Creation of master data info object- data coming form a 3rd party system

Hi All
i need to create a master data info - object which connects the customer and the corresponding plant..actually thios data is coming from a third party system and they have maintained 2 tables one for customer and one for the plant details and these 2 tables are connected through some common id which populates unquie id for each customer and is maintained in the plant table with the same id...now both these tables have to be merged together and to be cretaed as a single info object..can any one suggest me as to how to proceed with it.
Regards
Shilpa

Hi,
Create a Z-InfoObject with the same format as is used in your 3rd party system for the commonid.
Add Customer and Plant as navigational Attributes.
Create an infosource with these three fields.
Unload (in a CSV-file) the commonid with customer and plant from your 3rd party system.
Load these data to BI into your newly created Z-commonid InfoObject.
Success,
Udo

Similar Messages

No master data info objects' attributes in infoset

Hi All,
I am trying to create an infoset out of two ODSs. When I tried to create a report on this infoset, I cannot see the attributes of the master data info objects. What to do at this point?
Regards,
Mike

Ok now I am confused.
1. Replicate data source: these are all z objects. And it is a flat file extraction . In the Q system , when I go to source system tab and right click on the BW Q System , I can see replicate data source. Is that the point that you are talking about?
2. Should I transport the transfer rules ?
Thanks
Message was edited by: Pooja Mittal
Message was edited by: Pooja Mittal
Message was edited by: Pooja Mittal
Message was edited by: Pooja Mittal

Secure an attribute of a Master Data Info Object

Hello,
We would want to secure one of the attributes of the Master Data InfoObject. For eg. In Material master data info object, we have price as an attribute. We would like to impose a field level security on the price field.
Anyone please let me know how we can do it ...

Steps:
1. Make the info object authorization relevant. RSA 1- info object in change mode and in bex tab therw will be a check box and check that to make it authorization relavant.
2. go to RSSM - create an authorization object.
3. In PFCG, set the values for this object.
4. Whereever this object is sued, the system will check for authorizations.
Ravi Thothadri

Reg: No enries in SID table of attribute of a Master data info object

Hello SAP Gurus!!!
I Hope everyone is doing good.
I found some issues , when i loaded master data into master data info object in sap bi.
I have an object which is holding master data (master data info object)---ZEMPID(employee id)
I have attributes for this object are : Emp name , Emp Phone number
I loaded master data attributes into ZEMPID. I could see some entries in SID table of ZEMPID char info object .
But i am unable to see the entries in SID table of Emp name , which is a attribute of master data info object.
According to my knowledge whenver we load data into sap bi , automatically sid values will get generated for that characterstic info object.
so here in this case Emp name is also a char info object , so whenever we load the data into master data info object , we have to see the entries in SID table of Emp name also .But i am unable to see the entries in the SID table of Emp name. .
So what might be the problem ?
Awaiting for your valuable answers!!!
Cheers!!

Hi Rajavamshi,
You are right whenever we load data in BI, it will create SIDs for info objects.
But it will create SID in 'S Table' not in X/Y - Table.
If master data is enabled for Emp name then it will create SID in X/Y table. I think the master data is not enabled for attribute(Emp Name).
Please check in S Table, the SIDs will be there.
If it is not the case, activate the attributes info objects and EMPID info object and load the master data and run ACR for EMP ID.
If it is not working still, then do master data check in RSRV.
Regards,
Vignesh.B

Key figure - master data info object

I have been asked to create a master data info object for the object "users" and this is this how the data looks like in the flat file. The object users is a key figure. Can I create a master data object for key figures. Let me know , if I am missing something.
State----Grade Level----users
AL--0--
53,520
AL--1--
57,423
AL--2--
56,172
AL--3--
57,859
Thanks

Hi Pooja,
You cannot create master data for a key figure. You can include a key figure as an attribute for another characteristic though. If you need to store values that are in the form of numbers, you can create your char of type NUMC.
Please let us know more about your scenario so that a better solution may be proposed.
Hope this helps...

Master data info object - duplicate records

Hi All,
I have a flat file which has department data that looks like this
0     OTHER
0      00 Other
1      01 Language Arts
2      02 Mathematics
3      03 Reading
4      04 Social Studies
5      05 Science
6      06 Student Success
7     07 Write Traits
1     READING
2     LANGUAGE ARTS
3     MATHEMATICS
4     SCIENCE
5     SOCIAL STUDIES
50     50 Profesional Development
6     BUSINESS EDUCATION
65     65 FRABOOMERANG
7     FOREIGN LANGUAGE
75     75 KA Software Product
8     Legacy = 8: No Description
80     80 CCI
89     89 Money Only EDC Wrkshps
9     GENERIC
99     99 Money Only Miscellaneou
I was asked to create master data info object for this. I created it but when I am loading it , I am getting an error that there are duplicate records.
What should be done? Will such data be still created as master data or an ODS ? Because there are duplicate records.
Thanks

Hi Eugene and Bhanu
I have the same issue. I have this master data flat file, with 2 fields . I am trying to load it . And the data looks like this
0----
1----
001 Work'g Words Spelling
2----
002 Vocab for Achievmt
3----
003 ETS95 Packets Program
4----
004 Every Day Counts
5----
005 Phonics We Use
6----
006 US94 History of US
7----
007 Masterng SAT 1/PSAT
I tried Bhanu's suggestion of ignoring duplicate records . I did not get any error but that I lost some data. So I tried Eugene's suggestion of shifting the fields .. I moved the second field to the frist place and saved and loaded it. I got this error.
"There are duplicates of the data record 2. with the key '3.' for characteristic 1.."
Any suggestions.
Thanks

Info-Object data not appearing in Multiprovider

Guys,
I got a problem here. I have created a multiprovider based on master data and cube. My master data has certain attributes which are not present in the cube. I want to display data for those fields in the multiprovider.
I can see cube data in the multiprovider view but i don't see any data coming from the master data info-object. 0INFOPROV shows only cube name.
Is there something i am missing or any setting that i need to do ?
Points will be awarded to the helpful answers.
Thx,
Soumya

Hi All,
Multiprovider always has issues when you are trying to link two objects vary in their structure. Lets say if you are creating a multi-provider on a ODS object & Cube or Cube & Info-object. Lets say CHAR X is available in Cube and not in ODS or master data.
Any selection on char X will not fetch you any record from ODS / master data as it is not available in ODS / master data. You need to add the characteristic to ODS / master data and update the same way as you are updating it in the cube. Otherwise don't make any selections based on this characteristic.
Hope it helps.
Thanks
Soumya

Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

Hi SAP Guru´s,
Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
This creates more issues at the store end as well as affecting business.
We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
Thanks in Advance.
Thanks & Regards,
P.P.Shankar

Hello Shankar,
Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
See if it helps. The best option would still be that the 3rd part system considers the activtion date.
Kind Regards
Kaizad

Extraction of data from ECC to 3rd Party systems

Hi All,
I want to know all the options available for extracting data from ECC to a 3rd party system (custom datawarehouse like Teradata, hyperion etc). Also, I want know if there is a best practice documentation available for extraction of data from ECC to any 3rd party system?
Thanks,
SB.

Hi SB,
Check the following link
http://expertisesapbi.blogspot.com/2010/06/how-to-transfer-data-from-sap-system-to.html
Ranganath.

Distribute different versions of data to 3rd party systems from SAP ERP2004

Dear fellow SDN users
I am working in a large retail company where we are about to implement a new store system. The new system should be implemented in phases, where each phase covers one or multiple countries. Until the implementation is complete, our old store system should still be supported.
My problem is that we also need to support multiple versions of the systems, which is something we have never done before. Do any of you guys have any experience in how to differentiate versions of the data being sent from SAP to 3rd party systems? The scenario today is:
SAP ECC 6.0 -> SAP PI 7.0 -> STORE SYSTEM1
And the scenario we would like in the future:
SAP ECC 6.0 -> SAP PI 7.0 -> STORE SYSTEM1/STORE SYSTEM2
(Where it is possible to send several versions of data: e.g. ARTMAS ver. 1 to SYSTEM1 and ARTMAS ver. 2 to SYSTEM1 and ARTMAS ver. 1 to SYSTEM2)
The first thing that came to my mind was to differentiate on IDOC extension and then program different routines per extension when sending the idocs, but I guess there should be an easier way.
Any idea is greatly appreciated.
Best regards,
Chris

Hi Chris
I guess it depends on how the information you want to send to various partner systems differs, but have you considered using reduction?
I am at a client currently where we need to send similar information to a number of systems - for example Customer information using the DEBMAS message type, is going to three seperate systems.
To do this we defined 3 reduced messages - Tcode BD53. This not only reduces the load placed on PI/whatever middleware system is used by eliminating unnecessary data from each message variant, but allows the message to be treated differently by PI, using different data mappings, distribution models etc.
Hope this helps

Recipe data migration from 3rd party system to SAP Recipe Management

Dear All,
Can anybody give the steps to be followed to upload Recipe data from a 3rd party system into the
SAP Recipe Management (RM). I am looking for the logical process to populate the RM tables.
Thanksa lot in advance,
Regards,
Achyuta

As I known , there is a interface tool named as IDOC.For more information , please ask your abap team.

I would like to know if I can have FCP maker names be the same as what appears in field, master comment 1. I am importing these makers from a 3rd party system

Hello, I am importing logs from from a 3rd party system. They come in as markers into FCP. The log comments come in under master comment 1. Is there a way to re-map this so master comment 1 appears where the maker type is shown.

That's like the 00-th post that asks for the same thing: digital connection of the Creative soundcard to a receiver.
Yes, you can connect the card via a jack situated on the back of the card - you just need a cable with stereo minijack and RCA. All the older Creative cards (since Li've!) have that SPDIF output on the back, on the form of a mini-jack. It is labeled as "digital".
The ONLY problem is that you will be able to send surround sound via SPDIF only if it is encoded DD or DTS on a DVD-ROM. The card itself will not encode surround sound CREATED in the PC. So, games, mp3's, CD's all will be stereo PCM. I guess that your old MoBo SPDIF was in the same situation (except for a SoundStorm integrated from nVidia that does DD 5. encoding on the fly). If you don't care about gaming performance, Turtle Beach make a card that does DolbyDigital encoding on-the-fly - they are calling this Dolby Digital Li've.
About mikes: one mike input is existing on the back of the card, and another one on the expansion bay (if you have platinum version). both of them will take only a el-cheapo (electret/condenser mike), not a proffesional one.
Message Edited by SoNic2367 on 04-24-2006 2:47 PM

How to find master data info objects. Partner function and customer class.

hi,
Can you please tell me what are the available extractors for Partner Function (PARVW from VBPA)and Customer Class (KUKLA from KNA1).
I hope these fields are master data. I checked in 0customer. But I didn't find it. There is a info object (Business partner). Is it the same?
pls reply

I will admit that I am not familiar with ECC and there may be different interpretations of what KUKLA means and different means of extracting Customer information to/from ECC.
However, for us, when extracting Customer Attributes using the 0CUSTOMER_ATTR datasource in R/3, we map KUKLA to 0CUST_CLASS. They are both set up as 2 CHAR. That is not to say that you should also. You can map it to a custom infoobject in BW as long as you set it up as an attribute of 0CUSTOMER. KUKLA is available in the standard datasource 0CUSTOMER_ATTR in R/3. When looking at what is available in the infosource for 0CUSTOMER in BW, 0CUST_CLASS is a logical choice to map.
As far as VBPA-PARVW, VBPA is not a source for master data for 0BPARTNER. VBPA contains the business partners associated with Sales documents. So if you are going to create a data provider (cube/ODS) in BW and VBPA-PARVW is part of the transactional datasource in R/3, the you can map it to 0BPARTNER in your cube/ODS.
Hope this helps.

Master Data Info Object is not updating Attribute data

Dear Sdns,
We are loading master data to ZCOMP_GL Info object through flat file extraction... ZOMP_GL have four attributes.. Leaving three of the attributes Only one of the attribute which is CS_ITEM holds the data.
We loaded data ffrom flat-file.. It laoded sucessfully upto the PSA and data is available... And when we runned DTP the load was successfull.. In the manage screen of the Info object it shows the records are added successfully.. But when we see the data in ZOMP_GL. We are not able to see the Data for CS_ITEM which is attribute.... Also we runned Attribute change run..
Kindly Advice me..
Warm Regards,
Aluri

Activate the data in the info object.
Ravi Thothadri

BPS Web New master data (info object value) added to planning area

Dear all,
I am working with BPS in Web.
Here you can add lines.
Request:
The user wants to add a new value of the lead column, ´
which is not yet active in the master data of the info object envolved here.
He simply wants to enter the new value in the opened new line and the
system should store(add) that value to the master table,
so that he could directly plan KF values to that new line.
I know that we can use FM 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
to post directly new values to the bespoken info object.
Where and how could I add this function to the process.
Note:
It seems that the BSP dispatcher doesn't pass that line
because the "invalid" line is rejected in a step before ??
Many thanks for your help in advance !
regards
Paul

Vlad,
Transaction RSD1 gets you into infoobject maintenance and it more or less equivalent to RSA1 and infoobject althought they have some better listing facilities for infobject in infocubes than RSA1.
Paul,
Are you really sure you want to give your users the ability to create new master data without any validation and potentially compromising your data quality and data integrity?
Sometimes in BPS you have to ask whether or not you should even though you could...

Creation of master data info object- data coming form a 3rd party system

Similar Messages

Maybe you are looking for