Crystal Reports 9 Save/Save As Buttons Not Responding

I'm trying to install Crystal Reports 9 on my laptop. The installation process itself goes well but yet when I create a new report and click either the Save or Save As buttons, absolutely nothing happens. No dialogue box pops up so I'm unable to Save the report. When I exit the program, it asks if I want to save Report1 and I click Yes and nothing happens either.
Any ideas? I've uninstalled, rebooted, reinstalled numerous times.
If you have any ideas, please let me know.
Thank you.
Roger

I would suggest you to manually register u201CFiledialog.dllu201D as follows:
1. Click 'Start' then 'Run'.
2. Type the following with quotes as shown:
regsvr32 "C:\Program Files\Common Files\Business Objects\3.0\bin\filedialog.dll"
The following confirmation appears: "DLLRegisterServer in C:\Program Files\Common Files\ Business Objects\3.0\bin\filedialog.dll succeeded".
Note:Path of filedialog.dll will be not exactly same because it depends on the versions.
Hope that helps!!
Regards,
Shweta

Similar Messages

Error Scheduling Crystal Report to save to Unmanaged Disk destination

When trying to schedule a Crystal Report to save to an "Unmanaged Disk" destination using the "Plain Text" format, and using the "Run Now" option, I receive the following error message "Error Message: Invalid export options. D:\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\OUT-PHOENIX.reportjobserver\~tmp17105a42ccb5ae4.rpt" I have enabled "Unmanaged Disk" capabilities within the ReportJobServer thru the CMC, and I have stopped and started the service. I still receive the error message...Help!

Hi Karla,
do you have any service packs installed on your BOBJ server? Does your destination folder reside on a network drive?
Regards,
Stratos

Open a Crystal Report preview using a button

Hello. I need to open a Crystal Report preview using a button from my add-on. I've already created my report, so I need to create the object, pass the parameters and open an screen with my preview. Does anyone has a C# example? Thank you.

hi,
this is code for open the crystal report press the button.
First import the crystal report using Report and layout manager
goto administration->setup->general--->Report and layout manager
create one button in add-on form.when we press the button the following event triggered.
get the docnumber for that particular form and pass it.
Case SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED
                        If pVal.ItemUID = "btnPrint" Then
                            Dim strAcNcmr As Integer
                            strAcNcmr = objForm.Items.Item("txtDocNo").Specific.Value
                            Dim oRS As SAPbobsCOM.Recordset
                            oRS = objSBOAPI.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                            oRS.DoQuery("SELECT MenuUID FROM OCMN WHERE Name = ' Purchase Indend' AND Type = 'C'")
                            objSBOAPI.SBO_Appln.ActivateMenuItem(oRS.Fields.Item(0).Value.ToString())
                            Dim oForm1 As SAPbouiCOM.Form
                            oForm1 = objSBOAPI.SBO_Appln.Forms.ActiveForm
                            oForm1.Items.Item("1000003").Specific.String = strAcNcmr
                            oForm1.Items.Item("1").Click()
                            oForm1.Items.Item("1").Visible = False
                            oForm1.Items.Item("2").Click()
                        End If
this is easy solution for open the crystal report for add-on form
Thanks & regards
B.lakshmi narayanan

Buttons not responding correctly

Help
I am trying to get a simulation to work but I have problems
with buttons not responding to actionscript properly.
Here is how I have it layed out:
I have a labels layer with 12 keyframes labeled scn2A,
scn2B...scn2L
I have a buttons layer with all of the buttons on it.
The buttons layer has 12 keyframes.
One button advance to the next frame, the other advances to
the next scene.
Each keyframe has the same buttons but different instance
names. scn2DwnA_btn, scn2DwnB_btn...scn2DwnK_btn.
The last keyframe uses a different button with an instance
name of scn2Ok_btn
here is the problem, when I test the movie everything works
fine until the last frame.
The DOWN button is used to advance each frame and then the OK
button is used to advance to the next scene
The down button has no script in the last frame but it is
advancing to the next scene upon a mouse click.
I would be glad to email source to anyone who would like to
help.
Thanks

The code is just basic button code:
scn3Ok_btn.onRelease = function...
all code for each button is on a frame in an actions layer.
each frame is a keyframe.
So frame one actions would reference the instance names for
the buttons in frame one of the timeline.
Frame two actions would reference the instance names for the
buttons in frame two of the timeline.

Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

You will not belive how I accidently solved this - !!!
Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
what a mad techno world we live in! :-)
Dave

RV220W reports the remote gateway is not responding.

Hi, I've just set-up one of the RV220W VPN solutions.
This worked fine for a while, but now it reports the remote gateway is not responding.
Other clients can connect, but not the computer I'm using at home.
Logfile reports:
2011/08/31 21:10:31 [STATUS]Success to connect.
2011/08/31 21:10:31 [STATUS]Tunnel is configured. Ping test is about to start.
2011/08/31 21:10:31 [STATUS]Verifying Network...
2011/08/31 21:10:37 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:10:40 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:10:43 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:10:46 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:10:49 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:11:01 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
2011/08/31 21:11:03 [STATUS]Disconnecting...
2011/08/31 21:11:07 [STATUS]Success to disconnect.
2011/08/31 21:15:07 [STATUS]OS Version: Windows 7
2011/08/31 21:15:07 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/08/31 21:15:07 [STATUS]Windows Firewall Private Profile Settings: ON
2011/08/31 21:15:07 [STATUS]Windows Firewall Private Profile Settings: ON
2011/08/31 21:15:07 [STATUS]One network interface detected with IP address 192.168.2.2
2011/08/31 21:15:07 [STATUS]Connecting...
2011/08/31 21:15:07 [DEBUG]Input VPN Server Address = 81.167.1.1
2011/08/31 21:15:07 [STATUS]Connecting to remote gateway with IP address: 81.167.1.1
2011/08/31 21:15:07 [WARNING]Server's certificate doesn't exist on your local computer.
2011/08/31 21:15:09 [STATUS]Remote gateway was reached by https ...
2011/08/31 21:15:09 [STATUS]Provisioning...
2011/08/31 21:15:17 [STATUS]Success to connect.
2011/08/31 21:15:17 [STATUS]Tunnel is configured. Ping test is about to start.
2011/08/31 21:15:17 [STATUS]Verifying Network...
2011/08/31 21:15:22 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:25 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:28 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:31 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:34 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:46 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
2011/08/31 21:16:49 [STATUS]Disconnecting...
2011/08/31 21:16:53 [STATUS]Success to disconnect.
I've tried the most common stuff.
Enabling ICMP, checked that remote administration runs on port 443, changed MTU to 1400 manually, It allows fragmented packages too.
Checked that IKE and IPSec services are running.
I've also tried both with windows firewall ON and OFF.
A collegue of mine had the same problem in the same timeframe as me, but after a while - he suddently was able to connect.
I still can't!!
Firmware Version:        1.0.2.4
Anyone got a fix for this?
Edit: IP is not real.

Ok, so I had a chat with Cisco - and it seems like the setup on the RV220W was done correctly and was working fine.
Showed me a few things that could come in handy checking out when running diag on the quickvpn.
I disabled all antivirus realtime checks, opened 443 and 500 inbound to my computer - checked that the QuickVPN.exe had an exception in the windows firewall, and that the firewall was enabled.
Also checked that the services was set tu Auto and Started.
Rebooted computer, and I was able to connect!
Now I'm working my way back to the setup I had, to figure out what went wrong in the first place.

After updating to iOS 6.0.1 volume button not responding even theirs no volume slider in music app nor video app plz help m using iPhone 4 os Windows 8

After updating to iOS 6.0.1 volume button not responding even theirs no volume slider in music app nor video app plz help m using iPhone 4 os Windows 8

I suppose that you can demand all you want. It would have to be proven that the iOS update broke this particular function but it could also be said that it was just a matter of time that the broken thing manifested itself. Since the phone is out of warranty, it could also be said that it is your risk to update software. I'm not trying to be argumentative here, but we are not Apple. We are users like you and just try and provide support to other users. What you decide to do from here is your decision. I've given you all I know to do.

Ringer icon staying on,volume raise button not responding ,unable to turn phone on/off,phone now dead.!

Ringer icon staying on,volume raise button not responding ,unable to turn phone on/off,phone now dead.!

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup.. Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 15 - 20 Seconds...
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

ITunes Music and Home button not responding

Itunes Music & Home button not responding all other content OK when music button clicked displays the following "The item you've requested is not currently available in the UK store"

I haven't read this whole post - in fact I almost stopped reading any of these post. I read all the horrors look over at my own phone (which is working correctly at the moment) and wonder when it is going to go belly up.
jyoz, Try doing a DFU and setting up as new. I don't believe that "Restore" goes deep enough to clear the bad code.
Do you also have poor battery life?
The reason I ask is I am starting to believe there is a piece of code that is corrupt and running at near 100% CPU usage.
If this is the case it sort of explains button, icons and poor battery life.
There is one other suggestion that I have read that says delete all email accounts and reset/erase all. Then go to DFU and setup as a new phone. This procedure probably gives you the best chance of clearing out the Bad Code Snippet. Just to defend all this crap that we have to go thru I did get an Apple/at&t support guy tell me that even "Push" on email is/does not always work correctly. Once he realized what he said I could not get him to talk about it anymore - Apple you gotta love-em.
I know you have been thru hoops trying to fix this but you only have two option take it to a store and don't leave until you get a new one that they have updated to 4.1 for you or try some of the extreme suggestion that I am repeating from other post.
Best of luck - and please remember sometime there are failure that you at home are just never going to fix - so if you don't feel like another Excedrin headache GO TO THE STORE AND EXCHANGE IT if for no other reason than to preserve you mental health.

Crystal Report 2008 - Save Report with Data

I saved a Crystal report with data in Dev Environment on BOE Server (Infoview Folder) and this is transported to Quality Environment. In the quality environment, when I try to view this report, initial screen comes up with data of Development, instead of Quality environment.
I am expecting that it will load the default data from Quality environment for the stored selection.
Is there any settings to be done in the report settings, so that i can view the saved report in Quality Environment with Quality Env data instead of Dev Env Data?

Thanks Don for the reply.
In case, If we save the report with data in Dev, we need to update DB configuration to point to Quality Env using "Use Custom databse Logon Information".
But when it gets transported to production (From Quality), it will show up Quality Envdata. So should i have to update the BOE in Q Environment, to point to Production and transport it?
Is there any automated way that the system will point to right systems appropriately based on transport landscape?
Does the functionality of "Save the report with data" used mainly for user friendliness for analysis in one environment and this functionality is not supported to move between environments?
rgds
Karthi

CS5.1 Save for Web & Devices not responding

I was turning a mov. file into a gif. When I was finished I went to save for web & devices and after it finished loading... the gif couldn't be seen but a coral pink box took the space. Then I get a message stateing that Adobe CS5.1 is not responding... Then it closes down the program. I'm able to make other gifs. Even ones with more frames.They all turn out to be fine. It's just this certain one I try to make that always ends up closeing down the program. The file size is 248MB and the gif I'm trying to make only needs 91 frames. I'm so confused. I even used the same mov. file and made a different gif from it and it worked perfectly! I've tried reinstalling but that didn't fix anything.
So hopefully someone out here will have some helpful information on how to fix this. Thanks!

What dimensions does the image have?
And what does
I was turning a mov. file into a gif.
mean exactly?

Crystal Report (visual studio 2005)-Hyperlink not working on exported PDF

I have created a crystal report by using VS 2005, there are some hyperlinks inside the report.
After i exported the report to PDF, I check the PDF file, none of the link contains inside the PDF file.
It seems a bug, i google this issue, some people can export to RTF first and then in RTF save as PDF, then the link should be there. I tried it, it works, but it totally mess up my report layout.
Please advise,
Tommy

Typing the terms "pdf export hyperlink crystal" in the search box at the top right corner of this page comes up with the following KB (5th hit):
[Hyperlinks to files do not work when exported to Portable Document Format (PDF)|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333633363337%7D.do].
"Messed" up report export to RTF does not tell me much either. A link to a screenshot will be great.
Also, what CR Service Pack are you on?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Crystal Reports 2011 - Product keycode is not valid INS00140

I ordered two copies of Crystal 2011 and neither keycode is working. My users are on Windwos XP Professional SP3.
I called in and was emailed the following instructions:
Click on link
Choose u201Csaveu201D
Save to a know spot
1.     Do not run the installation from archived package, extract the package first. Click on 51041020.ZIP and choose extract.
2.     Copy the installation package to hard drive if possible to avoid any networking issues.
3.     Once extracted, the Setup.exe file can be found in the \DATA_UNITS\Crystal Reports\ u2026folder
4.     Login to the machine as Local ADMINISTRATOR, if possible.
5.     Temporary disable any kind of firewall, antivirus, network security etc., if possible.
6.     Please note CR 2011 installation requires open port 4520 for communication. Blocked port 4520 may cause the following error
Microsoft Visual C++ Runtime Library
Runtime Error!
7.     On the latest versions of Windows, even if logged in As local Administrator, right-click setup.exe file and select "Run as Administrator". If you do
not have Administrator account, try right click "Run as" Select current user and uncheck the "Protect my computer and data from unauthorized
program activity".
8.     Make sure there is enough space on the computer. If not sure about the space, run "Custom" installation with minimum components. Nonmandatory
components could be added at any time
This did not work. I am still getting the error.

See the very first Sticky post in this forum for more info on how to fix the problem.
And Search on that error, lots of info...
Thank you
Don

Error:When adding RDC runtime library (Crystal report XI R2) to Lotus notes

Background : We have reporting feature implemented in one of lotus notes application using crystal reports 6 (OCX) and as Crystal report is going to be upgraded to CR XI version in my organisation, we need to implement the same using RDC component available in crystal XI . we have installed Crytal report XI R2 - SP 6 version for testing the integration.
we are referring a document available on SAP web site(attached below) that illustrates the steps required to integrate the Crystal Reports® Report Designer Component into a Lotus® Dominou2122 application. http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/509b02de-a81e-2b10-f598-822b6d6f2024?quicklink=index&overridelayout=true
Steps which have been outlined for adding runtime library in lotus domino application is shown below:-
1. In Domino Designer, add a Form to the application.
2. In the programmeru2019s pane, go to the (Declarations) handler of the Form and enter:
Dim App As Variant, Dim Rep As Variant
3. Select Create | Object and select the u201CControlu201D radio button in the u201CCreate Objectu201D dialog box that comes up. From the list of controls, select u201CCrystal Report Viewer Control.u201D This adds the control to the Form.
4. Click on the control and select Edit | Properties. In the u201CAppletu201D properties dialog, select the u201CSize object to fit windowu201D radio button and then close the properties dialog.
We are getting an error message while trying to add 'Crystal Report Viewer Control' control (illustated in Step 3 above) in the lotus notes form . Error message which we get is 'An error has occured while processing a request on an object'.
Alternatively , we created the object of Crystal Report Viewer on lotus notes form by adding viewer object file (Crviewer.dll) from the file system after selecting the u201CObject from a fileu201D radio button in the u201CCreate Objectu201D dialog box and added following code in the postopen event of lotus notes form .
Set m_Viewer = Source.GetObject("Crystal Report Viewer Control")
Set App = CreateObject("CrystalRuntime.Application")
Set Rep = App.OpenReport(u201Cc:lotus
otes
ep.rptu201D)
Set m_Viewer.ReportSource = Rep
Again, when lotus notes form is opened , it gives error 'Variant does not contain object' at 'Set m_Viewer.ReportSource = Rep' .
Can any one suggest us any workaround or if iit is not possible in CR XI R2 into a Lotus® Dominou2122 application. Also, can any one provide us sample code if CR 2008 version can be integatred with lotus notes.

I believe, Lotus was never a "supported" development platform, though it did work - at one time or another. Eventually it did not and you are at that point. I think it was CR 10 where it started to be impossible to add the viewer to Lotus. This was never fixed and we never did find out if this was a Lotus thing or a CR thing.
Re. CR 2008 and Lotus. The RDC has been retired in CR 2008, so no luck there either for you. The only SDKs available in CR 2008 are for .NET and Java.
Ludek

Issue with Print Properties button not responding in Adobe Reader 10.1.10

We've recently been upgrading Adobe Reader 9.4.4 to 10.1.10 and started having a few reports of the Print -> Properties box in Adobe Reader not responding. When this happens Adobe Reader will crash if you click on the Print button. If you go into Devices and Printers and try and access the Printer Properties you are prompted to install the driver for the device. It does seem to be quite random, it will work fine for days and the suddenly happen. I've done testing and have been able to get it happen by opening Outlook, Word or Excel but it is completely hit and miss. Sometimes the issue will happen and other times no matter how many times you open and close the various applications it's fine.
Fortunately it only seems to be an issue when accessing Properties, if you just print there are no options which is probably why we don't have more complaints. Unfortunately this didn't come to light until we'd rolled it out to 2000+ machines across 8 locations.
So far I've tried the following:
1. Upgraded to Adobe Reader 11.0.9 and same issue
2. Created a test print queue using a different print driver (my machine has a different driver again and is using a different print server)
3. Uninstalled a number of applications that have caused us issues with Office 2010 due to dodgy addins (Workshare and HP Filesite)
4. Rolled back to 9.4.4 and seems OK. Problem here is that they receive PDFs in formats not compatible with older than X.
System is Windows 7 Enterprise SP1 32bit, Office Professional 2010, printing is to Ricoh Equitrac (Follow You)
Anyone have a fix for this or come across this before. I'm going to try testing with a Postscript driver to see if that helps, which is the last item on Adobe's troubleshooting list.

Select a PDF file, CMD+I, check the Open With section, and ensure that AR is selected. If not, then select it and click on the Change All button. Alternatively, select Preview, which is my default PDF reader.

Crystal Reports 9 Save/Save As Buttons Not Responding

Similar Messages

Maybe you are looking for