CRM Channel Managment - released quantity update in contract

In the channel management , the claims are created throught the transaction cms_rtcm.
Which should finally update the released quantity in the contract.?
Now in this process I see only CMS table CMSD_CNT_PRD_XT getting updated.And I donot find any means by which the CRM table CRMD_CUMULATED_I is updated,
from which the released quantity is obtained.
Can anybody tell me how is the released quantity updated in this scenario?
Thanks in advance
Chitra.P

Try modifying the qty thru FM CRM_SCHEDLIN_PUT_OB.
This should solve the issue.
~Kiran

Similar Messages

  • CRM channel management reporting in BW

    Hi ,
    what data sources are used to pull data from CRM channel management to BW.
    What kind of reports are built on this and wht is the functionality.
    If some one have already worked on this module ..can you please post some documents or links.
    Appreciate your response.
    Thanks
    venkata

    Channel analytics provides information about how you sold an item. Which channel did you use u2014 Interaction Center (IC), Internet, a partner, or direct sales? Channel analytics answers the questions u201CHow effective was this channel?u201D and u201CWhat can you do to make it more effective?u201D For example, you can create a useful channel analytics report that shows sales broken down by channel to see how much of your business comes over the Web as opposed to direct person-to person (field) sales.
    Check the link below:
    [http://help.sap.com/saphelp_nw70/helpdata/en/f4/198213acabce4baa10d5705da562e7/frameset.htm]

  • Not recalculate value "Release Quantity" in a Quantity Contract

    Hi all, did you get a solution for this issue? In a quantity contract, for an item we defined the target quantity = 72 and linked this item to 2 Service Entry Sheets, each one with entered quantity = 36, and then were released. After that, for one of this Service Entry Sheet  the release was reset and all items were deleted.  However, the value for the field "Release Quantity" in the contract doesnu2019t was recalculated. The value continue being = 72, and should be 36. Therefore, at the time to try to create another Service Entry Sheet appears the error "The entered quantity exceeds the target value in the contract".
    Thanks in advanced for you help.

    Can you check the result of report RMCONTK1 in test mode?
    Also check notes
    1237184  ME21N/ME31K/ML81N: Problems when referencing srv.
    614965   Inconsistent quantities for contract release orders
    Regards

  • Channel Management u2013 High Tech Integration

    Hi All,
      Right now we are working on Implementation for High Tech Channel Management. Can any one Help me How we integrate CRM with R3 for High Tech Scenarios.
      As per I know when a Transmission message ( Tcode - CMS_TM ) comes in thru EDI, I need create a Delivery/Billing for credit memo request in R3 when it is released. I donu2019t know the Complete process.
      My main Question is how we integrate this process with CRM to R3. Do we use CRM Middleware to do this? If so, what Replication Object we use for this in CRM. Currently I have found a Publication 'All CMS contracts (MESG)' with BDoc BUS_CMSCON_MSG will it support Channel Management High Tech scenario (Process which I mentioned above).
    Kindly advise on this as I am new to High Tech Channel Management. It would be appreciated if you able to explain me the process of Resale & Claim Transmission and Price Bucket and its backend Integration Details.
    Thanks in Advance

    You might find some information in this document:
    <a href="https://service.sap.com/~sapdownload/011000358700000876192006E">SAP High Tech - Business Suite 2005 - Master Guide</a>
    Tell me if you can't download it using this link. I can mail it to you.
    Regards,
    Kaushal

  • Serveral questions to CRM On demand release 16

    Hi All,
    I am using trial version of Oracle CRM On Demand release 16, and I have serveral questions to ask:
    1. In the help document "Administering Oracle CRM On Demand/Business Process Management/Creating workflow Rule Actions" mentioned that we can create an Update value action but I can't find this function in workflow rule action.
    So do we have to pay for this function just as "Assign a Book action"?
    2. I can't add new values to Service Request's Status picklist, it's a read-only one.
    Is there any way to achieve this?
    Thanks for any suggestion!

    Hi
    1.The Action 'Update Value' is availble under Triger Event-'Before Modified Record Saved'.
    I am not sure why you have to pay for "Assign a Book action". Thats out of the box functionality.
    2. Yes, SR status is a read only picklist. One workaround I can think of is to create a Custom field for Status. Then run a WF to sync the values of the Custom Status field with the Original Status field (particuluarly the Open and close values. That will maintain the integrity of all the SR matrices).

  • How to create release order for value contract?

    dear experters,
    I create a value contract by T-code:va41, order type"WK1".I set a Assortment module to this order and mateirl "WKM1" to  it.
    then I create release order by T-code:va01 with refrence to this value contract,but it set the material "WKM1"  to the sales order, and I can't modify this material! I want to put another material which belong to the assortment module in the value contract. I want to know how.
    thanks.
    Best regards
    lance

    Assortment Module for Value Contracts
    This function enables you to define a list of materials that can be released from a value contract. Materials can be assigned to more than one assortment module.
    An assortment module is an entry tool and can be called up from the value contract. It is valid for a certain time period.
    If you delete a material from the assortment module, to which a value contract refers, you will be unable to release that material.
    In the value contract, only materials with the same sales organization and distribution channel as the value contract can be taken from the assortment module. All the other materials in the assortment module are not displayed in the value contract.
    To fulfill both these requirements, two types of value contracts are offered in the standard system:
    Value contract type WK 1
    You can specify a product hierarchy or a assortment module for value contracts with contract type WK 1. The system will always propose this type of contract, if you want to create a contract for several materials or a certain group of materials. All the materials in the relevant assortment, or belonging to the specified product hierarchy are then relevant for release.
    Value contract type WK 2 (material-related)
    You can create contracts for one material (usually configurable) with this type of value contract. A software company is an example of where this kind of contract is often used. There, a contract for the value of $500,000 is made with the customer for one specific software product.
    You can also agree on the length of the contract for this type. The contract duration can be agreed at item level and can be different from the contract duration specified at header level.
    You can store special price agreements for the value contract. These price agreements can then be used at any level. For example, a value contract can contain prices for individual materials, or discounts that are valid for every released material.
    Release Orders
    The customer fulfills a contract by issuing orders against the contract. The contract does not contain any exact dates for deliveries, so you need to create a sales order to release against a value contract.
    When a release order is created for the contract, the system automatically updates the released values in the contract. The release order value is calculated from the total of the open order and delivery values, plus the value that has already been billed to the value contract.
    The system also updates the released value for subsequent changes (for example, overdelivery of contract release, price changes in the billing document, partial deliveries, returns, rejection of order items, cancellation or reversal of orders, deliveries or billing documents).
    You can create a release order in any currency. The system automatically converts this currency into the one agreed upon in the value contract on the pricing date for the contract release order.
    Creating Assortment Modules for Value Contracts
    Procedure
    To create an assortment module, proceed as follows:
    1. From the initial screen choose Logistics >Sales and Distribution >Master data.
    2.Choose Products >Value contract - Assortment module > Create.
    You will then be in the Create assortment module: Initial Screen.
    Module type 6 is defined for the value contract.
    3. For external number assignment, enter a module number.
    You can then use existing modules as a reference by entering the name of the module under reference.
    4. Choose Enter.
    5. Enter a short description for the module.
    6. Enter a validity period for the product proposal.
    During a release, the system checks if the release date lies within the validity period.
    7. Create the materials that you wish to assign as items to a module.
    You can display a list of materials as a product proposal, which you can then copy into the assortment module. To do this, choose Suggest material, enter the selection criteria in the subsequent screen and copy the selected materials to the items. Use Edit > Delete item to delete the materials that you do not want to copy to the assortment module.
    8.Save your entries.
    Also Please check the copy control in VTAA
    Regards,
    Anbu

  • Duet Enterprise 1.0 with CRM Sales Management

    Hello,
    we heard that Duet E 1.0 with sp2 with Business Packs releasing in June 2011.
    1. Any idea when Duet Enterprise BP1 will release  ?
    2.  is CRM Sales Management and Oppertunity Management is covered in this
    3. before implimenting bp1 do we have to impliment duet enterprise 1.0 with sp2.
    4. Can we directly integrate CRM and SharePoint 2010 with duet E.
    Regards,
    Shashank

    Hi Shashank,
    1. Any idea when Duet Enterprise BP1 will release ?
    The plan is to release BP1 (or Feature Pack 1 as it is called) in Q3/Q4. The nomination for the Ramp-up has started. If you are interested you can apply via the [Online Scoping|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000715662&]. Enter your customer data and select "Feature Pack 1 for Duet Enterprise 1.0 " in the next step.
    2. is CRM Sales Management and Oppertunity Management is covered in this
    Feature Pack 1 will cover some contact-based scenarios of CRM.
    3. before implimenting bp1 do we have to impliment duet enterprise 1.0 with sp2.
    You can start with Duet Enterprise 1.0 SP02 right now and later update to Feature Pack 1 (by this you will already have done some mandatory steps like setting up the trust between the SharePoint and the SAP system already). If you do not want to start now, you can also wait for Feature Pack 1 and then start a fresh installation.
    4. Can we directly integrate CRM and SharePoint 2010 with duet E.
    There will not be a "full-out-of-the-box-scenario" for CRM integration in SharePoint. However, the focus is much more on providing building blocks that makes the integration of CRM simpler and faster.
    Regards,
    Holger.

  • 40TL838: good video, terrible channel management.

    Hello from Italy,
    I recently bought a Toshiba 40TL838.
    While I'm satisfied of the video and the audio features, I think the channel management software is inadequate for a device of this level.
    This is a list of the flaws I found, I hope you can give me some solutions or at least some info about updates.
    1 - Once the automatic search is finished, all the radio channels get numbers already belonging to TV ones. All these "duplicates" generate confusion and make the direct selection of a radio channel impossible. Example: if I want to hear the radio channel numbered 851 I can't press 8 5 1 because the tv will switch to the DTV channel that holds that same number.
    I rather have to select "List", scroll ALL the channel and select the radio I want to hear.
    If there were separate lists for radio and TV the scrolling would be easier, but it's just one big list.
    2 - There is no useful table of channels from which you can easily assign options to the channels (favourites, skipped etc etc). To assign those options you must tune in the channel, select "Quick", scroll the list, choose options, select the option you want and exit.
    In all, 9 clicks that you have to repeat for EVERY single channel. With hundreds of them in memory it takes hours.
    3 - The favourites menu, as it is, is totally useless. Once you've painfully chosen all your favourites with the above procedure, there is no way to make it your standard channels list. When you press P+ and P- you will still see all the non favourite channels. The only way to avoid them is going to "List", switch to favourites, scroll and select the channel. For the next choice, everything is back to the start because the favourite list is neither here the standard one. It's just quicker to just press P+ and P- thru all the channels, favourites or not.
    4 - It is possible to skip the channels from the options menu, but once again the lack of a channels table makes this procedure very slow. Wouldn't it be better to just DELETE all the channels you don't want? Example: I would delete all those "Pay per view" encrypted channels that I didn't subscribe for, or the many duplicates… but it's not possible. Why?
    It's the first time that I own a TV where you can't delete channels.
    5 - Once you assigned all the options - channel by channel with the 9 clicks procedure - if you make another search, even if manual and related just to a specific frequency, you LOSE ALL your preferences: numbers, favourites, skipped...
    This is crazy since it's normal to make a new search from time to time or just add a new channel that has been introduced.
    After I lost all the options, I just gave up and left everything as it came with the auto search, since i don't want to start from the beginning again. It's really frustrating.
    In all, a custom channel management is impossible.
    If I knew it was so bad, I wouldn't have bought this TV, which looked so nice on the store shelf. I hope Toshiba will realize how its software is not on pair with the quality of the screen and will release updates to fix it.

    You may want to contact Toshiba Europe. This site supports the US.
    - Peter

  • Verizon is releasing another update tommorow: ED05 did not fix the miss call problem

    I got  two voice mails today that did not show as missed calls . I call Verizon technical support and ask to speak to a  manager. He told me that several people are still having miss call problems and to expect a new update august 1 which is tommorow. I told him this is the last straw , if this new update doesn't work for me, they are going to have to give me a different phone or release me from my contract. This is so frustrating.

    I called Verizon 2nd level tech support and they assured me there is NO ED06 update's said they haven't even finished rolling out ED05 yet. I think they just told you that to get you off the phone. I also have a Fascinate and have had problems and can't get them to replace my phone with a different device. I want the Droid Charge since it is the only other one that has the AMOLED screen that I originally chose the Fascinate for . They had a program that ended on July 28th the day that ED05 rolled out. They offered the Droidx, the Incredible 2, and the Droid Charge to replace the Fascinates that were having trouble. I had called to report my issues during this replacement program but was not told that it was going on and now they won't give me the Droid Charge because it has expired. I think since there are STILL issues-they need to bring this program back and allow us to get a different phone. I have been a customer of Verizon for 10 years and have 7 lines so I am REALLY disappointed that they can't work with me (or other customers ) especially since it is not something we did to the phone. It is a problem with either Verizon or Samsung. I don't know where to go from here but maybe if they hear enough from others that didn't have any success with ED05 they will start to replace them. I will probably go to a higher level to voice my concern. Let me know if anyone has any success getting a new device especially the Droid Charge.

  • Release orders for value contract

    Hi Folks,
    I have question on value contract.
    Customer contract is fullfilled by issuing orders against the contract. When a release order is created for the contract, the system automatically updates the released values in the contract. The release order value is calculated from the total of the open order and delivery values, plus the value that has already been billed to the value contract. System checks this value with "Outline agreement target value" in value contract and issues warning or error message depends on configuration settings in value contract item catagory.
    We have business scenario where system has to check net value of value contract rather than checking "Outline agrrement target value" in value contract. Because we offer some discounts to customer in value contract thus net value of the contract differs from agreement value. So that system will issue error message when release order value exceeds net value of value contract.
    Is there any customizing settings available to meet the requirement?
    Awaiting for your inputs.
    Regards,
    Prabhaharan

    Hi,
    In transcation VTAA at item level have your own cory requirment code which will calcullate net value of the doc, hope this works out
    regards
    sriky

  • ISA iviews error in Channel Management Portal for partner portal

    I am getting the following error while accessing any iview which uses the GenericISAComponent or GenericICSSComponent in the Partner Portal. I am using CRM 5.0 and SAP Portal 7.0 (2004s).  What configuration needs to be done in order to make ISA iviews to work? If you have a link/document to configure ISA in the partner portal, please send me. I am using SAP provided business package for channel management.  Any help is appreciated.
    Errors displayed in the portal:
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.partnermanagercc/com.sap.pct.crm.chm.pmc.shop_management/com.sap.pct.crm.chm.isa.pmc.product_catalog
    Component Name : com.sap.pct.crm.app.channelmgmt.GenericISAComponent
    The exception was logged. Inform your system administrator..
    Exception id: 06:45_07/08/07_0075_13177350
    See the details for the exception ID in the log file
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.partnermanagercc/com.sap.pct.crm.chm.pma.service_center/com.sap.pct.crm.chm.isa.service
    Component Name : com.sap.pct.crm.app.channelmgmt.GenericICSSComponent

    I am still working on this one, but I think I ca help you a bit on the way.
    Keywords: EP7, ISA CRM 5.0
    When deploying BP for CRM in the portal the permissions on the component is set for the super_admin_role to be the owner.
    If you check the super_admin_role and assigned action you will find the Action : AclSuperUser.
    As a test you can  assign this action, AclSuperUser, to the role you are using and it should work. 
    For production purposes I can not recommend  to use AclSuperUser action to a normal user since this is very powerful action. I'm currentley investigation how to assign minimal permissions for the role I'm using to make the GenericICSSComponent work.
    Best Regards
    Jan-Erik Hov

  • CRM Grants Management - Grantor Implementation

    Hi
    We need implement CRM Grantor Management for grantors.  We have actually the following sap systems and components:
    1.SAP CRM 2007 u2013 CRM Application Server ABAP 
    Component Version:   SAP CRM 6.0
    2.SAP ENH PACK 4 FOR SAP ERP 6.0 u2013 Public Sector Accounting with the following components:
    Component Version:   SAP ECC 6.0
    EA-PS  604 SAPK-60403INEAPS - SAP Enterprise Extension Public Services
    IS-PS-CA 604 SAPK-60403INISPSCA - IS-PUBLIC SECTOR CONTRACT ACCOUNTING
    FI-CA    604 SAPK-60403INFICA   - FI-CA
    SAP_APPL 604 SAPKH60403         - Logistics and Accounting
    We do  not have a SAP Netweaver 7.0 BI but I have BW component in the CRM and ERP
    CRM -> SAP_BW  700  0020   SAPKW70020  SAP NetWeaver BI 7.0
    ERP -> SAP_BW   701  0003   SAPKW70103  SAP Business Warehouse
    and we have the component
    BI_CONT 703 0014 SAPKIBIIQ4 - Business Intelligence Content
    Is it enough to configure the Grants Management for Grantor?
    Please, I need to know if we need install aditional components.  Exist an aditional Public sector industry CRM package to install in the CRM 2.007 system?
    Thanks in advanced.
    OMM

    For CRM is fine..Should be great if you have CRM 7.
    Can you see this standard transaction type in your IMG:?
    GAG     Grantor Agreement     SAP Standard Grantor Agreement     BUS2000271 Grantor Agreement
    GAP     Grantor Application     SAP Standard Grantor Application     BUS2000270 Grantor Application
    GCL     Claim     Claim     BUS2000272 Complaint
    GCR     Change Request     Change Request     BUS2000270
    Also review if you have SPRO> Industry-Specific Solutions> Public Sector > Grantor Management  in SAP CRM.
    You can use the standard with business role "CRMGRMPRGMAN"
    Regards,
    Lyda

  • Problem when changing the target quantity for a contract

    Hello,
    I have a problem when i try to change the target quantity for a contract through the BAPI 'BAPI_CONTRACT_CHANGE'.
    I filled the tables 'item' and 'itemx' with new values. the BAPI 'BAPI_CONTRACT_CHANGE' returns no error, but after using the BAPI 'BAPI_TRANSACTION_COMMIT' I get an info message from SAP and the modification does not pass.
    In debugger I could locate the error. In fact, the appeal of FM 'ME_UPDATE_DOCUMENT is done with a table XEKKN with the new values of the quantity and a KZ code equal to ' I ' to insert, then it must have the value ' U 'for update .
    Is someone can help me to solve this problem?
    Thank you in advance.

    Have you tried selecting the page, and then changing the theme directly on that page?

  • How can I get order quantity for a contract

    Hi
    I can see ordered quantity on a contract screen (VA42/VA43) but would you please tell me in which table or tables this is stored or how I can get ordered quantities against a contract
    Regards
    Javed

    Dear Javed Ihsan      
    You cann't see the order quantity for contract, you can only see the target quantity for the contract.
    However you can even see the order quantity for contract but it will not have any value -(VBAP-KWMENG).
    You can only seethe target quantity for a contract-(VBAP-ZMENG).
    For the release order you have order quantity( VBAP-KWMENG)
    PLease check and revert
    Thanks&Regards
    Raghu.k

  • Organization Fail in CRM Organization Manager

    Hi all
    in Crm organization manager my organization status is fail but i can browse my organization
    I have a problem?

    Please check the import log file, log file most likely to be located
    the folder %appdata% \Microsoft\MSCRM\Logs 
    so open windows explorer on front end server and type " %appdata%
    \Microsoft\MSCRM\Logs  " in address bar, check latest updated log file and it will provide you more details regarding the failure.
    MayankP
    My Blog
    Follow Me on Twitter

Maybe you are looking for