form it brings me back to Adobe Form

Hello. I have adobe forms and received the alert that it will be ending in July. Then I received an email about Adobe Acrobat XI Pro which can create forms. I signed up for the free trial and when I began to make a new form it brings me back to Adobe Forms. My question is, when Adobe Forms ends on July 28th will Adobe Acrobat XI Pro be able to create forms or will it now? and if not, then why is adobe advertising for it still?

What you're calling "Adobe Forms" is really Adobe FormsCentral. The FormsCentral service is indeed going away soon, but you can always create PDF forms (AcroForms) with Acrobat. Acrobat also comes with a desktop version of the FormsCentral desiger, which can be used to create simple PDF forms that can be used apart from the FormsCentral service. So you'll no longer be able to create and host web forms with the FormsCentral service or use PDF forms with the FormsCentral service. You will be able to create standalone PDF forms with Acrobat and simple PDF forms with the FormsCentral desktop app.

Can a user editable frame be created for "Notes" and emailed from within the app?

Hello,
I am super new to the digital publishing process. Our church has published devotional content for some time and this year we are taking those publications digital. One of the key aspescts to our design is for readers to be able to have space to write their own thoughts in the devotional.
I am not at all skilled in any sort of code or markup and I have tradtionally stuck to the visual side of production. So, I am wondering if there is a way to create a "Notes" frame within indesign that the user can email to themselves or save it in someother way from with in the app?
Below is a screen shot of the print edition so you can see the area I am refering to.

The CLASSPATH cannot be modified at runtime.
You can work around this by creating a URLClassLoader with the required CLASSPATH and using it to load your classes instead.

Revaluation not picking up all documents

Hi
The revaluation program is not picking up all foreign currency GRIR documents. I've checked and the exchange rates are different and the items are open, but when we run the revaluation program it skips certain documents. Has anyone ever come accross this issue?
Thanks

I think that you posted this on the wrong forum. This is the asset accounting forum. Revaluation usually refers to the revaluation of assets. I think that you are asking about currency revaluations. You shold post your question in the correct forum.

Reply all not picking up all email addresses

On a mail list email when I hit "Reply All" Mail app does not pick up all email addresses when composing a response to a non subscribed user. This also happens when using web mail in Safari. No problems on iMac.

last step on the process is a factory restore through itunes to see if its a software glitch, if that doesnt solve it, you iphone may need service
iTunes: Restoring iOS software

WRT54GX2 does not pick up time from the network...

I have a WRT54GX2 running firmware 1.01.14 and it does not pick up time from the network. I have PacBell (now AT&T) as an ISP and a DSL link. My old Netgear router picks up the time immediately. I am trying to figure out if I have a defective unit or if this is a firmware bug. Without the time, I can not use any of the scheduling functions, nor measure uptime.
Does anyone have this router with the time working? I have set the appropriate time zone.
Thanks,
Martin

mneiman wrote:
Thanks for you ideas.
The backup file appears to be binary. However in searching through it I did see 3 time related text strings, namely: clock.stdtime.gov.tw, time-b.nist.gov and time.nist.gov. I can successfully ping clock.stdtime.gov.tw and time.nist.gov. This reinforces my belief that my ISP (AT&T nee PacBell) is not blocking access.
however ntp works on TCP port 123. ping works on udp 7 afaik. if your old netgear works i guess this is a router problem.
have you reset the router yet? afaik press reset button for 10 seconds.
you will however loose all settings and need to enter them again. it may however fix the issue.Message Edited by linksysinfo on 07-09-2006 03:09 AM
Regards Simon
NAS: TS-459 Pro - 3.6.1 Build0302T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
QPKG: WordPress 3.4, TwonkyMedia 6.0.39 QPKG - Zenphoto1.4.2.1 [7802] - phpMyAdmin v3.3.10
Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.4.13, Cisco SLM2008, Dlink DSM-520, Xbox360

HT5654 Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

TS3694 I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

I have a new Iphone 5, my wife has a 4S and an iPod Touch. When I sync my new 5 to the Mac, it pick up ALL of the stupid game apps that my wife uses on her two devices. How can I keep them separate?

I have a new Iphone 5, my wife has a 4S and an iPod Touch. When I sync my new 5 to the Mac, it pick up ALL of the stupid game apps that my wife uses on her two devices. How can I keep them separate?

go to itunes preferences, store, uncheck automatic downloads. also when your phone is connected you can click on apps and only check the ones you want on your phone, go down to the bottom right and click apply.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards.

I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix

I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix issues I had fixed in the single files. I need suggestions on what else can be done if any. Using Acrobat pro XI.

Out of habit, I tend to combine PDF files in the Page Thumbnails pane by right-click then "Insert Pages" -> "From File". For me, this preserves the tags from both documents, although the tags may have to be moved into the right location (if I recall correctly the tags for the inserted pages get put at the end of the tag structure, regardless of where the pages are inserted), If I first put the tags for the document to be inserted inside a container tag like Section, it makes the process easier. Moving that set of tags to the right place is the only re-fixing that I recall having to do. What behavior are you experiencing?
a 'C' student

In logic X I am trying to normalize but the track and file option in the edit window is not there at all just the drop down for pointer eraser etc. Any ideas? Thanks!..

In logic X I am trying to normalize but the track and file option in the edit window is not there at all just the drop down for pointer eraser etc. Any ideas? Thanks!..

Total life saver. Thank you

Create Form not picking up all of the PDF checkbox fields.

Similar Messages

Maybe you are looking for