CRM exchange rate delta download from ECC
Hi experts,
We are trying to download the exchange rate from ECC for the delta scenario. I've tried to schedule a job to run the program SMOF_DOWNLOAD with Object DNL_CUST_BASIS3, but it comes up with an err, which says "Error 004 DNL_CUST_BASIS3: No Initial Load if data distribution is active. Use Synchron. Load". Will anyone advice how to achieve the delta download for exch rate from ECC to CRM or what i did wrong in the program execution?
Rgs, Michelle
Hi,
you can check the object DNL_CUST_BASIS3 by t-code:R3AC3,
Delete Function COMPARE, Then can load again and check
Regards...
Arup
Similar Messages
-
Delta Download from ISU BP to CRM BP doesn't work
Hi Experts,
We are currently new implementing a CRM7.0 system which is connected to an existing ISU system. We now have an issue about the BP delta download from ISU -> CRM.
Replication Scenario:
ISU BP -> CRM BP, NOT SD Customer -> CRM BP. As ISU is the leading system to create BPs and in ISU a MKK BP will be created first then a SD customer will be generated based on a template. So the change of a BP is via BP transaction for MKK role, not via XD02 SD Customer.
Issue:
The middleware setting is done and initial download from ISU BP -> CRM BP is done and successful. However when I trying to change a BP (change a MKK BP via BP transaction) in ISU, the change is not replicated to CRM (no queues, no BDOCs). It seems the delta download is not triggered at all.
However, I have maintained all the settings based on the ISU Specifics on the Set-Up-and-Load Guide for BP. So the followings are maintained:
- ISU: COM_BUPA_CALL_FU maintained based on the Guide
- CRM: CRMC_BUT_CALL_FU maintained based on the note 757955
- CRM: V_SMOFEVOB maintained based on the Guide
- ISU: BTE table (T-code: BF31) maintained based on the Guide
After setting above, the initial load is working (necessary table like CRMCONSUM, CRMRFCPAR etc. are maintained otherwise the initial download won't successful). However, the delta download from ISU BP (MKK) to CRM BP doesn't work.
The only uncertain thing for me is the setting for ISU : CRMC_BUT_CALL_FU. In the Guide only one sentence saying CRMC_BUT_CALL_FU needs to be maintained both in CRM and ISU and details refer to note 757955. However, the note 757955 only talks about FMs for CRM not for ISU/ECC. So in ISU/ECC the table CRMC_BUT_CALL_FU I activated for the following entries:
BPOUT BUPA 0100000 COM_BUPA_MWX_CREATE_MAIN
X
BPOUT BUPA 1000000 BUPA_OUTBOUND_MAIN
X
BPOUT BUPA 2000000 BUPA_CREATE_CHANGE_POINTER
X
BPOUT BUPA 3000000 BUPA_OUTBOUND_ALE_MAIN
X
BPOUT BUPX 1000000 MDS_BUPA_OUTBOUND
X
CLEAR BUPA 0100000 COM_BUPA_MWX_CLEAR_FLAGS
X
CLEAR BUPA 1000000 BUPA_OUTBOUND_CLEAR_FLAGS
X
CRMIN BUPA 1000000 BUPA_INBOUND_MAIN_CENTRAL
X
CRMIN BUPA 2000000 ABA_FSBP_INBOUND_MAIN
X
CRMOU BUPA 1000000 BUPA_OUTBOUND_BPS_FILL_CENTRAL X
CRMOU BUPA 1000010 ABA_FSBP_OUTBOUND_BPS_FILL
X
CRMOU BUPA 2000000 ABA_FSBP_OUTBOUND_BPS_FILL
X
MERGE BUPA 1000000 MERGE_BUPA_CENTRAL
X
MERGE BUPA 2000000 MERGE_BUPA_FINSERV
X
MERGE BUPR 1000000 MERGE_BUPR_CENTRAL
X
PXYIN BUPA 1000000 BUPA_INBOUND
X
XIIN BUPA 1000000 ABA_BUPA_MAP_PROXY_TO_DDIC
X
XIIN BUPA 2000000 ABA_FSBP_MAP_PROXY_TO_DDIC
X
XIIN BUPA 2100000 ABA_FSBP_MAP_PROXY_TO_DDIC_1 X
XIIN BUPA 3000000 ABA_FSBP_MAP_PROXY_TO_DDIC_1 X
XIIN BUPR 1000000 ABA_BUPR_MAP_PROXY_TO_DDIC
X
XIOUT BUPA 1000000 ABA_BUPA_MAP_DDIC_TO_PROXY
X
XIOUT BUPA 9000000 ABA_FSBP_MAP_DDIC_TO_PROXY
X
XIOUT BUPA 9000010 ABA_FSBP_MAP_DDIC_TO_PROXY_1 X
XIOUT BUPR 1000000 ABA_BUPR_MAP_DDIC_TO_PROXY
X
Not sure if the above setting is correct or not (some of the setting may not necessary, is that will impact the delta download from ISU to CRM)
Also what's the purpose of maintain two tables in ISU/ECC (COM_BUPA_CALL_FU and CRMC_BUT_CALL_FU)?
Also I have read some notes that the ISU BP -> CRM BP delta download is not triggered by above tables, it is triggered by BADI PARTNET_UPDATE, is this true, a bit confused.
I am looking forward a solution from you experts.
Thanks,
LaurenceAny inputs experts?
-
Payment methods download from ECC to CRM
Hi Masters,
Due to some requirement, new Payment methods customised in ECC so have to download from ECC to CRM. How it download through delta download. Existing payment methods data updated with adapter object name # CUST_TSP_WRITE and table name # CRMC_BUAG_PAYM in crm. iam new to crm plz Could anyone tell me step by steps.
its urgent.......... plz........
thanks in advance.
Regards
SriHi Sri,
Payment methods maintained in ECC can be replicated to CRM via CRM download object DNL_CUST_PAYM in transaction R3AS in CRM. This updates the associated CRM table CRMC_BUAG_PAYM and CRMC_BUAG_PAYM_T.
If you wish to create payment methods directly in CRM, then you can do so via customizing in CRM through transaction SPRO >
Customer Relationship Management > Master Data > Business Partner > Business Agreement >Define parameters for Business Agreement > Define Payment Methods.
I hope this helps.
Best Regards
Gavin -
Issue with customer download from ECC 5.0 to CRM 5.0
Dear CRM gurus,
We are facing very strange problem regarding sales area and sales office in CRM 5.0 test system
During the download of an ECC 5.0 customer into CRM the BDOC is giving the following error - 'Sales office O 50000617 is not available' and 'Sales office O 50000617 sales group not maintained for sales area O 50000608 10 10'and Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
I just select the BDOC and reprocess it immediately. Now the customer is downloaded into CRM and BDOC turns into green. I am also able to see the sales office and sales area in the downloaded CRM BP.
The sales office 50000617 is very much there in CRM and is properly assigned to sales area 50000608 10 10. That's why, I should be able to reprocess the struct BDOC successfully.
But for some reason the sales office is not getting determined first time during the download. This issue is driving me crazy. This only happens with the customers with sales office. If there is no sales office in ECC customer (i.e. the field is empty) then there is no issue. This customer will get downloaded without any error.
Also the downloaded material doesn't have the sales area data.
This issue doesn't happen in our development system. The only difference is, sales org structure in development system is manually created and it is downloaded from ECC in test system.
Can you please advice me on how to solve this issue?. It is a bit urgent.
All valuable inputs must be rewarded,
Regards,
RajHi Gun,
You are the only one responded to my issue. I have allocated some points.
Yes. I have checked the assignment in CRM organizational model.
I did download the org. structure from ECC 5.0
All objects including sales offices are activated for determination and I have verified with green light
As per your suggestion if the sales area data is not matched between the two systems, then how come the error will not reappear during the bdoc reprocess?
What is missing during the first time bdoc process? Looks something is missing for validation module?
Any inputs?
Thanks,
Raj -
Equipment Download from ECC 6.0 to CRM 5.0
Hi,
I have made equipment in ECC 6.0 using the Transaction code IE01.
While trying to download it into CRM, the BDoc shows a validation error
I have activated the adapter objects EQUI_CONFIG and EQUIPMENT.
I will be obliged If somebody can give me the step by step process to download the equipment from ECC to CRM and the customizations to be done as a prerequisite.
Thank You
RekhaHello Everyone,
Iam trying to Download Equipments from ECC 5.0 to CRM 5.0.
Iam getting a Validation Error in the Bdoc CRM_EQ_DMBDOC.
The Error Message is <b>Assign a Base Category to the Product.</b>
I have the Base Hierarchy R3PRODSTYP Assigned to the Application
Product.
And i cannot edit the Hierarchy or Categories since they are Downloaded
from ECC.
Please let me know how to Specify a Base Hierarchy/Category for the
Equipments to get Downloaded as Individual Objects.
Thanks & Regards
Kumar -
Exchange rate should pick from TCURR based on custom date field added in MIGO
Hi,
In MIGO, FI document get posted by picking exchange rate based on the posting date. Through BADI(MB_DOCUMENT_BADI) we have added a field called translation date in MIGO screen, while doing GRN exchange rate should pick from TCURR based on translation date instead of posting date. We have tried this logic using substitution (GGB1) in FI accounting it is working fine in FB60 & F-02 transaction but it is not working with MIGO transaction. Please suggest some solution for this.
Thanks & Regards
Vinoth Kumar.MHi Maniraj,
This will a modification to existing system and it is not supported directly.
There are 2 notes of SAP for modification of translation date of BKPF.
SAP Note 574583 will activate a BADI kindly refer to it for details.
http://www.stechno.net/sap-notes.html?view=sapnote&id=574583
There is another one but is appilcable if material ledger is active in the system
Regards -
Modifying Hierarchy Node name in Query or during download from ECC
We have some hierarchies that we download from ECC into BI and use them in query to display as report for Income statement or Balance Sheet statements. The issue we want to resolve is when we download the hierarchy from ECC into the intermediate download process tags hierarchy name as prefix for the node name. So for example if the hierarchy in ECC is as below
ABC (name)
1000 (node name)
2000 (node name)
When its downloaded in BW it looks as below
ABC
ABC1000
ABC2000
We want to see hierarchy in BW same as ECC. I tried removing the prefix in the query with no success.
Since the table RSTHIERNODE has the prefixed also as node name so that's how it will be displayed.
I thought I will modify the download process (datasource) to remove the prefix but the delivered user exit EXIT_SAPLRSAP_004 get executed prior to select of the data.
Has anyone got any other suggestions?
Thanks for your time.
Edited by: SK on Oct 28, 2008 2:19 PMRavi,
Just checking. Did you create a authorization variable and added it in the query for that characteristic?
Gova -
Errors while transaction download from ECC- CRM
we are trying to download transactions from ECC 5.0 to CRM 5.0.
the initial download has stopped in between and we get an error "SysFail" in the Inbound queue (SMQ2). Information on this error is "The current application triggered a termination with a short dump"
when we try to analyze the short dump, it says the termination occured in the ABAP program :SAPLCRM_DOWNLOAD_MAP - in "FILL_BTM_PARTNER". In the source code you have the termination point in line 254 of the include program "LCRM_DOWNLOAD_MAPF37".
please provide pointers to resolve this issue .
thanks
RHfollowing is the place where the error is being triggered in the program, any suggestions?
Information on where terminated |
Termination occurred in the ABAP program "SAPLCRM_DOWNLOAD_MAP" - in
"FILL_BTM_PARTNER". |
The main program was "SAPMSSY1 ". |
In the source code you have the termination point in line 254 of the (Include) program "LCRM_DOWNLOAD_MAPF37
Source Code Extract
Line
SourceCde
number_int = <ls_bapisdpart>-itm_number. |
if sy-subrc eq 0. |
ls_btm_partner-ref_guid = ls_item_keys-guid. |
ls_btm_partner-ref_kind = gc_object_ref_kind-orderadm_i. |
endif. |
endif. |
*orderadm_h_guid
ls_btm_partner-orderadm_h_guid = ls_orderadm_h-orderadm_h_guid. |
*bp_partner_guid |
if lv_nrart = gc_partner_r3_types-customer. |
*-----AG, WE, RE, RG, etc. |
call function 'CRM_BUPA_MAP_CUSTOMER_TO_BP' |
exporting |
iv_customer = <ls_bapisdpart>-customer |
importing |
ev_partner = ls_btm_partner-bp_partner_guid |
exceptions |
partner_not_found = 1 |
others = 2. |
if sy-subrc eq 0. |
display_type |
s_btm_partner-display_type = |
gc_partner_no_type-business_partner_no. |
no_type |
ls_btm_partner-no_type = |
gc_partner_no_type-business_partner_no. |
else. |
if ls_btm_partner-partner_fct = '00000001'. |
>>>>>
message x020(crm_order_misc) with gv_logsys_r3.
endif. |
endif. |
if ls_btm_partner-task eq gc_bdoc_task-delete and |
ls_btm_partner-ref_kind eq gc_object_ref_kind-orderadm_i. |
special handling for deleting item partner. In this case the item |
partner must not be deleted but updated with the header partner |
insert ls_orderadm_h-orderadm_h_guid into table lt_header_guid. |
insert gc_object_name-partner into table lt_requested_objects. |
call function 'CRM_ORDER_READ' |
exporting |
it_header_guid = lt_header_guid |
iv_only_spec_items = true |
it_requested_objects = lt_requested_objects |
importing |
et_partner = lt_partner_header |
exceptions |
others = 1. | -
Equipment download from ECC 6.0 to CRM 7.0
Hi Guys,
I am trying to Replicate equipments from ECC 6.0 to CRM 7.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
SURESH.Hi,
go to ERP.
check there the table CRMRFCPAR
Is there an entry for OBJ_NAME EQUIPMENT?
If no create it.
If yes check this entry if everything looks fine.
Afterwards start a new initial load.
Best regards
Manfred -
Problem in delta changes from ECC to CRM for Customers created in CRM systm
Dear all,
I am replicating customers between CRM and ECC and vice versa. The Delta changes are replicating from CRM to ECC system, but not happening from ECC to CRM system.
I have created some customers in CRM system and changed some address data, those changes are perfectly updating in back end ECC system.
But when I make some changes for the same customer from ECC system, those changes are not updating back in the CRM system.
I could not get the problem where exactly is coming. I request your expertise to help me in resolving this issue. I believe all middleware and pide settings are correct.
Your suggestions are highly appreciated.
Best regards
Raghu ramHi Shanthala,
Thank you very much for your prompt response, I have checked Customer_main adapter object in R3AC1, no filter has been found there.
and in R3 table TBE31, I could not find entry for CRS_CUSTOMER_COLLECT_DATA for APPLK = BC-MID.
As well in CRMRFCPAR table I could see X assigned to field named with 'In Queue Flag', but I could not find DISCARDDAT for CRM (User) settings.
Kinldy help me to resolve the issue.
Your suggestions will be highly appreciated.
Best regards
Raghu ram -
Wrong exchange rate is transferred from CRM to ERP R3 via BDoc.
Hi All,
In CRM system, whenever quantity contract(QC) is created, it is sent to R3 with all details via Bdocs
Exchange rate of QC which is present in CRM is different than in R3.
But when same contract is opened in R3 in change moce and do some changes it re determine the correct exchnage rate and updates the same in contract.
But again when same contract is changed in CRM then again updates are sent to R3 with previous wrong exchnage rate.
Please tell how to see which exchnage rate is available in Bdocs at the time of sending.
Why is it not updating as per the exchange rates in R3.
Please give your valuable inputs on this.
Regards,
PrashantHi,
Yes We checked the Bdoc. Currency rate is correct in CRM side but when it is sent to ECC, it changed to something else value which does not exist in TCURR table of both systems.
Regards,
Prashant -
How to distinguish Delta download from CRM to Mobile from Initial download
Hi guys,
I checked out that when downloading from CRM to CDB (for mobile), the inbound queue is always CRI_XXX..._CDBI.
For data load from CRM to R/3, I remember that initial load and delta load, the inbound queue names would end up in differnet words (I for initial load, D for Delta load). But for load from CRM to CDB, it seems that only 'I' exists.
My question is, how can we distinguish delta load from initial load via the queue name? saying that the queue name is
CRI_CSA_BUPA_INIT_CDBI, can we simply judge that it's an initial load or delta one?
Thanks and best regards,
RaymondYes, CRI_CSA_BUPA_INIT_CDBI is the queue created for BUPA initial load from CRM to CDB. Delta loads from CRM to CDB would create no queues - they would be handled in the objects queue itself (for eg. CSABUPA*) queues.
Regards,
Ankan -
Price download from ECC goes to which condition maintenance group in CRM?
Hi all,
I have a question related to pricing download. If I am downloading conditions from ECC to CRM, how does the system determine that the condition type needs to go to which Application & Condition Maintenance Group in CRM?
Thanks in advance.Hi,
When u download pricing conditions from ECC to CRM the Application is always CRM and u need to create Condition Maintenance Group in CRM in SPRO path:
Customer Relationship Management>Master Data>Conditions and Condition Technique>Condition Technique: Basics>Create Maintenance Group
here u can create and add the conditions and Condition table as required.
Hope it helps,
Regards,
PePe -
Listing/Exclusion Conditions are not getting downloaded from ECC to CRM
hi,
I have created the customized table for listing/exclusion purpose as per the requirement.
I have created the middleware adapter for that object.(DNL_CUST_G804)
I have down the initial download and when I check the status it is green color when I check the records in CRM Table I did not find it.
When I check in the SLG1 the following error has been occurred
"No Entries Determined for the A Tables (Block 1)"
Message no. CND_MAP312
Diagnosis
No entries have been transferred from R/3 to CRM for one of the following reasons:
1. The R/3 condition table does not contain any entries.
2. The maintenance authorization has been transferred to CRM. This means that data in the R/3 condition table can no longer be downloaded from R/3.
System Response
Error message CND_MAP 312
Procedure
If this maintenance authorization has been transferred to CRM in error, this can be transferred back in exceptional circumstances so that a data download from R/3 is possible.
Condition records have been maintained in ECC server.Hi
i have the same problem , how did you solve it ?
regards
Jacopo -
Customer Master download from ECC 6.0 to CRM 7.0
Hello Experts,
We have an issue where the DELTA DOWNLOAD of a customer master is not working. Also, no BDoC is getting generated when the new customer is created in ECC.
This happens sometimes and not always. Any specific settings or any SAP NOTE on this?
Kindly help.
RegardsHello,
Since you've mentioned that this issue takes place only sometimes, I guess the TBE31 events are fine then. Probably have a look at SMQ1 of the ECC and check if the queue pertaining to CUSTOMER_MAIN is stuck somewhere.
Just cross check if settings in tables CRMCONSUM and CRMRFCPAR are proper.
Regards,
Rohit
Maybe you are looking for
-
Officejet L7780 will not install wirelessly on network.
Officejet L7780 trying to install wirelessly on Windows 7 64 bit machine. I have an AT&T 2Wire router, and I am running MacAfee on my PC. In the past I could install, but the printer would disappear and need to be reinstalled. I have upgraded the
-
Problem with DigiChat and java
I can't get into a chat room because of a problem with digichat and java
-
Warehouse management trasactional flow
Hi Experts, can any one tell me the trasactional flow of warehouse management with SD-functionality.where exactly it works pls do needful.urgent. my mail id is [email protected] ex like : va01-vl01n-vf01 regards veera.
-
Lightroom collections and Elements 11 Albums Sync?
Hello all I just upgrated to Elements 11 and am a beginning Lightroom 4 user. Can I sync my Elements 11 albums with my Lightroom Collections?
-
ValueChangeListener does not work if BackingBean is in request scope
I am using ADF selectOneChoice and populating textfields etc. based on the selection in the SelectOneChoice. I implement this thru a ValueChangeListener method in my BackingBean,and it works perfectly if the bean is in session scope. But if I put it