Crystal tries to access the printer on the initial development machine ...

Post Author: duman
CA Forum: General
Hi,
I have following issue:
I developed many reports on my machine in Germany, by using a network printer.
Now that the reports are approved, they are installed on a citrix machine in boston.
Somehow loading of the reports in the citrix session took 3-10minutes, until the application poped up the parameter screen. After typing in the parameters opening the report took only view seconds.
On my local machine I did not have this problem. The reports were loaded quickly. The behavior on 5 different citrix servers were the same like the described one (each loading delayed 3-10 minutes ).
By tracing the processes in the citrix session I found out that the spooler.exe accessed my development printer in germany (shared printer \ slow network connection). The spooler loads the drivers on the server in germany, where the printer is.
Why does crystal by loading a report access the printer on which I developed?
Even if I change the printer in the pagepreferences of the report, crystal still tries to access my initial printer on which i developed. ??
Can anyone help me on this?
thanks
Duman

Well it seems from your error message that JDeveloper is trying to create this directory here:
C:/Documents and Settings/cyounger/Desktop/jdevstudio10134/jdev/system/oracle.j2ee.10.1.3.42.70/embedded-oc4j/applications/datatags.ear
This is probably failing because of the space in the path (i.e. Documents and Settings).
So the question is why is it trying to create the directory there if your JDeveloper is installed elsewhere.
I'm going to guess that you either have an environment setting pointing to this directory (maybe something like JDEV_USER_DIR) or it is because you upgraded from another JDeveloper install that used that directory. If this is the case I would suggest a fresh install of JDeveloper and to choose "NO" when asked if you want to upgrade from a previous installation.

Similar Messages

  • I am trying to access tax forms from the IRS.  I download them to my comuter and they read fine (version XI).  However, when iItry to open them on another computer (version 4) they will not open.  Version 4 opens all other documents fine, just no the ones

    I am trying to access tax forms from the IRS.  I download them to my comuter and they read fine (version XI).  However, when iItry to open them on another computer (version 4) they will not open.  Version 4 opens all other pdf documents fine, just not the ones from the IRS.  Any ideas?

    Version 4 is oh so old.
    The IRS and many other providers of forms are using products like LIveCycle which require at least version 7.05.
    Saving, Filling, and Printing PDF Files
    We use Adobe Acrobat PDF files as a means to electronically provide forms & publications. You will need to have the Adobe Reader software installed to access them (available FREE from the Adobe Reader download page on Adobe's Web site). We recommend using the most recent version of Adobe Reader.

  • When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer.  The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

    When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer.  The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem?  My printer does not have on-board Wi-Fi but, otherwise, works fine.  I shouldn't have to buy a new one.  Is there a OS patch out there that would open the printer port for my PC computers?

    I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected?  That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
    How is your network configured?  Bonjour as a protocol will NOT cross a router boundary.  If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
    You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router.  If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation.  The additional routers must be put into bridge mode, which is done differently depending on the router.  But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
    Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

  • HT1338 I'm trying to follow HP's instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can't "add" the printer to the print queue because I don't have a driver and you have to se

    I’m trying to follow HP’s instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can’t “add” the printer to the print queue because I don’t have a driver and you have to select a driver before the add button becomes active.  Therefore, the Mountain Lion software update doesn’t add driver software for the CP 1215 driver because I was unable to add the printer to the print queue. 

    This printer doesn't seem to be supported in ML:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=412187#N2043
    You could try the 1515 driver or use the Generic PostScript Printer PPD when adding the printer.
    Hope this helps.

  • HT2495 I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, but can't find the printer on the add printer and scan icon on preferences.

    I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
    Thanks,
    Ivette

    You would need to get the IP address of your printer then manually add a network print queue.
    To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address.

  • I have a MacBook purchased in 2009 with Snow Leopard. I tried to access "special characters" from the Finder menu and an intermittent blank pop ups and will not stop. It also happens when I run Word or Pages.

    The blank pop up began as I tried to access "special characters" from the finder menu. I restarted, turned off and restarted and it did not work. It interferes with any application because I cannot work fast. Every new step takes a few seconds longer such as saving, finding text, check spelling and many more. I am desperate to solve this. Thanks in advance for any help given.
    Consuelo Corretjer

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8  I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

    I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 
    I have downloaded the latest UFR II driver. (UK Version)
    I am trying to connect to the printer but the printer is not  appearing in my Print/Fax Preferences.
    When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
    Is there a problem with my Mac setup or maybe a setting in my printer?

    Mac UFR II Printmonitor
    UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
    MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
    Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
    Other Printers:
    Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

  • I'm trying to add a printer to my account, however when I enter the printer code, the website errors

    I'm trying to add a printer to my account for the first time.  However, when I enter the printer code, the website popup screen errors out and doesn't advance to the next function.  Any idea what's going on with this?

    Hi Dav_gigem,
    When did you print the ePrint info page?
    If it is ok with you please print another info page, and as soon as you print it please enter the code in the ePrint center.
    The reason i m asking you to do this is because the code expires within 24hrs.
    Thanks
    Josh.C
    Click on the BLUE KUDOS button on the left to say "Thanks"
    Although I am an HP employee, I am speaking for myself and not for HP.

  • When trying to access email I get the message "Cannot get Mail - The connection to the server failed". How do I resolve this?

    When trying to access email I get the message "Cannot get Mail - The connection to the server failed". How do I resolve this?

    google your mail providers settings and go over them 1 by 1 to make sure it's set correctly in your ipads mail account settings

  • Ready to throw the printer out the window!!!!!!!

    So i've been trying to update my portfolio and im ready to throw this printer out the window and probably never buy another HP product if someone cant help me fix this problem. Everytime i go to print whether its landscape or potrait it cuts the top of my photo off.  This is a new problem, its never happened before up until now.  I have spent days trying everything, ive tried printing it off my Samsung galaxy tab S.  My desktop.  i have tried resetting the printer, updated the software, troubleshooting, aligning, everything and have gone through $100 worth of ink to get nothing out of it.  I am very angry with this product.  what the hell is wrong with **bleep** thing?????? havent even owned it for a year!!!!!!

    Hello,  In the printing App that you are using, there should be an setting option to select the Paper Type and Size. Make sure you got that settings changed to the type and size of paper you are wanting to print on. I am not sure if you are  using the inbuilt app of Samsung to print or HP's ePrint & All in One Remote app . ? HP ePrint app is used for printing using.HP All in One Remote app is used for Scanning . Click HERE to access more info on this Apps.

  • T.code FBL5N: a problem with the print of the output list

    Hi All,
    with reference to the t.code FBL5N, I have  a problem with the print of the output list of the report.
    When I execute the print, I obtain one customer for each page printed.
    I wonder if is possible to obtain more customers for each page printed.
    Could anyone help me?
    Thanks
    Gandalf
    Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

    Hi,
    Though personally i havent tried this option, check the same
    Go to Menu: Settings >> Switch List
    This will make the value displayed in ALV format and then try taking print outs.
    Regards,
    Sridevi

  • Unable to verify the printer on the network

    Hi,
    I have a home IP network with an HP4100N network laser-printer connected via JetDirect card to a powerline device and then to a hub.
    Up until recently, all computers on my network could successfully print to the printer via the JetDirect card and IP (192.168.0.100).
    HOWEVER, my girlfriends MacBook Pro running Mac OX 10.9.5 suddenly stopped printing to the printer and things were just starting to build up in the print queue. The printer continues to print normally for everyone else on Mac and even a Windows 7 machine, eeek!
    Turning the printer on and off a couple of times, resetting the network etc, I then finally deleted the print queue and tried to setup a new connection to the printer again on her computer via the prefs and the IP JetDirect socket option (like I have done on all the other computers).
    When I enter the printer IP address into the Mac Printer & Scanners settings, Mac OS tried to interrogate printer model etc and it comes back with a Generic Postscript Printer profile and not the HP specific one. (Again, every other computer can setup fine at this point!)
    On her computer, when you try and install the printer with the wrong profile (or even the correct one if manually chosen), it eventually says:
    'Unable to verify the printer on your network'.
    Network utility:
    I then tried using the Network Utility to ping the printer from my laptop, this works.
    I tried to ping the printer from her computer, this doesn't work and it times out!
    then...
    I tried pinging her MBP from my MBP and this works. Then I pinged my MBP from her MBP, this works.
    So her computer is on the network, but is not able to see the printer.
    I then hard- IP'd a new IP address on the printer (just to rule this out), setup all the computers to this new printer, all worked well except for her computer, which once again couldn't see the printer. (I can't ping to it either again from her computer, even with the new IP!)
    I think I've tried all the obvious things, updating software, resetting things, turning the firewall off completely....but all to no avail.
    The problem, it seems to me, is with her MBP rather than with the network or the printer (as all other computers can print!).
    So...the million dollar question is... Can anyone tell me what is going on?! How do I get her computer to print to this printer again??
    thanks very much.

    Yeah, I would agree with you completely Greg, but the baffling thing is it just affects this one Mac. How come it routes 'selectively' so to speak? It works for everyone (incl. Windows 7 machine) but not for my GF's MBP... until such a time that it suddenly feels like working again (all by itself by the looks of things).
    You are right in saying that it defo appears to be some kind of routing problem, but I'm having difficulty in finding out where the problem actually is. Is it the router, the printer or her computer? Could it be the firewall on the router blocking it for her and not for others for some reason? If it was the router, you would expect it to tarnish everyone with the same brush, would you not?
    Whilst the HP printer has the static IP manually set up on that side (192.168.0.100), the router hasn't specifically been told that the printer has the .0.100 address hard coded into it I don't think, so there is a possibility for it to be going weird here. I'll need to look at the router config page tonight and just lock that 0.100 address to the MAC HW of the printer. Perhaps that will do the trick, but still wouldn't explain why it's doing it selectively just to that one computer (not even randomly to others on the network).
    I did try the safe boot too. Within that I ran Disk Utility to fix some file permission errors (there were some group permission problems for the new HP software that I had installed on her computer actually, which DU had fixed). Whilst running the utility, it did throw back issues about the EFI partition map being corrupted etc, but that seems to be a separate problem with the disk utility software not being able to run/fix from the disk it is being booted from, even in safe mode. But this is being discussed elsewhere on Apple Forums and I don't think it's connected to the IP problem I'm having.
    Whilst I was doing the Safe Boot thing, I got sidetracked (isn't that always the case when you troubleshoot) and didn't try and set the printer up within that environment, but instead was trying to figure out why I was getting the EFI partition Map errors. It turned into a late night and I had to hit the sack at some point...
    I tried IPP too. Putting the Printers IP into the address field on her computer didn't result in the HP Printer profile being selected when it tried to find the printer, this stayed as Generic PostScript. I didn't explore any further on that occasion to see if I could manually set it all up and print to it or if the set-up would just hang again. I figured if the IP address of the printer isn't visible to the computer (ie. no route to host), then changing to IPP wouldn't work either.
    I'll give these options another go tonight when I get my hands on her computer again.

  • Setup restrictions to the printer through the embaded network adapter

    I've recently prochesed an HP Officejet Pro K8600dn printer.
    I've connected the printer to the internet through the embaded network adapter and it worked perfectly. Howerver, the printer can be freely used by anyone in my network so i'm wondering if there's a way to block certain ip's or to configure any of that in the printer?
    Also, the EWS server that came with the printer works perfectly and i can access it through my web browser. I cannot find anything about configuring allowed or blocked ip's.
    Thanks in advance for any help.

    Not likely this printer is going to have that kind of security features.  You'd be looking at something like a logon feature or Kerberos Authentication (which requires a dedicated server).  This is just a simple open port that allows anything on the network to access the printer as long as it talks the right printer language. 
    That being said, the router configuration is a whole different animal.  With the printer set up with a static IP, your router might allow you to restrict traffic to that address.  You would need to check your router configuration or contact their support staff for assistance.
    insert signature here

  • When I try to print a test page The printer feeds the paper through the printer without printing

    My printer is set up and Windows XP Home SP3 recognizes it. I have checked the Device Manager to see if I had any conflicts.
    I didn't so I opened the print spooler and typed Test in Windows Notebook and hit print. It showed up in the print spooler but
    the printer located the edge of the page then fed the paper through.  I uninstalled the printer and Printer driver and also the software. After I rebooted Windows found the printer and let me load the drivers and I printed a test page afterward and it printed fine. But then it went back to just feeding the paper through.
    I have the latest windows installer version 4.5 running. All of Windows updates are up to date. I'm lost can anyone Help me

    '''bold text'''I've tried several different virtual pdf printer applications including:
    Foxit pdf printer
    doPDF v 7
    Nitro PDF driver v5
    NovaPDF
    Simpo PDF Creator
    qvPDF
    Virtual PDF Printer
    I took screenshots of the same small section of a sample pdf file saved to pdf using the virtual pdf printer freeware doPDF v7.
    Both test screenshots were taken on the same computer, a laptop running Vista Home Premium.
    You can clearly see the problem!

  • Under "Basic" in the "Printer Settings" of the Print menu, the dropdown menus for both "Page Setup: Sheet" and "Media Type" are frozen.

    Frozen selections: I'm working from my Intel iMac trying to print (from both Aperture and Photoshop CS5) to my new Epson 4900 printer. When the Print menu comes up, under the "Basic" section of the "Printer Settings" the dropdown menus for both "Page Setup" and "Media Type" won't activate. All other options and selections work fine. Just these 2 are not functioning. What's up with that??

    Here we are 15 months later and Microsoft Excel 2013 has the SAME ERROR
    If one chooses:
    Print Preview
    Page Setup
    Sheet
    Then the print area and print titles (Rows to repeat at top, columns to repeat at top)
    are all grayed out and cannot be selected.
    If, however, I choose the
    page layout bar and click print titles then
    everything works fine.
    Thanks for the solution!!!

Maybe you are looking for

  • How do I update Fireworks?

    Just began reading the OnDemand book re DW. I have CS 5.5 Mac. Totally a beginner with it, so this is basic. It appeared in random reading that Fireworks has a function in DW that a similar utility app has in GL: that is, converting images to web-rea

  • SOAP performance issue

    Hi, My problem is that the NE I am connecting to was exposing its interfaces as LDAP and now they are changing those interfaces as SOAP. We are getting a very high load and I feel that since LDAP is optimized for fast read-speeds, replacing the LDAP

  • How to open multiple RAW images in Elements 7

    With Elements 5 I can open any number of RAW images and process each one separately, one at a time, applying corrections to each image individually in the RAW dialogue, clicking Open Image, repeat.  When done each image is in the work space, allowing

  • Changing the background box color of mail form

    Well I have this code, that maybe is faulty but is working and I want to know if is possible to change the background color of the three first boxes (Nombre, name, email). The problem is if you open it with Coda or similar that the background color o

  • Oracle golden gate

    hi IS there any doc to explain the checkpointing in golden gate in detail. How GG manages transaction integrity in case there is corruption of trail files in the source or target end. Is there any checkpoint table in the source end as well as there i