Upgrades consistently failing...
Every upgrade from Adobe is failing to run. I need some support. What I'm dealing with seems so insain I spent the last few days looking for some kind of malware problem. I've scanned my system with multiple tools and can't find anything. Acrobat, Photoshup, Flash, the installer all fail to update!!! I'm also seeing that upgrades to Java are failing. The errors provide no real details, most of them come back as permission errors to a file or a directory in the installation. In the case of the Acrobat - it goes through the install and before completing rolls back the install, providing nothing useful in the way of information.
I tried the cleaner on the installer, then on Photoshop, and finally cleaned the entire CS6 suite and am reinstalling all the apps... And I just tried to do an upgrade to Acrobat (not sure why there's an upgrade when I just installed this version) and it fails.
This is eaten up too much time. I'm at a loss, extremely frustrated and ready to drive to Walmart to see if they are hiring greeters. This is not normal, eating into my ability to finsih projects and not how I want to spend my time. Please help.
You do not tell us anything about your system or give specific error messages. However, you are also having problems installing non-Adobe software. This could be an issue with a virus or it could be an issue with a broken Windows Installer program (but we do not know you are running windows), it could be a permissions issue.
Similar Messages
-
HP Envy dv7 - Windows 8.1 upgrade consistently fails
I have been trying for several weeks to upgrade my Envy dv7 laptop, and after spending several hours it eventually fails, popping up a message about failure 0xC1900101 - 0x40017. I am then forced to wait an extended time for this upgrade process to restore my previous version. As a result of this exercise I lose my laptop for 6-8 hours. Apart from the above message no useful information about exactly what failed is presented, which is infuriating because if I knew what was clobbering the upgrade I might be able to fix it - this laptop is rich with development tools and upgrades which might not be installed on a typical laptop, so I presume one of those might be causing problems. However all service packs and updates have been installed and unless Microsoft tell me what is causing the failure then I have zero chance of upgrading. The upgrade process goes thru a reboot and then a lengthy period with a 'Setting up' message gradually climbing to 100%. The failure occurs late in the process of 'Saving PC configuration'. From the appearance it looks as though the upgrade goes 99% of the way before failing.
I tried, and once again suffered an epic fail. I just wasted another 5 hours. The upgrade process went all the way through, then a failure was detected on boot up. It tried again, same result, so without giving me any choice it automatically installed my previous operating system. Then on boot up it shoved a big message in my face telling me how sorry they were that the upgrade failed. This is absolutely infuriating. I consider this upgrade process to be a monumental failure by Microsoft. Not because of the failure itself because I can accept things do fail - but of the complete lack of information provided about what caused the failure. Microsoft are not giving me any chance of being able to resolve this issue by understanding what is causing these failures. All I get is unhelpful messages saying FAILED. Why is it so difficult for the upgrade process to record a log file as it goes thru the process? What p's me off is that my Windows 8 continually pesters me to upgrade to Windows 8.1. When I try, it fails- treating me like the village idiot by withholding information about what is causing the failure. I've no idea why Microsoft would want to withhold such information. So far I have tried 3 times to do this upgrade, and probably spent the best part of 24 hours not being able to use my laptop whilst Microsoft's hopeless operating system upgrade fails. I now have a very expensive HP laptop which will shortly become a brick due to my not being able to upgrade the operating system - in due course Microsoft will withdraw support for Windows 8 and I won't be able to do any upgrades. Very unhappy user here.
-
Windows 8 Upgrade Assistant failed on Satellite P775
I tried running the Windows 8 Upgrade Assistant on my Satellite P775.
It started by displaying
Checking Components; download Windows 8 Components data.
Reading Components.
Got component TOSHIBA Wireless LAN Indicator
... etc ...
Got Component TOSHIBA Contrasena de supervisor
Reading Windows Components.
then displayed a Message Box
"Failed to read Target (Windows 8) INI file."
How can I solve this?
ThanksThanks for the reply.
Yes I followed that procedure.
My model is Satellite P775-112 PSBY3E and is listed as being compatible
After installing Windows 8, I noticed that the DVD drive was no longer accessible, as described in the following thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68222&tstart=0
So I disabled the Windows Service "Toshiba Optical Disc Drive Service" (TODDSrv.exe 1.0.0.8), and the DVD drive is now visible. However Toshiba Video Player still does not work (says it has compatibility issues) and I can not view DVD videos.
I then ran the Windows 8 Upgrade Assistant, which failed immediately with the error "Failed to read Target (Windows 8) INI file".
I found some posts on the forum with a similar error with the Windows 7 Upgrade Assistant (Failed to read Target (Windows 7) INI file. None of the posts has a clear description of what this error means but I've tried all of the suggestions.
Here's a list of what I've tried:
- Rebooted
- Upgraded BIOS to latest version (2.10)
- Run Upgrade Assistant as Administrator
- Run Upgrade Assistant with "Toshiba Optical DIsc Drive Service TODDSrv.exe 1.0.0.8 started or stopped.
My main problems at the moment are:
- Toshiba Optical DIsc Drive Service causes DVD drive to disappear
- Toshiba Video Player won't run
- No way to view DVDs
I'd be happy to install the drivers and applications individually if the Upgrade Assistant doesn't work - is there anywhere I can download them? -
I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!
Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems. -
When i was waiting for an hour for itunes to grading my 2nd generation ipod touch to a 4.2.1 and it was about done, it suddenly said the network connection timed out and that made the upgrading a fail. Why does it do that? and what does it mean?
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
Performance counter registry hive consistency failed
Hi everybody,
i just bough a tablet from China running Window 8.1 32 bit os sytem.
i tried to install sql server 2008 rs but i got this error, performance counter registry hive consistency failed
i tried to google the result but i got stuck.
i open the registry and under Peflib i have following folders
_V2Provider
009
0804
currentlanguage
under the 009 and currrenlanguage i can see counter and help
but under _V2Provider and 0804 it was emthy, i was trying to find the way to copy it from other folders but i dont know how.
please help me to solve this problem so i can go on installing the sql 2008r2
thanksHello,
Please try the solutions and workarounds contained on the following resources:
http://www.thewindowsclub.com/performance-counter-registry-hive-consistency-check
http://cc.bingj.com/cache.aspx?q=http%3a%2f%2fwww.thewindowsclub.com%2fperformance-counter-registry-hive-consistency-check+&d=4716481039762124&mkt=en-US&setlang=en-US&w=DuZLAhe5tCpgzrvY7gDTglyZBBlX52os
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
My phone will not turn off, has not done so for ages, Today I tried to upgrade which failed . Now my screen shows only the itunes symbol and a usb lead. When I connect to itunes it informs me the sim card is not supported though it works on other phones. HELP
Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message. -
WRT54GL v1.1 firmware upgrade: "upgrade are failed"
I am trying to upgrade my WRT54GL v1.1 firmware. I have downloaded a file called FW_WRT54GL_4.30.13.016_US_EN_code.zip, which I have unzipped to yield a file with a .bin extension. I am using the web interface to upgrade the firmware with the .bin file and get the error message "Upgrade are failed" very late in the upgrade process. I have tried resetting the router by holding the reset button for 30 seconds, but this doesn't help. I am using Safari on a Macbook Pro running Snow Leopard 10.6.2. Any help is greatly appreciated.
Solved!
Go to Solution.Thanks for the tip. I took the router to a friend's house and upgraded the firmware with his peecee running Windows XP and a recent version of Firefox. Rather disappointing that mac support is so poor.
-
Upgrade are failed!; WRT54G_v2
130228_1900est
hello,
just troed to update FIRMWARE re our WRT54G_v2
current FIRMWARE
Firmware Version: v3.37.7
downloaded and tried to run
130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
BUT got msg'
Upgrade are failed!;
WHAT'S WRONG?
Thanks,
Steveg722
USA_RI_02917
Solved!
Go to Solution.130301_0242est
@jlbjlb
seems the link you put is simply the procedure to upgrade the ROUTER FIRMWARE
I am following steps to do what CISCO calls a MANUAL UPGRADE (downloaded the .bin file for WRT54G_v2; Open ROUTER Setup; Go to FIRMWARE UPGRADE; browsed to the .bin file; hit UPGRADE)
THIS TIME, reset then powered down then up the ROUTER
tried to to run the upgrade again but AGAIN, Upgrade are failed!
Does anybody know what the problem is her and how I can get the FIRMWARE updated?
Hope so. -
hi all,
while attaching content database to SharePoint 2010 I am getting this error. Please help me to solve this issue.
[powershell] [SPContentDatabaseSequence] [ERROR] [2/26/2014 6:58:44 PM]: Action 4.0.32.0 of Microsoft.SharePoint.Upgrade.SPContentDatabaseSequence failed.
[powershell] [SPContentDatabaseSequence] [ERROR] [2/26/2014 6:58:44 PM]: Exception: The Database ID 7, Page (1:12779100), slot 1 for LOB data type node does not exist. This is usually caused by transactions that can read uncommitted data on a data page. Run
DBCC CHECKTABLE.
[powershell] [SPContentDatabaseSequence] [ERROR] [2/26/2014 6:58:44 PM]: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteNonQuery(SqlCommand command)
at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.ExecuteDataDefinitionMethodCore(SqlSession sqlSession, ISqlSession isqlSession, String sqlscript, SPLog log)
at Microsoft.SharePoint.Upgrade.AlterToNewLOBType.Upgrade()
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
[powershell] [AlterToNewLOBType (4.0.32.0)] [DEBUG] [2/26/2014 6:58:44 PM]: Begin Rollback()
[powershell] [SPContentDatabaseSequence] [ERROR] [2/26/2014 6:58:44 PM]: Action 4.0.32.0 of Microsoft.SharePoint.Upgrade.SPContentDatabaseSequence failed to rollback.
[powershell] [SPContentDatabaseSequence] [ERROR] [2/26/2014 6:58:44 PM]: Exception: This SqlTransaction has completed; it is no longer usable.
[powershell] [SPContentDatabaseSequence] [ERROR] [2/26/2014 6:58:44 PM]: at System.Data.SqlClient.SqlTransaction.ZombieCheck()
at System.Data.SqlClient.SqlTransaction.Rollback(String transactionName)
at Microsoft.SharePoint.Utilities.TransactionalSqlSession.Rollback()
at Microsoft.SharePoint.Upgrade.SPDatabaseAction.Rollback()
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()hi Eric,
Thanks for your reply. using the system_health Extended Events session I got following error.
<RingBufferTarget eventsPerSec="200" processingTime="40" totalEventsProcessed="8" eventCount="8" droppedCount="0" memoryUsed="81220">
<event name="error_reported" package="sqlserver" id="100" version="1" timestamp="2014-02-26T11:33:07.028Z">
<data name="error">
<type name="int32" package="package0" />
<value>17830</value>
<text />
</data>
<data name="severity">
<type name="int32" package="package0" />
<value>20</value>
<text />
</data>
<data name="state">
<type name="int32" package="package0" />
<value>11</value>
<text />
</data>
<data name="user_defined">
<type name="boolean" package="package0" />
<value>false</value>
<text />
</data>
<data name="message">
<type name="unicode_string" package="package0" />
<value>Network error code 0x2745 occurred while establishing a connection; the connection has been closed. This may have been caused by client or server login timeout expiration. Time spent during login: total 292 ms, enqueued 290 ms, network writes 0 ms, network reads 0 ms, establishing SSL 2 ms, negotiating SSPI 0 ms, validating login 0 ms, including user-defined login processing 0 ms. [CLIENT: 172.16.20.47]</value>
<text />
</data>
<action name="callstack" package="package0">
<type name="callstack" package="package0" />
<value>0x0000000000CEDC3E
0x000000000048BC65
0x000000000048BA60
0x00000000024AEE2E
0x000000000179DD7E
0x0000000000A5FF35
0x000000000045CCA8
0x0000000000A5AA42
0x000000000081FB5A
0x000000000041BBD8
0x000000000041B8BA
0x000000000041B6FF
0x0000000000938FB6
0x0000000000939175
0x0000000000939839
0x0000000000939502</value>
<text />
</action>
<action name="session_id" package="sqlserver">
<type name="uint16" package="package0" />
<value>0</value>
<text />
</action>
<action name="sql_text" package="sqlserver">
<type name="unicode_string" package="package0" />
<value>Unable to retrieve SQL text</value>
<text />
</action>
<action name="tsql_stack" package="sqlserver">
<type name="unicode_string" package="package0" />
<value>Unable to retrieve T-SQL stack</value>
<text />
</action>
</event>
<event name="error_reported" package="sqlserver" id="100" version="1" timestamp="2014-02-26T13:28:44.189Z">
<data name="error">
<type name="int32" package="package0" />
<value>7105</value>
<text />
</data>
<data name="severity">
<type name="int32" package="package0" />
<value>22</value>
<text />
</data>
<data name="state">
<type name="int32" package="package0" />
<value>6</value>
<text />
</data>
<data name="user_defined">
<type name="boolean" package="package0" />
<value>false</value>
<text />
</data>
<data name="message">
<type name="unicode_string" package="package0" />
<value>The Database ID 7, Page (1:12779100), slot 1 for LOB data type node does not exist. This is usually caused by transactions that can read uncommitted data on a data page. Run DBCC CHECKTABLE.</value>
<text />
</data>
<action name="callstack" package="package0">
<type name="callstack" package="package0" />
<value>0x0000000000CEDC3E
0x000000000048BC65
0x000000000048BA60
0x0000000000E1F5D0
0x00000000008105B6
0x000000000080F5D8
0x000000000080F2A6
0x00000000022F292D
0x0000000000C60883
0x000000000055D558
0x000000000055D0C7
0x000000000055CF1C
0x0000000000560365
0x0000000000560286
0x000000000055FD36
0x00000000005600F9</value>
<text />
</action>
<action name="session_id" package="sqlserver">
<type name="uint16" package="package0" />
<value>54</value>
<text />
</action>
<action name="sql_text" package="sqlserver">
<type name="unicode_string" package="package0" />
<value>UPDATE [dbo].[AllDocs] SET WelcomePageParameters = CASE WHEN WelcomePageParameters IS NOT NULL AND CONVERT(ntext,WelcomePageParameters) IS NULL THEN NULL ELSE WelcomePageParameters END,MetaInfo = CASE WHEN MetaInfo IS NOT NULL AND CONVERT(image,MetaInfo) IS NULL THEN NULL ELSE MetaInfo END,UnversionedMetaInfo = CASE WHEN UnversionedMetaInfo IS NOT NULL AND CONVERT(image,UnversionedMetaInfo) IS NULL THEN NULL ELSE UnversionedMetaInfo END,BuildDependencySet = CASE WHEN BuildDependencySet IS NOT NULL AND CONVERT(image,BuildDependencySet) IS NULL THEN NULL ELSE BuildDependencySet END,FileFormatMetaInfo = CASE WHEN FileFormatMetaInfo IS NOT NULL AND CONVERT(image,FileFormatMetaInfo) IS NULL THEN NULL ELSE FileFormatMetaInfo END WHERE datalength(WelcomePageParameters)=0 OR datalength(MetaInfo)=0 OR datalength(UnversionedMetaInfo)=0 OR datalength(BuildDependencySet)=0 OR datalength(FileFormatMetaInfo)=0 ;UPDATE [dbo].[AllDocStreams] SET Content = CASE WHEN Content IS NOT NULL AND CONVERT(image,Content) IS NULL THEN NULL ELSE Content END WHERE datalength(Content)=0 ;UPDATE [dbo].[AllDocVersions] SET MetaInfo = CASE WHEN MetaInfo IS NOT NULL AND CONVERT(image,MetaInfo) IS NULL THEN NULL ELSE MetaInfo END,Content = CASE WHEN Content IS NOT NULL AND CONVERT(image,Content) IS NULL THEN NULL ELSE Content END WHERE datalength(MetaInfo)=0 OR datalength(Content)=0 ;UPDATE [dbo].[AllLists] SET tp_Fields = CASE WHEN tp_Fields IS NOT NULL AND CONVERT(ntext,tp_Fields) IS NULL THEN NULL ELSE tp_Fields END,tp_ContentTypes = CASE WHEN tp_ContentTypes IS NOT NULL AND CONVERT(ntext,tp_ContentTypes) IS NULL THEN NULL ELSE tp_ContentTypes END WHERE datalength(tp_Fields)=0 OR datalength(tp_ContentTypes)=0 ;UPDATE [dbo].[AllWebParts] SET tp_View = CASE WHEN tp_View IS NOT NULL AND CONVERT(ntext,tp_View) IS NULL THEN NULL ELSE tp_View END,tp_Source = CASE WHEN tp_Source IS NOT NULL AND CONVERT(ntext,tp_Source) IS NULL THEN NULL ELSE tp_Source END,tp_AllUsersProperties = CASE WHEN tp_AllUsersProperties IS NOT NULL AND CONVERT(image,tp_AllUsersProperties) IS NULL THEN NULL ELSE tp_AllUsersProperties END,tp_PerUserProperties = CASE WHEN tp_PerUserProperties IS NOT NULL AND CONVERT(image,tp_PerUserProperties) IS NULL THEN NULL ELSE tp_PerUserProperties END,tp_Cache = CASE WHEN tp_Cache IS NOT NULL AND CONVERT(image,tp_Cache) IS NULL THEN NULL ELSE tp_Cache END WHERE datalength(tp_View)=0 OR datalength(tp_Source)=0 OR datalength(tp_AllUsersProperties)=0 OR datalength(tp_PerUserProperties)=0 OR datalength(tp_Cache)=0 ;UPDATE [dbo].[AuditData] SET EventData = CASE WHEN EventData IS NOT NULL AND CONVERT(ntext,EventData) IS NULL THEN NULL ELSE EventData END WHERE datalength(EventData)=0 ;UPDATE [dbo].[EventCache] SET EventData = CASE WHEN EventData IS NOT NULL AND CONVERT(image,EventData) IS NULL THEN NULL ELSE EventData END,ACL = CASE WHEN ACL IS NOT NULL AND CONVERT(image,ACL) IS NULL THEN NULL ELSE ACL END WHERE datalength(EventData)=0 OR datalength(ACL)=0 ;UPDATE [dbo].[EventLog] SET FormattedFragment = CASE WHEN FormattedFragment IS NOT NULL AND CONVERT(ntext,FormattedFragment) IS NULL THEN NULL ELSE FormattedFragment END,EventData = CASE WHEN EventData IS NOT NULL AND CONVERT(image,EventData) IS NULL THEN NULL ELSE EventData END WHERE datalength(FormattedFragment)=0 OR datalength(EventData)=0 ;UPDATE [dbo].[EventSubsMatches] SET LookupFieldPermissionResults = CASE WHEN LookupFieldPermissionResults IS NOT NULL AND CONVERT(image,LookupFieldPermissionResults) IS NULL THEN NULL ELSE LookupFieldPermissionResults END WHERE datalength(LookupFieldPermissionResults)=0 ;UPDATE [dbo].[Features] SET Properties = CASE WHEN Properties IS NOT NULL AND CONVERT(ntext,Properties) IS NULL THEN NULL ELSE Properties END WHERE datalength(Properties)=0 ;UPDATE [dbo].[HT_Cache] SET [File] = CASE WHEN [File] IS NOT NULL AND CONVERT(image,[File]) IS NULL THEN NULL ELSE [File] END WHERE datalength([File])=0 ;UPDATE [dbo].[ImmedSubscriptions] SET Properties = CASE WHEN Properties IS NOT NULL AND CONVERT(ntext,Properties) IS NULL THEN NULL ELSE Properties END WHERE datalength(Properties)=0 ;UPDATE [dbo].[NavNodes] SET NodeMetaInfo = CASE WHEN NodeMetaInfo IS NOT NULL AND CONVERT(image,NodeMetaInfo) IS NULL THEN NULL ELSE NodeMetaInfo END WHERE datalength(NodeMetaInfo)=0 ;UPDATE [dbo].[Perms] SET Acl = CASE WHEN Acl IS NOT NULL AND CONVERT(image,Acl) IS NULL THEN NULL ELSE Acl END WHERE datalength(Acl)=0 ;UPDATE [dbo].[Personalization] SET tp_PerUserProperties = CASE WHEN tp_PerUserProperties IS NOT NULL AND CONVERT(image,tp_PerUserProperties) IS NULL THEN NULL ELSE tp_PerUserProperties END,tp_Cache = CASE WHEN tp_Cache IS NOT NULL AND CONVERT(image,tp_Cache) IS NULL THEN NULL ELSE tp_Cache END WHERE datalength(tp_PerUserProperties)=0 OR datalength(tp_Cache)=0 ;UPDATE [dbo].[Resources] SET NtextVal = CASE WHEN NtextVal IS NOT NULL AND CONVERT(ntext,NtextVal) IS NULL THEN NULL ELSE NtextVal END WHERE datalength(NtextVal)=0 ;UPDATE [dbo].[Sites] SET DomainGroupMapCache = CASE WHEN DomainGroupMapCache IS NOT NULL AND CONVERT(image,DomainGroupMapCache) IS NULL THEN NULL ELSE DomainGroupMapCache END WHERE datalength(DomainGroupMapCache)=0 ;UPDATE [dbo].[Webs] SET CachedNavScope = CASE WHEN CachedNavScope IS NOT NULL AND CONVERT(ntext,CachedNavScope) IS NULL THEN NULL ELSE CachedNavScope END,Description = CASE WHEN Description IS NOT NULL AND CONVERT(ntext,Description) IS NULL THEN NULL ELSE Description END,CachedNav = CASE WHEN CachedNav IS NOT NULL AND CONVERT(image,CachedNav) IS NULL THEN NULL ELSE CachedNav END,CachedInheritedNav = CASE WHEN CachedInheritedNav IS NOT NULL AND CONVERT(image,CachedInheritedNav) IS NULL THEN NULL ELSE CachedInheritedNav END,MetaInfo = CASE WHEN MetaInfo IS NOT NULL AND CONVERT(image,MetaInfo) IS NULL THEN NULL ELSE MetaInfo END,DailyUsageData = CASE WHEN DailyUsageData IS NOT NULL AND CONVERT(image,DailyUsageData) IS NULL THEN NULL ELSE DailyUsageData END,MonthlyUsageData = CASE WHEN MonthlyUsageData IS NOT NULL AND CONVERT(image,MonthlyUsageData) IS NULL THEN NULL ELSE MonthlyUsageData END,Ancestry = CASE WHEN Ancestry IS NOT NULL AND CONVERT(image,Ancestry) IS NULL THEN NULL ELSE Ancestry END WHERE datalength(CachedNavScope)=0 OR datalength(Description)=0 OR datalength(CachedNav)=0 OR datalength(CachedInheritedNav)=0 OR datalength(MetaInfo)=0 OR datalength(DailyUsageData)=0 OR datalength(MonthlyUsageData)=0 OR datalength(Ancestry)=0 ;UPDATE [dbo].[SchedSubscriptions] SET Properties = CASE WHEN Properties IS NOT NULL AND CONVERT(ntext,Properties) IS NULL THEN NULL ELSE Properties END WHERE datalength(Properties)=0 ;UPDATE [dbo].[ScheduledWorkItems] SET TextPayload = CASE WHEN TextPayload IS NOT NULL AND CONVERT(ntext,TextPayload) IS NULL THEN NULL ELSE TextPayload END,BinaryPayload = CASE WHEN BinaryPayload IS NOT NULL AND CONVERT(image,BinaryPayload) IS NULL THEN NULL ELSE BinaryPayload END WHERE datalength(TextPayload)=0 OR datalength(BinaryPayload)=0 ;UPDATE [dbo].[UserInfo] SET tp_ExternalToken = CASE WHEN tp_ExternalToken IS NOT NULL AND CONVERT(image,tp_ExternalToken) IS NULL THEN NULL ELSE tp_ExternalToken END WHERE datalength(tp_ExternalToken)=0 ;UPDATE [dbo].[Workflow] SET Modifications = CASE WHEN Modifications IS NOT NULL AND CONVERT(ntext,Modifications) IS NULL THEN NULL ELSE Modifications END,InstanceData = CASE WHEN InstanceData IS NOT NULL AND CONVERT(image,InstanceData) IS NULL THEN NULL ELSE InstanceData END,History = CASE WHEN History IS NOT NULL AND CONVERT(image,History) IS NULL THEN NULL ELSE History END WHERE datalength(Modifications)=0 OR datalength(InstanceData)=0 OR datalength(History)=0 ;UPDATE [dbo].[WorkflowAssociation] SET InstantiationParams = CASE WHEN InstantiationParams IS NOT NULL AND CONVERT(ntext,InstantiationParams) IS NULL THEN NULL ELSE InstantiationParams END WHERE datalength(InstantiationParams)=0 ;UPDATE [dbo].[AllUserData] SET ntext1 = CASE WHEN ntext1 IS NOT NULL AND CONVERT(ntext,ntext1) IS NULL THEN NULL ELSE ntext1 END,ntext2 = CASE WHEN ntext2 IS NOT NULL AND CONVERT(ntext,ntext2) IS NULL THEN NULL ELSE ntext2 END,ntext3 = CASE WHEN ntext3 IS NOT NULL AND CONVERT(ntext,ntext3) IS NULL THEN NULL ELSE ntext3 END,ntext4 = CASE WHEN ntext4 IS NOT NULL AND CONVERT(ntext,ntext4) IS NULL THEN NULL ELSE ntext4 END,ntext5 = CASE WHEN ntext5 IS NOT NULL AND CONVERT(ntext,ntext5) IS NULL THEN NULL ELSE ntext5 END,ntext6 = CASE WHEN ntext6 IS NOT NULL AND CONVERT(ntext,ntext6) IS NULL THEN NULL ELSE ntext6 END,ntext7 = CASE WHEN ntext7 IS NOT NULL AND CONVERT(ntext,ntext7) IS NULL THEN NULL ELSE ntext7 END,ntext8 = CASE WHEN ntext8 IS NOT NULL AND CONVERT(ntext,ntext8) IS NULL THEN NULL ELSE ntext8 END,ntext9 = CASE WHEN ntext9 IS NOT NULL AND CONVERT(ntext,ntext9) IS NULL THEN NULL ELSE ntext9 END,ntext10 = CASE WHEN ntext10 IS NOT NULL AND CONVERT(ntext,ntext10) IS NULL THEN NULL ELSE ntext10 END,ntext11 = CASE WHEN ntext11 IS NOT NULL AND CONVERT(ntext,ntext11) IS NULL THEN NULL ELSE ntext11 END,ntext12 = CASE WHEN ntext12 IS NOT NULL AND CONVERT(ntext,ntext12) IS NULL THEN NULL ELSE ntext12 END,ntext13 = CASE WHEN ntext13 IS NOT NULL AND CONVERT(ntext,ntext13) IS NULL THEN NULL ELSE ntext13 END,ntext14 = CASE WHEN ntext14 IS NOT NULL AND CONVERT(ntext,ntext14) IS NULL THEN NULL ELSE ntext14 END,ntext15 = CASE WHEN ntext15 IS NOT NULL AND CONVERT(ntext,ntext15) IS NULL THEN NULL ELSE ntext15 END,ntext16 = CASE WHEN ntext16 IS NOT NULL AND CONVERT(ntext,ntext16) IS NULL THEN NULL ELSE ntext16 END,ntext17 = CASE WHEN ntext17 IS NOT NULL AND CONVERT(ntext,ntext17) IS NULL THEN NULL ELSE ntext17 END,ntext18 = CASE WHEN ntext18 IS NOT NULL AND CONVERT(ntext,ntext18) IS NULL THEN NULL ELSE ntext18 END,ntext19 = CASE WHEN ntext19 IS NOT NULL AND CONVERT(ntext,ntext19) IS NULL THEN NULL ELSE ntext19 END,ntext20 = CASE WHEN ntext20 IS NOT NULL AND CONVERT(ntext,ntext20) IS NULL THEN NULL ELSE ntext20 END,ntext21 = CASE WHEN ntext21 IS NOT NULL AND CONVERT(ntext,ntext21) IS NULL THEN NULL ELSE ntext21 END,ntext22 = CASE WHEN ntext22 IS NOT NULL AND CONVERT(ntext,ntext22) IS NULL THEN NULL ELSE ntext22 END,ntext23 = CASE WHEN ntext23 IS NOT NULL AND CONVERT(ntext,ntext23) IS NULL THEN NULL ELSE ntext23 END,ntext24 = CASE WHEN ntext24 IS NOT NULL AND CONVERT(ntext,ntext24) IS NULL THEN NULL ELSE ntext24 END,ntext25 = CASE WHEN ntext25 IS NOT NULL AND CONVERT(ntext,ntext25) IS NULL THEN NULL ELSE ntext25 END,ntext26 = CASE WHEN ntext26 IS NOT NULL AND CONVERT(ntext,ntext26) IS NULL THEN NULL ELSE ntext26 END,ntext27 = CASE WHEN ntext27 IS NOT NULL AND CONVERT(ntext,ntext27) IS NULL THEN NULL ELSE ntext27 END,ntext28 = CASE WHEN ntext28 IS NOT NULL AND CONVERT(ntext,ntext28) IS NULL THEN NULL ELSE ntext28 END,ntext29 = CASE WHEN ntext29 IS NOT NULL AND CONVERT(ntext,ntext29) IS NULL THEN NULL ELSE ntext29 END,ntext30 = CASE WHEN ntext30 IS NOT NULL AND CONVERT(ntext,ntext30) IS NULL THEN NULL ELSE ntext30 END,ntext31 = CASE WHEN ntext31 IS NOT NULL AND CONVERT(ntext,ntext31) IS NULL THEN NULL ELSE ntext31 END,ntext32 = CASE WHEN ntext32 IS NOT NULL AND CONVERT(ntext,ntext32) IS NULL THEN NULL ELSE ntext32 END WHERE datalength(ntext1)=0 OR datalength(ntext2)=0 OR datalength(ntext3)=0 OR datalength(ntext4)=0 OR datalength(ntext5)=0 OR datalength(ntext6)=0 OR datalength(ntext7)=0 OR datalength(ntext8)=0 OR datalength(ntext9)=0 OR datalength(ntext10)=0 OR datalength(ntext11)=0 OR datalength(ntext12)=0 OR datalength(ntext13)=0 OR datalength(ntext14)=0 OR datalength(ntext15)=0 OR datalength(ntext16)=0 OR datalength(ntext17)=0 OR datalength(ntext18)=0 OR datalength(ntext19)=0 OR datalength(ntext20)=0 OR datalength(ntext21)=0 OR datalength(ntext22)=0 OR datalength(ntext23)=0 OR datalength(ntext24)=0 OR datalength(ntext25)=0 OR datalength(ntext26)=0 OR datalength(ntext27)=0 OR datalength(ntext28)=0 OR datalength(ntext29)=0 OR datalength(ntext30)=0 OR datalength(ntext31)=0 OR datalength(ntext32)=0 ;</value>
<text />
</action>
<action name="tsql_stack" package="sqlserver">
<type name="unicode_string" package="package0" />
<value><frame level='1' handle='0x02000000C81D290047D9F957FDC9CF5FB9CB20A5D2DF3857' line='1' offsetStart='1824' offsetEnd='2152'/></value>
<text />
</action>
</event>
<event name="wait_info" package="sqlos" id="48" version="1" timestamp="2014-02-26T13:28:44.308Z">
<data name="wait_type">
<type name="wait_types" package="sqlos" />
<value>3</value>
<text>LCK_M_S</text>
</data>
<data name="opcode">
<type name="event_opcode" package="sqlos" />
<value>1</value>
<text>End</text>
</data>
<data name="duration">
<type name="uint64" package="package0" />
<value>461290</value>
<text />
</data>
<data name="max_duration">
<type name="uint64" package="package0" />
<value>461290</value>
<text />
</data>
<data name="total_duration">
<type name="uint64" package="package0" />
<value>493239</value>
<text />
</data>
<data name="signal_duration">
<type name="uint64" package="package0" />
<value>0</value>
<text />
</data>
<data name="completed_count">
<type name="uint64" package="package0" />
<value>21</value>
<text />
</data>
<action name="callstack" package="package0">
<type name="callstack" package="package0" />
<value>0x0000000000CEDB7D
0x00000000004141EA
0x000000000041426D
0x000000000041299E
0x000000000094AE87
0x00000000004FD533
0x000000000043193F
0x000000000043657E
0x000000000094B45E
0x0000000000446AE5
0x00000000004472A9
0x00000000004538C4
0x0000000000448F9C
0x0000000000453836
0x00000000004540A0
0x000000000045367F</value>
<text />
</action>
<action name="session_id" package="sqlserver">
<type name="uint16" package="package0" />
<value>94</value>
<text />
</action>
<action name="sql_text" package="sqlserver">
<type name="unicode_string" package="package0" />
<value>(@Version nvarchar(64) output)
IF EXISTS (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[Versions]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
AND EXISTS (SELECT * FROM sysobjects join syscolumns on sysobjects.id = syscolumns.id WHERE sysobjects.name='Versions' and syscolumns.name = 'TimeStamp')
BEGIN
EXEC sp_executesql N'SELECT VersionId, Version FROM [dbo].[Versions] WITH (NOLOCK) ORDER BY VersionId, Id'
END
ELSE
BEGIN
SELECT NULL, NULL
END
</value>
<text />
</action>
</event>
<event name="wait_info" package="sqlos" id="48" version="1" timestamp="2014-02-26T13:28:44.310Z">
<data name="wait_type">
<type name="wait_types" package="sqlos" />
<value>3</value>
<text>LCK_M_S</text>
</data>
<data name="opcode">
<type name="event_opcode" package="sqlos" />
<value>1</value>
<text>End</text>
</data>
<data name="duration">
<type name="uint64" package="package0" />
<value>500355</value>
<text />
</data>
<data name="max_duration">
<type name="uint64" package="package0" />
<value>500355</value>
<text />
</data>
<data name="total_duration">
<type name="uint64" package="package0" />
<value>993594</value>
<text />
</data>
<data name="signal_duration">
<type name="uint64" package="package0" />
<value>2</value>
<text />
</data>
<data name="completed_count">
<type name="uint64" package="package0" />
<value>22</value>
<text />
</data>
<action name="callstack" package="package0">
<type name="callstack" package="package0" />
<value>0x0000000000CEDB7D
0x00000000004141EA
0x000000000041426D
0x000000000041299E
0x000000000094AE87
0x00000000004FD533
0x000000000043193F
0x000000000043657E
0x000000000094B45E
0x0000000000446AE5
0x00000000004472A9
0x00000000004538C4
0x0000000000448F9C
0x0000000000453836
0x00000000004540A0
0x000000000045367F</value>
<text />
</action>
<action name="session_id" package="sqlserver">
<type name="uint16" package="package0" />
<value>88</value>
<text />
</action>
<action name="sql_text" package="sqlserver">
<type name="unicode_string" package="package0" />
<value>(@Version nvarchar(64) output)
IF EXISTS (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[Versions]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
AND EXISTS (SELECT * FROM sysobjects join syscolumns on sysobjects.id = syscolumns.id WHERE sysobjects.name='Versions' and syscolumns.name = 'TimeStamp')
BEGIN
EXEC sp_executesql N'SELECT VersionId, Version FROM [dbo].[Versions] WITH (NOLOCK) ORDER BY VersionId, Id'
END
ELSE
BEGIN
SELECT NULL, NULL
END
</value>
<text />
</action>
</event>
<event name="error_reported" package="sqlserver" id="100" version="1" timestamp="2014-02-28T05:48:02.957Z">
<data name="error">
<type name="int32" package="package0" />
<value>7105</value>
<text />
</data>
<data name="severity">
<type name="int32" package="package0" />
<value>22</value>
<text />
</data>
<data name="state">
<type name="int32" package="package0" />
<value>6</value>
<text />
</data>
<data name="user_defined">
<type name="boolean" package="package0" />
<value>false</value>
<text />
</data>
<data name="message">
<type name="unicode_string" package="package0" />
<value>The Database ID 7, Page (1:12779100), slot 1 for LOB data type node does not exist. This is usually caused by transactions that can read uncommitted data on a data page. Run DBCC CHECKTABLE.</value>
<text />
</data>
<action name="callstack" package="package0">
<type name="callstack" package="package0" />
<value>0x0000000000CEDC3E
0x000000000048BC65
0x000000000048BA60
0x0000000000E1F5D0
0x00000000008105B6
0x000000000080F5D8
0x000000000080F2A6
0x00000000022F292D
0x0000000000C60883
0x000000000055D558
0x000000000055D0C7
0x000000000055CF1C
0x0000000000560365
0x0000000000560286
0x000000000055FD36
0x00000000005600F9</value>
<text />
</action>
<action name="session_id" package="sqlserver">
<type name="uint16" package="package0" />
<value>55</value>
<text />
</action>
<action name="sql_text" package="sqlserver">
<type name="unicode_string" package="package0" />
<value>UPDATE [dbo].[AllDocs] SET WelcomePageParameters = CASE WHEN WelcomePageParameters IS NOT NULL AND CONVERT(ntext,WelcomePageParameters) IS NULL THEN NULL ELSE WelcomePageParameters END,MetaInfo = CASE WHEN MetaInfo IS NOT NULL AND CONVERT(image,MetaInfo) IS NULL THEN NULL ELSE MetaInfo END,UnversionedMetaInfo = CASE WHEN UnversionedMetaInfo IS NOT NULL AND CONVERT(image,UnversionedMetaInfo) IS NULL THEN NULL ELSE UnversionedMetaInfo END,BuildDependencySet = CASE WHEN BuildDependencySet IS NOT NULL AND CONVERT(image,BuildDependencySet) IS NULL THEN NULL ELSE BuildDependencySet END,FileFormatMetaInfo = CASE WHEN FileFormatMetaInfo IS NOT NULL AND CONVERT(image,FileFormatMetaInfo) IS NULL THEN NULL ELSE FileFormatMetaInfo END WHERE datalength(WelcomePageParameters)=0 OR datalength(MetaInfo)=0 OR datalength(UnversionedMetaInfo)=0 OR datalength(BuildDependencySet)=0 OR datalength(FileFormatMetaInfo)=0 ;UPDATE [dbo].[AllDocStreams] SET Content = CASE WHEN Content IS NOT NULL AND CONVERT(image,Content) IS NULL THEN NULL ELSE Content END WHERE datalength(Content)=0 ;UPDATE [dbo].[AllDocVersions] SET MetaInfo = CASE WHEN MetaInfo IS NOT NULL AND CONVERT(image,MetaInfo) IS NULL THEN NULL ELSE MetaInfo END,Content = CASE WHEN Content IS NOT NULL AND CONVERT(image,Content) IS NULL THEN NULL ELSE Content END WHERE datalength(MetaInfo)=0 OR datalength(Content)=0 ;UPDATE [dbo].[AllLists] SET tp_Fields = CASE WHEN tp_Fields IS NOT NULL AND CONVERT(ntext,tp_Fields) IS NULL THEN NULL ELSE tp_Fields END,tp_ContentTypes = CASE WHEN tp_ContentTypes IS NOT NULL AND CONVERT(ntext,tp_ContentTypes) IS NULL THEN NULL ELSE tp_ContentTypes END WHERE datalength(tp_Fields)=0 OR datalength(tp_ContentTypes)=0 ;UPDATE [dbo].[AllWebParts] SET tp_View = CASE WHEN tp_View IS NOT NULL AND CONVERT(ntext,tp_View) IS NULL THEN NULL ELSE tp_View END,tp_Source = CASE WHEN tp_Source IS NOT NULL AND CONVERT(ntext,tp_Source) IS NULL THEN NULL ELSE tp_Source END,tp_AllUsersProperties = CASE WHEN tp_AllUsersProperties IS NOT NULL AND CONVERT(image,tp_AllUsersProperties) IS NULL THEN NULL ELSE tp_AllUsersProperties END,tp_PerUserProperties = CASE WHEN tp_PerUserProperties IS NOT NULL AND CONVERT(image,tp_PerUserProperties) IS NULL THEN NULL ELSE tp_PerUserProperties END,tp_Cache = CASE WHEN tp_Cache IS NOT NULL AND CONVERT(image,tp_Cache) IS NULL THEN NULL ELSE tp_Cache END WHERE datalength(tp_View)=0 OR datalength(tp_Source)=0 OR datalength(tp_AllUsersProperties)=0 OR datalength(tp_PerUserProperties)=0 OR datalength(tp_Cache)=0 ;UPDATE [dbo].[AuditData] SET EventData = CASE WHEN EventData IS NOT NULL AND CONVERT(ntext,EventData) IS NULL THEN NULL ELSE EventData END WHERE datalength(EventData)=0 ;UPDATE [dbo].[EventCache] SET EventData = CASE WHEN EventData IS NOT NULL AND CONVERT(image,EventData) IS NULL THEN NULL ELSE EventData END,ACL = CASE WHEN ACL IS NOT NULL AND CONVERT(image,ACL) IS NULL THEN NULL ELSE ACL END WHERE datalength(EventData)=0 OR datalength(ACL)=0 ;UPDATE [dbo].[EventLog] SET FormattedFragment = CASE WHEN FormattedFragment IS NOT NULL AND CONVERT(ntext,FormattedFragment) IS NULL THEN NULL ELSE FormattedFragment END,EventData = CASE WHEN EventData IS NOT NULL AND CONVERT(image,EventData) IS NULL THEN NULL ELSE EventData END WHERE datalength(FormattedFragment)=0 OR datalength(EventData)=0 ;UPDATE [dbo].[EventSubsMatches] SET LookupFieldPermissionResults = CASE WHEN LookupFieldPermissionResults IS NOT NULL AND CONVERT(image,LookupFieldPermissionResults) IS NULL THEN NULL ELSE LookupFieldPermissionResults END WHERE datalength(LookupFieldPermissionResults)=0 ;UPDATE [dbo].[Features] SET Properties = CASE WHEN Properties IS NOT NULL AND CONVERT(ntext,Properties) IS NULL THEN NULL ELSE Properties END WHERE datalength(Properties)=0 ;UPDATE [dbo].[HT_Cache] SET [File] = CASE WHEN [File] IS NOT NULL AND CONVERT(image,[File]) IS NULL THEN NULL ELSE [File] END WHERE datalength([File])=0 ;UPDATE [dbo].[ImmedSubscriptions] SET Properties = CASE WHEN Properties IS NOT NULL AND CONVERT(ntext,Properties) IS NULL THEN NULL ELSE Properties END WHERE datalength(Properties)=0 ;UPDATE [dbo].[NavNodes] SET NodeMetaInfo = CASE WHEN NodeMetaInfo IS NOT NULL AND CONVERT(image,NodeMetaInfo) IS NULL THEN NULL ELSE NodeMetaInfo END WHERE datalength(NodeMetaInfo)=0 ;UPDATE [dbo].[Perms] SET Acl = CASE WHEN Acl IS NOT NULL AND CONVERT(image,Acl) IS NULL THEN NULL ELSE Acl END WHERE datalength(Acl)=0 ;UPDATE [dbo].[Personalization] SET tp_PerUserProperties = CASE WHEN tp_PerUserProperties IS NOT NULL AND CONVERT(image,tp_PerUserProperties) IS NULL THEN NULL ELSE tp_PerUserProperties END,tp_Cache = CASE WHEN tp_Cache IS NOT NULL AND CONVERT(image,tp_Cache) IS NULL THEN NULL ELSE tp_Cache END WHERE datalength(tp_PerUserProperties)=0 OR datalength(tp_Cache)=0 ;UPDATE [dbo].[Resources] SET NtextVal = CASE WHEN NtextVal IS NOT NULL AND CONVERT(ntext,NtextVal) IS NULL THEN NULL ELSE NtextVal END WHERE datalength(NtextVal)=0 ;UPDATE [dbo].[Sites] SET DomainGroupMapCache = CASE WHEN DomainGroupMapCache IS NOT NULL AND CONVERT(image,DomainGroupMapCache) IS NULL THEN NULL ELSE DomainGroupMapCache END WHERE datalength(DomainGroupMapCache)=0 ;UPDATE [dbo].[Webs] SET CachedNavScope = CASE WHEN CachedNavScope IS NOT NULL AND CONVERT(ntext,CachedNavScope) IS NULL THEN NULL ELSE CachedNavScope END,Description = CASE WHEN Description IS NOT NULL AND CONVERT(ntext,Description) IS NULL THEN NULL ELSE Description END,CachedNav = CASE WHEN CachedNav IS NOT NULL AND CONVERT(image,CachedNav) IS NULL THEN NULL ELSE CachedNav END,CachedInheritedNav = CASE WHEN CachedInheritedNav IS NOT NULL AND CONVERT(image,CachedInheritedNav) IS NULL THEN NULL ELSE CachedInheritedNav END,MetaInfo = CASE WHEN MetaInfo IS NOT NULL AND CONVERT(image,MetaInfo) IS NULL THEN NULL ELSE MetaInfo END,DailyUsageData = CASE WHEN DailyUsageData IS NOT NULL AND CONVERT(image,DailyUsageData) IS NULL THEN NULL ELSE DailyUsageData END,MonthlyUsageData = CASE WHEN MonthlyUsageData IS NOT NULL AND CONVERT(image,MonthlyUsageData) IS NULL THEN NULL ELSE MonthlyUsageData END,Ancestry = CASE WHEN Ancestry IS NOT NULL AND CONVERT(image,Ancestry) IS NULL THEN NULL ELSE Ancestry END WHERE datalength(CachedNavScope)=0 OR datalength(Description)=0 OR datalength(CachedNav)=0 OR datalength(CachedInheritedNav)=0 OR datalength(MetaInfo)=0 OR datalength(DailyUsageData)=0 OR datalength(MonthlyUsageData)=0 OR datalength(Ancestry)=0 ;UPDATE [dbo].[SchedSubscriptions] SET Properties = CASE WHEN Properties IS NOT NULL AND CONVERT(ntext,Properties) IS NULL THEN NULL ELSE Properties END WHERE datalength(Properties)=0 ;UPDATE [dbo].[ScheduledWorkItems] SET TextPayload = CASE WHEN TextPayload IS NOT NULL AND CONVERT(ntext,TextPayload) IS NULL THEN NULL ELSE TextPayload END,BinaryPayload = CASE WHEN BinaryPayload IS NOT NULL AND CONVERT(image,BinaryPayload) IS NULL THEN NULL ELSE BinaryPayload END WHERE datalength(TextPayload)=0 OR datalength(BinaryPayload)=0 ;UPDATE [dbo].[UserInfo] SET tp_ExternalToken = CASE WHEN tp_ExternalToken IS NOT NULL AND CONVERT(image,tp_ExternalToken) IS NULL THEN NULL ELSE tp_ExternalToken END WHERE datalength(tp_ExternalToken)=0 ;UPDATE [dbo].[Workflow] SET Modifications = CASE WHEN Modifications IS NOT NULL AND CONVERT(ntext,Modifications) IS NULL THEN NULL ELSE Modifications END,InstanceData = CASE WHEN InstanceData IS NOT NULL AND CONVERT(image,InstanceData) IS NULL THEN NULL ELSE InstanceData END,History = CASE WHEN History IS NOT NULL AND CONVERT(image,History) IS NULL THEN NULL ELSE History END WHERE datalength(Modifications)=0 OR datalength(InstanceData)=0 OR datalength(History)=0 ;UPDATE [dbo].[WorkflowAssociation] SET InstantiationParams = CASE WHEN InstantiationParams IS NOT NULL AND CONVERT(ntext,InstantiationParams) IS NULL THEN NULL ELSE InstantiationParams END WHERE datalength(InstantiationParams)=0 ;UPDATE [dbo].[AllUserData] SET ntext1 = CASE WHEN ntext1 IS NOT NULL AND CONVERT(ntext,ntext1) IS NULL THEN NULL ELSE ntext1 END,ntext2 = CASE WHEN ntext2 IS NOT NULL AND CONVERT(ntext,ntext2) IS NULL THEN NULL ELSE ntext2 END,ntext3 = CASE WHEN ntext3 IS NOT NULL AND CONVERT(ntext,ntext3) IS NULL THEN NULL ELSE ntext3 END,ntext4 = CASE WHEN ntext4 IS NOT NULL AND CONVERT(ntext,ntext4) IS NULL THEN NULL ELSE ntext4 END,ntext5 = CASE WHEN ntext5 IS NOT NULL AND CONVERT(ntext,ntext5) IS NULL THEN NULL ELSE ntext5 END,ntext6 = CASE WHEN ntext6 IS NOT NULL AND CONVERT(ntext,ntext6) IS NULL THEN NULL ELSE ntext6 END,ntext7 = CASE WHEN ntext7 IS NOT NULL AND CONVERT(ntext,ntext7) IS NULL THEN NULL ELSE ntext7 END,ntext8 = CASE WHEN ntext8 IS NOT NULL AND CONVERT(ntext,ntext8) IS NULL THEN NULL ELSE ntext8 END,ntext9 = CASE WHEN ntext9 IS NOT NULL AND CONVERT(ntext,ntext9) IS NULL THEN NULL ELSE ntext9 END,ntext10 = CASE WHEN ntext10 IS NOT NULL AND CONVERT(ntext,ntext10) IS NULL THEN NULL ELSE ntext10 END,ntext11 = CASE WHEN ntext11 IS NOT NULL AND CONVERT(ntext,ntext11) IS NULL THEN NULL ELSE ntext11 END,ntext12 = CASE WHEN ntext12 IS NOT NULL AND CONVERT(ntext,ntext12) IS NULL THEN NULL ELSE ntext12 END,ntext13 = CASE WHEN ntext13 IS NOT NULL AND CONVERT(ntext,ntext13) IS NULL THEN NULL ELSE ntext13 END,ntext14 = CASE WHEN ntext14 IS NOT NULL AND CONVERT(ntext,ntext14) IS NULL THEN NULL ELSE ntext14 END,ntext15 = CASE WHEN ntext15 IS NOT NULL AND CONVERT(ntext,ntext15) IS NULL THEN NULL ELSE ntext15 END,ntext16 = CASE WHEN ntext16 IS NOT NULL AND CONVERT(ntext,ntext16) IS NULL THEN NULL ELSE ntext16 END,ntext17 = CASE WHEN ntext17 IS NOT NULL AND CONVERT(ntext,ntext17) IS NULL THEN NULL ELSE ntext17 END,ntext18 = CASE WHEN ntext18 IS NOT NULL AND CONVERT(ntext,ntext18) IS NULL THEN NULL ELSE ntext18 END,ntext19 = CASE WHEN ntext19 IS NOT NULL AND CONVERT(ntext,ntext19) IS NULL THEN NULL ELSE ntext19 END,ntext20 = CASE WHEN ntext20 IS NOT NULL AND CONVERT(ntext,ntext20) IS NULL THEN NULL ELSE ntext20 END,ntext21 = CASE WHEN ntext21 IS NOT NULL AND CONVERT(ntext,ntext21) IS NULL THEN NULL ELSE ntext21 END,ntext22 = CASE WHEN ntext22 IS NOT NULL AND CONVERT(ntext,ntext22) IS NULL THEN NULL ELSE ntext22 END,ntext23 = CASE WHEN ntext23 IS NOT NULL AND CONVERT(ntext,ntext23) IS NULL THEN NULL ELSE ntext23 END,ntext24 = CASE WHEN ntext24 IS NOT NULL AND CONVERT(ntext,ntext24) IS NULL THEN NULL ELSE ntext24 END,ntext25 = CASE WHEN ntext25 IS NOT NULL AND CONVERT(ntext,ntext25) IS NULL THEN NULL ELSE ntext25 END,ntext26 = CASE WHEN ntext26 IS NOT NULL AND CONVERT(ntext,ntext26) IS NULL THEN NULL ELSE ntext26 END,ntext27 = CASE WHEN ntext27 IS NOT NULL AND CONVERT(ntext,ntext27) IS NULL THEN NULL ELSE ntext27 END,ntext28 = CASE WHEN ntext28 IS NOT NULL AND CONVERT(ntext,ntext28) IS NULL THEN NULL ELSE ntext28 END,ntext29 = CASE WHEN ntext29 IS NOT NULL AND CONVERT(ntext,ntext29) IS NULL THEN NULL ELSE ntext29 END,ntext30 = CASE WHEN ntext30 IS NOT NULL AND CONVERT(ntext,ntext30) IS NULL THEN NULL ELSE ntext30 END,ntext31 = CASE WHEN ntext31 IS NOT NULL AND CONVERT(ntext,ntext31) IS NULL THEN NULL ELSE ntext31 END,ntext32 = CASE WHEN ntext32 IS NOT NULL AND CONVERT(ntext,ntext32) IS NULL THEN NULL ELSE ntext32 END WHERE datalength(ntext1)=0 OR datalength(ntext2)=0 OR datalength(ntext3)=0 OR datalength(ntext4)=0 OR datalength(ntext5)=0 OR datalength(ntext6)=0 OR datalength(ntext7)=0 OR datalength(ntext8)=0 OR datalength(ntext9)=0 OR datalength(ntext10)=0 OR datalength(ntext11)=0 OR datalength(ntext12)=0 OR datalength(ntext13)=0 OR datalength(ntext14)=0 OR datalength(ntext15)=0 OR datalength(ntext16)=0 OR datalength(ntext17)=0 OR datalength(ntext18)=0 OR datalength(ntext19)=0 OR datalength(ntext20)=0 OR datalength(ntext21)=0 OR datalength(ntext22)=0 OR datalength(ntext23)=0 OR datalength(ntext24)=0 OR datalength(ntext25)=0 OR datalength(ntext26)=0 OR datalength(ntext27)=0 OR datalength(ntext28)=0 OR datalength(ntext29)=0 OR datalength(ntext30)=0 OR datalength(ntext31)=0 OR datalength(ntext32)=0 ;</value>
<text />
</action>
<action name="tsql_stack" package="sqlserver">
<type name="unicode_string" package="package0" />
<value><frame level='1' handle='0x02000000C81D290047D9F957FDC9CF5FB9CB20A5D2DF3857' line='1' offsetStart='1824' offsetEnd='2152'/></value>
<text />
</action>
</event>
<event name="wait_info" package="sqlos" id="48" version="1" timestamp="2014-02-28T05:48:03.333Z">
<data name="wait_type">
<type name="wait_types" package="sqlos" />
<value>3</value>
<text>LCK_M_S</text>
</data>
<data name="opcode">
<type name="event_opcode" package="sqlos" />
<value>1</value>
<text>End</text>
</data>
<data name="duration">
<type name="uint64" package="package0" />
<value>473655</value>
<text />
</data>
<data name="max_duration">
<type name="uint64" package="package0" />
<value>500355</value>
<text />
</data>
<data name="total_duration">
<type name="uint64" package="package0" />
<value>1469581</value>
<text />
</data>
<data name="signal_duration">
<type name="uint64" package="package0" />
<value>4</value>
<text />
</data>
<data name="completed_count">
<type name="uint64" package="package0" />
<value>101</value>
<text />
</data>
<action name="callstack" package="package0">
<type name="callstack" package="package0" />
<value>0x0000000000CEDB7D
0x00000000004141EA
0x000000000041426D
0x000000000041299E
0x000000000094AE87
0x00000000004FD533
0x000000000043193F
0x000000000043657E
0x000000000094B45E
0x0000000000446AE5
0x00000000004472A9
0x00000000004538C4
0x0000000000448F9C
0x0000000000453836
0x00000000004540A0
0x000000000045367F</value>
<text />
</action>
<action name="session_id" package="sqlserver">
<type name="uint16" package="package0" />
<value>89</value>
<text />
</action>
<action name="sql_text" package="sqlserver">
<type name="unicode_string" package="package0" />
<value>(@Version nvarchar(64) output)
IF EXISTS (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[Versions]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
AND EXISTS (SELECT * FROM sysobjects join syscolumns on sysobjects.id = syscolumns.id WHERE sysobjects.name='Versions' and syscolumns.name = 'TimeStamp')
BEGIN
EXEC sp_executesql N'SELECT VersionId, Version FROM [dbo].[Versions] WITH (NOLOCK) ORDER BY VersionId, Id'
END
ELSE
BEGIN
SELECT NULL, NULL
END
</value>
<text />
</action>
</event>
<event name="wait_info" package="sqlos" id="48" version="1" timestamp="2014-02-28T05:48:03.376Z">
<data name="wait_type">
<type name="wait_types" package="sqlos" />
<value>3</value>
<text>LCK_M_S</text>
</data>
<data name="opcode">
<type name="event_opcode" package="sqlos" />
<value>1</value>
<text>End</text>
</data>
<data name="duration">
<type name="uint64" package="package0" />
<value>526804</value>
<text />
</data>
<data name="max_duration">
<type name="uint64" package="package0" />
<value>526804</value>
<text />
</data>
<data name="total_duration">
<type name="uint64" package="package0" />
<value>1996385</value>
<text />
</data>
<data name="signal_duration">
<type name="uint64" package="package0" />
<value>47</value>
<text />
</data>
<data name="completed_count">
<type name="uint64" package="package0" />
<value>102</value>
<text />
</data>
<action name="callstack" package="package0">
<type name="callstack" package="package0" />
<value>0x0000000000CEDB7D
0x00000000004141EA
0x000000000041426D
0x000000000041299E
0x000000000094AE87
0x00000000004FD533
0x000000000043193F
0x000000000043657E
0x000000000094B45E
0x0000000000446AE5
0x00000000004472A9
0x00000000004538C4
0x0000000000448F9C
0x0000000000453836
0x00000000004540A0
0x000000000045367F</value>
<text />
</action>
<action name="session_id" package="sqlserver">
<type name="uint16" package="package0" />
<value>56</value>
<text />
</action>
<action name="sql_text" package="sqlserver">
<type name="unicode_string" package="package0" />
<value>(@Version nvarchar(64) output)
IF EXISTS (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[Versions]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
AND EXISTS (SELECT * FROM sysobjects join syscolumns on sysobjects.id = syscolumns.id WHERE sysobjects.name='Versions' and syscolumns.name = 'TimeStamp')
BEGIN
EXEC sp_executesql N'SELECT VersionId, Version FROM [dbo].[Versions] WITH (NOLOCK) ORDER BY VersionId, Id'
END
ELSE
BEGIN
SELECT NULL, NULL
END
</value>
<text />
</action>
</event>
<event name="error_reported" package="sqlserver" id="100" version="1" timestamp="2014-02-28T05:57:22.569Z">
<data name="error">
<type name="int32" package="package0" />
<value>7105</value>
<text />
</data>
<data name="severity">
<type name="int32" package="package0" />
<value>22</value>
<text />
</data>
<data name="state">
<type name="int32" package="package0" />
<value>6</value>
<text />
</data>
<data name="user_defined">
<type name="boolean" package="package0" />
<value>false</value>
<text />
</data>
<data name="message">
<type name="unicode_string" package="package0" />
<value>The Database ID 7, Page (1:12779100), slot 1 for LOB data type node does not exist. This is usually caused by transactions that can read uncommitted data on a data page. Run DBCC CHECKTABLE.</value>
<text />
</data>
<action name="callstack" package="package0">
<type name="callstack" package="package0" />
<value>0x0000000000CEDC3E
0x000000000048BC65
0x000000000048BA60
0x0000000000E1F5D0
0x00000000008105B6
0x000000000080F5D8
0x000000000080F2A6
0x00000000022F292D
0x0000000000C60883
0x000000000055D558
0x000000000055D0C7
0x000000000055CF1C
0x0000000000560365
0x0000000000560286
0x000000000055FD36
0x00000000005600F9</value>
<text />
</action>
<action name="session_id" package="sqlserver">
<type name="uint16" package="package0" />
<value>89</value>
<text />
</action>
<action name="sql_text" package="sqlserver">
<type name="unicode_string" package="package0" />
<value>UPDATE [dbo].[AllDocs] SET WelcomePageParameters = CASE WHEN WelcomePageParameters IS NOT NULL AND CONVERT(ntext,WelcomePageParameters) IS NULL THEN NULL ELSE WelcomePageParameters END,MetaInfo = CASE WHEN MetaInfo IS NOT NULL AND CONVERT(image,MetaInfo) IS NULL THEN NULL ELSE MetaInfo END,UnversionedMetaInfo = CASE WHEN UnversionedMetaInfo IS NOT NULL AND CONVERT(image,UnversionedMetaInfo) IS NULL THEN NULL ELSE UnversionedMetaInfo END,BuildDependencySet = CASE WHEN BuildDependencySet IS NOT NULL AND CONVERT(image,BuildDependencySet) IS NULL THEN NULL ELSE BuildDependencySet END,FileFormatMetaInfo = CASE WHEN FileFormatMetaInfo IS NOT NULL AND CONVERT(image,FileFormatMetaInfo) IS NULL THEN NULL ELSE FileFormatMetaInfo END WHERE datalength(WelcomePageParameters)=0 OR datalength(MetaInfo)=0 OR datalength(UnversionedMetaInfo)=0 OR datalength(BuildDependencySet)=0 OR datalength(FileFormatMetaInfo)=0 ;UPDATE [dbo].[AllDocStreams] SET Content = CASE WHEN Content IS NOT NULL AND CONVERT(image,Content) IS NULL THEN NULL ELSE Content END WHERE datalength(Content)=0 ;UPDATE [dbo].[AllDocVersions] SET MetaInfo = CASE WHEN MetaInfo IS NOT NULL AND CONVERT(image,MetaInfo) IS NULL THEN NULL ELSE MetaInfo END,Content = CASE WHEN Content IS NOT NULL AND CONVERT(image,Content) IS NULL THEN NULL ELSE Content END WHERE datalength(MetaInfo)=0 OR datalength(Content)=0 ;UPDATE [dbo].[AllLists] SET tp_Fields = CASE WHEN tp_Fields IS NOT NULL AND CONVERT(ntext,tp_Fields) IS NULL THEN NULL ELSE tp_Fields END,tp_ContentTypes = CASE WHEN tp_ContentTypes IS NOT NULL AND CONVERT(ntext,tp_ContentTypes) IS NULL THEN NULL ELSE tp_ContentTypes END WHERE datalength(tp_Fields)=0 OR datalength(tp_ContentTypes)=0 ;UPDATE [dbo].[AllWebParts] SET tp_View = CASE WHEN tp_View IS NOT NULL AND CONVERT(ntext,tp_View) IS NULL THEN NULL ELSE tp_View END,tp_Source = CASE WHEN tp_Source IS NOT NULL AND CONVERT(ntext,tp_Source) IS NULL THEN NULL ELSE tp_Source END,tp_AllUsersProperties = CASE WHEN tp_AllUsersProperties IS NOT NULL AND CONVERT(image,tp_AllUsersProperties) IS NULL THEN NULL ELSE tp_AllUsersProperties END,tp_PerUserProperties = CASE WHEN tp_PerUserProperties IS NOT NULL AND CONVERT(image,tp_PerUserProperties) IS NULL THEN NULL ELSE tp_PerUserProperties END,tp_Cache = CASE WHEN tp_Cache IS NOT NULL AND CONVERT(image,tp_Cache) IS NULL THEN NULL ELSE tp_Cache END WHERE datalength(tp_View)=0 OR datalength(tp_Source)=0 OR datalength(tp_AllUsersProperties)=0 OR datalength(tp_PerUserProperties)=0 OR datalength(tp_Cache)=0 ;UPDATE [dbo].[AuditData] SET EventData = CASE WHEN EventData IS NOT NULL AND CONVERT(ntext,EventData) IS NULL THEN NULL ELSE EventData END WHERE datalength(EventData)=0 ;UPDATE [dbo].[EventCache] SET EventData = CASE WHEN EventData IS NOT NULL AND CONVERT(image,EventData) IS NULL THEN NULL ELSE EventData END,ACL = CASE WHEN ACL IS NOT NULL AND CONVERT(image,ACL) IS NULL THEN NULL ELSE ACL END WHERE datalength(EventData)=0 OR datalength(ACL)=0 ;UPDATE [dbo].[EventLog] SET FormattedFragment = CASE WHEN FormattedFragment IS NOT NULL AND CONVERT(ntext,FormattedFragment) IS NULL THEN NULL ELSE FormattedFragment END,EventData = CASE WHEN EventData IS NOT NULL AND CONVERT(image,EventData) IS NULL THEN NULL ELSE EventData END WHERE datalength(FormattedFragment)=0 OR datalength(EventData)=0 ;UPDATE [dbo].[EventSubsMatches] SET LookupFieldPermissionResults = CASE WHEN LookupFieldPermissionResults IS NOT NULL AND CONVERT(image,LookupFieldPermissionResults) IS NULL THEN NULL ELSE LookupFieldPermissionResults END WHERE datalength(LookupFieldPermissionResults)=0 ;UPDATE [dbo].[Features] SET Properties = CASE WHEN Properties IS NOT NULL AND CONVERT(ntext,Properties) IS NULL THEN NULL ELSE Properties END WHERE datalength(Properties)=0 ;UPDATE [dbo].[HT_Cache] SET [File] = CASE WHEN [File] IS NOT NULL AND CONVERT(image,[File]) IS NULL THEN NULL ELSE [File] END WHERE datalength([File])=0 ;UPDATE [dbo].[ImmedSubscriptions] SET Properties = CASE WHEN Properties IS NOT NULL AND CONVERT(ntext,Properties) IS NULL THEN NULL ELSE Properties END WHERE datalength(Properties)=0 ;UPDATE [dbo].[NavNodes] SET NodeMetaInfo = CASE WHEN NodeMetaInfo IS NOT NULL AND CONVERT(image,NodeMetaInfo) IS NULL THEN NULL ELSE NodeMetaInfo END WHERE datalength(NodeMetaInfo)=0 ;UPDATE [dbo].[Perms] SET Acl = CASE WHEN Acl IS NOT NULL AND CONVERT(image,Acl) IS NULL THEN NULL ELSE Acl END WHERE datalength(Acl)=0 ;UPDATE [dbo].[Personalization] SET tp_PerUserProperties = CASE WHEN tp_PerUserProperties IS NOT NULL AND CONVERT(image,tp_PerUserProperties) IS NULL THEN NULL ELSE tp_PerUserProperties END,tp_Cache = CASE WHEN tp_Cache IS NOT NULL AND CONVERT(image,tp_Cache) IS NULL THEN NULL ELSE tp_Cache END WHERE datalength(tp_PerUserProperties)=0 OR datalength(tp_Cache)=0 ;UPDATE [dbo].[Resources] SET NtextVal = CASE WHEN NtextVal IS NOT NULL AND CONVERT(ntext,NtextVal) IS NULL THEN NULL ELSE NtextVal END WHERE datalength(NtextVal)=0 ;UPDATE [dbo].[Sites] SET DomainGroupMapCache = CASE WHEN DomainGroupMapCache IS NOT NULL AND CONVERT(image,DomainGroupMapCache) IS NULL THEN NULL ELSE DomainGroupMapCache END WHERE datalength(DomainGroupMapCache)=0 ;UPDATE [dbo].[Webs] SET CachedNavScope = CASE WHEN CachedNavScope IS NOT NULL AND CONVERT(ntext,CachedNavScope) IS NULL THEN NULL ELSE CachedNavScope END,Description = CASE WHEN Description IS NOT NULL AND CONVERT(ntext,Description) IS NULL THEN NULL ELSE Description END,CachedNav = CASE WHEN CachedNav IS NOT NULL AND CONVERT(image,CachedNav) IS NULL THEN NULL ELSE CachedNav END,CachedInheritedNav = CASE WHEN CachedInheritedNav IS NOT NULL AND CONVERT(image,CachedInheritedNav) IS NULL THEN NULL ELSE CachedInheritedNav END,MetaInfo = CASE WHEN MetaInfo IS NOT NULL AND CONVERT(image,MetaInfo) IS NULL THEN NULL ELSE MetaInfo END,DailyUsageData = CASE WHEN DailyUsageData IS NOT NULL AND CONVERT(image,DailyUsageData) IS NULL THEN NULL ELSE DailyUsageData END,MonthlyUsageData = CASE WHEN MonthlyUsageData IS NOT NULL AND CONVERT(image,MonthlyUsageData) IS NULL THEN NULL ELSE MonthlyUsageData END,Ancestry = CASE WHEN Ancestry IS NOT NULL AND CONVERT(image,Ancestry) IS NULL THEN NULL ELSE Ancestry END WHERE datalength(CachedNavScope)=0 OR datalength(Description)=0 OR datalength(CachedNav)=0 OR datalength(CachedInheritedNav)=0 OR datalength(MetaInfo)=0 OR datalength(DailyUsageData)=0 OR datalength(MonthlyUsageData)=0 OR datalength(Ancestry)=0 ;UPDATE [dbo].[SchedSubscriptions] SET Properties = CASE WHEN Properties IS NOT NULL AND CONVERT(ntext,Properties) IS NULL THEN NULL ELSE Properties END WHERE datalength(Properties)=0 ;UPDATE [dbo].[ScheduledWorkItems] SET TextPayload = CASE WHEN TextPayload IS NOT NULL AND CONVERT(ntext,TextPayload) IS NULL THEN NULL ELSE TextPayload END,BinaryPayload = CASE WHEN BinaryPayload IS NOT NULL AND CONVERT(image,BinaryPayload) IS NULL THEN NULL ELSE BinaryPayload END WHERE datalength(TextPayload)=0 OR datalength(BinaryPayload)=0 ;UPDATE [dbo].[UserInfo] SET tp_ExternalToken = CASE WHEN tp_ExternalToken IS NOT NULL AND CONVERT(image,tp_ExternalToken) IS NULL THEN NULL ELSE tp_ExternalToken END WHERE datalength(tp_ExternalToken)=0 ;UPDATE [dbo].[Workflow] SET Modifications = CASE WHEN Modifications IS NOT NULL AND CONVERT(ntext,Modifications) IS NULL THEN NULL ELSE Modifications END,InstanceData = CASE WHEN InstanceData IS NOT NULL AND CONVERT(image,InstanceData) IS NULL THEN NULL ELSE InstanceData END,History = CASE WHEN History IS NOT NULL AND CONVERT(image,History) IS NULL THEN NULL ELSE History END WHERE datalength(Modifications)=0 OR datalength(InstanceData)=0 OR datalength(History)=0 ;UPDATE [dbo].[WorkflowAssociation] SET InstantiationParams = CASE WHEN InstantiationParams IS NOT NULL AND CONVERT(ntext,InstantiationParams) IS NULL THEN NULL ELSE InstantiationParams END WHERE datalength(InstantiationParams)=0 ;UPDATE [dbo].[AllUserData] SET ntext1 = CASE WHEN ntext1 IS NOT NULL AND CONVERT(ntext,ntext1) IS NULL THEN NULL ELSE ntext1 END,ntext2 = CASE WHEN ntext2 IS NOT NULL AND CONVERT(ntext,ntext2) IS NULL THEN NULL ELSE ntext2 END,ntext3 = CASE WHEN ntext3 IS NOT NULL AND CONVERT(ntext,ntext3) IS NULL THEN NULL ELSE ntext3 END,ntext4 = CASE WHEN ntext4 IS NOT NULL AND CONVERT(ntext,ntext4) IS NULL THEN NULL ELSE ntext4 END,ntext5 = CASE WHEN ntext5 IS NOT NULL AND CONVERT(ntext,ntext5) IS NULL THEN NULL ELSE ntext5 END,ntext6 = CASE WHEN ntext6 IS NOT NULL AND CONVERT(ntext,ntext6) IS NULL THEN NULL ELSE ntext6 END,ntext7 = CASE WHEN ntext7 IS NOT NULL AND CONVERT(ntext,ntext7) IS NULL THEN NULL ELSE ntext7 END,ntext8 = CASE WHEN ntext8 IS NOT NULL AND CONVERT(ntext,ntext8) IS NULL THEN NULL ELSE ntext8 END,ntext9 = CASE WHEN ntext9 IS NOT NULL AND CONVERT(ntext,ntext9) IS NULL THEN NULL ELSE ntext9 END,ntext10 = CASE WHEN ntext10 IS NOT NULL AND CONVERT(ntext,ntext10) IS NULL THEN NULL ELSE ntext10 END,ntext11 = CASE WHEN ntext11 IS NOT NULL AND CONVERT(ntext,ntext11) IS NULL THEN NULL ELSE ntext11 END,ntext12 = CASE WHEN ntext12 IS NOT NULL AND CONVERT(ntext,ntext12) IS NULL THEN NULL ELSE ntext12 END,ntext13 = CASE WHEN ntext13 IS NOT NULL AND CONVERT(ntext,ntext13) IS NULL THEN NULL ELSE ntext13 END,ntext14 = CASE WHEN ntext14 IS NOT NULL AND CONVERT(ntext,ntext14) IS NULL THEN NULL ELSE ntext14 END,ntext15 = CASE WHEN ntext15 IS NOT NULL AND CONVERT(ntext,ntext15) IS NULL THEN NULL ELSE ntext15 END,ntext16 = CASE WHEN ntext16 IS NOT NULL AND CONVERT(ntext,ntext16) IS NULL THEN NULL ELSE ntext16 END,ntext17 = CASE WHEN ntext17 IS NOT NULL AND CONVERT(ntext,ntext17) IS NULL THEN NULL ELSE ntext17 END,ntext18 = CASE WHEN ntext18 IS NOT NULL AND CONVERT(ntext,ntext18) IS NULL THEN NULL ELSE ntext18 END,ntext19 = CASE WHEN ntext19 IS NOT NULL AND CONVERT(ntext,ntext19) IS NULL THEN NULL ELSE ntext19 END,ntext20 = CASE WHEN ntext20 IS NOT NULL AND CONVERT(ntext,ntext20) IS NULL THEN NULL ELSE ntext20 END,ntext21 = CASE WHEN ntext21 IS NOT NULL AND CONVERT(ntext,ntext21) IS NULL THEN NULL ELSE ntext21 END,ntext22 = CASE WHEN ntext22 IS NOT NULL AND CONVERT(ntext,ntext22) IS NULL THEN NULL ELSE ntext22 END,ntext23 = CASE WHEN ntext23 IS NOT NULL AND CONVERT(ntext,ntext23) IS NULL THEN NULL ELSE ntext23 END,ntext24 = CASE WHEN ntext24 IS NOT NULL AND CONVERT(ntext,ntext24) IS NULL THEN NULL ELSE ntext24 END,ntext25 = CASE WHEN ntext25 IS NOT NULL AND CONVERT(ntext,ntext25) IS NULL THEN NULL ELSE ntext25 END,ntext26 = CASE WHEN ntext26 IS NOT NULL AND CONVERT(ntext,ntext26) IS NULL THEN NULL ELSE ntext26 END,ntext27 = CASE WHEN ntext27 IS NOT NULL AND CONVERT(ntext,ntext27) IS NULL THEN NULL ELSE ntext27 END,ntext28 = CASE WHEN ntext28 IS NOT NULL AND CONVERT(ntext,ntext28) IS NULL THEN NULL ELSE ntext28 END,ntext29 = CASE WHEN ntext29 IS NOT NULL AND CONVERT(ntext,ntext29) IS NULL THEN NULL ELSE ntext29 END,ntext30 = CASE WHEN ntext30 IS NOT NULL AND CONVERT(ntext,ntext30) IS NULL THEN NULL ELSE ntext30 END,ntext31 = CASE WHEN ntext31 IS NOT NULL AND CONVERT(ntext,ntext31) IS NULL THEN NULL ELSE ntext31 END,ntext32 = CASE WHEN ntext32 IS NOT NULL AND CONVERT(ntext,ntext32) IS NULL THEN NULL ELSE ntext32 END WHERE datalength(ntext1)=0 OR datalength(ntext2)=0 OR datalength(ntext3)=0 OR datalength(ntext4)=0 OR datalength(ntext5)=0 OR datalength(ntext6)=0 OR datalength(ntext7)=0 OR datalength(ntext8)=0 OR datalength(ntext9)=0 OR datalength(ntext10)=0 OR datalength(ntext11)=0 OR datalength(ntext12)=0 OR datalength(ntext13)=0 OR datalength(ntext14)=0 OR datalength(ntext15)=0 OR datalength(ntext16)=0 OR datalength(ntext17)=0 OR datalength(ntext18)=0 OR datalength(ntext19)=0 OR datalength(ntext20)=0 OR datalength(ntext21)=0 OR datalength(ntext22)=0 OR datalength(ntext23)=0 OR datalength(ntext24)=0 OR datalength(ntext25)=0 OR datalength(ntext26)=0 OR datalength(ntext27)=0 OR datalength(ntext28)=0 OR datalength(ntext29)=0 OR datalength(ntext30)=0 OR datalength(ntext31)=0 OR datalength(ntext32)=0 ;</value>
<text />
</action>
<action name="tsql_stack" package="sqlserver">
<type name="unicode_string" package="package0" />
<value><frame level='1' handle='0x02000000C81D290047D9F957FDC9CF5FB9CB20A5D2DF3857' line='1' offsetStart='1824' offsetEnd='2152'/></value>
<text />
</action>
</event>
</RingBufferTarget>
can you help with this error. -
WRT54G v3 "upgrade are failed"
I am running the WRT54G router, version 3, and trying to upgrade the firmware. It's been locking up and losing my wan connection on a somewhat regular basis and I thought the upgrade would help.
When I try to upgrade to the latest firmware I get "Upgrade are failed" while the progress bar is at about 20%.
Basics:
WRT54G v3
have upgraded firmware since purchase - currently running 4.20.6
trying to upgrade to WRT54G version 3 firmware version 4.30.5
PC running windows XP
I am connecting via wired, not wireless.
Attempts:
1) Logged into router through web interface and went through Administration-->Firmware Upgrade
Result: Failed
2) Downloaded firmware again (in case it was corrupted) and tried through web interface
Result: Failed
3) Hard reset of router - held down power 30-40 secs - then tried update through web interface
Result: Failed
4) Downloaded tftp program and used it
Result: Failed
Can anyone give any other suggestions or tell me if they've successfully upgraded to this version of firmware?
Thanks!!Try this:
1. Disconnect all the devices from the router. Only the computer used for the upgrade should be the only device wired to the router. Even the modem shouldn't be connected.
2. Reset the router for 30 seconds. The IP address of the router will be back to 192.168.1.1 after the reset.
3. Disable all firewall and security software on the computer.
4. Set a static IP on the computer. Use:
• IP: 192.168.1.5
• Subnet: 255.255.255.0
• Gateway: 192.168.1.1
5. Force your network adapters speed to 10 Mbps Half.
6. Make sure you could still ping the router's IP address (192.168.1.1).
7. Upgrade the firmware thru the web user interface (Administration tab. Firmware Upgrade tab.).
8. If it fails, use the TFTP utility.
9. Reset the router for 30 seconds after a successful upgrade. -
Linksys WRT54G "Upgrade are failed!"
Hi
I have Firmware Version: v4.21.1 and whenever I try to upgrade it to the latest one it says "Upgrade are failed!"
Solved!
Go to Solution.No. You must only use firmware versions for 2.2, nothing else. Firmware version 4.21.1 is the latest so there is no need to upgrade.
-
WAP121 - Firmware upgrade has failed
Hi,
I get the message "Firmware upgrade has failed. Please ensure that valid entries were specified in the required fields." when I try upgrade the firmware
rootfs.bin over http/https. Someone an idea?
I have downloaded the release 1.0.2.3 and 1.0.1.10 from
http://software.cisco.com/download/release.html?mdfid=284152657&flowid=32562&softwareid=282463166&release=1.0.2.3&relind=AVAILABLE&rellifecycle=&reltype=latest
My hardware:
WAP121-E-K9 V01
Firmware Version: 1.0.0.3
Regards
JackHi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
It looks like you pulled the bin file out of the tar file you downloaded. Please try to do the upgrade with the tar file. I believe that is what the WAP is looking for.
Let me know how that goes.
Thanks
Eric Moyers .:|:.:|:.
Cisco Small Business US STAC Advanced Support Engineer
CCNA, CCNA-Wireless
866-606-1866 ext 601027
Mon - Fri 09:00 - 18:00 (UTC - 05:00)
*Please rate the Post so other will know when an answer has been found. -
WRT54GS "upgrade are failed" is what i get when i try to upgrade.
i get into the router page , click on administration, click firmware upgrade, click brouse button to find the firmware i just downloaded , the file ends with .bin, and when i click upgrade, it says "upgrade are failed". any more ideas, i don't like this router..
hi....this error message comes up when you select a wrong firmware file from the website.....
ensure that you select the right model no and version no of the hardware unit....download the firmware and if is a zipped file , unzip it first and use the "bin" file for upgrading the firmware....or else if you directly get a bin file on the website , save it and through the ui , upgrade it...
one more option is to download " tftp.exe " file from ftp.linksys.com/pub/network and save it first... then run the exe file....here under server will go the router's ip add , enter the router password under the password field and browse the firmware file...then click upgrade.reset the router for 30 secs and then reconfigure it... -
I tried to upgrade my firmware for my WRK54G router with the file that I downloaded from the Linksys website twice and I keep getting an "Upgrade are failed!" error message. Any suggestions?
Disable all firewall & antivirus software on your computer .....
reset the router for 20-30 seconds ......
Again download the firmware from http://linksys.com/download .....
Maybe you are looking for
-
Vendor not coming in RFQ from PR
Hi, I created PR, and i checked source determination and i got fixed vendor in PR from source list... Now while creating RFQ wrt above PR, i am getting entire details along with vendor...Now after clicking adopt + details, i can see all details of PR
-
After a faulty line was replaced between me and th...
As above realy, its been connected solid for over 3 days @ 7.4MB, wich is great arround here, i used to get that before the fault and get about 7mb download speed, Why is my profile not rising to meet the connectin speed? would i need to wait the ten
-
How to make PDF of iphotobook made on ipad?
How can I make a PDF file of a iphotobook that i am making on an ipad so I can transfer it to my iMac? I'd like to proof it on a larger screen.
-
The issue is when a USER tries to open a program, and it's mapped to a network drive T:\fixedast\app.exe they get the tittle error message. If i log in as admin, it opens up just fine. Ideas? The user can remote desktop to the RDS server and open the
-
How can I sink all photos in iPad to mac pro
I use iCloud and I can't seem to photo stream my photos from my iPad to mac.