Creative zen extra (60 gb) problem with playli

Hi i have reached 52 playlists and i cant add anymore! I get an error each time. If i delete a playlist.. i can add a playlist. But i cant go past 52!! I have tryed updating the firmware, and i reformatted my hard dri've too.
Still no luck!! I cant find any information on this problem, so some help would be much appreciated. Its not my hard dri've space because i have 25gb left!
thanks
Message Edited by emariachi on 08-26-2005 07:26 PM
Message Edited by emariachi on 08-26-2005 07:27 PM
Message Edited by emariachi on 08-26-2005 07:28 PM

Funny thing is I can get 53 playlists, and I am really anoyed, cause it leaves my hard dri've just over half full, Creative really need to address this problem if they want customer loyalty. Also it would seem you can only ring or e-mail them while the kit is under warranty, GREAT ******* GREAT

Similar Messages

Please ! creative zen touch 20 gb problem with firmw

okay hallo,?yesterday i wanted to update my fireware, then my pc restartet. and the updating doesn't finish.now i'am at the Recovery Mode with this 4 point. i tried every point but it doest help.and wenn i start the player it says..fireware problem. so i musst put new firmware on my player, right ? but how can i do this ?wenn i start the firmware update.exe it says that there is no connection with the player.please tell me in steps what to do ...or is there no help anymore ?please !!Message Edited by bugati on -3-200605:45 AM

it's the blue power light, not the backlight. and no, i havent tried calling costumer service yet. i read another topic about how this happened to someone, and they said the little light eventually made the battery go dead and when they plugged it to charge it, it worked. so i figured i'd try that. but i have to take a really long train ride in 2 days and thats going to SUCK without music, and i don't think the battery will be dead by then. so i think i'm going to call costumer service

Creative Zen Touch...problems with getting it to turn

ok so last friday im on the bus going to school....normal day no big deal listening to music watching kids make fools of themselves...but back to the point, anyway we pull into school so i hit power button and it says "Shutting down.." so i put the 'hold' button on and put it in my backpack...well i get out of school get on the buss pull it out and it still is saying "shutting down". seems to be caught in a continuous shut down cycle because it wont let me do anything so i put it in my bag and wait till i get home...well stupid me i forget about it until i pull it out monday and it wont turn on....what should i do...the blue light just flashes as i try to turn it on....thanks

attach the player to the adapter, while attached hold play and press the reset button, it will start up in recovery mode, leave it there for a few hours to properly charge the battery, then attach to computer and run firmware update

Creative Zen Extra stuck in Res

I accidentally took my Creative Zen Extra through customs, and so now its stuck in Rescue Mode. Whenever I try the 'clean up' option, nothing happens. The other 3 options 'format all' 'reload OS' and Reboot do nothing. On the format all and reload OS it says harddisk problem. What can I do to save my player?

out of nowhere, i tried to turn it on. I took out the battery, and the cover was off. I replaced both, plugged it into the wall...and it turned on like normal, and has continued to function as it should...i have no idea how it happened. All my music was still there as well. It sync'd with my cpu fine also

Creative webcam dell studio 17 problems with creative zen

hi there, ive got a dell studio 17 with a built in webcam.
When i try to install the drivers for the creative zen, and put the disk in, a message comes up saying 'we could not find the driver software for your device'
then windows trys to solve the problem and comes up with a message saying 'this problem was caused by a compatibility issue between this version of windows and yor webcam which was made by creative' 'go online to download and install the update for your webcam'
however i try the website they gave me, which is the creative support page, but i cant find a built in webcam for the dell studio 17
i was just wondering whether the answer is right in front of my eyes, or if anyone else had this problem

Hello MichelleStudio!
The only thing that comes to mind to help you out here is to try to visit Dell's support website and update your hardware drivers and/or firmware. To get to your model's specific downloads click on "Drivers & Downloads" and choose the Service Tag option. It asks you for your Service Tag which is on the bottom of your laptop. Then it will bring you to a list of available downloads.
Make sure the operating system is set to Windows Vista 64-bit, as this is what your laptop came with. The important ones to update are BIOS and Chipset. But since I don't know specifically what is causing your problem, it's kind of a guessing game.
This is assuming you can get your laptop to boot up long enough to perform these updates. You said that the error said something about a driver, so hopefully updating your hardware drivers and firmware help.
Hope this helps, thank you for posting!
Jacob|Web Planner | Best Buy® Corporate

Creative zen firmware update now trouble with creative media sou

I wanted to start downloading music from an online store and was advised that I needed a firmware upgrade for my creative zen, which I did (version 2.2.02) and could download music. However since I have done this my zen is no longer recognised when I connect to my pc - which is running on Windows XP. I took advice from creative and reloaded my firmware after starting my player in recovery mode and then I reloaded the creative media source organiser software. After that I could find the player in the organiser but everything was laid out differently with all my music in folders which made it really tricky to navigate.
The icon is this grey thing which doesnt look like a creative at all! Although I can move files around it is still not recognised on the bottom right of my pc and I can't safely remove the hardware because of this. I am also having problems with syncing from the pc library to the zen and it is not picking up duplicate files but adding them again so I am getting loads of copies of the same music - nightmare. When I am deleting it is just not recognising and I have been through this process a few times now and its getting pretty tiresome!
Should I reinstall the organiser again and do a clean up in recovery mode?

The Zen MicroPhoto is an MTP Device.
Minimum System Requirements:
Microsoft? Windows? XP (Service Pack or higher)/XP 64-bit
You might find a work-around for not having the minimum system requirements in this thread or this thread.

Creative Zen Touch - Hard drive problems - HD upgr

Hi!
I bought my Creative Zen Touch almost a year ago now. Yesterday my hard dri've went crazy. The sound was a funky rythm, 0 DJ "scrathes" then one more high-pitched sound. In the Rescue menu I try to format the hard dri've and it responds with "Hard dri've problems."
Yes, it has fallen down several times. I don't know what caused it to malfunction this time though. It suddenly just stopped working. It looks like a mess, was bought over internet under the name of a mother of my frien; to make a long story short. I have no warranty :/
So here's what I decided; I opened it up to take a look inside it. Here's what I found:
- One loose battery, too much dirt on the sticky stuff.
- One hard dri've, model: HTC424020F7AT00
And here is my main questions:
- Can I use a 40gb Hitachi dri've in my 20GB Zen Touch? This is just the big brother, so the dri'ves are pretty much the same except storage space. http://tinyurl.com/4yurr
Thanks
- KennethMessage Edited by Kgjersda on 09-6-2005 04:4 PM

Tweaking 'n' Hacking Your Creative Zen Touch 20GB
Thanks for your reply SSR. I'm a clueless as to what the controller is, but at least I've found out that the Creative Zen Touch 20GB uses a .8" harddri've. So the larger Fujitsu Siemens 2.5" dri'ves, which the Creative Nomad Zen Players use, aren't compatible.
For anyone reading this post who wants a step-by-step guide to upgrading the harddri've of a Creative Nomad Zen Player (but NOT the Creative Zen Touch 20GB), visit PC World magazine online for a "how to" article: http://www.pcworld.com/howto/article...67,pg,7,00.asp
<IMG src="http://images.pcworld.com/howto/graphics/9267-2303p075-7b.jpg">
If anyone has experience of tweaking/hacking the Creative Zen Touch 20GB or if anyone should come across a similar "how to" guide for upgrading its harddri've (and knows of specific models of compatible .8" hardri'ves) - then please post on this forum.
Cheers........... Tim Holmes.

Zen vision:m chargin problem with USB ca

I've got vision:m for months , and during this time I used to charge with USB cable , and didn't have any problem , but it doesn't charged earlier , actually I hooked it up to my USB last night , and there was blinking icon up to today , but no any progress . so I use its original cable(electricity) and?it's going to charge?.Should I going to warranty company for this problem(doesn't chargin with USB) ?thanks for sharing your mind ( and pardon for my english )?Message Edited by MTahmasebi on 2-3-200604:5 PM

KRe: Zen Vision M Firmware Problem!!! Can't deal with this thing any more..._
menios wrote:
So you say that I actually have the Windows Media Player 0, because my Zen is being recognised..
I have rebooted it several times but its just the same thing...it shows firmware problem!!
Why isn't this player working?I've seen many people, not only from here, who have the same exact problem and they gave up on their mp3... I dont have this kind of luxury to buy a new one!!I don't know whether Creative has put on this a "time bomb" or is just faulty, but I really wish it could be saved..
I'm saying it is WMP0 because the firmware file sees the player. The computer can recognize it but with WMP components that firmware file would be grayed-out..So when you reloaded the firmware did you choose "reload firmware" Before you connected it's?(That is what erases the firmware prior to uploading the firmware. If you did not do that it could cause it to fail.Do these ste
ps.
Open the firmware file,On the player format>cleanup>choose reload firmware, then connect & run the firmware file.

Creative ZEN 4GB is not connecting with

Hello Everybody!
I've bought CREATIVE ZEN 4GB mp3 player, and after some two months, i can not connect the player with pc. So i reinstalled my windows, because i thought it was some problems with whem. After installation, everything worked twice, and then, is the same problem happened. So i reinstalled windows a second time, but doesn't matter, how many times i reinstall them, it's same problem. After that, i've tried to contact costumer support, but all they tried to help me, was unsuccessful. So few weeks ago, i deleted the MTP Device from "device manager" And now, all the time i have a bubble on the left lower side at the screen, with a note: "Found New Hardware: MTP Device" And i can't turn it of, every time i do that, it shows again. At device manager, on MTP device i have yellow exclamation mark. When i'am trying to update driver, i have this error: There was a problem installing this hardware: MTP Device.
This Device Cannot Start (Code0)
The only thing i can do, charge my mp3 player. And sometimes i using the player on the really old computer, and its works properly, but the worst thing, that the old computer is not mine anymore, so i can't do anything with a mp3 player.
So if someone, has problem like this, and someone, who resolved it, please help me. I like this player very much, and i dont want to change it.
Thank You!

Yes, it is possible. On the right hand side of the player is the slider to turn on the player, push the slider upwards to the lock position and the screen will turn off. That is the Hold mode. At this mode, all the buttons would be inaccessible to prevent accidental pressing of the buttons. This is the mode to use when you are just playing music and do not need the display.
To unhold the player, just push the slider to the middle position and all the way down to turn it off.

ZEN Xtra 40G has problems with protected content bought from MSN Mu

I bought a few albums from MSN Music. These songs are the only ones I have ever had problems with.
Basically When I am playing one of these songs and try to Fast Forward through the song I get a Playback error and the player locks up. Also If am playing one of these songs and shut off the player, when I turn it back on It says the song is playing and there is no music (It is locked up).
Also I have another issue, although it may be by design it is pretty annoying.. If I try to play these songs through media source when I have my Zen extra connected with a USB cable media source returns with. "The selected file is protected and cannot be played in media source".
Anyone else having similar issues with protected content?
I have already upgraded my firmware and driver..
Thanks,
BrianMessage Edited by bpfinch on 0-07-2005 05:22 PM

I've never used WMAs, let alone those with DRM. At a guess the license probably prevents you from copying back to the PC i.e. it's a one way only transfer.
I think you need to check with the music store you bought from as to whether you can download the tracks again to your PC. This is one of the irritating things about WMA and DRM, although perhaps there are methods to back the files and the licenses up. I don't know enough about the technology, but suffice to say for the moment I'm steering clear, buying CDs, and using MP3 to encode them.

Creative Zen Xtra Firmware Upgrade Problems v1

While trying to upgrade the firmware on my Creative Nomad Jukebox Zen Xtra, there was a problem with the upgrade. I'm now stuck in rescue mode v.3. When I plug the MP3 player into the computer, Windows will recognize it and asks me what to do. I exit that window and try to run the firmware update again. The firmware program tells me "Your player is not connected, please connect your player."? there are 2 options "Upgrade" and "close". Upgrade is greyed out, but close is clickable. I've tried
1. clean up,
2. format all,
3. reload OS and
4. Reboot.
None of those options seems to do me any good. I've uninstalled all the Creative software from my computer, but still no luck. Please help me. I'm doing my best to avoid having to go buy an iPod, but if I can't get my Creative Mp3 player to work, I guess I will have to. I have spent a lot of money between cables, the docking station and the leather case. I'd hate for all this to be wasted, so please help me.
I've tried to "reload the OS" and then clicked on the language the moment the Player told me to start the update. Someone please shed some light on this for me. I've tried email Customer Support. I've searched Google. I've put my best skills on it and of course I've scoured this website to no prevail. Someone help me out.

READ ALL BEFORE PROCEEDING You do need to install the driver. http://support.creative.com/Products...e=MP3+Players# When you get to the page for your player bottom left the manual selection choose Xp & clik submit the driver should be the first one version 2.0.00 .After the driver is installed when you plug in the player check in device manager to see that it shows up there Start>Control Panel> System>Hardware>Device Manager look under Portable Devices or for the name of the player. Use a rear USB Port to assure a good connection. Then run the firmware file on the computer ,choose reload firmware or Os on the player,choose language when player asks for update(the pop-up from windows indicating that it "sees" the device DO NOT CLOSE IT.)

Creative Zen Xtra stopped loading music with 5.7g space left? H

Ive been using my 30g Creative zen xtra for close to two years loading ripped cds using mediasource. I have .20.8 firmware and have had no problem.Last night with zen showing 5.7 gis of space left I tried to load a few ripped cds as usual using mediasource and usb. The action went the same as usual with mediasorce telling me songs were being tranfered but when completed they were not in player. I tried it a few tims with different usb ports and cords but still songs not in player. The only thing Ive done different is last week I used player interface to delete one cd and it went fine.
My biggest fear is having to reload close to ten thousand songs back into my Zen Xtra if i loose them trying to get transferring to work again. If I use the scandisc feature would that cause my library to need to be reloaded?Perhaps i should just leave well enough alone and just use the zen as a player of all my music and not try to fix it. I know there is 5.7 gigs of space left,I have been encoding my songs at 96 bites so space should not be an issue.Any help would be greatly appreciated. thanks [email protected]

mattg3 wrote:
Would clean up from recovery mode help solve this problem without loosing my music content?
Hard to say whether it will help but you can try. Cleanup shouldn't delete any of the content unless the player has gone completely haywire.
Jason

Creative Zen Vision M Vista Problem(s

I have recently purchased a creative zen vision M and its a great player. However I am having problems with vista ultimate 64 bit edition, it seems everytime I connect my player it stalls the player (it locks on the dock screen) meaning I cant access files on the player. I have the lates creative media source , play for sure plugins and the latest firmware (it dident stall before I put the latest firmware on)
THe player docks fine on my spare Windows XP machine, but it would be nice to have it dock with my primary machine which is sadly vista :P lol
Any advice/comments ?
Thanks

here try this, work for melink

Creative Zen Vision M Display Problems

I purchased a Creative Zen Vision M MP3 player around 2-3 years ago and it's been great so far. I've even bought most of the accessories for it!
I switched it on today and found that there was a problem with the display - it's gone taint and there are stripey lines across it. Any idea what this might be?
I've tried to reset it and plugged it into the television through the AV function and it displays just fine on the television.
I've sent off an e-mail to Creative but just wondered if anyone has experienced something similar? And if so, how did you get it working again?
Many thanks,
Dan

thedanholt wrote:
I purchased a Creative Zen Vision M MP3 player around 2-3 years ago and it's been great so far. I've even bought most of the accessories for it!
I switched it on today and found that there was a problem with the display - it's gone taint and there are stripey lines across it. Any idea what this might be?
I've tried to reset it and plugged it into the television through the AV function and it displays just fine on the television.
I've sent off an e-mail to Creative but just wondered if anyone has experienced something similar? And if so, how did you get it working again?
Many thanks,
Dan
Replace the screen that is a hardware problem. http://cgi.ebay.com/ws/eBayISAPI.dll...n%3D4%26ps%3D0? Here is a source to purchase a new one? http://www.youtube.com/watch?v=_Drkr...e=channel_page? & a video to dismantle the player.

Creative Zen Vision: M Software problems, player not detec

hi, i just got a creative zen vision: m a couple of days back and i've had problems with it being detected by my computer. i've installed the software but when i connect the player to my pc, it shows up for about a second then it's not detected anymore. i brought it back to the store for them to check and it works on their lap-top. any ideas?Message Edited by wongkenji on 08-06-2006 08:26 PM

wongkenji wrote:
hmm.. something just struck my mind, do you think my printers could be affecting it's i'll go back and try later, hopefully it'll work. otherwise i have no idea lol.. thanks for the help!
Hmm, your printer?
I sort of doubt that...hmmm.
Did you contact CS?

Creative zen extra (60 gb) problem with playli

Similar Messages

Maybe you are looking for