CSCup97267 - RV220W Router hangs intermittently and sometimes reboots

Really, are you serious?? The only fix is to reboot the router, and there are no plans to fix the problem? I would not be expecting that kind of answer from a world class vendor. Come on Cisco, you can do better than that.

Sorry Winston these articles you have the posted links to, don't help as they are all wifi related and my ATV is connected over Ethernet cable, direct into my Netgear gigabit router model wndr3700.
I have not had the problems with the ATV until the last couple of firmware updates and other devices on my network are working fine (both wired and wireless connections) have no issues. Everything works and streams fine but randomly and every now and then when navigating around the ATV interface the thing just suddenly freezes and then appears to reboot... It only happens now and then and in different places. It particularly happens if I keep pressing the remotes up/down/left/right navigation buttons several times in quick succession.
It's like the interface is trying to catch up with my key presses, approx 3 or 4 presses in a row and the ATV gives up and reboots. That's the best way I can describe it. Like I say it has only occurred since the last couple of updates.... Prior to that the interface was quick and smooth and quick navigation was not a problem.

Similar Messages

FDB hangs intermittently and needs to be killed

Hey,
Do you guys have any idea what may cause this issue?
Sometimes when you publish a project, the debugger says it is ready, and Flash Player 10 is running, but its window never appears. When trying to compile again, the OS reports that the SWF file is locked.
The problem does not occur with Flash Player 9, but I have been able to repeat this issue with every version of Flash Player 10, using the external debug player on Windows. It happens intermittently so it is very hard to track down.
For what I know, Java (running mxmlc/fcsh/fdb) gets hung up. It sometimes starts working again if you kill every instance of FlashPlayer.exe ... ending the current debug session. It also starts to work if you kill every instance of Java.exe and try again.
I have not seen this issue when debugging by hand. The issue appears to be with the combination of Java and the Flash 10 player, and I have the feeling that it occurs because of something happening too quickly. Yes, I am using FlashDevelop, but it should not matter. FlashDevelop compiles the SWF, copies the result to the target directory, starts the debugger, then launches the external player when the debugger is ready. It offers the same commands I give the debugger by hand, so maybe Flash Player 10 has some kind of "warm up" period which sometimes gets the best of the debugger. Either way, FlashDevelop launches FDB, waits for the prompt, and offers commands.
Does Flex Builder use the same apps as the Flex SDK? Perhaps it does not occur because FlashDevelop runs faster. The problem is more likely to occur with bigger, more complicated files. Perhaps Flash Player 10 loads up, reports itself as ready, but still has to load up code. If for some reason this initialization stage takes a frame too long, FDB tries to talk to it as if it were ready, but its come through just too soon.
You can see more details about this here:
http://www.flashdevelop.org/community/viewtopic.php?f=6&t=4707
It's been over two years since I started having this issue. I stuck with Flash Player 9 for a long time because of it. Now that I use Flash Player 10 for all my projects, it feels like its time to try and figure out what's going on here. It's easy to pass the buck and say its a FlashDevelop problem, but that really is not what I am seeing ... and if FlashDevelop had to do something different, like add an artificial pause to wait for Flash Player to initialize, it would at least be helpful to know what needs to be done to negotiate the debugger without hanging it.
I appreciate your help and I don't mean to come across as confrontational if I sound that way. I'm just hoping to get down to a real answer and not assume that this is "just the way things are"
Thank you!

I have a few thoughts. For one thing, reading through the thread over on flashdevelop.org, some (and perhaps all) of the problems people encountered were due to a bug in the Flash player, which was fixed this past summer. (The Flash Builder record of the bug is here: http://bugs.adobe.com/jira/browse/FB-16153 -- but the bug was actually in the player.)
So please make sure you have the latest debugger version of the Flash player. You can get the latest version here: http://www.adobe.com/support/flashplayer/downloads.html
That is almost certainly the cause of the "WARNING: The Player that you are using does not support all fdb commands" message that member "elyon" described in his post on June 4, 2009. Hopefully it will help with whatever problems you are running into.
In another post that same day, elyon saw this output from FDB:
Adobe fdb (Flash Player Debugger) [build 4852]
Copyright (c) 2004-2007 Adobe, Inc. All rights reserved.
Waiting for Player to connect
Player connected; session starting.
Unexpected error while processing command.
For diagnostic purposes stack trace follows:
But apparently there was no stack after that message. If you can reproduce that error message, the way to get stack dumps to appear is to pass "-Dtrace.error=true" to Java when it launches FDB. This is a Java property, so it must be passed as an argument to Java, not to FDB. For example, if launching FDB from the command line, you can launch it like this:
java -Dtrace.error=true fdb.jar
> Does Flex Builder use the same apps as the Flex SDK?
Yes, but not in quite the same way FlashDevelop does. FDB has a public Java API that can be called by any Java app to control debugging, and that's what Flex Builder does, unlike FlashDevelop's approach. So, FlashDevelop and Flex Builder are using the exact same underlying debugger code; it's possible that there is some sort of problem with FlashDevelop's communication over the pipe, I just don't know.
You say you haven't seen this issue when "debugging by hand" -- you mean when using FDB directly? If so, then I suppose the Flash player version isn't the problem. I'd be interested to see a repro case that involved just FDB (perhaps reading commands from a file or a pipe if that's the easiest way to reproduce it).
There is nothing unusual about FDB's communication with stdin and stdout, it's pretty standard stuff. Also, it's all open source, http://opensource.adobe.com, so you can debug it if you want.
- Mike Morearty
Flash Builder team

Often my screen goes blank or into sleep mode even after seconds of use.I have to reboot and sometimes reboot more than once to get a pic

My monitor will go to blank screen for no reason....and I cant get it back without rebooting sometimes 3x.
I tried various monitors...same problem
New video card?

My monitor will go to blank screen for no reason....and I cant get it back without rebooting sometimes 3x.
I tried various monitors...same problem
New video card?

WRT54GX SRX router hangs intermittently

I bought the WRT54GX SRX router two months ago. The router always hang and needs to be power on and off to get it connected again.
WRT54GX SRX
firmware version 2.00.14
Setting for the router is
wireless channel = 11
wireless mode = mixed.
I read from some post that SSID broadcast needs to be turn on. Mine is currently off. I do not think that this is a problem. Will the folks at linksys comment on this?
Thanks
I would appreciate some help. Thanks

Microsoft recommends that you do not configure access points as non-broadcast (hidden) networks; by default Wireless SSID Broadcasting is enabled.
I searched Microsoft Knowledgebase for "SSID Broadcasting" and found the articles below (and others) about problems than can arise when you disable this setting... (details at link below)
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=40721#M40721
Lilla
Message Edited by Lilla on 05-11-200707:08 PM
Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE

2009 15" MacBook Pro is sluggish and sometime reboots in the middle of work

Hey everybody.
Just got my repaired (liquid on keyboard ) 15" MacBook Pro back from the Apple Store a few weeks ago. I haven't upgraded anything since, but now the screen frequently gives me the "rainbow beachball" icon and everything stops for several minutes. On three occasions (including moments ago!), the laptop simply rebooted. Thankfully, I had just done a command-S to save my work in progress.
Two days ago I rebooted from a CD and ran Disk Utility which DID find some errors and declared them fixed. After some rainbow beachballs last night, I ran Disk Utility again from the hard drive and it did find some permissions that needed to be repaired. With this latest crash, I felt that I should reach out for other ideas.
Any thoughts why I'm having these problems?

Call the Apple Store that repaired it. You need to advise them that you are having "issues."

Randomly Hangs/Freezes and Sometimes Crashes

Within the last 2 weeks, I've noticed this problem. It happens on various websites and numerous times while on computer (approx every 1/2-1 hr) It stops responding for about 30-60 secs.
i haven't done anything different to my computer, i also haven't upgraded to FF6 yet, still running at 5. i read that people are having the same issue with FF6.
any advice??

Within the last 2 weeks, I've noticed this problem. It happens on various websites and numerous times while on computer (approx every 1/2-1 hr) It stops responding for about 30-60 secs.
i haven't done anything different to my computer, i also haven't upgraded to FF6 yet, still running at 5. i read that people are having the same issue with FF6.
any advice??

Citrix the screens hang intermittently

We have an Oracle 9205 database running on Windows 2003 server.
We are web deploying our application using Oracle9IAS 10222; we are using the forms listener servlet including Developer6i Patch 16. The version of Jinitiator is 1.3.1.17.
When deploying this via Citrix the screens hang intermittently and users are forced to log out of citrix and log back in. Interestingly Oracle Financial's is running fine on the same box.
Pls, do let me know how to resolve this issue
Rgds,
Satya

The use of Citrix or any terminal emulation software with Forms is not supported. In most cases, it is determined that the cause of these types of problems are the result of the emulation software (Citrix in your case) and not Oracle Forms. It is recommended that you retest in a non-Citrix environment. If the problem is no longer reproducible you should then contact the Citrix vendor.
To be a valid, supported Forms user (client) the client machine must have a browser and Jintiator (JRE) install on their local machine. It is also required that the browser cache and JRE cache are stored locally.
Ref. Metalink Doc ID# 68047.1

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

need help uninstalling ios8 and going back to 7 where things worked please.

FireFox hangs up for a long time on most pages and sometimes never loads them. This is new phenomenon. What can I do to resolve this issue?

I attempt to open up a site. Firefox hangs for a 20-30 seconds on most sites and sometimes never opens the page, despite leaving it open for a long, long time. I find that if I go up to the address bar and hit "enter" on the page I'm trying to go to that most of the time I can then load the page after a couple of tries. This is obviously annoying and never used to happen. I'm looking for a fix. Thanks!

I had done that already. I brought it down to 30, which was recommended in another thread.
For most sites, Firefox works fine. But some of the primary sites I use for work hang up for long periods of time and frequently never load. I've tested the same sites with other browsers and they load quickly, so it is a Firefox issue.
Please help me keep Firefox! Thanks!!

HT1338 Facebook doesn't open in safari on my MacBook Pro, why? Sometimes it opens and aftersome time just hang on and after that doesn't open at all.

Facebook doesn't open in safari on my MacBook Pro, why? Sometimes it opens and aftersome time just hang on and after that doesn't open at all.

There seems to be a few bugs with iCloud Mail at times, so send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Apple support article, but I don't think it really addresses your problem.
iCloud - Mail Troubleshooting

When I am on a call and I come to hang up, the phone which when to my ear has a black screen, starts to light up then blacks out intermittently and in the brief moments it is lit up, the hang up button doesn't work unless I press home or lock buttons firs

When I am on a call and I come to hang up, the phone which when to my ear has a black screen, starts to light up so I can see and click the hang up button, but it then blacks out intermittently and in the brief moments it is lit up, the hang up button doesn't work unless I press the home or lock buttons first

Wow- thanks Jim! I removed the case and voila... it worked. Knock on wood that you solved my problem with such an incredibly simple solution. I'll find out where this proximity sensor is and make sure my case does not interfere with it.
Thanks so much.
Annick

My iPhone 5 constanlty reboots, sometimes the screen turns blue and the unit reboots and sometimes it just shuts down. Any Suggestions?

My iPhone 5 constanlty reboots, sometimes the screen turns blue and the unit reboots and sometimes it just shuts down. Any Suggestions?

I am having the same problem with my ipad air but mine is so severe that it's just rebooting non stop. I guess the battery will die eventually but it has rendered the device useless. I guess I will be taking it back to apple. Very disappointed. Never had an apple product in 20yrs have such a severe problem.

I upgraded my iPAD 1 and now it will not connect to my wi-fi. It does not ask for password. It does recognize wi-fi name. I have rebooted, unplugged router, 'forget network', and reset network. Still will not connect.

I have no idea what to try next. Please help!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Firefox gets slow after awhile and also hangs and sometimes i get plugin-container.exe error

Hello, it's a while that Firefox gets slow and also hangs and sometimes i get plugin-container.exe error...
I'm not sure but maybe it often happens after monitor goes to Screen Saver or after it turns off...
Error signature
AppName: plugin-container.exe AppVer:1.2.9.3951
ModVer: 5.1.2600.5512 Offset:0000100b

You can run Java in Firefox.exe instead of plugin-container.exe, but I'm not sure that actually would be better than where you are now.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''java''' and pause while the list is filtered
(3) If '''dom.ipc.plugins.java.enabled''' is true (bolded), right-click it and choose Reset (or double-click it to toggle).
If that value already is false, you might be having a problem with another common plugin such as Flash.

New desktop hangs, freezes, and reboots randomly.

Per the "Note Before Posting", here is my data.
Product Name/Number: HP Pavilion HPE-H8-1234 Desktop
Operating System: Windows 7 64-bit
Error message: None
Changes made: None. Out-of-the-box failures. Initial setup.
I just purchased an HP Pavilion HPE-H8-1234 Refubished Desktop (included with a 90 day warranty from HP). It arrived at my apartment yesterday. During the initial setup (within 5 minutes of turning on the machine), the computer hung, froze, and then rebooted itself. I spent much of last night updating the OS via Windows Update and repeatedly had the same problem. This probably happened 8 or so times over the course of an evening.
Are there any known issues with this computer that can be easily solved?
I think this may be a defective product.
Any information or help on either fixing the issue or returning the desktop would be appreciated.
Thanks in advance!

Follow-up, in case anyone in the future has similar issues and receives no support on the forums.
After three days of misbehavior, this computer is on its way back to HP.
Upon getting home from work the second day, I found the computer to be in a state where it had tried to reboot itself but could not make it back up. It was at the initial startup screen with three errors.
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM
ERROR: No boot disk has been detected or the disk has failed.
Per chat request, they had me run a BIOS-based "DPS Self-test" on the hard drive. This was comprised of two tests, the first one relatively short (10 minutes or so) and the second one rather long (2 hours). The test came back as successful.
Next chat service had me use System Recovery to restore the hard drive to the factory state is was in the day before, when I got it. This succeeded, but shortly thereafter the computer exhibited the same problems. Random lockups, crashes, and reboots. Sometimes able to recover back into Windows, sometimes not.
I then emailed HP support, and they asked me to check the cables by removing and replacing them from the hard drive. They sent me full instructions on how to open the computer, remove, and replace the hard drive. This did not resolve the problem.
After this, they had me reset the BIOS settings. This too did not resolve the problem.
Upon reporting these results to HP via email, they instructed me to do the BIOS DPS Self Test and System Recovery. I had already spent nearly 4 hours the previous night doing these things, but I don't think the email support representative had read the chat logs I'd mentioned. After informing email support of these things, they agreed I did not need to do this again and began the process of setting up a return for the desktop.
It looks like it will take 3-5 business days for the shipping supplies to arrive, then the time for me to ship the desktop back to them, then another 5-7 business days of repair at HP, then the shipping time thereafter for the desktop to be returned to me. I therefore estimate the total time between my original purchase of the computer and me receiving a working desktop to be on the order of 1 month. Frustrating indeed, but I guess that's how the cookie crumbles.
Either way, I'm looking forward to having this new computer up and running. It's too bad this one ended up being such a lemon, but once it's working I'm sure I'll be a happy camper.

CSCup97267 - RV220W Router hangs intermittently and sometimes reboots

Similar Messages

Maybe you are looking for