Cs6: Masking mode doesn't function - can paint the selection correctly - but then clicking the masking tool icon - nor selection ist made. Can I repair that?

Can I repair that?
Repair what? Your description seems a bit unclear, maybe posting a few screenshots can help clarify the issue.
Are you talking about Quick Mask Mode?

Similar Messages

TS1702 I bought a budget sheet app from the apple store, there is no option of sub category given and therefore the app doesn't function can I get its money back ?

I bought a budget sheet app from the apple store, there is no option of sub category given and therefore the app doesn't function can I get its money back ?

Actually, wrong.
The tech support people can help with Playbook purchased apps. If you've called and they said they cannot, you were lied to.
Even in the link you posted, in #10, it states clearly "App Refund related matters are handled by BlackBerry Customer Care." That, my friend is accessed by the support number. Again, if you were told otherwise, you should inform them of such or ask for a manage/supervisor.
And, you don't have a "Partner ID" because you are not a "Partner". The section you're referring to applies to mobile providers, which are the Partners.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I see noticed that other peoples notification bar tell them information like your this many minutes away from your house or it's this many degrees outside and stuff like that but mine doesn't how can I turn that type of stuff on?

I see noticed that other peoples notification bar tell them information like your this many minutes away from your house or it's this many degrees outside and stuff like that but mine doesn't how can I turn that type of stuff on?

Ask these people what Apps they've installed that provides those features. Once you find out 'buy' those apps, install them and configure them to notify you of that information.

I simply can no longer locate the T, the text tool icon on the tool bar in PSE 12

I simply can no longer find the T, the text tool icon. In fact the whole tool bar seems greatly altered and reduced. Adobe help states that I need merely to "select the Horizontal or Vertical Text Icon" but they are nowhere to be seen, thus cannot be selected.
There must be some different view option, I assume.
I also assume that this is an easy fix.

Are you sure you're in Expert mode? If not, click the word Expert at the top of the PSE window.

I know my Apple ID and password is correct, but then I enter them to activate FaceTime it says one of them is wrong. Can anyone help?

I know my Apple ID and password is correct, but then I enter them to activate FaceTime it says one of them is wrong. Can anyone help?

iMessage and FaceTime are currently experiencing problems it's nothing that you are doing wrong. Just wait it out and check back for iCloud status.
http://www.apple.com/support/icloud/systemstatus/

I buy extension from adobe online, i installed it correctly but then the extension menu was greyed out and i can't click it. Some help please.

I buy extension from adobe online, i installed it correctly but then the extension menu was greyed out and i can't click it. Some help please.

hello ptbruce, you probably only selected to open (not save) the video which will download it into windows temporary folder where it gets deleted again after it has been used. <br>you could try to right-click the entry in the firefox download manager and copy the link of the source file and try if you can download it through this url again. otherwise you'll have to contact the vendor of the video to find a solution...

Layer mass will let paint black to reveal but I click on white and paint it won't conceal

With my layer mask when I paint with black it reveals but when I paint in white it won't conceal.

t5179 wrote:
You all not understanding I was able to switch between to either hide or reveal then I was only able to reveal my brush size is the same and my flow is the same but it not working when switch to white.
It could be your not understanding what we write either. Many here are experts on using Photoshop and masking. It clear Masking is not working for you the way you want the way you state it use to work. Therefore something has changed in your setup. You stated that black use to reveal and and white hide. In reality black does both hides and reveal. It hides areas in the layer the layer mask is on which reveals what is in lower visible layers. You state white reveals again it does both it reveals and it hides. If the current layer mask was hiding area in the layer its on which reveals what is in lower visible layers when you paint with white it will hide what is in lower layer by revealing what is in the layer it on. Layer masks are like a stencil Black cuts out what is in the layer white leave what is in the layer there. Also visible layers above a masked layer can hide all layer below and any effect a lower layer mask may cause.
As Noel wrote some screen grabs showing your image window, layers palette showing layers and target layer mask, tool pallet and tools option bar for your brush tool active and the areas your painting Black and White and will enable some here to help point the way and shade light on your problem.

I have problems with the language when i install i put another language how can i repair that

I need help because i was instaling first time my apple tv and whm i was going to select my language y press another one that i dont undestand , please can some one help me with this ?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Illustrator CS6 crashes ,on my mac, when I use the gradient tool. Any help out there?

My illustrator cs6 crashes when I use the gradient tool. I'm using a mac with mac os 10.9.3.
This driving me mad... any help out there?

mr.roo,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

If I open a second window in Safari it doesn't have the home page icon nor does it have the back and forward arrows. Why not?

How do I get a second Safari page with the home page icon and back and to arrowsl?

Move to the desktop or rename the com.apple.Safari.plist
Found in your User/Library/Preferences/
Finder>Go>Go to Folder (copy and paste:)
~/Library/Preferences/com.apple.Safari.plist
Quit and restart the browser. The default plist will be rebuilt. See if this sorts your problem.
If no you can always put back the original plist, no harm done.

My screen zooms in randomly, I can go to View and and hit actual size and it quickly corrects but then will repeat this on and off daily.

My screen zooms in randomly, I correct it my gloing to VIEW and hit actual size which corrects it but then it does the same thing on and off daily. How do I correct it for good?

Chances are you are using a mouse and are accidentally turning on screen zoom with the mouse. Please look at the Mouse Preferences and change the zoom feature if needed. Another possiblity is you are turning on Zoom accidentaly by key strokes. You can set Zoom to Off is System Preferences - Universal Access - Seeing - check Zoom to Off position. The keystroke command for Zoom on-off is Option Command 8 or FN F11. One last possibility is you are typing Command + which zooms, Command - will unzoom.

InDesign 2014 doesn't allow access to the Text tool

I installed the 2014 update for InDesign and started work on an existing book project (about 70 pages in extent), replacing some of the graphics on the cover with eps files from Bridge. I can select the title and subtitle on the cover page too. But when I moved to the next page that I had not yet touched since installing ID 2014, I found the Text toll was not working. All it does is draw a box, but I can no longer click on text and work on it.
I copied all the content on the cover page, quit ID 2014, opened ID 9.2.2.103 using an older version of the document, and pasted the changes into the old document. ID 9.2.2 works just fine, but each time I try using ID 2014 (v. 10.0.0.70), the same problem happens again.
I have tried re-starting, starting in Safe Boot mode, exporting the file as .idml and re-opening it in ID 2014, but it is the same old bug all over.
Any others have the same or similar experience, and any explanations and solutions to offer?

I'll answer my own question now that it is solved:
Deleting ~/library/Preferences and /Caches didn't solve the problem. In fact none of the suggestions helped. What really helped was to go to find the locked layer for all the pages and unlock it!
ID 2014 set up a new view for my layout, and the layers tab was in a new place, and not it's full length anymore, so the locked layer wasn't visible like I was used to, but it was there nevertheless.
What's the old saying about the source of the problem (and the solution) usually being found not too far from the front of the screen...

Why is the brush tool in Illustrator CC inferior to the brush tool in CS6? It has less control of fidelity and smoothness. It is terrible - and I'm an illustrator. Can I use the CS6 brush engin in CC?

I loved the brush tool in CS6 Illustrator- by turning fidelity to the lowest setting, and smoothness down to zero, pumping up pressure sensitivity, it accurately reproduced the fine shapes of a drawn stroke. I'm an illustrator, so I don't want artificially smoothed curves, I want the line I drew.
This works really well with my Wacom Cintiq tablet... but now CC has removed this level of customisation for the brush tool. WHY? The program is called Illustrator, and as an illustrator, I can tell you having an accurate and finely adjustable brush engine to illustrate with is very important to me and to lots of other people who can draw, and draw for a living.
Now you get this dumbed down control panel when you double click on the brush tool icon- just one slider, with only 4 steps from 'accurate' (not very) to 'smooth' (almost indistiguishable from 'accurate')... it is like I have contracted a nerve disease - I draw a line, and it forms into something quite different to the path my pen took. WHY? Can I get rid of this rubbish engine? Trying the blob brush - what is the point of this brush? It is just like the old brush, except for a cursor that shows the largest size for pressure sensitivity... and it has the same crude 4 step smooth/accurate adjuster, that doesn't change the line much at all. I have the latest driver in my Cintiq, so I don't think that is the issue, and CS6 works better than CC.
I am very disappointed, Adobe. Do I have to go back to CS6 for all my Illustration work? Please improve the CC brush tool controls.
I am still reeling from Adobe's quiet removal of a whole tool: Inverse Kinematics/Bone tool from Flash CC JUST when I was finally using it to animate, but that's another story.
Honestly, having use them for a while, Photoshop,
Illlustrator, InDesign and Flash CC are, as far as I can tell, no step up at all from CS6, except that you have to pay for them forever.

More on this, now becoming known as the CC pencil tool fiasco, on these fora:
Re: PLEASE PLEASE adobe. The new pencil tool has become unusuble to me
Re: Changing line fidelity with CS6 Brush Tool
Re: All pressure sensitive brush presets gone!
If you are affected by the lower accuracy controls for CC's brush or pencil tools, use this Bug report/Feature request form to let the folks at Adobe know- they are actually hopefully going to fix this.......
thanks to Daniel for setting this up:
hey all, if you are going to file a bug report (as per Neeraj's suggestion), i've made up a draft to make the process easier. feel free to adjust it as much as you want, obviously; trying to equip us busy folk.
Obviously customer service & product development are two different departments, so if you're bummin out on the new functionality, submit a bug report!
link to submit bug report:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
******BUG******
Concise problem statement:
I was told to by Neeraj N(staff) to report this issue based on this link : (http://forums.adobe.com/message/6065706).
The Pencil / Brush tools have lost essential functionality with the addition of the new accurate / smooth adjustment preset. Users are no longer able to specify high-accuracy pen mapping, as the finest accuracy setting is now set to 2.5px (legacy versions allowed accuracy to .5px).
I would think adding additional slider nodes to allow more accurate mapping (while still using the accurate / smooth preset) allow for a minimal change in programming with a maximum return for power users.
Steps to reproduce bug:
1. open illustrator
2. use either pencil or brush tool.
3. draw erratic and high detail shapes
Results: shapes are smoothed to 2.5px smoothness, even when the accurate / smooth adjustment preset is set to full accuracy.
Expected results: shapes have minimal / no smoothing to maintain the integrity of the artwork.
Thank you for your consideration.

Xsan Doesn't Mount One of the Volumes

Hi,
We have two volumes on Xsan. When we mount it, one of the volumes doesn't show up. But it did yesterday.
We have one MDC and one client. We have a raid storage through fiber. The problem started after we have restarted the storage which was not responding.
Everything is alright on the storage side. Both MDC and the client can detect the Xsan's Luns when I check it on disk utility, and on terminal "diskutil list" command.
On Xsan Admin, volumes, Luns, seems alright. I don't get any errors when mounting.
I can't see the volume in /Volumes.
I have tried full system shutdown and powerin up in a proper order several times.
I haven't renamed volumes.
I can see both volumes on cvadmin.
The same problem occurs on both MDC and the client.
I have tried replacing the_not_mounting_volume.cfg file from my backup files.
There is no fiber switch in the between.
There is only MDC and client machines on the network.
I have tried flushing dns also.
I see "vote call for FSS inhibited" logs for the volume in the log files.
Actually nothing has changed in the system. Even a single line of configuration.
I have been digging internet for the last 6 hours, but couldn't find anything helping.
Regards
C.

I can mount/unmount the volume manually using "xsanctl mount/unmount volume_name" command. For some reason, it doesn't mount it through the Xsan Admin GUI.
Does anyone have any idea about that?

TS3274 In my iPad's Photo folder, after I select edit, and apply check marks to specific photos, the red 'Delete' button does not function. How do I correct this issues?

To anyone familiar with iPad 2s,
After I select the Sunflower Photo icon and touch 'Edit', apply check marks to specific photos I want deleted, the red 'Delete button doesn't function. How do I correct this?
Thanks

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

Cs6: Masking mode doesn't function - can paint the selection correctly - but then clicking the masking tool icon - nor selection ist made. Can I repair that?

Similar Messages

Maybe you are looking for